component
LTC2801IDE#PBF
Public Made by Adomby adom
Analog Devices RS232 ICs, DFN-12-EP(3x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+4904
README.md+109docs/hero.pngdocs/ltc2801ide-pbf-datasheet.pdfltc2801ide-pbf-etched.glbltc2801ide-pbf-hero.glbltc2801ide-pbf-hero.overlay.json+361ltc2801ide-pbf.glbltc2801ide-pbf.kicad_mod+295ltc2801ide-pbf.kicad_sym+65ltc2801ide-pbf.lbr+140ltc2801ide-pbf.step+3478package.json+224page.json+230viewers/footprint.html+1viewers/symbol.html+1README.mdadded+109@@ -0,0 +1,109 @@+# LTC2801IDE#PBF++**Analog Devices** · RS232 ICs · DFN-12-EP(3x4)++LTC2801IDE#PBF from Analog Devices, in a DFN-12-EP(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RIN | input | RS-232 receiver input with an internal 5kΩ termination resistor, rated for -25V to 25V absolute maximum. |+| 2 | TOUT | output | RS-232 driver output, which can be shorted to ground or driven up to ±15V without damage (absolute maximum -15V to 15V). |+| 3 | VCC | power_in | Input supply pin for 1.8V to 5.5V operation, to be bypassed to GND with a 1µF capacitor. |+| 4 | VDD | power_out | Generated positive supply for the RS-232 driver, regulated to 7V, with a 1µF capacitor connected between VDD and GND. |+| 5 | SW | passive | Switch pin of the DC-DC converter, which connects to a 10µH inductor between SW and VCC. |+| 6 | GND | power_in | Ground reference for the device. |+| 7 | CAP | passive | Charge-pump capacitor for the generated negative supply, with a 220nF capacitor connected between CAP and SW. |+| 8 | PS | input | Power supply control pin, referenced to VL, that enables the integrated DC-DC converter (absolute maximum -0.3V to VL + 0.3V). |+| 9 | MODE | input | Mode control pin, referenced to VL, that selects the operating mode per Table 1 (absolute maximum -0.3V to 7V). |+| 10 | VL | power_in | Logic supply for the receiver outputs, driver inputs and control inputs, operating from 1.8V to 5.5V and bypassed with 220nF if not tied to VCC. |+| 11 | TIN | input | Driver input referenced to VL (absolute maximum -0.3V to 7V). |+| 12 | ROUT | output | Receiver output referenced to VL, short-circuit protected to GND, VCC and VL, and high impedance in Shutdown mode. |+| 13 | VEE | power_out | Generated negative supply for the RS-232 driver, regulated to -6.3V, with a 1µF capacitor between VEE and GND; this is also the exposed backside thermal pad, which must be soldered to the PCB. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Analog Devices |+| Package | DFN-12-EP(3x4) |+| Category | Communication Interface Chip/UART/485/232 |+| Pins | 13 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| VCC Supply Current, Normal Mode (Outputs Unloaded) | ICC | | 2.3 | | mA | Outputs Unloaded, Normal Mode (Note 3) | 3 |+| VCC Supply Current, Receivers Active Mode | ICC | | 1 | 10 | µA | Receivers Active Mode | 3 |+| VCC Supply Current, Shutdown Mode | ICC | | 1 | 10 | µA | Shutdown Mode | 3 |+| VL Supply Current, Normal Mode (LTC2801, LTC2802) | IL | | 0.08 | 0.15 | mA | Outputs Unloaded, Normal Mode (LTC2801, LTC2802) | 3 |+| VL Supply Current, Receivers Active Mode | IL | | 15 | 30 | µA | Receivers Active Mode | 3 |+| VL Supply Current, Shutdown Mode | IL | | 1 | 10 | µA | Shutdown Mode | 3 |+| Driver Output Voltage Low | VOLD | -5 | -5.7 | | V | RL = 3kΩ, Low | 3 |+| Driver Output Voltage High | VOHD | 5 | 6.2 | | V | RL = 3kΩ, High | 3 |+| Output Short Circuit Current (driver) | IOSD | -70 | 35 | 70 | mA | VL = VCC = 5.5V; VTOUT = 0V | 3 |+| Power-Off Output Leakage Current | IPOLD | -10 | 0.1 | 10 | µA | VL = VCC = VDD = VEE = 0V; VTOUT = ±2V | 3 |+| Output Leakage Current | IOLD | -10 | 0.1 | 10 | µA | Shutdown or Receivers Active or Drivers Disabled Modes, -15V ≤ VTOUT ≤ 15V | 3 |+| Input Threshold, Receivers Active Mode | VIR | 0.8 | 1.5 | 2.4 | V | Receivers Active Mode | 3 |+| Input Threshold, Normal Mode, Input Low | VILR | 0.8 | | 1.3 | V | Normal Mode, Input Low | 3 |+| Input Threshold, Normal Mode, Input High | VIHR | 1.7 | | 2.5 | V | Normal Mode, Input High | 3 |+| Input Hysteresis, Normal Mode | VHYSR | 0.1 | 0.4 | 1 | V | Normal Mode | 3 |+| Receiver Output Voltage Low | VOLR | | 0.2 | 0.4 | V | Output Low, IROUT = 1mA (Sinking) | 3 |+| Receiver Input Resistance | RIN | 3 | 5 | 7 | kΩ | -15V ≤ VRIN ≤ 15V | 3 |+| Receiver Output Short Circuit Current | IOSR | -50 | 25 | 50 | mA | VL = 5.5V; 0V ≤ VROUT ≤ VL | 3 |+| Logic Input Voltage Threshold (lower limit; upper limit printed as 0.67 • VL) | | 0.4 | | | V | | 3 |+| Logic Input Current | IIN | -1 | | 1 | µA | | 3 |+| Maximum Data Rate (LTC2801) | | 100 | | | kbps | RL = 3kΩ, CL = 2.5nF (Note 3) | 4 |+| Maximum Data Rate (LTC2801) | | 250 | | | kbps | RL = 3kΩ, CL = 1nF (Note 3) | 4 |+| Driver Slew Rate (LTC2801) | SR(D) | 4 | | | V/µs | VCC = VL = 1.8V, RL = 3kΩ, CL = 2.5nF (Figure 1) | 4 |+| Driver Slew Rate (LTC2801) | SR(D) | 30 | | | V/µs | VCC = VL = 5.5V, RL = 3kΩ, CL = 50pF (Figure 1) | 4 |+| Driver Propagation Delay (LTC2801) | tPHLD, tPLHD | | 1 | 2 | µs | RL = 3kΩ, CL = 50pF (Figure 2) | 4 |+| Driver Skew (LTC2801) | tSKEWD | | | 100 | ns | RL = 3kΩ, CL = 50pF (Figure 2) | 4 |+| Driver Output Enable Time | tPZHD, tPZLD | | 0.6 | 2 | µs | PS = VL, MODE = ↑, RL = 3kΩ, CL = 50pF (Figure 4) | 4 |+| Driver Output Disable Time | tPHZD, tPLZD | | 0.3 | 2 | µs | PS = VL, MODE = ↓, RL = 3kΩ, CL = 50pF (Figure 4) | 4 |+| Receiver Propagation Delay | tPHLR, tPLHR | | 0.2 | 0.4 | µs | CL = 150pF (Figure 3) | 4 |+| Receiver Skew | tSKEWR | | | 50 | ns | CL = 150pF (Figure 3) | 4 |+| Receiver Rise or Fall Time | tRR, tFR | | 60 | 200 | ns | CL = 150pF (Figure 3) | 4 |+| Shutdown to Receiver Output Enable | tPZHR, tPZLR | | 5 | 15 | µs | PS = MODE = ↑ or ON/OFF = ↑, RL = 1kΩ, CL = 150pF (Figure 5) | 4 |+| Receiver Output Disable upon Shutdown | tPHZR, tPLZR | | 0.15 | 0.3 | µs | PS = MODE = ↓ or ON/OFF = ↓, RL = 1kΩ, CL = 150pF (Figure 5) | 4 |+| VDD/VEE Supply Rise Time | | | 0.2 | 2 | ms | Notes 3 and 4 | 4 |+| VCC Input Supply Voltage | VCC | 1.8 | | 5.5 | V | Test conditions range | 3 |+| VL Logic Supply Voltage | VL | 1.8 | | 5.5 | V | Test conditions range | 3 |+| Operating Temperature (LTC280XI, -40C to 85C grade) | | -40 | | 85 | °C | LTC280XI grade | 2 |+| VCC (absolute maximum) | VCC | -0.3 | | 7 | V | | 2 |+| VL (absolute maximum) | VL | -0.3 | | 6.7 | V | | 2 |+| VDD (absolute maximum; min printed as VCC -0.3V) | VDD | | | 7.5 | V | | 2 |+| VEE (absolute maximum; printed as 0.3V to -7.5V) | VEE | -7.5 | | 0.3 | V | | 2 |+| VDD, VEE (absolute maximum) | VDD, VEE | | | 14 | V | | 2 |+| SW (absolute maximum; max printed as VDD + 0.3V) | SW | -0.3 | | | V | | 2 |+| CAP (absolute maximum; min printed as VEE, 0.3V) | CAP | | | 0.3 | V | | 2 |+| TIN, T1IN, T2IN, MODE (absolute maximum) | TIN | -0.3 | | 7 | V | | 2 |+| PS, ON/OFF (absolute maximum; max printed as VL + 0.3V) | PS | -0.3 | | | V | | 2 |+| RIN, R1IN, R2IN (absolute maximum) | RIN | -25 | | 25 | V | | 2 |+| TOUT, T1OUT, T2OUT (absolute maximum) | TOUT | -15 | | 15 | V | | 2 |+| ROUT, R1OUT, R2OUT (absolute maximum; max printed as VL + 0.3V) | ROUT | -0.3 | | | V | | 2 |+| Storage Temperature Range | | -65 | | 125 | °C | | 2 |+| Thermal Resistance Junction-to-Ambient (DE 12-lead DFN, 4 layer) | θJA | | 43 | | °C/W | 4 Layer | 2 |+| Thermal Resistance Junction-to-Case (DE 12-lead DFN, 4 layer) | θJC | | 4.3 | | °C/W | 4 Layer | 2 |+| Maximum Junction Temperature (DE package) | TJMAX | | | 125 | °C | DE package | 2 |++## CAD (KiCad official)++- Symbol: `LTC2801IDE#PBF`+- Footprint: `Package_DFN_QFN:DFN-12-1EP_3x4mm_P0.5mm_EP1.7x3.3mm`+- 3D model: DFN-12-EP(3x4) (KiCad packages3D, STEP)+- 3D model files: `ltc2801ide-pbf-etched.step` / `ltc2801ide-pbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc2801ide-pbf.step` / `ltc2801ide-pbf.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590144529857601536) (18 pp, sha256 `e9ad4ef1183d2db6`, retrieved 2026-10-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ltc2801ide-pbf-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/ltc2801ide-pbf-datasheet.pdfadded⋯ 1 unchanged line ⋯
ltc2801ide-pbf-etched.glbadded⋯ 1 unchanged line ⋯
ltc2801ide-pbf-hero.glbadded⋯ 1 unchanged line ⋯
