← Commit history
README.mdadded+49@@ -0,0 +1,49 @@+# M95040-WMN6TP++**STMicroelectronics** · EEPROM · SOIC-8++M95040-WMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | S | input | Chip Select (active-low). Driving S low selects the device and places it in Active Power mode; when S is high the device is deselected and Q is high-impedance. A falling edge on S is required after power-up before the first instruction; the S line should track VCC via a pull-up (typ. 100 kΩ) during power-up/down and must not float. |+| 2 | Q | output | Serial Data Output (MISO). Data is shifted out MSB-first on the falling edge of Serial Clock (C). Output is high-impedance when the device is deselected or in the Hold condition. |+| 3 | W | input | Write Protect (active-low). When W is held low, writes to the memory array (and to the Status Register when SRWD=1) are disabled while other operations remain enabled. W must be driven high or low - do not leave floating. |+| 4 | VSS | power_in | Ground reference for the VCC supply voltage. Connect to system ground; decouple VCC to VSS with ~10-100 nF close to the package pins. |+| 5 | D | input | Serial Data Input (MOSI). Receives instructions, addresses, and write data MSB-first; values are latched on the rising edge of Serial Clock (C). |+| 6 | C | input | Serial Clock (SCK). Provides the timing for the serial interface; supports SPI modes (CPOL=0, CPHA=0) and (CPOL=1, CPHA=1) up to 20 MHz. D is sampled on the rising edge, Q changes on the falling edge. An external pull-down (typ. 100 kΩ) is recommended so C stays low if all SPI signals go high-impedance. |+| 7 | HOLD | input | Hold (active-low). Pauses serial communication with the device without deselecting it: while HOLD is low with S also low, Q is high-impedance and D and C are Don't Care. To enter Hold, drive HOLD low while C is low; to exit, drive HOLD high while C is low. Must be driven high or low - do not leave floating. |+| 8 | VCC | power_in | Supply voltage input, 2.5 V to 5.5 V for the -W voltage grade. Must be stable within [VCC(min), VCC(max)] before issuing instructions; a power-on-reset (POR) holds the device inactive until VCC crosses the VRES threshold. Decouple to VSS with ~10-100 nF close to the package. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOIC-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `M95040-WMN6TP`+- `M95040-WMN6TPDW`+- `M95040-WMN6TPMC`++## CAD (KiCad official)++- Symbol: `M95040-WMN6TP`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/m95040-wmn6tp.pdf) (None pp, sha256 `1b7ee07d5879b564`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m95040-wmn6tp-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "m95040-wmn6tp",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "m95040-wmn6tp"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "m95040-wmn6tp.kicad_sym",+ "m95040-wmn6tp.kicad_mod",+ "m95040-wmn6tp.glb",+ "m95040-wmn6tp.step",+ "m95040-wmn6tp.lbr",+ "docs/hero.png",+ "docs/m95040-wmn6tp-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}