M24C64

@@ -0,0 +1,53 @@+# M24C64++**STMicroelectronics** · 64 Kbit I2C EEPROM · SO-8++A 64 Kbit (8 KB) serial EEPROM with an I2C interface, in SO-8, ST's take on the ubiquitous 24-series EEPROM and a staple for storing settings, calibration, and small logs that survive power loss. It talks I2C at up to 1 MHz, writes in 32-byte pages, and rates over a million write/erase cycles with 200-year retention. Three chip-address pins (E0-E2) put up to eight on one bus, and a write-control pin (WC) hardware-protects the array against stray writes. It shares its pinout and command set with the 24LC64/AT24C64. Runs 1.7-5.5 V.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | E0 | input | Chip enable address input bit 0. Tied to VCC or VSS to set b1 of the 7-bit I2C device select code. Left floating reads as 0. |+| 2 | E1 | input | Chip enable address input bit 1. Tied to VCC or VSS to set b2 of the 7-bit I2C device select code. Left floating reads as 0. |+| 3 | E2 | input | Chip enable address input bit 2. Tied to VCC or VSS to set b3 of the 7-bit I2C device select code. Left floating reads as 0. |+| 4 | VSS | power_in | Ground reference for all signals, including VCC supply voltage. |+| 5 | SDA | bidirectional | I2C serial data. Open-drain bidirectional line for address, data and acknowledge transfers. Requires an external pull-up resistor to VCC. |+| 6 | SCL | input | I2C serial clock input. Strobes data in on SDA and clocks data out on SDA. Supports 100 kHz, 400 kHz, and 1 MHz bus speeds. |+| 7 | WC | input | Write control, active low. When driven high, all write operations to the memory array are disabled (device ACKs the device-select and address bytes but not data bytes). Low or floating enables writes. |+| 8 | VCC | power_in | Supply voltage. 1.7 V to 5.5 V for M24C64-F/DF (down to 1.6 V under restricting conditions), 1.8 V to 5.5 V for M24C64-R, 2.5 V to 5.5 V for M24C64-W. Recommend 10 nF to 100 nF decoupling to VSS close to the pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Type | Serial EEPROM (non-volatile) |+| Density | 64 Kbit (8 KB) |+| Interface | I2C up to 1 MHz |+| Write | 32-byte page |+| Endurance | 1,000,000+ cycles |+| Retention | >200 years |+| Addressing | E0-E2 (8 per bus) + WC protect |+| Supply voltage | 1.7-5.5 V |+| Package | SO-8 |++## Ordering variants++- `M24C64-DFMN6TP (SO-8)`+- `M24C64-RMN6TP (SO-8)`++## CAD (KiCad official)++- Symbol: `M24C64 (generated from datasheet; KiCad has no symbol)`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/m24c64-df.pdf) (50 pp, sha256 `c95123bad692fd89`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m24c64-datasheet.pdf)

@@ -0,0 +1,36 @@+{+  "slug": "m24c64",+  "version": "0.1.0",+  "type": "component",+  "description": "ST 64 Kbit (8 KB) I2C serial EEPROM, SO-8. 1 MHz bus, 3 address pins, write control, 1.7-5.5 V. Datasheet-verified.",+  "tags": [+    "component",+    "memory",+    "eeprom",+    "i2c",+    "non-volatile",+    "so-8",+    "stmicroelectronics"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "m24c64.kicad_sym",+    "m24c64.kicad_mod",+    "m24c64.glb",+    "docs/hero.png",+    "docs/m24c64-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file