ltc2801ide-pbf-hero.overlay.jsonadded+361@@ -0,0 +1,361 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LTC2801IDE#PBF",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 13,+ "span_mm": 5.8,+ "dash_mm": 0.145,+ "gap_mm": 0.087,+ "pad_stroke_mm": 0.0348+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 12,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.288,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -1.5,+ 1.5,+ -1.99,+ 1.99+ ],+ "pads_bbox_mm": [+ -1.8,+ 1.8,+ -1.65,+ 1.65+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "ltc2801ide-pbf-etched.glb",+ "glb_sha256": "d124824d4ee61bdf2281d6d4d79eadb124dfab0ea3666be520e5b5d41abd5e72",+ "footprint": "ltc2801ide-pbf.kicad_mod",+ "footprint_sha256": "717c1241d8610b65834ecf16cbb8bad06e1e80557fb586eeec06e3e20bd0b939",+ "pins": "page.json component.pins",+ "pins_sha256": "77e6cc4483348c3baf9147ce70baf13daa9278d0a1ed396632af39841b8fd9b4"+ },+ "generator": "adom-wiki 1.7.76 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "RIN",+ "x": -1.9,+ "y": -1.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "2",+ "text": "TOUT",+ "x": -1.9,+ "y": -0.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "3",+ "text": "VCC",+ "x": -1.9,+ "y": -0.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "4",+ "text": "VDD",+ "x": -1.9,+ "y": 0.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "5",+ "text": "SW",+ "x": -1.9,+ "y": 0.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "6",+ "text": "GND",+ "x": -1.9,+ "y": 1.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "7",+ "text": "CAP",+ "x": 1.9,+ "y": 1.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "8",+ "text": "PS",+ "x": 1.9,+ "y": 0.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "9",+ "text": "MODE",+ "x": 1.9,+ "y": 0.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "10",+ "text": "VL",+ "x": 1.9,+ "y": -0.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "11",+ "text": "TIN",+ "x": 1.9,+ "y": -0.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "12",+ "text": "ROUT",+ "x": 1.9,+ "y": -1.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "rect",+ "center_mm": [+ -1.45,+ -1.25+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "rect",+ "center_mm": [+ -1.45,+ -0.75+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "rect",+ "center_mm": [+ -1.45,+ -0.25+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "rect",+ "center_mm": [+ -1.45,+ 0.25+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "rect",+ "center_mm": [+ -1.45,+ 0.75+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "rect",+ "center_mm": [+ -1.45,+ 1.25+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "rect",+ "center_mm": [+ 1.45,+ 1.25+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "rect",+ "center_mm": [+ 1.45,+ 0.75+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ 1.45,+ 0.25+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "rect",+ "center_mm": [+ 1.45,+ -0.25+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "rect",+ "center_mm": [+ 1.45,+ -0.75+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "rect",+ "center_mm": [+ 1.45,+ -1.25+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 1.7,+ 3.3+ ],+ "rot": 0.0+ }+ ]+}
ltc2801ide-pbf.glbadded⋯ 1 unchanged line ⋯
ltc2801ide-pbf.kicad_modadded+295@@ -0,0 +1,295 @@+(footprint "DFN-12-1EP_3x4mm_P0.5mm_EP1.7x3.3mm"+ (version 20260206)+ (generator "pcbnew")+ (generator_version "10.0")+ (layer "F.Cu")+ (descr "DE/UE Package; 12-Lead Plastic DFN (4mm x 3mm) (see Linear Technology DFN_12_05-08-1695.pdf)")+ (tags "DFN 0.5")+ (property "Reference" "REF**"+ (at 0 -3.05 0)+ (layer "F.SilkS")+ (uuid "08103d11-2a34-491e-8464-b64eae8d2e6c")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "DFN-12-1EP_3x4mm_P0.5mm_EP1.7x3.3mm"+ (at 0 3.05 0)+ (layer "F.Fab")+ (uuid "f57dce05-289e-4042-b4d6-832a4a21f140")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Datasheet" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "fc358da2-2fe6-4f07-8f5d-bdd83448da3b")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (property "Description" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "a92c93cd-55a0-4316-9b74-bbcee2cc200a")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -1.5 -2.11)+ (end 1.5 -2.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "3c80c6c2-aa5e-438a-9d46-f1aec3750f98")+ )+ (fp_line+ (start -1.5 2.11)+ (end 1.5 2.