component
M24M02-DRMN6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "m24m02-drmn6tp",+ "title": "M24M02-DRMN6TP",+ "brief": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "m24m02-drmn6tp" ],+ "component": {+ "mpn": "M24M02-DRMN6TP",+ "manufacturer": "STMicroelectronics",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://www.st.com/resource/en/datasheet/m24m02-drmn6tp.pdf",+ "parts": {+ "symbol": "m24m02-drmn6tp.kicad_sym",+ "footprint": "m24m02-drmn6tp.kicad_mod",+ "model_3d": "m24m02-drmn6tp.glb",+ "model_3d_step": "m24m02-drmn6tp.step",+ "lbr": "m24m02-drmn6tp.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "DU",+ "type": "unconnected",+ "description": "Do not use. No signal should be applied on this pin; if connected, it must be tied to VSS."+ },+ {+ "number": "2",+ "name": "DU",+ "type": "unconnected",+ "description": "Do not use. No signal should be applied on this pin; if connected, it must be tied to VSS."+ },+ {+ "number": "3",+ "name": "E2",+ "type": "input",+ "description": "Chip Enable address input. Sets the value looked for on bit b3 of the 7-bit I2C device select code. Must be tied to VCC or VSS; if left floating it is read as low (0)."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference for the VCC supply voltage."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial Data I/O for the I2C bus. SDA(out) is an open-drain output that may be wire-OR'ed with other open-drain/open-collector signals on the bus; an external pull-up resistor to VCC is required."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial Clock input for the I2C bus. Strobes data on SDA(in) and clocks data out on SDA(out). Supports 100 kHz, 400 kHz and 1 MHz operation."+ },+ {+ "number": "7",+ "name": "WC",+ "type": "input",+ "description": "Write Control (active-low, /WC). When driven high, all write operations to the memory array are inhibited (device-select and address bytes are still ACK'd, data bytes are not). When driven low or left floating, writes are enabled."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage input. Operating range 1.8 V to 5.5 V over -40 to +85 C. Decouple with a 10 nF to 100 nF capacitor close to the VCC/VSS pins."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.st.com/resource/en/datasheet/m24m02-drmn6tp.pdf",+ "pages": 40,+ "sha256": "1da05aeb020e6185",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "STMicroelectronics",+ "Package": "SOIC-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "m24m02-drmn6tp"+ ],+ "discovery_pitch": "M24M02-DRMN6TP (STMicroelectronics) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/m24m02-drmn6tp-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }