component
LTC7003EMSE#TRPBF
Public Made by Adomby adom
Analog Devices Gate Drivers, MSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+7173
README.md+120docs/hero.pngdocs/ltc7003emse-trpbf-datasheet.pdfltc7003emse-trpbf-etched.glbltc7003emse-trpbf-hero.glbltc7003emse-trpbf-hero.overlay.json+449ltc7003emse-trpbf.glbltc7003emse-trpbf.kicad_mod+343ltc7003emse-trpbf.kicad_sym+81ltc7003emse-trpbf.lbr+153ltc7003emse-trpbf.step+5523package.json+248page.json+254viewers/footprint.html+1viewers/symbol.html+1README.mdadded+120@@ -0,0 +1,120 @@+# LTC7003EMSE#TRPBF++**Analog Devices** · Gate Drivers · MSOP-16-EP++LTC7003EMSE#TRPBF from Analog Devices, in a MSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RUN | input | Run control input: a voltage above 1.21V enables normal operation, forcing it below 0.7V shuts the device down to about 1µA quiescent current, and a resistive divider from the input supply can set the undervoltage lockout. |+| 2 | VIN | power_in | Main supply pin, operating from 3.5V to 60V per the electrical characteristics, with a bypass capacitor of at least 0.1µF to GND. |+| 3 | VCC | power_out | Output of the internal LDO that powers the gate drivers and internal circuitry, to be decoupled to GND with at least 1.0µF low-ESR ceramic, and never to be driven to a voltage greater than VIN. |+| 4 | VCCUV | input | VCC undervoltage lockout reference input, where 0.4V to 1.5V on this pin is multiplied by 7 to set the gate drive UVLO, with short to GND giving 3.5V and open giving 7.0V. |+| 5 | FAULT | output | Open-drain fault output that pulls low once the TIMER pin reaches the 1.3V fault threshold, with a typical pull-down impedance of 200Ω and no release until the overcurrent condition and cooldown period expire. |+| 6 | TIMER | passive | Fault timer input where a capacitor CT from this pin to GND sets the fault warning, fault turn-off and retry periods, and a voltage above 3.5V disables the timer function. |+| 7 | INP | input | CMOS-compatible input referenced to GND that sets the state of TGDN and TGUP, with an internal 1MΩ pull-down to GND that holds TGDN at TS during startup transients. |+| 8 | OVLO | input | Overvoltage lockout input where a voltage above 1.21V pulls TGDN to TS and normal operation resumes below 1.11V, and it should be tied to GND when not used. |+| 9 | ISET | input | Current trip threshold set pin where a resistor to GND sets the peak current threshold, with the voltage internally clamped between 0.4V and 1.5V and divided by 20, and leaving it open selects 30mV ΔVTH. |+| 10 | IMON | output | Current monitor output whose voltage equals the sense voltage multiplied by 20 with a range of 0V to 1.5V referenced to GND. |+| 11 | TGDN | output | High current gate driver pull-down that pulls the external MOSFET gate to TS, and should be tied directly to the MOSFET gate for the fastest turn-off. |+| 12 | TGUP | output | High current gate driver pull-up that drives toward BST, and a series resistor to the external MOSFET gate can be used to limit turn-on inrush current. |+| 13 | TS | power_in | Top (high side) source connection of the external MOSFET, or GND in ground-referenced applications, with an absolute range of -6V to 65V. |+| 14 | BST | power_out | High side bootstrapped supply where an external capacitor of at least 0.1µF connects to TS and the voltage swing is 12V to (VIN + 12V). |+| 15 | SNS- | input | Current sense comparator input connected to the sense resistor through a minimum 100Ω resistor, with the sense resistor placed in series with the external MOSFET drain. |+| 16 | SNS+ | input | Current sense comparator input that should use a Kelvin connection to the sense resistor, with the trip threshold ΔVTH clamped between 20mV and 75mV. |+| 17 | GND | power_in | Exposed pad ground that must be soldered to the PCB for rated electrical and thermal performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Analog Devices |+| Package | MSOP-16-EP |+| Category | Motor Driver ICs |+| Pins | 17 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| VIN Input Voltage Operating Range | VIN | 3.5 | | 60 | V | | 4 |+| TS Operating Voltage Range | TS | 0 | | 60 | V | | 4 |+| SNS+/SNS- Input Voltage Range | | 3.5 | | 60 | V | Independent of VIN | 4 |+| Input Threshold Voltage, VINP Rising | VIH | 1.7 | 2 | 2.2 | V | | 5 |+| Input Threshold Voltage, VINP Falling | VIL | 1.3 | 1.6 | 1.8 | V | | 5 |+| RUN and OVLO Pin Threshold Voltage, Rising | | 1.16 | 1.21 | 1.26 | V | | 5 |+| RUN and OVLO Pin Threshold Voltage, Falling | | 1.05 | 1.1 | 1.15 | V | | 5 |+| RUN and OVLO Leakage Current | | -100 | 0 | 100 | nA | VRUN = 1.3V, VOVLO = 1.3V | 5 |+| TIMER Threshold Voltage | VTIMER | 1.25 | 1.3 | 1.35 | V | VTIMER Rising to VFAULT Going Low | 5 |+| TIMER Early Warning Voltage | | 75 | 100 | 125 | mV | VFAULT Going Low to (TG-TS) Going Low | 5 |+| TIMER Pin Fault Pull-Up Current | | -115 | -100 | -80 | µA | VTIMER = 1.0V, ISET = OPEN | 5 |+| TIMER Pin Pull-Down Current | | 2 | 2.5 | 3 | µA | VTIMER = 0.6V, ISET = OPEN, ΔVSNS = 0mV | 5 |+| FAULT Output Low Voltage | | | 0.2 | 0.5 | V | IFAULT = 1mA | 5 |+| FAULT Leakage Current | | -100 | 0 | 100 | nA | VFAULT = 5V | 5 |+| Current Sense Threshold Voltage | ΔVTH | 22 | 30 | 36 | mV | ΔVSNS = (VSNS+, VSNS-), ISET = OPEN | 5 |+| Current Sense Threshold Voltage | ΔVTH | 54 | 60 | 64 | mV | ΔVSNS = (VSNS+, VSNS-), VISET = 1.2V | 5 |+| Current Sense Threshold Voltage | ΔVTH | 15 | 20 | 24 | mV | ΔVSNS = (VSNS+, VSNS-), VISET = 0V | 5 |+| Retry Duty Cycle | D | | 0.06 | 0.1 | % | ΔVSNS = 200mV, CTIMER = 1nF | 5 |+| ISET and VCCUV Pull-Up Current | | -11.3 | -10 | -8.7 | µA | VISET = 1.0V, VVCCUV = 1.0V | 5 |+| IMON Output Voltage | | 1.12 | 1.2 | 1.28 | V | ΔVSNS = 60mV, VTIMER = 0V, VINP = 3.5V | 5 |+| IMON Output Voltage | | 0.52 | 0.6 | 0.68 | V | ΔVSNS = 30mV, VTIMER = 0V, VINP = 3.5V | 5 |+| Input to Output Propagation Delay, Rising | tPLH | | 35 | 70 | ns | VINP Rising, CL = 1nF | 4 |+| Input to Output Propagation Delay, Falling | tPHL | | 35 | 70 | ns | VINP Falling, CL = 1nF | 4 |+| TG Pull-Up Resistance | | | 2.2 | 7 | Ω | VIN = VBST = 12V | 4 |+| TG Pull-Down Resistance | | | 1 | 4 | Ω | VIN = VBST = 12V | 4 |+| Charge Pump Output Current | | | -15 | -30 | µA | VTS = 20V, VBST-TS = 10V | 4 |+| SNS- Current | | 2 | 4 | 6.5 | µA | VINP = 4V, VRUN = 2V | 4 |+| VIN Supply Voltage | VIN | -0.3 | | 65 | V | | 3 |+| BST-TS Voltage | BST-TS | -0.3 | | 15 | V | | 3 |+| VCC Voltage | VCC | -0.3 | | 15 | V | | 3 |+| BST Voltage | BST | -0.3 | | 80 | V | | 3 |+| TS Voltage | TS | -6 | | 65 | V | | 3 |+| RUN, SNS+ and SNS- Voltages | | -0.3 | | 65 | V | | 3 |+| SNS+, SNS- Differential Voltage | ΔVSNS | -0.3 | | 0.3 | V | Continuous | 3 |+| SNS+, SNS- Differential Current | | -100 | | 100 | mA | <1msec | 3 |+| INP Voltage | INP | -6 | | 15 | V | | 3 |+| TIMER, FAULT Voltages | | -0.3 | | 15 | V | | 3 |+| VCCUV, ISET, IMON, OVLO Voltages | | -0.3 | | 6 | V | | 3 |+| Operating Junction Temperature Range (LTC7003E) | TJ | -40 | | 125 | °C | LTC7003E | 3 |+| Storage Temperature Range | | -65 | | 150 | °C | | 3 |+| Maximum Junction Temperature | TJMAX | | | 150 | °C | | 3 |+| VCC LDO Output Voltage | VCC | | 10 | | V | CVCC = 1µF, VIN = 12V | 4 |+| VCC LDO Dropout Voltage (VIN-VCC) | VIN-VCC | | 0.2 | | V | VIN = 6V, IVCC = -1mA | 4 |+| VIN DC Supply Current, Charge Pump Overdriven, ON Mode | | | 35 | | µA | CVCC = 1µF, VBST-TS = 13V, VINP = 4V, VRUN = 2V | 4 |+| VIN DC Supply Current, Charge Pump Overdriven, Sleep Mode | | | 25 | | µA | CVCC = 1µF, VBST-TS = 13V, VINP = 0.4V, VRUN = 2V | 4 |+| VIN DC Supply Current, Charge Pump Overdriven, Shutdown Mode | | | 1 | | µA | CVCC = 1µF, VBST-TS = 13V, VRUN = 0V | 4 |+| SNS+ Current | | | 21 | | µA | VINP = 4V, VRUN = 2V | 4 |+| SNS+ Current | | | 12 | | µA | VINP = 0.4V, VRUN = 2V | 4 |+| Input Threshold Hysteresis | | | 400 | | mV | | 5 |+| Input Pull-Down Resistance | | | 1 | | MΩ | VINP = 1V | 5 |+| RUN and OVLO Pin Threshold Hysteresis | | | 110 | | mV | | 5 |+| Over-Current to TG Low Propagation Delay | | | 70 | | ns | ΔVSNS Step 10mV to 50mV, ISET = OPEN, VTIMER = VCC, VINP = 3.5V | 5 |+| Output Rise Time | tr | | 13 | | ns | 10% to 90%, CL = 1nF | 4 |+| Output Rise Time | tr | | 90 | | ns | 10% to 90%, CL = 10nF | 4 |+| Output Fall Time | tf | | 13 | | ns | 10% to 90%, CL = 1nF | 4 |+| Output Fall Time | tf | | 40 | | ns | 10% to 90%, CL = 10nF | 4 |+| BST-TS Floating UVLO Rising | | | 3.1 | | V | | 4 |+| BST-TS Floating UVLO Falling | | | 2.8 | | V | | 4 |+| Thermal Resistance, Junction to Ambient | θJA | | 45 | | °C/W | | 3 |+| Thermal Resistance, Junction to Case | θJC | | 10 | | °C/W | | 3 |++## CAD (KiCad official)++- Symbol: `LTC7003EMSE#TRPBF`+- Footprint: `Package_SO:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm`+- 3D model: MSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `ltc7003emse-trpbf-etched.step` / `ltc7003emse-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc7003emse-trpbf.step` / `ltc7003emse-trpbf.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908411639500800) (26 pp, sha256 `36f4c47ec9a56f55`, retrieved 2026-10-20, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ltc7003emse-trpbf-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/ltc7003emse-trpbf-datasheet.pdfadded⋯ 1 unchanged line ⋯
ltc7003emse-trpbf-etched.glbadded⋯ 1 unchanged line ⋯
ltc7003emse-trpbf-hero.glbadded⋯ 1 unchanged line ⋯
ltc7003emse-trpbf-hero.overlay.jsonadded+449@@ -0,0 +1,449 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LTC7003EMSE#TRPBF",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 17,+ "span_mm": 6.345,+ "dash_mm": 0.1586,+ "gap_mm": 0.0952,+ "pad_stroke_mm": 0.0381+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 16,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.46,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -2.45,+ 2.45,+ -1.86,+ 1.86+ ],+ "pads_bbox_mm": [+ -2.875,+ 2.875,+ -1.9,+ 1.9+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "ltc7003emse-trpbf-etched.glb",+ "glb_sha256": "3aa2bf0dbd4ffc74fd82bcbcd50619cae7e55dd33a456016d66b26fd5579ebc2",+ "footprint": "ltc7003emse-trpbf.kicad_mod",+ "footprint_sha256": "43988b46e4d3ebb04813675a613919c4a7abff89485b7d5badd1d90e98000a32",+ "pins": "page.json component.pins",+ "pins_sha256": "860eb474109587ce145de97a7a8b5005ce4eca4185ae1ee413b54f34face52cc"+ },+ "generator": "adom-wiki 1.7.76 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "RUN",+ "x": -3.57,+ "y": -1.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "2",+ "text": "VIN",+ "x": -2.975,+ "y": -1.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "3",+ "text": "VCC",+ "x": -2.975,+ "y": -0.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "4",+ "text": "VCCUV",+ "x": -2.975,+ "y": -0.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "5",+ "text": "FAULT",+ "x": -2.975,+ "y": 0.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "6",+ "text": "TIMER",+ "x": -2.975,+ "y": 0.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "7",+ "text": "INP",+ "x": -2.975,+ "y": 1.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "8",+ "text": "OVLO",+ "x": -2.975,+ "y": 1.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "9",+ "text": "ISET",+ "x": 2.975,+ "y": 1.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "10",+ "text": "IMON",+ "x": 2.975,+ "y": 1.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "11",+ "text": "TGDN",+ "x": 2.975,+ "y": 0.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "12",+ "text": "TGUP",+ "x": 2.975,+ "y": 0.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "13",+ "text": "TS",+ "x": 2.975,+ "y": -0.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "14",+ "text": "BST",+ "x": 2.975,+ "y": -0.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "15",+ "text": "SNS–",+ "x": 2.975,+ "y": -1.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "16",+ "text": "SNS+",+ "x": 2.975,+ "y": -1.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ -1.75+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ -1.25+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ -0.75+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ -0.25+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ 0.25+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ 0.75+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ 1.25+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ 1.75+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ 1.75+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ 1.25+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ 0.75+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ 0.25+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ -0.25+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ -0.75+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ -1.25+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ -1.75+ ],+ "size_mm": [+ 1.45,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 1.651,+ 2.845+ ],+ "rot": 0.0+ }+ ]+}
ltc7003emse-trpbf.glbadded⋯ 1 unchanged line ⋯
ltc7003emse-trpbf.kicad_modadded+343@@ -0,0 +1,343 @@+(footprint "MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "MSOP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081667_F_MSE16.pdf)")+ (tags "MSOP SO")+ (property "Reference" "REF**"+ (at 0 -2.97 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm"+ (at 0 2.97 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/gullwing"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -1.61 -2.16)+ (end 1.61 -2.16)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 1.61 2.16)+ (end -1.61 2.16)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -3.14 -1.75)+ (xy -3.47 -1.51)+ (xy -3.47 -1.99)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_line+ (start -3.13 -2.15)+ (end -1.75 -2.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -3.13 2.15)+ (end -3.13 -2.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.75 -2.27)+ (end 1.75 -2.27)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.75 -2.15)+ (end -1.75 -2.27)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.75 2.15)+ (end -3.13 2.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.75 2.27)+ (end -1.75 2.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 1.75 -2.27)+ (end 1.75 -2.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 1.75 -2.15)+ (end 3.13 -2.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 1.75 2.15)+ (end 1.75 2.27)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 1.75 2.27)+ (end -1.75 2.27)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.13 -2.15)+ (end 3.13 2.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.13 2.15)+ (end 1.75 2.15)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_poly+ (pts+ (xy -0.75 -2.0195)+ (xy 1.5 -2.0195)+ (xy 1.5 2.0195)+ (xy -1.5 2.0195)+ (xy -1.5 -1.2695)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 90)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "" smd roundrect+ (at -0.415 -0.71)+ (size 0.69 1.19)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at -0.415 0.71)+ (size 0.69 1.19)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at 0.415 -0.71)+ (size 0.69 1.19)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at 0.415 0.71)+ (size 0.69 1.19)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "1" smd roundrect+ (at -2.15 -1.75)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "2" smd roundrect+ (at -2.15 -1.25)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "3" smd roundrect+ (at -2.15 -0.75)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "4" smd roundrect+ (at -2.15 -0.25)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "5" smd roundrect+ (at -2.15 0.25)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "6" smd roundrect+ (at -2.15 0.75)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "7" smd roundrect+ (at -2.15 1.25)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "8" smd roundrect+ (at -2.15 1.75)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "9" smd roundrect+ (at 2.15 1.75)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "10" smd roundrect+ (at 2.15 1.25)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "11" smd roundrect+ (at 2.15 0.75)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "12" smd roundrect+ (at 2.15 0.25)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "13" smd roundrect+ (at 2.15 -0.25)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "14" smd roundrect+ (at 2.15 -0.75)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "15" smd roundrect+ (at 2.15 -1.25)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "16" smd roundrect+ (at 2.15 -1.75)+ (size 1.45 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "17" smd rect+ (at 0 0)+ (size 1.651 2.845)+ (property pad_prop_heatsink)+ (layers "F.Cu" "F.Mask")+ (zone_connect 2)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
ltc7003emse-trpbf.kicad_symadded+81@@ -0,0 +1,81 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "LTC7003EMSE#TRPBF" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 15.24 0) (effects (font (size 1.27 1.27))))+ (property "Value" "LTC7003EMSE#TRPBF" (at 0 -15.24 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "LTC7003EMSE#TRPBF_0_1"+ (rectangle (start -12.70 12.70) (end 12.70 -12.70)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "LTC7003EMSE#TRPBF_1_1"+ (pin input line (at -17.78 10.16 0) (length 5.08)+ (name "RUN" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 7.62 0) (length 5.08)+ (name "VIN" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin power_out line (at -17.78 5.08 0) (length 5.08)+ (name "VCC" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 2.54 0) (length 5.08)+ (name "VCCUV" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 0.00 0) (length 5.08)+ (name "FAULT" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at -17.78 -2.54 0) (length 5.08)+ (name "TIMER" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -5.08 0) (length 5.08)+ (name "INP" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -7.62 0) (length 5.08)+ (name "OVLO" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -10.16 0) (length 5.08)+ (name "ISET" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 7.62 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "17" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 5.08 180) (length 5.08)+ (name "SNS+" (effects (font (size 1.27 1.27))))+ (number "16" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 2.54 180) (length 5.08)+ (name "SNS–" (effects (font (size 1.27 1.27))))+ (number "15" (effects (font (size 1.27 1.27))))+ )+ (pin power_out line (at 17.78 0.00 180) (length 5.08)+ (name "BST" (effects (font (size 1.27 1.27))))+ (number "14" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -2.54 180) (length 5.08)+ (name "TS" (effects (font (size 1.27 1.27))))+ (number "13" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -5.08 180) (length 5.08)+ (name "TGUP" (effects (font (size 1.27 1.27))))+ (number "12" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -7.62 180) (length 5.08)+ (name "TGDN" (effects (font (size 1.27 1.27))))+ (number "11" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -10.16 180) (length 5.08)+ (name "IMON" (effects (font (size 1.27 1.27))))+ (number "10" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