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "2ba17e06-fcda-4c07-88a6-45caf0d15b5e")+ )+ (fp_poly+ (pts+ (xy -1.99 -1.56) (xy -2.47 -1.56) (xy -1.99 -2.04) (xy -1.99 -1.56)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ (uuid "eafe340a-00f2-4a3a-87a0-8871d3b2bc22")+ )+ (fp_line+ (start -1.5 -1.25)+ (end -0.75 -2)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "0912390a-8c48-47da-80e1-c8d81ae131b8")+ )+ (fp_line+ (start -1.5 2)+ (end -1.5 -1.25)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "a03653cd-d164-43ad-8827-ebd80b8f2a4a")+ )+ (fp_line+ (start -0.75 -2)+ (end 1.5 -2)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "8110ae67-3578-41b4-bfff-82d023265a3a")+ )+ (fp_line+ (start 1.5 -2)+ (end 1.5 2)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "e6faee1d-cea8-4e93-a9ff-7a61b9a3eeb8")+ )+ (fp_line+ (start 1.5 2)+ (end -1.5 2)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "0438139d-2cb1-432b-926c-628c034b9c4c")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 90)+ (layer "F.Fab")+ (uuid "bbbe22bd-b7ad-4696-a116-873c9a441f54")+ (effects+ (font+ (size 0.7 0.7)+ (thickness 0.105)+ )+ )+ )+ (pad "" smd rect+ (at -0.425 -1.2375)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "271e7701-a683-4960-aa07-ed5f7324f586")+ )+ (pad "" smd rect+ (at -0.425 -0.4125)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "a0d46865-00c6-483b-8d73-e47846f84590")+ )+ (pad "" smd rect+ (at -0.425 0.4125)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "cd023e05-c2bb-43fe-bb2f-2b81efecf5aa")+ )+ (pad "" smd rect+ (at -0.425 1.2375)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "d136ea9d-f8f0-4fd8-b7d8-dd5b01381515")+ )+ (pad "" smd rect+ (at 0.425 -1.2375)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "29c4add8-533d-4a3b-883f-6c005a4ab784")+ )+ (pad "" smd rect+ (at 0.425 -0.4125)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "e275afad-e70f-4629-a479-3f88965daeb3")+ )+ (pad "" smd rect+ (at 0.425 0.4125)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "d3e81f22-6b5e-47fa-90b6-767b69a97d66")+ )+ (pad "" smd rect+ (at 0.425 1.2375)+ (size 0.685 0.67)+ (layers "F.Paste")+ (uuid "4d57a579-81f9-4153-8016-f906f785ab22")+ )+ (pad "1" smd rect+ (at -1.45 -1.25)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "3fdf3b64-851b-4b08-8996-95d6a762d502")+ )+ (pad "2" smd rect+ (at -1.45 -0.75)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "4cf4fdd5-eb8a-4842-a492-8d7028ac9ac2")+ )+ (pad "3" smd rect+ (at -1.45 -0.25)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "df471ed0-f7e1-4b9e-8da5-9e13797a81d0")+ )+ (pad "4" smd rect+ (at -1.45 0.25)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "8d68ff2d-7c24-41f8-bd90-5dff0cd3e070")+ )+ (pad "5" smd rect+ (at -1.45 0.75)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "1f5b0eab-3e27-4cfa-af28-2e089faf1f9b")+ )+ (pad "6" smd rect+ (at -1.45 1.25)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "5b5da3dc-b026-43a3-b201-9c8251dede89")+ )+ (pad "7" smd rect+ (at 1.45 1.25)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "f5c73868-9c1b-47da-9f13-f724e6d3ac0b")+ )+ (pad "8" smd rect+ (at 1.45 0.75)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "200227df-156f-48d7-9af5-d5457f9343ef")+ )+ (pad "9" smd rect+ (at 1.45 0.25)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "671beec6-eecf-4424-840f-5361cf9b30c6")+ )+ (pad "10" smd rect+ (at 1.45 -0.25)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "4b088d3b-8098-4fb2-bd6b-bbf9f71d0826")+ )+ (pad "11" smd rect+ (at 1.45 -0.75)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "baaacb83-596b-417c-b684-c8510349990b")+ )+ (pad "12" smd rect+ (at 1.45 -1.25)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "bb2c1585-4955-429f-a20f-de0a55cd3518")+ )+ (pad "13" smd rect+ (at 0 0)+ (size 1.7 3.3)+ (layers "F.Cu" "F.Mask")+ (uuid "fa95a70e-9994-4f3a-9463-b65810647686")+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_DFN_QFN.3dshapes/DFN-12-1EP_3x4mm_P0.5mm_EP1.7x3.3mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+ (fp_poly+ (pts (xy -2.05 -1.63) (xy -1.75 -1.63) (xy -1.75 -2.25) (xy 1.75 -2.25) (xy 1.75 -1.63) (xy 2.05 -1.63) (xy 2.05 1.63) (xy 1.75 1.63) (xy 1.75 2.25) (xy -1.75 2.25) (xy -1.75 1.63) (xy -2.05 1.63))+ (stroke (width 0.05) (type solid))+ (fill no)+ (layer "F.CrtYd")+ )+)
ltc2801ide-pbf.kicad_symadded+65@@ -0,0 +1,65 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "LTC2801IDE#PBF" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 12.70 0) (effects (font (size 1.27 1.27))))+ (property "Value" "LTC2801IDE#PBF" (at 0 -12.70 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "LTC2801IDE#PBF_0_1"+ (rectangle (start -12.70 10.16) (end 12.70 -10.16)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "LTC2801IDE#PBF_1_1"+ (pin input line (at -17.78 7.62 0) (length 5.08)+ (name "RIN" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 5.08 0) (length 5.08)+ (name "TOUT" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 2.54 0) (length 5.08)+ (name "VCC" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin power_out line (at -17.78 0.00 0) (length 5.08)+ (name "VDD" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at -17.78 -2.54 0) (length 5.08)+ (name "SW" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -5.08 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at -17.78 -7.62 0) (length 5.08)+ (name "CAP" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin power_out line (at 17.78 5.08 180) (length 5.08)+ (name "VEE" (effects (font (size 1.27 1.27))))+ (number "13" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 2.54 180) (length 5.08)+ (name "ROUT" (effects (font (size 1.27 1.27))))+ (number "12" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 0.00 180) (length 5.08)+ (name "TIN" (effects (font (size 1.27 1.27))))+ (number "11" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -2.54 180) (length 5.08)+ (name "VL" (effects (font (size 1.27 1.27))))+ (number "10" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -5.08 180) (length 5.08)+ (name "MODE" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -7.62 180) (length 5.08)+ (name "PS" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
ltc2801ide-pbf.lbradded+140@@ -0,0 +1,140 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="DFN-12-1EP_3x4mm_P0.5mm_EP1.7x3.3mm">+ <description>DFN-12-1EP, 3 x 4 mm, 0.5 mm pitch. DE/UE Package; 12-Lead Plastic DFN (4mm x 3mm) (see Linear Technology DFN_12_05-08-1695.pdf)</description>+ <smd name="1" x="-1.4500" y="1.2500" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="2" x="-1.4500" y="0.7500" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="3" x="-1.4500" y="0.2500" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="4" x="-1.4500" y="-0.2500" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="5" x="-1.4500" y="-0.7500" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="6" x="-1.4500" y="-1.2500" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="7" x="1.4500" y="-1.2500" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="8" x="1.4500" y="-0.7500" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="9" x="1.4500" y="-0.2500" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="10" x="1.4500" y="0.2500" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="11" x="1.4500" y="0.7500" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="12" x="1.4500" y="1.2500" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="13" x="0.0000" y="-0.0000" dx="1.7000" dy="3.3000" layer="1" cream="no"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.9900" y="1.5600"/>+ <vertex x="-2.4700" y="1.5600"/>+ <vertex x="-1.9900" y="2.0400"/>+ <vertex x="-1.9900" y="1.5600"/>+ </polygon>+ <wire x1="-1.5000" y1="2.1100" x2="1.5000" y2="2.1100" width="0.1200" layer="21"/>+ <wire x1="-1.5000" y1="-2.1100" x2="1.5000" y2="-2.1100" width="0.1200" layer="21"/>+ <wire x1="-1.5000" y1="1.2500" x2="-0.7500" y2="2.0000" width="0.1000" layer="51"/>+ <wire x1="-1.5000" y1="-2.0000" x2="-1.5000" y2="1.2500" width="0.1000" layer="51"/>+ <wire x1="-0.7500" y1="2.0000" x2="1.5000" y2="2.0000" width="0.1000" layer="51"/>+ <wire x1="1.5000" y1="2.0000" x2="1.5000" y2="-2.0000" width="0.1000" layer="51"/>+ <wire x1="1.5000" y1="-2.0000" x2="-1.5000" y2="-2.0000" width="0.1000" layer="51"/>+ <text x="0" y="2.710" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-2.710" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="LTC2801IDE#PBF">+ <wire x1="-12.7" y1="10.16" x2="12.7" y2="10.16" width="0.254" layer="94"/>+ <wire x1="12.7" y1="10.16" x2="12.7" y2="-10.16" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-10.16" x2="-12.7" y2="-10.16" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-10.16" x2="-12.7" y2="10.16" width="0.254" layer="94"/>+ <text x="0.0000" y="12.7000" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-12.7000" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="RIN" x="-17.78" y="7.62" length="middle" direction="in"/>+ <pin name="TOUT" x="-17.78" y="5.08" length="middle" direction="out"/>+ <pin name="VCC" x="-17.78" y="2.54" length="middle" direction="pwr"/>+ <pin