← Commit history

m24c02-wmn6p: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·10fc7fe8a1 · ·parent 9f9cbb4
1 file changed +75−1
page.json+75−1
@@ -33,5 +33,79 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "M24C02-WMN6P",+    "manufacturer": "STMicroelectronics",+    "package": "SO-8",+    "pin_count": 8,+    "category": "EEPROM",+    "datasheet": "https://www.st.com/resource/en/datasheet/m24c02-wmn6p.pdf",+    "parts": {+      "symbol": "m24c02-wmn6p.kicad_sym",+      "footprint": "m24c02-wmn6p.kicad_mod",+      "model_3d": "m24c02-wmn6p-etched.glb",+      "model_3d_plain": "m24c02-wmn6p.glb",+      "model_3d_step": "m24c02-wmn6p-etched.step",+      "model_3d_step_plain": "m24c02-wmn6p.step",+      "lbr": "m24c02-wmn6p.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "E0",+        "type": "input",+        "description": "Chip-Enable address bit 0. Tied to VCC or VSS to set the least-significant bit of the 7-bit I2C slave address (device select b1). Read as 0 if left floating."+      },+      {+        "number": "2",+        "name": "E1",+        "type": "input",+        "description": "Chip-Enable address bit 1. Tied to VCC or VSS to set device select bit b2 of the 7-bit I2C slave address. Read as 0 if left floating."+      },+      {+        "number": "3",+        "name": "E2",+        "type": "input",+        "description": "Chip-Enable address bit 2. Tied to VCC or VSS to set device select bit b3 of the 7-bit I2C slave address. Read as 0 if left floating."+      },+      {+        "number": "4",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference for the VCC supply. Connect to system ground."+      },+      {+        "number": "5",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I2C Serial Data. Open-drain bidirectional line used to transfer data in and out of the device; requires an external pull-up resistor to VCC. Compatible with 100 kHz and 400 kHz I2C modes."+      },+      {+        "number": "6",+        "name": "SCL",+        "type": "input",+        "description": "I2C Serial Clock input. Strobes data on SDA (in on rising edge, out shifted while low). Maximum 400 kHz."+      },+      {+        "number": "7",+        "name": "WC",+        "type": "input",+        "description": "Write Control (active-high write protect). When driven high, write operations to the entire memory array are inhibited and data bytes return NoAck; low or floating enables writes."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input. M24C02-W operates from 2.5 V to 5.5 V. Decouple to VSS with a 10-100 nF capacitor close to the pin."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}