ltc7003emse-trpbf.lbradded+153@@ -0,0 +1,153 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm">+ <description>MSOP-16-1EP, 3 x 4.039 mm, 0.5 mm pitch</description>+ <smd name="1" x="-2.1500" y="1.7500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="2" x="-2.1500" y="1.2500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="3" x="-2.1500" y="0.7500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="4" x="-2.1500" y="0.2500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="5" x="-2.1500" y="-0.2500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="6" x="-2.1500" y="-0.7500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="7" x="-2.1500" y="-1.2500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="8" x="-2.1500" y="-1.7500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="9" x="2.1500" y="-1.7500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="10" x="2.1500" y="-1.2500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="11" x="2.1500" y="-0.7500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="12" x="2.1500" y="-0.2500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="13" x="2.1500" y="0.2500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="14" x="2.1500" y="0.7500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="15" x="2.1500" y="1.2500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="16" x="2.1500" y="1.7500" dx="1.4500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="17" x="0.0000" y="-0.0000" dx="1.6510" dy="2.8450" layer="1" cream="no"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-3.1400" y="1.7500"/>+ <vertex x="-3.4700" y="1.5100"/>+ <vertex x="-3.4700" y="1.9900"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.7500" y="2.0195"/>+ <vertex x="1.5000" y="2.0195"/>+ <vertex x="1.5000" y="-2.0195"/>+ <vertex x="-1.5000" y="-2.0195"/>+ <vertex x="-1.5000" y="1.2695"/>+ </polygon>+ <wire x1="-1.6100" y1="2.1600" x2="1.6100" y2="2.1600" width="0.1200" layer="21"/>+ <wire x1="1.6100" y1="-2.1600" x2="-1.6100" y2="-2.1600" width="0.1200" layer="21"/>+ <text x="0" y="3.075" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-3.075" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="LTC7003EMSE#TRPBF">+ <wire x1="-12.7" y1="12.7" x2="12.7" y2="12.7" width="0.254" layer="94"/>+ <wire x1="12.7" y1="12.7" x2="12.7" y2="-12.7" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-12.7" x2="-12.7" y2="-12.7" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-12.7" x2="-12.7" y2="12.7" width="0.254" layer="94"/>+ <text x="0.0000" y="15.2400" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-15.2400" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="RUN" x="-17.78" y="10.16" length="middle" direction="in"/>+ <pin name="VIN" x="-17.78" y="7.62" length="middle" direction="pwr"/>+ <pin name="VCC" x="-17.78" y="5.08" length="middle" direction="out"/>+ <pin name="VCCUV" x="-17.78" y="2.54" length="middle" direction="in"/>+ <pin name="FAULT" x="-17.78" y="0" length="middle" direction="out"/>+ <pin name="TIMER" x="-17.78" y="-2.54" length="middle" direction="pas"/>+ <pin name="INP" x="-17.78" y="-5.08" length="middle" direction="in"/>+ <pin name="OVLO" x="-17.78" y="-7.62" length="middle" direction="in"/>+ <pin name="ISET" x="-17.78" y="-10.16" length="middle" direction="in"/>+ <pin name="GND" x="17.78" y="7.62" length="middle" direction="pwr" rot="R180"/>+ <pin name="SNS+" x="17.78" y="5.08" length="middle" direction="in" rot="R180"/>+ <pin name="SNS" x="17.78" y="2.54" length="middle" direction="in" rot="R180"/>+ <pin name="BST" x="17.78" y="0" length="middle" direction="out" rot="R180"/>+ <pin name="TS" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>+ <pin name="TGUP" x="17.78" y="-5.08" length="middle" direction="out" rot="R180"/>+ <pin name="TGDN" x="17.78" y="-7.62" length="middle" direction="out" rot="R180"/>+ <pin name="IMON" x="17.78" y="-10.16" length="middle" direction="out" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="LTC7003EMSE#TRPBF" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="LTC7003EMSE#TRPBF" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm">+ <connects>+ <connect gate="G$1" pin="RUN" pad="1"/>+ <connect gate="G$1" pin="VIN" pad="2"/>+ <connect gate="G$1" pin="VCC" pad="3"/>+ <connect gate="G$1" pin="VCCUV" pad="4"/>+ <connect gate="G$1" pin="FAULT" pad="5"/>+ <connect gate="G$1" pin="TIMER" pad="6"/>+ <connect gate="G$1" pin="INP" pad="7"/>+ <connect gate="G$1" pin="OVLO" pad="8"/>+ <connect gate="G$1" pin="ISET" pad="9"/>+ <connect gate="G$1" pin="GND" pad="17"/>+ <connect gate="G$1" pin="SNS+" pad="16"/>+ <connect gate="G$1" pin="SNS" pad="15"/>+ <connect gate="G$1" pin="BST" pad="14"/>+ <connect gate="G$1" pin="TS" pad="13"/>+ <connect gate="G$1" pin="TGUP" pad="12"/>+ <connect gate="G$1" pin="TGDN" pad="11"/>+ <connect gate="G$1" pin="IMON" pad="10"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
ltc7003emse-trpbf.stepadded+5523@@ -0,0 +1,5523 @@+ISO-10303-21;+HEADER;+/* MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm','MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design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ontext #1','3D Context with UNIT and UNCERTAINTY') );+#5175=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#5176=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#5177=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#5178=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#5175,'distance_accuracy_value','confusion accuracy');+#5179=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#5180=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#5181,#5191,#5192,#5193,#5194,#5195,#5196,#5197,#5198,#5199,#5200,#5209,#5210,#5211,#5212,#5213,#5214,#5215,#5216,#5217,#5218,#5219,#5220,#5221,#5222,#5223,#5224,#5225,#5226,#5227,#5228,#5229,#5230,#5231,#5232,#5233,#5234,#5235,#5236,#5237,#5238,#5239,#5240,#5241,#5242,#5243,#5244,#5245,#5246,#5247,#5248,#5249,#5250,#5251,#5252,#5253,#5254,#5255,#5256,#5257,#5258,#5259,#5260,#5261,#5262,#5263,#5264,#5265,#5266,#5267,#5268,#5269,#5270,#5271,#5272,#5273,#5274,#5275,#5276,#5277,#5278,#5279,#5280,#5281,#5282,#5283,#5284,#5285,#5286,#5287,#5288,#5289,#5290,#5291,#5292,#5293,#5294,#5295,#5296,#5297,#5298,#5299,#5300,#5301,#5302,#5303,#5304,#5305,#5306,#5307,#5308,#5309,#5310,#5311,#5312,#5313,#5314,#5315,#5316,#5317,#5318,#5319,#5320,#5321,#5322,#5323,#5324,#5325,#5326,#5327,#5328,#5329,#5330,#5331,#5332,#5333,#5334,#5335,#5336,#5337,#5338,#5339,#5340,#5341,#5342,#5343,#5344,#5345,#5346,#5347,#5348,#5349,#5350,#5351,#5352,#5353,#5354,#5355,#5356,#5357,#5358,#5359,#5360,#5361,#5362,#5363,#5364,#5365,#5366,#5367,#5368,#5369,#5370,#5371,#5372,#5373,#5374,#5375,#5376,#5377,#5378,#5379,#5380,#5381,#5382,#5383,#5384,#5385,#5386,#5387,#5388,#5389,#5390,#5391,#5392,#5393,#5394,#5395,#5396,#5397,#5398,#5399,#5400,#5401,#5402,#5403,#5404,#5405,#5406,#5407,#5408,#5409,#5410,#5411,#5412,#5413,#5414,#5415,#5416,#5417,#5418,#5419,#5420,#5421,#5422,#5423,#5424,#5425,#5426,#5427,#5428,#5429,#5430,#5431,#5432,#5433,#5434,#5435,#5436,#5437,#5438,#5439,#5440,#5441,#5442,#5443,#5444,#5445,#5446,#5447,#5448,#5449,#5450,#5451,#5452,#5453,#5454,#5455,#5456,#5457,#5458,#5459,#5460,#5461,#5462,#5463,#5464,#5465,#5466,#5467,#5468,#5469),#5174);+#5181=STYLED_ITEM('color',(#5182),#17);+#5182=PRESENTATION_STYLE_ASSIGNMENT((#5183,#5189));+#5183=SURFACE_STYLE_USAGE(.BOTH.,#5184);+#5184=SURFACE_SIDE_STYLE('',(#5185));+#5185=SURFACE_STYLE_FILL_AREA(#5186);+#5186=FILL_AREA_STYLE('',(#5187));+#5187=FILL_AREA_STYLE_COLOUR('',#5188);+#5188=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#5189=CURVE_STYLE('',#5190,POSITIVE_LENGTH_MEASURE(0.1),#5188);+#5190=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#5191=STYLED_ITEM('color',(#5182),#43);+#5192=STYLED_ITEM('color',(#5182),#119);+#5193=STYLED_ITEM('color',(#5182),#133);+#5194=STYLED_ITEM('color',(#5182),#152);+#5195=STYLED_ITEM('color',(#5182),#166);+#5196=STYLED_ITEM('color',(#5182),#244);+#5197=STYLED_ITEM('color',(#5182),#322);+#5198=STYLED_ITEM('color',(#5182),#336);+#5199=STYLED_ITEM('color',(#5182),#350);+#5200=STYLED_ITEM('color',(#5201),#360);+#5201=PRESENTATION_STYLE_ASSIGNMENT((#5202,#5208));+#5202=SURFACE_STYLE_USAGE(.BOTH.,#5203);+#5203=SURFACE_SIDE_STYLE('',(#5204));+#5204=SURFACE_STYLE_FILL_AREA(#5205);+#5205=FILL_AREA_STYLE('',(#5206));+#5206=FILL_AREA_STYLE_COLOUR('',#5207);+#5207=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#5208=CURVE_STYLE('',#5190,POSITIVE_LENGTH_MEASURE(0.1),#5207);+#5209=STYLED_ITEM('color',(#5201),#380);+#5210=STYLED_ITEM('color',(#5201),#395);+#5211=STYLED_ITEM('color',(#5201),#408);+#5212=STYLED_ITEM('color',(#5182),#417);+#5213=STYLED_ITEM('color',(#5182),#432);+#5214=STYLED_ITEM('color',(#5182),#496);+#5215=STYLED_ITEM('color',(#5182),#507);+#5216=STYLED_ITEM('color',(#5201),#525);+#5217=STYLED_ITEM('color',(#5182),#550);+#5218=STYLED_ITEM('color',(#5201),#568);+#5219=STYLED_ITEM('color',(#5182),#589);+#5220=STYLED_ITEM('color',(#5201),#607);+#5221=STYLED_ITEM('color',(#5182),#628);+#5222=STYLED_ITEM('color',(#5201),#646);+#5223=STYLED_ITEM('color',(#5182),#667);+#5224=STYLED_ITEM('color',(#5201),#685);+#5225=STYLED_ITEM('color',(#5182),#706);+#5226=STYLED_ITEM('color',(#5201),#724);+#5227=STYLED_ITEM('color',(#5182),#745);+#5228=STYLED_ITEM('color',(#5201),#763);+#5229=STYLED_ITEM('color',(#5182),#784);+#5230=STYLED_ITEM('color',(#5201),#802);+#5231=STYLED_ITEM('color',(#5182),#823);+#5232=STYLED_ITEM('color',(#5182),#833);+#5233=STYLED_ITEM('color',(#5201),#845);+#5234=STYLED_ITEM('color',(#5182),#866);+#5235=STYLED_ITEM('color',(#5201),#884);+#5236=STYLED_ITEM('color',(#5182),#905);+#5237=STYLED_ITEM('color',(#5201),#923);+#5238=STYLED_ITEM('color',(#5182),#944);+#5239=STYLED_ITEM('color',(#5201),#962);+#5240=STYLED_ITEM('color',(#5182),#983);+#5241=STYLED_ITEM('color',(#5201),#1001);+#5242=STYLED_ITEM('color',(#5182),#1022);+#5243=STYLED_ITEM('color',(#5201),#1040);+#5244=STYLED_ITEM('color',(#5182),#1061);+#5245=STYLED_ITEM('color',(#5201),#1079);+#5246=STYLED_ITEM('color',(#5182),#1100);+#5247=STYLED_ITEM('color',(#5201),#1118);+#5248=STYLED_ITEM('color',(#5182),#1139);+#5249=STYLED_ITEM('color',(#5182),#1156);+#5250=STYLED_ITEM('color',(#5182),#1171);+#5251=STYLED_ITEM('color',(#5182),#1186);+#5252=STYLED_ITEM('color',(#5201),#1197);+#5253=STYLED_ITEM('color',(#5201),#1204);+#5254=STYLED_ITEM('color',(#5182),#1228);+#5255=STYLED_ITEM('color',(#5182),#1306);+#5256=STYLED_ITEM('color',(#5182),#1320);+#5257=STYLED_ITEM('color',(#5182),#1334);+#5258=STYLED_ITEM('color',(#5182),#1348);+#5259=STYLED_ITEM('color',(#5201),#1426);+#5260=STYLED_ITEM('color',(#5182),#1446);+#5261=STYLED_ITEM('color',(#5201),#1477);+#5262=STYLED_ITEM('color',(#5201),#1548);+#5263=STYLED_ITEM('color',(#5201),#1566);+#5264=STYLED_ITEM('color',(#5182),#1619);+#5265=STYLED_ITEM('color',(#5201),#1630);+#5266=STYLED_ITEM('color',(#5201),#1690);+#5267=STYLED_ITEM('color',(#5201),#1707);+#5268=STYLED_ITEM('color',(#5182),#1760);+#5269=STYLED_ITEM('color',(#5201),#1771);+#5270=STYLED_ITEM('color',(#5201),#1831);+#5271=STYLED_ITEM('color',(#5201),#1848);+#5272=STYLED_ITEM('color',(#5182),#1901);+#5273=STYLED_ITEM('color',(#5201),#1912);+#5274=STYLED_ITEM('color',(#5201),#1972);+#5275=STYLED_ITEM('color',(#5201),#1989);+#5276=STYLED_ITEM('color',(#5182),#2042);+#5277=STYLED_ITEM('color',(#5201),#2053);+#5278=STYLED_ITEM('color',(#5201),#2113);+#5279=STYLED_ITEM('color',(#5201),#2130);+#5280=STYLED_ITEM('color',(#5182),#2183);+#5281=STYLED_ITEM('color',(#5201),#2194);+#5282=STYLED_ITEM('color',(#5201),#2254);+#5283=STYLED_ITEM('color',(#5201),#2271);+#5284=STYLED_ITEM('color',(#5182),#2324);+#5285=STYLED_ITEM('color',(#5201),#2335);+#5286=STYLED_ITEM('color',(#5201),#2395);+#5287=STYLED_ITEM('color',(#5201),#2412);+#5288=STYLED_ITEM('color',(#5182),#2465);+#5289=STYLED_ITEM('color',(#5201),#2473);+#5290=STYLED_ITEM('color',(#5201),#2531);+#5291=STYLED_ITEM('color',(#5201),#2548);+#5292=STYLED_ITEM('color',(#5201),#2596);+#5293=STYLED_ITEM('color',(#5201),#2661);+#5294=STYLED_ITEM('color',(#5201),#2677);+#5295=STYLED_ITEM('color',(#5182),#2725);+#5296=STYLED_ITEM('color',(#5201),#2735);+#5297=STYLED_ITEM('color',(#5201),#2795);+#5298=STYLED_ITEM('color',(#5201),#2811);+#5299=STYLED_ITEM('color',(#5182),#2864);+#5300=STYLED_ITEM('color',(#5201),#2875);+#5301=STYLED_ITEM('color',(#5201),#2935);+#5302=STYLED_ITEM('color',(#5201),#2951);+#5303=STYLED_ITEM('color',(#5182),#3004);+#5304=STYLED_ITEM('color',(#5201),#3015);+#5305=STYLED_ITEM('color',(#5201),#3075);+#5306=STYLED_ITEM('color',(#5201),#3091);+#5307=STYLED_ITEM('color',(#5182),#3144);+#5308=STYLED_ITEM('color',(#5201),#3155);+#5309=STYLED_ITEM('color',(#5201),#3215);+#5310=STYLED_ITEM('color',(#5201),#3231);+#5311=STYLED_ITEM('color',(#5182),#3284);+#5312=STYLED_ITEM('color',(#5201),#3295);+#5313=STYLED_ITEM('color',(#5201),#3355);+#5314=STYLED_ITEM('color',(#5201),#3371);+#5315=STYLED_ITEM('color',(#5182),#3424);+#5316=STYLED_ITEM('color',(#5201),#3435);+#5317=STYLED_ITEM('color',(#5201),#3495);+#5318=STYLED_ITEM('color',(#5201),#3511);+#5319=STYLED_ITEM('color',(#5182),#3564);+#5320=STYLED_ITEM('color',(#5201),#3575);+#5321=STYLED_ITEM('color',(#5201),#3635);+#5322=STYLED_ITEM('color',(#5201),#3651);+#5323=STYLED_ITEM('color',(#5201),#3702);+#5324=STYLED_ITEM('color',(#5201),#3712);+#5325=STYLED_ITEM('color',(#5201),#3724);+#5326=STYLED_ITEM('color',(#5201),#3736);+#5327=STYLED_ITEM('color',(#5201),#3748);+#5328=STYLED_ITEM('color',(#5201),#3760);+#5329=STYLED_ITEM('color',(#5201),#3772);+#5330=STYLED_ITEM('color',(#5201),#3784);+#5331=STYLED_ITEM('color',(#5182),#3796);+#5332=STYLED_ITEM('color',(#5182),#3825);+#5333=STYLED_ITEM('color',(#5201),#3834);+#5334=STYLED_ITEM('color',(#5201),#3846);+#5335=STYLED_ITEM('color',(#5201),#3858);+#5336=STYLED_ITEM('color',(#5201),#3870);+#5337=STYLED_ITEM('color',(#5201),#3882);+#5338=STYLED_ITEM('color',(#5201),#3894);+#5339=STYLED_ITEM('color',(#5201),#3906);+#5340=STYLED_ITEM('color',(#5182),#3918);+#5341=STYLED_ITEM('color',(#5201),#3927);+#5342=STYLED_ITEM('color',(#5182),#3937);+#5343=STYLED_ITEM('color',(#5201),#3944);+#5344=STYLED_ITEM('color',(#5201),#3954);+#5345=STYLED_ITEM('color',(#5201),#3965);+#5346=STYLED_ITEM('color',(#5201),#3975);+#5347=STYLED_ITEM('color',(#5201),#3985);+#5348=STYLED_ITEM('color',(#5201),#3995);+#5349=STYLED_ITEM('color',(#5201),#4005);+#5350=STYLED_ITEM('color',(#5201),#4015);+#5351=STYLED_ITEM('color',(#5201),#4024);+#5352=STYLED_ITEM('color',(#5201),#4034);+#5353=STYLED_ITEM('color',(#5201),#4044);+#5354=STYLED_ITEM('color',(#5201),#4054);+#5355=STYLED_ITEM('color',(#5201),#4064);+#5356=STYLED_ITEM('color',(#5201),#4074);+#5357=STYLED_ITEM('color',(#5201),#4084);+#5358=STYLED_ITEM('color',(#5201),#4094);+#5359=STYLED_ITEM('color',(#5201),#4102);+#5360=STYLED_ITEM('color',(#5201),#4112);+#5361=STYLED_ITEM('color',(#5201),#4122);+#5362=STYLED_ITEM('color',(#5201),#4132);+#5363=STYLED_ITEM('color',(#5201),#4142);+#5364=STYLED_ITEM('color',(#5201),#4152);+#5365=STYLED_ITEM('color',(#5201),#4162);+#5366=STYLED_ITEM('color',(#5201),#4172);+#5367=STYLED_ITEM('color',(#5201),#4180);+#5368=STYLED_ITEM('color',(#5201),#4190);+#5369=STYLED_ITEM('color',(#5201),#4200);+#5370=STYLED_ITEM('color',(#5201),#4210);+#5371=STYLED_ITEM('color',(#5201),#4220);+#5372=STYLED_ITEM('color',(#5201),#4230);+#5373=STYLED_ITEM('color',(#5201),#4240);+#5374=STYLED_ITEM('color',(#5201),#4250);+#5375=STYLED_ITEM('color',(#5201),#4258);+#5376=STYLED_ITEM('color',(#5201),#4268);+#5377=STYLED_ITEM('color',(#5201),#4278);+#5378=STYLED_ITEM('color',(#5201),#4288);+#5379=STYLED_ITEM('color',(#5201),#4298);+#5380=STYLED_ITEM('color',(#5201),#4308);+#5381=STYLED_ITEM('color',(#5201),#4318);+#5382=STYLED_ITEM('color',(#5201),#4328);+#5383=STYLED_ITEM('color',(#5201),#4336);+#5384=STYLED_ITEM('color',(#5201),#4346);+#5385=STYLED_ITEM('color',(#5201),#4356);+#5386=STYLED_ITEM('color',(#5201),#4366);+#5387=STYLED_ITEM('color',(#5201),#4376);+#5388=STYLED_ITEM('color',(#5201),#4386);+#5389=STYLED_ITEM('color',(#5201),#4396);+#5390=STYLED_ITEM('color',(#5201),#4406);+#5391=STYLED_ITEM('color',(#5201),#4414);+#5392=STYLED_ITEM('color',(#5201),#4424);+#5393=STYLED_ITEM('color',(#5201),#4434);+#5394=STYLED_ITEM('color',(#5201),#4444);+#5395=STYLED_ITEM('color',(#5201),#4454);+#5396=STYLED_ITEM('color',(#5201),#4464);+#5397=STYLED_ITEM('color',(#5201),#4474);+#5398=STYLED_ITEM('color',(#5201),#4484);+#5399=STYLED_ITEM('color',(#5201),#4492);+#5400=STYLED_ITEM('color',(#5201),#4502);+#5401=STYLED_ITEM('color',(#5201),#4512);+#5402=STYLED_ITEM('color',(#5201),#4522);+#5403=STYLED_ITEM('color',(#5201),#4532);+#5404=STYLED_ITEM('color',(#5201),#4542);+#5405=STYLED_ITEM('color',(#5201),#4552);+#5406=STYLED_ITEM('color',(#5201),#4560);+#5407=STYLED_ITEM('color',(#5201),#4571);+#5408=STYLED_ITEM('color',(#5201),#4580);+#5409=STYLED_ITEM('color',(#5201),#4590);+#5410=STYLED_ITEM('color',(#5201),#4600);+#5411=STYLED_ITEM('color',(#5201),#4610);+#5412=STYLED_ITEM('color',(#5201),#4620);+#5413=STYLED_ITEM('color',(#5201),#4629);+#5414=STYLED_ITEM('color',(#5201),#4639);+#5415=STYLED_ITEM('color',(#5201),#4649);+#5416=STYLED_ITEM('color',(#5201),#4658);+#5417=STYLED_ITEM('color',(#5201),#4668);+#5418=STYLED_ITEM('color',(#5201),#4678);+#5419=STYLED_ITEM('color',(#5201),#4688);+#5420=STYLED_ITEM('color',(#5201),#4698);+#5421=STYLED_ITEM('color',(#5201),#4706);+#5422=STYLED_ITEM('color',(#5201),#4716);+#5423=STYLED_ITEM('color',(#5201),#4726);+#5424=STYLED_ITEM('color',(#5201),#4735);+#5425=STYLED_ITEM('color',(#5201),#4745);+#5426=STYLED_ITEM('color',(#5201),#4755);+#5427=STYLED_ITEM('color',(#5201),#4765);+#5428=STYLED_ITEM('color',(#5201),#4775);+#5429=STYLED_ITEM('color',(#5201),#4783);+#5430=STYLED_ITEM('color',(#5201),#4793);+#5431=STYLED_ITEM('color',(#5201),#4803);+#5432=STYLED_ITEM('color',(#5201),#4812);+#5433=STYLED_ITEM('color',(#5201),#4822);+#5434=STYLED_ITEM('color',(#5201),#4832);+#5435=STYLED_ITEM('color',(#5201),#4842);+#5436=STYLED_ITEM('color',(#5201),#4852);+#5437=STYLED_ITEM('color',(#5201),#4860);+#5438=STYLED_ITEM('color',(#5201),#4870);+#5439=STYLED_ITEM('color',(#5201),#4880);+#5440=STYLED_ITEM('color',(#5201),#4889);+#5441=STYLED_ITEM('color',(#5201),#4899);+#5442=STYLED_ITEM('color',(#5201),#4909);+#5443=STYLED_ITEM('color',(#5201),#4919);+#5444=STYLED_ITEM('color',(#5201),#4929);+#5445=STYLED_ITEM('color',(#5201),#4937);+#5446=STYLED_ITEM('color',(#5201),#4947);+#5447=STYLED_ITEM('color',(#5201),#4957);+#5448=STYLED_ITEM('color',(#5201),#4966);+#5449=STYLED_ITEM('color',(#5201),#4976);+#5450=STYLED_ITEM('color',(#5201),#4986);+#5451=STYLED_ITEM('color',(#5201),#4996);+#5452=STYLED_ITEM('color',(#5201),#5006);+#5453=STYLED_ITEM('color',(#5201),#5014);+#5454=STYLED_ITEM('color',(#5201),#5024);+#5455=STYLED_ITEM('color',(#5201),#5034);+#5456=STYLED_ITEM('color',(#5201),#5043);+#5457=STYLED_ITEM('color',(#5201),#5053);+#5458=STYLED_ITEM('color',(#5201),#5063);+#5459=STYLED_ITEM('color',(#5201),#5073);+#5460=STYLED_ITEM('color',(#5201),#5083);+#5461=STYLED_ITEM('color',(#5201),#5091);+#5462=STYLED_ITEM('color',(#5201),#5101);+#5463=STYLED_ITEM('color',(#5201),#5111);+#5464=STYLED_ITEM('color',(#5201),#5120);+#5465=STYLED_ITEM('color',(#5201),#5130);+#5466=STYLED_ITEM('color',(#5201),#5140);+#5467=STYLED_ITEM('color',(#5201),#5150);+#5468=STYLED_ITEM('color',(#5201),#5160);+#5469=STYLED_ITEM('color',(#5470),#5168);+#5470=PRESENTATION_STYLE_ASSIGNMENT((#5471,#5477));+#5471=SURFACE_STYLE_USAGE(.BOTH.,#5472);+#5472=SURFACE_SIDE_STYLE('',(#5473));+#5473=SURFACE_STYLE_FILL_AREA(#5474);+#5474=FILL_AREA_STYLE('',(#5475));+#5475=FILL_AREA_STYLE_COLOUR('',#5476);+#5476=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#5477=CURVE_STYLE('',#5190,POSITIVE_LENGTH_MEASURE(0.1),#5476);+ENDSEC;+END-ISO-10303-21;
