M24M01-RMN6TP

@@ -0,0 +1,56 @@+# M24M01-RMN6TP++**STMicroelectronics** · EEPROM · SOIC-8++M24M01-RMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DU | unconnected | Don't Use. No signal should be applied to this pin; if connected, it must be tied to VSS. Reserved by the manufacturer for test/factory use. |+| 2 | E1 | input | Chip Enable input bit 1. Sets bit b2 of the 7-bit I2C device select code. Must be tied to VCC or VSS; when left floating it is read as low (0). Enables up to 4 M24M01 devices on a single I2C bus. |+| 3 | E2 | input | Chip Enable input bit 2. Sets bit b3 of the 7-bit I2C device select code. Must be tied to VCC or VSS; when left floating it is read as low (0). |+| 4 | VSS | power_in | Ground reference for the VCC supply. Connect to the system 0 V rail with a low-inductance path; place the VCC decoupling capacitor (10 nF-100 nF) close to VCC/VSS pins. |+| 5 | SDA | bidirectional | Serial Data line (I2C). Open-drain input/output used to transfer data in and out of the device; may be wire-OR'ed with other open-drain/open-collector signals. Requires an external pull-up resistor to VCC sized for the bus capacitance. |+| 6 | SCL | input | Serial Clock input (I2C). Strobes data on SDA (input on rising edge, output changes on falling edge). Supports 100 kHz, 400 kHz, and 1 MHz I2C bus modes. Requires an external pull-up resistor to VCC. |+| 7 | WC | input | Write Control, active low (WC). When driven high, all write operations to the memory array are inhibited (device-select and address bytes are still ACK'd, but data bytes are not ACK'd). When driven low or left floating, writes are enabled. |+| 8 | VCC | power_in | Supply voltage. Operating range 1.7 V to 5.5 V (M24M01-DF grade) or 1.8 V to 5.5 V (M24M01-R grade). Decouple with a 10 nF-100 nF capacitor placed close to the VCC/VSS pins. A power-on-reset (POR) circuit inhibits writes until VCC is valid. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOIC-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `M24M01-RMN6TPRMN6TP`+- `M24M01-RMN6TPRMN6P`+- `M24M01-RMN6TPDFMN6TP`+- `M24M01-RMN6TPDFMN6P`+- `M24M01-RMN6TPRDW6TP`+- `M24M01-RMN6TPRDW6P`+- `M24M01-RMN6TPDFDW6TP`+- `M24M01-RMN6TPDFDW6P`+- `M24M01-RMN6TPDFCS6TP`+- `M24M01-RMN6TPDFCS6TP/K`++## CAD (KiCad official)++- Symbol: `M24M01-RMN6TP`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/m24m01-rmn6tp.pdf) (41 pp, sha256 `1cc733fc15649559`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m24m01-rmn6tp-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "m24m01-rmn6tp",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "m24m01-rmn6tp"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "m24m01-rmn6tp.kicad_sym",+    "m24m01-rmn6tp.kicad_mod",+    "m24m01-rmn6tp.glb",+    "m24m01-rmn6tp.step",+    "m24m01-rmn6tp.lbr",+    "docs/hero.png",+    "docs/m24m01-rmn6tp-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file