component
M93S46-WMN6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# M93S46-WMN6TP++**STMicroelectronics** · EEPROM · SOP-8++M93S46-WMN6TP from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | S | input | Chip select input; low deselects the device and puts Q in high impedance (Standby mode unless a write is in progress), high selects it in Active Power mode. |+| 2 | C | input | Serial clock input that times the interface, latching D on the rising edge, with a maximum clock frequency of 2 MHz. |+| 3 | D | input | Serial data input that receives instructions, addresses and data to be written, latched on the rising edge of C. |+| 4 | Q | tri_state | Serial data output that shifts data out on the rising edge of C, is high impedance when S is low, and gives Ready/Busy status during writes. |+| 5 | VSS | power_in | Ground, the reference for the VCC supply voltage. |+| 6 | W | input | Write protect input; when held low writes to memory are disabled, and it must be driven high or low and not left floating. |+| 7 | PRE | input | Protection register enable input that must be driven high before and during instructions accessing the Protection Register. |+| 8 | VCC | power_in | Supply voltage of 2.5 V to 5.5 V, to be decoupled with about 10 nF to 100 nF close to the VCC/VSS pins. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOP-8 |+| Category | Memory |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `M93S46-WMN6TP`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)+- 3D model files: `m93s46-wmn6tp-etched.step` / `m93s46-wmn6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m93s46-wmn6tp.step` / `m93s46-wmn6tp.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588939307054731264) (32 pp, sha256 `f351bdea984fc360`, retrieved 2026-10-07, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m93s46-wmn6tp-datasheet.pdf)
page.jsonadded+198@@ -0,0 +1,198 @@+{+ "slug": "m93s46-wmn6tp",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "m93s46-wmn6tp",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "m93s46-wmn6tp.kicad_sym",+ "m93s46-wmn6tp.kicad_mod",+ "m93s46-wmn6tp.glb",+ "m93s46-wmn6tp.step",+ "m93s46-wmn6tp.lbr",+ "docs/hero.png",+ "docs/m93s46-wmn6tp-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "m93s46-wmn6tp-hero.glb",+ "m93s46-wmn6tp-hero.overlay.json"+ ],+ "component": {+ "mpn": "M93S46-WMN6TP",+ "manufacturer": "STMicroelectronics",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588939307054731264",+ "parts": {+ "symbol": "m93s46-wmn6tp.kicad_sym",+ "footprint": "m93s46-wmn6tp.kicad_mod",+ "model_3d": "m93s46-wmn6tp-hero.glb",+ "model_3d_plain": "m93s46-wmn6tp.glb",+ "model_3d_step": "m93s46-wmn6tp-etched.step",+ "model_3d_step_plain": "m93s46-wmn6tp.step",+ "lbr": "m93s46-wmn6tp.lbr"+ },+ "distributor_links": {+ "lcsc": "C2060941",+ "digikey": "497-8666-2-ND",+ "mouser": "511-M93S46-WMN6TP"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T03:06:40Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-8666-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "511-M93S46-WMN6TP",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "S",+ "type": "input",+ "description": "Chip select input; low deselects the device and puts Q in high impedance (Standby mode unless a write is in progress), high selects it in Active Power mode."+ },+ {+ "number": "2",+ "name": "C",+ "type": "input",+ "description": "Serial clock input that times the interface, latching D on the rising edge, with a maximum clock frequency of 2 MHz."+ },+ {+ "number": "3",+ "name": "D",+ "type": "input",+ "description": "Serial data input that receives instructions, addresses and data to be written, latched on the rising edge of C."+ },+ {+ "number": "4",+ "name": "Q",+ "type": "tri_state",+ "description": "Serial data output that shifts data out on the rising edge of C, is high impedance when S is low, and gives Ready/Busy status during writes."+ },+ {+ "number": "5",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground, the reference for the VCC supply voltage."+ },+ {+ "number": "6",+ "name": "W",+ "type": "input",+ "description": "Write protect input; when held low writes to memory are disabled, and it must be driven high or low and not left floating."+ },+ {+ "number": "7",+ "name": "PRE",+ "type": "input",+ "description": "Protection register enable input that must be driven high before and during instructions accessing the Protection Register."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage of 2.5 V to 5.5 V, to be decoupled with about 10 nF to 100 nF close to the VCC/VSS pins."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 32,+ "cost_usd": 0.2069,+ "at": "2026-10-07T03:06:27"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588939307054731264",+ "pages": 32,+ "sha256": "f351bdea984fc360",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "m93s46-wmn6tp.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "m93s46-wmn6tp-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "4e306ee2608648b31738bb8bfb3400bb7fe3543e66ab59e5beab4b1f1d60d248",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}