package.jsonadded+248@@ -0,0 +1,248 @@+{+ "slug": "ltc7003emse-trpbf",+ "version": "0.1.0",+ "type": "component",+ "description": "Analog Devices Gate Drivers, MSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "motor driver ics",+ "ltc7003emse#trpbf",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ltc7003emse-trpbf.kicad_sym",+ "ltc7003emse-trpbf.kicad_mod",+ "ltc7003emse-trpbf.glb",+ "ltc7003emse-trpbf.step",+ "ltc7003emse-trpbf.lbr",+ "docs/hero.png",+ "docs/ltc7003emse-trpbf-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ltc7003emse-trpbf-hero.glb",+ "ltc7003emse-trpbf-hero.overlay.json",+ "ltc7003emse-trpbf-etched.glb"+ ],+ "component": {+ "mpn": "LTC7003EMSE#TRPBF",+ "manufacturer": "Analog Devices",+ "package": "MSOP-16-EP",+ "pin_count": 17,+ "category": "Motor Driver ICs",+ "subcategory": "Gate Drivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908411639500800",+ "parts": {+ "symbol": "ltc7003emse-trpbf.kicad_sym",+ "footprint": "ltc7003emse-trpbf.kicad_mod",+ "model_3d": "ltc7003emse-trpbf-hero.glb",+ "model_3d_plain": "ltc7003emse-trpbf-etched.glb",+ "model_3d_step": "ltc7003emse-trpbf-etched.step",+ "model_3d_step_plain": "ltc7003emse-trpbf.step",+ "lbr": "ltc7003emse-trpbf.lbr"+ },+ "distributor_links": {+ "lcsc": "C690098",+ "digikey": "LTC7003EMSE#TRPBFTR-ND",+ "mouser": "584-7003EMSETRPBF"+ },+ "distributor_check": {+ "checked_at": "2026-10-20T23:22:27Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "LTC7003EMSE#TRPBFTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "584-7003EMSETRPBF",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "RUN",+ "type": "input",+ "description": "Run control input: a voltage above 1.21V enables normal operation, forcing it below 0.7V shuts the device down to about 1µA quiescent current, and a resistive divider from the input supply can set the undervoltage lockout."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Main supply pin, operating from 3.5V to 60V per the electrical characteristics, with a bypass capacitor of at least 0.1µF to GND."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_out",+ "description": "Output of the internal LDO that powers the gate drivers and internal circuitry, to be decoupled to GND with at least 1.0µF low-ESR ceramic, and never to be driven to a voltage greater than VIN."+ },+ {+ "number": "4",+ "name": "VCCUV",+ "type": "input",+ "description": "VCC undervoltage lockout reference input, where 0.4V to 1.5V on this pin is multiplied by 7 to set the gate drive UVLO, with short to GND giving 3.5V and open giving 7.0V."+ },+ {+ "number": "5",+ "name": "FAULT",+ "type": "output",+ "description": "Open-drain fault output that pulls low once the TIMER pin reaches the 1.3V fault threshold, with a typical pull-down impedance of 200Ω and no release until the overcurrent condition and cooldown period expire."+ },+ {+ "number": "6",+ "name": "TIMER",+ "type": "passive",+ "description": "Fault timer input where a capacitor CT from this pin to GND sets the fault warning, fault turn-off and retry periods, and a voltage above 3.5V disables the timer function."+ },+ {+ "number": "7",+ "name": "INP",+ "type": "input",+ "description": "CMOS-compatible input referenced to GND that sets the state of TGDN and TGUP, with an internal 1MΩ pull-down to GND that holds TGDN at TS during startup transients."+ },+ {+ "number": "8",+ "name": "OVLO",+ "type": "input",+ "description": "Overvoltage lockout input where a voltage above 1.21V pulls TGDN to TS and normal operation resumes below 1.11V, and it should be tied to GND when not used."+ },+ {+ "number": "9",+ "name": "ISET",+ "type": "input",+ "description": "Current trip threshold set pin where a resistor to GND sets the peak current threshold, with the voltage internally clamped between 0.4V and 1.5V and divided by 20, and leaving it open selects 30mV ΔVTH."+ },+ {+ "number": "10",+ "name": "IMON",+ "type": "output",+ "description": "Current monitor output whose voltage equals the sense voltage multiplied by 20 with a range of 0V to 1.5V referenced to GND."+ },+ {+ "number": "11",+ "name": "TGDN",+ "type": "output",+ "description": "High current gate driver pull-down that pulls the external MOSFET gate to TS, and should be tied directly to the MOSFET gate for the fastest turn-off."+ },+ {+ "number": "12",+ "name": "TGUP",+ "type": "output",+ "description": "High current gate driver pull-up that drives toward BST, and a series resistor to the external MOSFET gate can be used to limit turn-on inrush current."+ },+ {+ "number": "13",+ "name": "TS",+ "type": "power_in",+ "description": "Top (high side) source connection of the external MOSFET, or GND in ground-referenced applications, with an absolute range of -6V to 65V."+ },+ {+ "number": "14",+ "name": "BST",+ "type": "power_out",+ "description": "High side bootstrapped supply where an external capacitor of at least 0.1µF connects to TS and the voltage swing is 12V to (VIN + 12V)."+ },+ {+ "number": "15",+ "name": "SNS–",+ "type": "input",+ "description": "Current sense comparator input connected to the sense resistor through a minimum 100Ω resistor, with the sense resistor placed in series with the external MOSFET drain."+ },+ {+ "number": "16",+ "name": "SNS+",+ "type": "input",+ "description": "Current sense comparator input that should use a Kelvin connection to the sense resistor, with the trip threshold ΔVTH clamped between 20mV and 75mV."+ },+ {+ "number": "17",+ "name": "GND",+ "type": "power_in",+ "description": "Exposed pad ground that must be soldered to the PCB for rated electrical and thermal performance."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet gives pin names and functions but does not assign KiCad ERC classes; the types shown (; Pin 17 is the exposed die pad, printed as GND (Exposed Pad Pin 17) and not as a numbered lead; it is; The part ordering table lists LTC7003EMSE#TRPBF under 16-Lead Plastic MSOP with -40°C to 125°C, and "+ ],+ "pages_sent": 11,+ "cost_usd": 0.0742,+ "at": "2026-10-20T23:19:31"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908411639500800",+ "pages": 26,+ "sha256": "36f4c47ec9a56f55",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ltc7003emse-trpbf.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 4.039,+ 0.95+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "e807f0e0e2c0c408c18dc198f4fc826ff019157c0529c7e78e68c1aab270d826",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ltc7003emse-trpbf-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 4.039,+ 0.95+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "21a92895787390c814aa1ce4bf67b42330a4b9e8f216b20d9fe5d3637f14b11a",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+254@@ -0,0 +1,254 @@+{+ "slug": "ltc7003emse-trpbf",+ "version": "0.1.0",+ "type": "component",+ "description": "Analog Devices Gate Drivers, MSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "motor driver ics",+ "ltc7003emse#trpbf",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ltc7003emse-trpbf.kicad_sym",+ "ltc7003emse-trpbf.kicad_mod",+ "ltc7003emse-trpbf.glb",+ "ltc7003emse-trpbf.step",+ "ltc7003emse-trpbf.lbr",+ "docs/hero.png",+ "docs/ltc7003emse-trpbf-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ltc7003emse-trpbf-hero.glb",+ "ltc7003emse-trpbf-hero.overlay.json",+ "ltc7003emse-trpbf-etched.glb"+ ],+ "component": {+ "mpn": "LTC7003EMSE#TRPBF",+ "manufacturer": "Analog Devices",+ "package": "MSOP-16-EP",+ "pin_count": 17,+ "category": "Motor Driver ICs",+ "subcategory": "Gate Drivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908411639500800",+ "parts": {+ "symbol": "ltc7003emse-trpbf.kicad_sym",+ "footprint": "ltc7003emse-trpbf.kicad_mod",+ "model_3d": "ltc7003emse-trpbf-hero.glb",+ "model_3d_plain": "ltc7003emse-trpbf-etched.glb",+ "model_3d_step": "ltc7003emse-trpbf-etched.step",+ "model_3d_step_plain": "ltc7003emse-trpbf.step",+ "lbr": "ltc7003emse-trpbf.lbr"+ },+ "distributor_links": {+ "lcsc": "C690098",+ "digikey": "LTC7003EMSE#TRPBFTR-ND",+ "mouser": "584-7003EMSETRPBF"+ },+ "distributor_check": {+ "checked_at": "2026-10-20T23:22:27Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "LTC7003EMSE#TRPBFTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "584-7003EMSETRPBF",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "RUN",+ "type": "input",+ "description": "Run control input: a voltage above 1.21V enables normal operation, forcing it below 0.7V shuts the device down to about 1µA quiescent current, and a resistive divider from the input supply can set the undervoltage lockout."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Main supply pin, operating from 3.5V to 60V per the electrical characteristics, with a bypass capacitor of at least 0.1µF to GND."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_out",+ "description": "Output of the internal LDO that powers the gate drivers and internal circuitry, to be decoupled to GND with at least 1.0µF low-ESR ceramic, and never to be driven to a voltage greater than VIN."+ },+ {+ "number": "4",+ "name": "VCCUV",+ "type": "input",+ "description": "VCC undervoltage lockout reference input, where 0.4V to 1.5V on this pin is multiplied by 7 to set the gate drive UVLO, with short to GND giving 3.5V and open giving 7.0V."+ },+ {+ "number": "5",+ "name": "FAULT",+ "type": "output",+ "description": "Open-drain fault output that pulls low once the TIMER pin reaches the 1.3V fault threshold, with a typical pull-down impedance of 200Ω and no release until the overcurrent condition and cooldown period expire."+ },+ {+ "number": "6",+ "name": "TIMER",+ "type": "passive",+ "description": "Fault timer input where a capacitor CT from this pin to GND sets the fault warning, fault turn-off and retry periods, and a voltage above 3.5V disables the timer function."+ },+ {+ "number": "7",+ "name": "INP",+ "type": "input",+ "description": "CMOS-compatible input referenced to GND that sets the state of TGDN and TGUP, with an internal 1MΩ pull-down to GND that holds TGDN at TS during startup transients."+ },+ {+ "number": "8",+ "name": "OVLO",+ "type": "input",+ "description": "Overvoltage lockout input where a voltage above 1.21V pulls TGDN to TS and normal operation resumes below 1.11V, and it should be tied to GND when not used."+ },+ {+ "number": "9",+ "name": "ISET",+ "type": "input",+ "description": "Current trip threshold set pin where a resistor to GND sets the peak current threshold, with the voltage internally clamped between 0.4V and 1.5V and divided by 20, and leaving it open selects 30mV ΔVTH."+ },+ {+ "number": "10",+ "name": "IMON",+ "type": "output",+ "description": "Current monitor output whose voltage equals the sense voltage multiplied by 20 with a range of 0V to 1.5V referenced to GND."+ },+ {+ "number": "11",+ "name": "TGDN",+ "type": "output",+ "description": "High current gate driver pull-down that pulls the external MOSFET gate to TS, and should be tied directly to the MOSFET gate for the fastest turn-off."+ },+ {+ "number": "12",+ "name": "TGUP",+ "type": "output",+ "description": "High current gate driver pull-up that drives toward BST, and a series resistor to the external MOSFET gate can be used to limit turn-on inrush current."+ },+ {+ "number": "13",+ "name": "TS",+ "type": "power_in",+ "description": "Top (high side) source connection of the external MOSFET, or GND in ground-referenced applications, with an absolute range of -6V to 65V."+ },+ {+ "number": "14",+ "name": "BST",+ "type": "power_out",+ "description": "High side bootstrapped supply where an external capacitor of at least 0.1µF connects to TS and the voltage swing is 12V to (VIN + 12V)."+ },+ {+ "number": "15",+ "name": "SNS–",+ "type": "input",+ "description": "Current sense comparator input connected to the sense resistor through a minimum 100Ω resistor, with the sense resistor placed in series with the external MOSFET drain."+ },+ {+ "number": "16",+ "name": "SNS+",+ "type": "input",+ "description": "Current sense comparator input that should use a Kelvin connection to the sense resistor, with the trip threshold ΔVTH clamped between 20mV and 75mV."+ },+ {+ "number": "17",+ "name": "GND",+ "type": "power_in",+ "description": "Exposed pad ground that must be soldered to the PCB for rated electrical and thermal performance."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet gives pin names and functions but does not assign KiCad ERC classes; the types shown (; Pin 17 is the exposed die pad, printed as GND (Exposed Pad Pin 17) and not as a numbered lead; it is; The part ordering table lists LTC7003EMSE#TRPBF under 16-Lead Plastic MSOP with -40°C to 125°C, and "+ ],+ "pages_sent": 11,+ "cost_usd": 0.0742,+ "at": "2026-10-20T23:19:31"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908411639500800",+ "pages": 26,+ "sha256": "36f4c47ec9a56f55",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ltc7003emse-trpbf.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 4.039,+ 0.95+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "e807f0e0e2c0c408c18dc198f4fc826ff019157c0529c7e78e68c1aab270d826",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ltc7003emse-trpbf-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 4.039,+ 0.95+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "21a92895787390c814aa1ce4bf67b42330a4b9e8f216b20d9fe5d3637f14b11a",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>ltc7003emse-trpbf</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>ltc7003emse-trpbf</title>