M24C08-RMN6TP

@@ -0,0 +1,52 @@+# M24C08-RMN6TP++**STMicroelectronics** · EEPROM · SOIC-8++M24C08-RMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | Not connected. Internally unused in the 8-pin SO8/TSSOP8/PDIP8 packages of M24C08. |+| 2 | NC | unconnected | Not connected. Internally unused in the 8-pin SO8/TSSOP8/PDIP8 packages of M24C08. |+| 3 | E2 | input | Chip Enable address input. Sets the value of bit b3 of the device select code (I2C slave address). Must be tied to VCC or VSS to establish the device address; if left floating it is read as 0. Allows up to two M24C08 devices to share the same I2C bus. |+| 4 | VSS | power_in | Ground reference for the VCC supply. |+| 5 | SDA | bidirectional | I2C serial data input/output. SDA(out) is an open-drain output that may be wire-OR'ed with other open-drain signals on the bus. Requires an external pull-up resistor to VCC (see Figure 13 for Rbus sizing versus bus capacitance at 400 kHz). |+| 6 | SCL | input | I2C serial clock input. Strobes data available on SDA (in) and clocks data out on SDA (out). Supports Standard-mode (100 kHz) and Fast-mode (400 kHz) I2C. |+| 7 | WC | input | Write Control (active-low, /WC). When driven high, write operations to the entire memory array are inhibited: device select and address bytes are acknowledged but data bytes are not. Write operations are enabled when /WC is driven low or left floating. |+| 8 | VCC | power_in | Positive supply voltage. For the -R variant (M24C08-RMN6TP) the operating range is 1.8 V to 5.5 V. Decouple with 10 nF to 100 nF close to the VCC/VSS pins. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOIC-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `M24C08-RMN6TPMN`+- `M24C08-RMN6TPDW`+- `M24C08-RMN6TPBN`+- `M24C08-RMN6TPMC`+- `M24C08-RMN6TPMH`+- `M24C08-RMN6TPCT`++## CAD (KiCad official)++- Symbol: `M24C08-RMN6TP`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/m24c08-rmn6tp.pdf) (43 pp, sha256 `a8e7416f57cd63f9`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m24c08-rmn6tp-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "m24c08-rmn6tp",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "m24c08-rmn6tp"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "m24c08-rmn6tp.kicad_sym",+    "m24c08-rmn6tp.kicad_mod",+    "m24c08-rmn6tp.glb",+    "m24c08-rmn6tp.step",+    "m24c08-rmn6tp.lbr",+    "docs/hero.png",+    "docs/m24c08-rmn6tp-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file