LTC4365HTS8#TRPBF
Public Made by Adomby adom
Analog Devices Power Management - Specialized, TSOT-23-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
KiCad symbol pin numbers are reversed vs the datasheet (TSOT-23-8)
The KiCad symbol on this page (ltc4365hts8-trpbf.kicad_sym) has every pin number mirrored relative to the datasheet. A board drawn from it would connect all eight pins to the wrong pads.
Datasheet (LTC4365 Pin Configuration, TS8 package, 8-lead plastic TSOT-23, top view):
| Pin | Name |
|---|---|
| 1 | VIN |
| 2 | UV |
| 3 | OV |
| 4 | GND |
| 5 | SHDN |
| 6 | FAULT |
| 7 | VOUT |
| 8 | GATE |
Symbol on this page (read from the .kicad_sym):
| Pin | Name |
|---|---|
| 1 | GATE |
| 2 | VOUT |
| 3 | FAULT |
| 4 | SHDN |
| 5 | VIN |
| 6 | UV |
| 7 | OV |
| 8 | GND |
Each symbol pin number equals 9 minus the datasheet pin number. It also does not match the DDB (DFN) package, which is 1 GND, 2 OV, 3 UV, 4 VIN, 5 GATE, 6 VOUT, 7 FAULT, 8 SHDN.
Fix: renumber the symbol pins to the TS8 table above. The README pinout table and the .lbr are worth checking for the same reversal, since they were probably generated from the same extraction.
0 Replies
Log in to reply.