component
M93C56-WMN6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+142−8@@ -1,13 +1,152 @@ {+ "schema_version": 1,+ "type": "component", "slug": "m93c56-wmn6tp",+ "title": "M93C56-WMN6TP",+ "brief": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "m93c56-wmn6tp" ],+ "component": {+ "mpn": "M93C56-WMN6TP",+ "manufacturer": "STMicroelectronics",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://www.st.com/resource/en/datasheet/m93c56-wmn6tp.pdf",+ "parts": {+ "symbol": "m93c56-wmn6tp.kicad_sym",+ "footprint": "m93c56-wmn6tp.kicad_mod",+ "model_3d": "m93c56-wmn6tp.glb",+ "model_3d_step": "m93c56-wmn6tp.step",+ "lbr": "m93c56-wmn6tp.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "S",+ "type": "input",+ "description": "Chip Select input. Active high; enables the MICROWIRE serial interface. Must be pulled low (to VSS) during power-up/power-down and while deselected."+ },+ {+ "number": "2",+ "name": "C",+ "type": "input",+ "description": "Serial Clock input (MICROWIRE clock, up to 2 MHz). Latches data on D on rising edge; shifts data out on Q on rising edge. Should be held low via an external pull-down when the bus master's outputs go high impedance."+ },+ {+ "number": "3",+ "name": "D",+ "type": "input",+ "description": "Serial Data Input. Instructions, addresses, and write data are shifted in on this pin, synchronous with the rising edge of C."+ },+ {+ "number": "4",+ "name": "Q",+ "type": "tri_state",+ "description": "Serial Data Output. Read data is shifted out on this pin synchronous with the rising edge of C. High-impedance when the device is not selected or during internal write cycle; also carries the READY/BUSY status while S is high after a program command."+ },+ {+ "number": "5",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference (0 V) for the device."+ },+ {+ "number": "6",+ "name": "ORG",+ "type": "input",+ "description": "Organization Select input. Tie to VCC (or leave unconnected) for x16 (word) organization; tie to VSS for x8 (byte) organization. To minimize standby current, ORG should be driven to VCC or VSS and not left floating in standby."+ },+ {+ "number": "7",+ "name": "DU",+ "type": "unconnected",+ "description": "Don't Use. Reserved by STMicroelectronics for internal test. May be left unconnected or tied to VCC or VSS; does not affect normal device operation."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage input. 2.5 V to 5.5 V for M93Cx6-W variants (1.8 V to 5.5 V for -R variants). Decouple with 10 nF to 100 nF close to the VCC/VSS pins."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.st.com/resource/en/datasheet/m93c56-wmn6tp.pdf",+ "pages": 35,+ "sha256": "7b1f76e6c602697a",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "STMicroelectronics",+ "Package": "SOIC-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "variants": [+ {+ "mpn": "M93C56-WMN6TP",+ "kind": "packaging"+ },+ {+ "mpn": "M93C56-WMN6TPMN6P",+ "kind": "packaging"+ },+ {+ "mpn": "M93C56-WMN6TPBN6",+ "kind": "packaging"+ },+ {+ "mpn": "M93C56-WMN6TPBN6TP",+ "kind": "packaging"+ },+ {+ "mpn": "M93C56-WMN6TPDW6TP",+ "kind": "packaging"+ },+ {+ "mpn": "M93C56-WMN6TPMC6TP",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "m93c56-wmn6tp"+ ],+ "discovery_pitch": "M93C56-WMN6TP (STMicroelectronics) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +164,5 @@ "docs/m93c56-wmn6tp-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }