component
M24M01-RMN6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "m24m01-rmn6tp",+ "title": "M24M01-RMN6TP",+ "brief": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "m24m01-rmn6tp" ],+ "component": {+ "mpn": "M24M01-RMN6TP",+ "manufacturer": "STMicroelectronics",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://www.st.com/resource/en/datasheet/m24m01-rmn6tp.pdf",+ "parts": {+ "symbol": "m24m01-rmn6tp.kicad_sym",+ "footprint": "m24m01-rmn6tp.kicad_mod",+ "model_3d": "m24m01-rmn6tp.glb",+ "model_3d_step": "m24m01-rmn6tp.step",+ "lbr": "m24m01-rmn6tp.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "DU",+ "type": "unconnected",+ "description": "Don't Use. No signal should be applied to this pin; if connected, it must be tied to VSS. Reserved by the manufacturer for test/factory use."+ },+ {+ "number": "2",+ "name": "E1",+ "type": "input",+ "description": "Chip Enable input bit 1. Sets bit b2 of the 7-bit I2C device select code. Must be tied to VCC or VSS; when left floating it is read as low (0). Enables up to 4 M24M01 devices on a single I2C bus."+ },+ {+ "number": "3",+ "name": "E2",+ "type": "input",+ "description": "Chip Enable input bit 2. Sets bit b3 of the 7-bit I2C device select code. Must be tied to VCC or VSS; when left floating it is read as low (0)."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference for the VCC supply. Connect to the system 0 V rail with a low-inductance path; place the VCC decoupling capacitor (10 nF-100 nF) close to VCC/VSS pins."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial Data line (I2C). Open-drain input/output used to transfer data in and out of the device; may be wire-OR'ed with other open-drain/open-collector signals. Requires an external pull-up resistor to VCC sized for the bus capacitance."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial Clock input (I2C). Strobes data on SDA (input on rising edge, output changes on falling edge). Supports 100 kHz, 400 kHz, and 1 MHz I2C bus modes. Requires an external pull-up resistor to VCC."+ },+ {+ "number": "7",+ "name": "WC",+ "type": "input",+ "description": "Write Control, active low (WC). When driven high, all write operations to the memory array are inhibited (device-select and address bytes are still ACK'd, but data bytes are not ACK'd). When driven low or left floating, writes are enabled."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage. Operating range 1.7 V to 5.5 V (M24M01-DF grade) or 1.8 V to 5.5 V (M24M01-R grade). Decouple with a 10 nF-100 nF capacitor placed close to the VCC/VSS pins. A power-on-reset (POR) circuit inhibits writes until VCC is valid."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.st.com/resource/en/datasheet/m24m01-rmn6tp.pdf",+ "pages": 41,+ "sha256": "1cc733fc15649559",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "STMicroelectronics",+ "Package": "SOIC-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "m24m01-rmn6tp"+ ],+ "discovery_pitch": "M24M01-RMN6TP (STMicroelectronics) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/m24m01-rmn6tp-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }