← Commit history

Initial commit: component/m24c32-wmn6tp

Ray ·25d53ff54d ·
2 files changed +94
README.mdadded+60
@@ -0,0 +1,60 @@+# M24C32-WMN6TP++**STMicroelectronics** · EEPROM · SOIC-8++M24C32-WMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | E0 | input | Chip Enable address input bit 0. Ties to VCC or VSS to set the LSB (b1) of the 7-bit I²C device select code, allowing up to eight M24C32 devices on the same bus. When left floating, this input is read as low (0). |+| 2 | E1 | input | Chip Enable address input bit 1. Ties to VCC or VSS to set bit b2 of the 7-bit I²C device select code. When left floating, this input is read as low (0). |+| 3 | E2 | input | Chip Enable address input bit 2 (MSB of the chip-enable field). Ties to VCC or VSS to set bit b3 of the 7-bit I²C device select code. When left floating, this input is read as low (0). |+| 4 | VSS | power_in | Ground reference for VCC and all logic signals. Connect to the system ground plane. |+| 5 | SDA | bidirectional | Serial Data - bidirectional, open-drain I²C data line. Transfers address and data bytes in both directions. Requires an external pull-up resistor to VCC (value depends on bus capacitance; see Figure 5). |+| 6 | SCL | input | Serial Clock - I²C clock input driven by the bus master; strobes all data in and out of the device. Supports 400 kHz fast-mode I²C. A pull-up to VCC is only required if a slave stretches the clock; otherwise a push-pull master output is sufficient. |+| 7 | WC | input | Write Control (hardware write-protect). When driven high, write operations to the entire memory array are inhibited (device-select and address bytes are still ACKed, but data bytes are not ACKed). When low or left unconnected (internally read as VIL), writes are enabled. |+| 8 | VCC | power_in | Supply voltage input, 2.5 V to 5.5 V for the M24C32-W variant. Decouple with a 10-100 nF capacitor placed close to the VCC/VSS pins. Device holds a power-on-reset (POR) until VCC crosses the POR threshold. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOIC-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `M24C32-WMN6TP`+- `M24C32-WMN6TPMN3`+- `M24C32-WMN6TPMN3T`+- `M24C32-WMN6TPMN3TP`+- `M24C32-WMN6TPBN6`+- `M24C32-WMN6TPBN3`+- `M24C32-WMN6TPDW6`+- `M24C32-WMN6TPDW6T`+- `M24C32-WMN6TPDW3`+- `M24C32-WMN6TPDW3T`+- `M24C32-WMN6TPMB6`+- `M24C32-WMN6TPMB6T`+- `M24C32-WMN6TPMB3`+- `M24C32-WMN6TPMB3T`++## CAD (KiCad official)++- Symbol: `M24C32-WMN6TP`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/m24c32-wmn6tp.pdf) (None pp, sha256 `184faeb1e405d42a`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m24c32-wmn6tp-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "m24c32-wmn6tp",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "m24c32-wmn6tp"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "m24c32-wmn6tp.kicad_sym",+    "m24c32-wmn6tp.kicad_mod",+    "m24c32-wmn6tp.glb",+    "m24c32-wmn6tp.step",+    "m24c32-wmn6tp.lbr",+    "docs/hero.png",+    "docs/m24c32-wmn6tp-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file