← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# M24C08-WMN6P++**STMicroelectronics** · EEPROM · SO-8++M24C08-WMN6P from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | Not connected. In the SO8/TSSOP8/PDIP8/UFDFPN8 8-lead M24C08, pin 1 is unused (reserved / no internal bond). May be left floating or tied to VSS. |+| 2 | NC | unconnected | Not connected. In the SO8/TSSOP8/PDIP8/UFDFPN8 8-lead M24C08, pin 2 is unused. May be left floating or tied to VSS. |+| 3 | E2 | input | Chip Enable address input. Sets the value of bit b3 of the I2C device select code (1010 E2 A9 A8 R/W), allowing up to two M24C08 devices to share the same I2C bus. Must be tied to VCC or VSS; if left floating it is read as 0. |+| 4 | VSS | power_in | Ground reference for VCC and all logic signals. 0 V. |+| 5 | SDA | bidirectional | I2C Serial Data input/output. Open-drain output - an external pull-up resistor from SDA to VCC is required (typical 1 kΩ-10 kΩ depending on bus capacitance and speed; see Figure 13 for Rbus vs. Cbus at 400 kHz). |+| 6 | SCL | input | I2C Serial Clock input. Strobes data available on SDA(in) and clocks out data on SDA(out). Supports 100 kHz standard-mode and 400 kHz fast-mode I2C. |+| 7 | WC | input | Write Control (write protect). When driven high, the entire memory array is protected: device select and address bytes are acknowledged but data bytes are NoAck'd and no write occurs. Write operations are enabled when WC is driven low or left floating (internal pull-down / read as 0). |+| 8 | VCC | power_in | Positive supply voltage. For the -W variant: 2.5 V to 5.5 V operating range. Decouple to VSS with a 10 nF-100 nF capacitor close to the package. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SO-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `M24C08-WMN6P`+- `M24C08-WMN6PBN`+- `M24C08-WMN6PDW`+- `M24C08-WMN6PMC`+- `M24C08-WMN6PMH`+- `M24C08-WMN6PCT`++## CAD (KiCad official)++- Symbol: `M24C08-WMN6P`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SO-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](docs/m24c08-wmn6p-datasheet.pdf) (None pp, sha256 `a8e7416f57cd63f9`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m24c08-wmn6p-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "m24c08-wmn6p",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics EEPROM, SO-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "m24c08-wmn6p"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "m24c08-wmn6p.kicad_sym",+ "m24c08-wmn6p.kicad_mod",+ "m24c08-wmn6p.glb",+ "m24c08-wmn6p.step",+ "m24c08-wmn6p.lbr",+ "docs/hero.png",+ "docs/m24c08-wmn6p-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}