name="VDD" x="-17.78" y="0" length="middle" direction="out"/>+ <pin name="SW" x="-17.78" y="-2.54" length="middle" direction="pas"/>+ <pin name="GND" x="-17.78" y="-5.08" length="middle" direction="pwr"/>+ <pin name="CAP" x="-17.78" y="-7.62" length="middle" direction="pas"/>+ <pin name="VEE" x="17.78" y="5.08" length="middle" direction="out" rot="R180"/>+ <pin name="ROUT" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>+ <pin name="TIN" x="17.78" y="0" length="middle" direction="in" rot="R180"/>+ <pin name="VL" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>+ <pin name="MODE" x="17.78" y="-5.08" length="middle" direction="in" rot="R180"/>+ <pin name="PS" x="17.78" y="-7.62" length="middle" direction="in" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="LTC2801IDE#PBF" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="LTC2801IDE#PBF" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="DFN-12-1EP_3x4mm_P0.5mm_EP1.7x3.3mm">+ <connects>+ <connect gate="G$1" pin="RIN" pad="1"/>+ <connect gate="G$1" pin="TOUT" pad="2"/>+ <connect gate="G$1" pin="VCC" pad="3"/>+ <connect gate="G$1" pin="VDD" pad="4"/>+ <connect gate="G$1" pin="SW" pad="5"/>+ <connect gate="G$1" pin="GND" pad="6"/>+ <connect gate="G$1" pin="CAP" pad="7"/>+ <connect gate="G$1" pin="VEE" pad="13"/>+ <connect gate="G$1" pin="ROUT" pad="12"/>+ <connect gate="G$1" pin="TIN" pad="11"/>+ <connect gate="G$1" pin="VL" pad="10"/>+ <connect gate="G$1" pin="MODE" pad="9"/>+ <connect gate="G$1" pin="PS" pad="8"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
ltc2801ide-pbf.stepadded+3478@@ -0,0 +1,3478 @@+ISO-10303-21; +HEADER; +/* DFN-12-1EP_3x4mm_Pitch0.5mm.step 3D STEP model for use in ECAD systems + * Copyright (C) 2017, kicad StepUp + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see http://www.gnu.org/licenses/. + * + * As a special exception, if you create a design which uses this symbol, + * and embed this symbol or unaltered portions of this symbol into the design, + * this symbol does not by itself cause the resulting design to be covered by + * the GNU General Public License. + * This exception does not however invalidate any other reasons why the design + * itself might be covered by the GNU General Public License. + * If you modify this symbol, you may extend this exception to your version of the symbol, + * but you are not obligated to do so. + * If you do not wish to do so, delete this exception statement from your version + * Risk disclaimer + * *USE 3D CAD DATA AT YOUR OWN RISK* + * *DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.* + * + */ + +FILE_DESCRIPTION( +/* description */ ('model of DFN-12-1EP_3x4mm_Pitch0.5mm'), +/* implementation_level */ '2;1'); + +FILE_NAME( +/* name */ 'DFN-12-1EP_3x4mm_Pitch0.5mm.step', +/* time_stamp */ '2017-03-23T11:13:21', +/* author */ ('kicad StepUp','ksu'), +/* organization */ ('FreeCAD'), +/* preprocessor_version */ 'OCC', +/* originating_system */ 'kicad StepUp', +/* authorisation */ ''); + +FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }')); +ENDSEC; + +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft', +'automotive_design',1997,#2); +#2 = APPLICATION_CONTEXT( +'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('DFN-12-1EP_3x4mm_Pitch0.5mm','DFN-12-1EP_3x4mm_Pitch0.5mm' +,'',(#8)); +#8 = MECHANICAL_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#2785); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000)); +#13 = DIRECTION('',(0.E+000,0.E+000,1.)); +#14 = DIRECTION('',(1.,0.E+000,-0.E+000)); +#15 = MANIFOLD_SOLID_BREP('',#16); +#16 = CLOSED_SHELL('',(#17,#65,#96,#120,#144,#168,#185,#628,#797,#821, +#861,#1023,#1048,#1088,#1121,#1146,#1179,#1219,#1244,#1284,#1317, +#1342,#1375,#1415,#1440,#1480,#1513,#1538,#1571,#1611,#1636,#1676, +#1709,#1734,#1767,#1807,#1832,#1872,#1905,#1930,#1963,#2003,#2028, +#2068,#2101,#2126,#2159,#2176,#2199,#2216,#2233,#2250,#2267,#2284, +#2301,#2318,#2330,#2347,#2364,#2381,#2398,#2415,#2432,#2449,#2461, +#2478,#2490,#2507,#2519,#2536,#2548,#2565,#2577,#2594,#2606,#2623, +#2635,#2652,#2664,#2681,#2693,#2710,#2722,#2739,#2751,#2776)); +#17 = ADVANCED_FACE('',(#18),#60,.T.); +#18 = FACE_BOUND('',#19,.F.); +#19 = EDGE_LOOP('',(#20,#30,#38,#46,#54)); +#20 = ORIENTED_EDGE('',*,*,#21,.T.); +#21 = EDGE_CURVE('',#22,#24,#26,.T.); +#22 = VERTEX_POINT('',#23); +#23 = CARTESIAN_POINT('',(-0.85,1.4,0.E+000)); +#24 = VERTEX_POINT('',#25); +#25 = CARTESIAN_POINT('',(-0.85,-1.65,0.E+000)); +#26 = LINE('',#27,#28); +#27 = CARTESIAN_POINT('',(-0.85,1.4,0.E+000)); +#28 = VECTOR('',#29,1.); +#29 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#30 = ORIENTED_EDGE('',*,*,#31,.T.); +#31 = EDGE_CURVE('',#24,#32,#34,.T.); +#32 = VERTEX_POINT('',#33); +#33 = CARTESIAN_POINT('',(0.85,-1.65,0.E+000)); +#34 = LINE('',#35,#36); +#35 = CARTESIAN_POINT('',(-0.85,-1.65,0.E+000)); +#36 = VECTOR('',#37,1.); +#37 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#38 = ORIENTED_EDGE('',*,*,#39,.T.); +#39 = EDGE_CURVE('',#32,#40,#42,.T.); +#40 = VERTEX_POINT('',#41); +#41 = CARTESIAN_POINT('',(0.85,1.65,0.E+000)); +#42 = LINE('',#43,#44); +#43 = CARTESIAN_POINT('',(0.85,-1.65,0.E+000)); +#44 = VECTOR('',#45,1.); +#45 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#46 = ORIENTED_EDGE('',*,*,#47,.T.); +#47 = EDGE_CURVE('',#40,#48,#50,.T.); +#48 = VERTEX_POINT('',#49); +#49 = CARTESIAN_POINT('',(-0.6,1.65,0.E+000)); +#50 = LINE('',#51,#52); +#51 = CARTESIAN_POINT('',(0.85,1.65,0.E+000)); +#52 = VECTOR('',#53,1.); +#53 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#54 = ORIENTED_EDGE('',*,*,#55,.T.); +#55 = EDGE_CURVE('',#48,#22,#56,.T.); +#56 = LINE('',#57,#58); +#57 = CARTESIAN_POINT('',(-0.6,1.65,0.E+000)); +#58 = VECTOR('',#59,1.); +#59 = DIRECTION('',(-0.707106781187,-0.707106781187,0.E+000)); +#60 = PLANE('',#61); +#61 = AXIS2_PLACEMENT_3D('',#62,#63,#64); +#62 = CARTESIAN_POINT('',(-0.85,1.4,0.E+000)); +#63 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#64 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#65 = ADVANCED_FACE('',(#66),#91,.F.); +#66 = FACE_BOUND('',#67,.F.); +#67 = EDGE_LOOP('',(#68,#76,#84,#90)); +#68 = ORIENTED_EDGE('',*,*,#69,.T.); +#69 = EDGE_CURVE('',#22,#70,#72,.T.); +#70 = VERTEX_POINT('',#71); +#71 = CARTESIAN_POINT('',(-0.85,1.4,2.E-002)); +#72 = LINE('',#73,#74); +#73 = CARTESIAN_POINT('',(-0.85,1.4,0.E+000)); +#74 = VECTOR('',#75,1.); +#75 = DIRECTION('',(0.E+000,0.E+000,1.)); +#76 = ORIENTED_EDGE('',*,*,#77,.T.); +#77 = EDGE_CURVE('',#70,#78,#80,.T.); +#78 = VERTEX_POINT('',#79); +#79 = CARTESIAN_POINT('',(-0.85,-1.65,2.E-002)); +#80 = LINE('',#81,#82); +#81 = CARTESIAN_POINT('',(-0.85,1.4,2.E-002)); +#82 = VECTOR('',#83,1.); +#83 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#84 = ORIENTED_EDGE('',*,*,#85,.F.); +#85 = EDGE_CURVE('',#24,#78,#86,.T.); +#86 = LINE('',#87,#88); +#87 = CARTESIAN_POINT('',(-0.85,-1.65,0.E+000)); +#88 = VECTOR('',#89,1.); +#89 = DIRECTION('',(0.E+000,0.E+000,1.)); +#90 = ORIENTED_EDGE('',*,*,#21,.F.); +#91 = PLANE('',#92); +#92 = AXIS2_PLACEMENT_3D('',#93,#94,#95); +#93 = CARTESIAN_POINT('',(-0.85,1.4,0.E+000)); +#94 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#95 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#96 = ADVANCED_FACE('',(#97),#115,.F.); +#97 = FACE_BOUND('',#98,.F.); +#98 = EDGE_LOOP('',(#99,#100,#108,#114)); +#99 = ORIENTED_EDGE('',*,*,#85,.T.); +#100 = ORIENTED_EDGE('',*,*,#101,.T.); +#101 = EDGE_CURVE('',#78,#102,#104,.T.); +#102 = VERTEX_POINT('',#103); +#103 = CARTESIAN_POINT('',(0.85,-1.65,2.E-002)); +#104 = LINE('',#105,#106); +#105 = CARTESIAN_POINT('',(-0.85,-1.65,2.E-002)); +#106 = VECTOR('',#107,1.); +#107 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#108 = ORIENTED_EDGE('',*,*,#109,.F.); +#109 = EDGE_CURVE('',#32,#102,#110,.T.); +#110 = LINE('',#111,#112); +#111 = CARTESIAN_POINT('',(0.85,-1.65,0.E+000)); +#112 = VECTOR('',#113,1.); +#113 = DIRECTION('',(0.E+000,0.E+000,1.)); +#114 = ORIENTED_EDGE('',*,*,#31,.F.); +#115 = PLANE('',#116); +#116 = AXIS2_PLACEMENT_3D('',#117,#118,#119); +#117 = CARTESIAN_POINT('',(-0.85,-1.65,0.E+000)); +#118 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#119 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#120 = ADVANCED_FACE('',(#121),#139,.F.); +#121 = FACE_BOUND('',#122,.F.); +#122 = EDGE_LOOP('',(#123,#124,#132,#138)); +#123 = ORIENTED_EDGE('',*,*,#109,.T.); +#124 = ORIENTED_EDGE('',*,*,#125,.T.); +#125 = EDGE_CURVE('',#102,#126,#128,.T.); +#126 = VERTEX_POINT('',#127); +#127 = CARTESIAN_POINT('',(0.85,1.65,2.E-002)); +#128 = LINE('',#129,#130); +#129 = CARTESIAN_POINT('',(0.85,-1.65,2.E-002)); +#130 = VECTOR('',#131,1.); +#131 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#132 = ORIENTED_EDGE('',*,*,#133,.F.); +#133 = EDGE_CURVE('',#40,#126,#134,.T.); +#134 = LINE('',#135,#136); +#135 = CARTESIAN_POINT('',(0.85,1.65,0.E+000)); +#136 = VECTOR('',#137,1.); +#137 = DIRECTION('',(0.E+000,0.E+000,1.)); +#138 = ORIENTED_EDGE('',*,*,#39,.F.); +#139 = PLANE('',#140); +#140 = AXIS2_PLACEMENT_3D('',#141,#142,#143); +#141 = CARTESIAN_POINT('',(0.85,-1.65,0.E+000)); +#142 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#143 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#144 = ADVANCED_FACE('',(#145),#163,.F.); +#145 = FACE_BOUND('',#146,.F.); +#146 = EDGE_LOOP('',(#147,#148,#156,#162)); +#147 = ORIENTED_EDGE('',*,*,#133,.T.); +#148 = ORIENTED_EDGE('',*,*,#149,.T.); +#149 = EDGE_CURVE('',#126,#150,#152,.T.); +#150 = VERTEX_POINT('',#151); +#151 = CARTESIAN_POINT('',(-0.6,1.65,2.E-002)); +#152 = LINE('',#153,#154); +#153 = CARTESIAN_POINT('',(0.85,1.65,2.E-002)); +#154 = VECTOR('',#155,1.); +#155 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#156 = ORIENTED_EDGE('',*,*,#157,.F.); +#157 = EDGE_CURVE('',#48,#150,#158,.T.); +#158 = LINE('',#159,#160); +#159 = CARTESIAN_POINT('',(-0.6,1.65,0.E+000)); +#160 = VECTOR('',#161,1.); +#161 = DIRECTION('',(0.E+000,0.E+000,1.)); +#162 = ORIENTED_EDGE('',*,*,#47,.F.); +#163 = PLANE('',#164); +#164 = AXIS2_PLACEMENT_3D('',#165,#166,#167); +#165 = CARTESIAN_POINT('',(0.85,1.65,0.E+000)); +#166 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#167 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#168 = ADVANCED_FACE('',(#169),#180,.F.); +#169 = FACE_BOUND('',#170,.F.); +#170 = EDGE_LOOP('',(#171,#172,#178,#179)); +#171 = ORIENTED_EDGE('',*,*,#157,.T.); +#172 = ORIENTED_EDGE('',*,*,#173,.T.); +#173 = EDGE_CURVE('',#150,#70,#174,.T.); +#174 = LINE('',#175,#176); +#175 = CARTESIAN_POINT('',(-0.6,1.65,2.E-002)); +#176 = VECTOR('',#177,1.); +#177 = DIRECTION('',(-0.707106781187,-0.707106781187,0.E+000)); +#178 = ORIENTED_EDGE('',*,*,#69,.F.); +#179 = ORIENTED_EDGE('',*,*,#55,.F.); +#180 = PLANE('',#181); +#181 = AXIS2_PLACEMENT_3D('',#182,#183,#184); +#182 = CARTESIAN_POINT('',(-0.6,1.65,0.E+000)); +#183 = DIRECTION('',(0.707106781187,-0.707106781187,0.E+000)); +#184 = DIRECTION('',(-0.707106781187,-0.707106781187,0.E+000)); +#185 = ADVANCED_FACE('',(#186,#616),#623,.F.); +#186 = FACE_BOUND('',#187,.F.); +#187 = EDGE_LOOP('',(#188,#198,#206,#214,#222,#231,#239,#247,#255,#264, +#272,#280,#288,#297,#305,#313,#321,#330,#338,#346,#354,#363,#371, +#379,#387,#396,#404,#412,#420,#428,#436,#445,#453,#461,#469,#478, +#486,#494,#502,#511,#519,#527,#535,#544,#552,#560,#568,#577,#585, +#593,#601,#610)); +#188 = ORIENTED_EDGE('',*,*,#189,.F.); +#189 = EDGE_CURVE('',#190,#192,#194,.T.); +#190 = VERTEX_POINT('',#191); +#191 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#192 = VERTEX_POINT('',#193); +#193 = CARTESIAN_POINT('',(1.49,1.375,2.E-002)); +#194 = LINE('',#195,#196); +#195 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#196 = VECTOR('',#197,1.); +#197 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#198 = ORIENTED_EDGE('',*,*,#199,.F.); +#199 = EDGE_CURVE('',#200,#190,#202,.T.); +#200 = VERTEX_POINT('',#201); +#201 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#202 = LINE('',#203,#204); +#203 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#204 = VECTOR('',#205,1.); +#205 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#206 = ORIENTED_EDGE('',*,*,#207,.T.); +#207 = EDGE_CURVE('',#200,#208,#210,.T.); +#208 = VERTEX_POINT('',#209); +#209 = CARTESIAN_POINT('',(-1.49,1.375,2.E-002)); +#210 = LINE('',#211,#212); +#211 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#212 = VECTOR('',#213,1.); +#213 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#214 = ORIENTED_EDGE('',*,*,#215,.T.); +#215 = EDGE_CURVE('',#208,#216,#218,.T.); +#216 = VERTEX_POINT('',#217); +#217 = CARTESIAN_POINT('',(-1.225,1.375,2.E-002)); +#218 = LINE('',#219,#220); +#219 = CARTESIAN_POINT('',(-1.3575,1.375,2.E-002)); +#220 = VECTOR('',#221,1.); +#221 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#222 = ORIENTED_EDGE('',*,*,#223,.T.); +#223 = EDGE_CURVE('',#216,#224,#226,.T.); +#224 = VERTEX_POINT('',#225); +#225 = CARTESIAN_POINT('',(-1.225,1.125,2.E-002)); +#226 = CIRCLE('',#227,0.125); +#227 = AXIS2_PLACEMENT_3D('',#228,#229,#230); +#228 = CARTESIAN_POINT('',(-1.225,1.25,2.E-002)); +#229 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#230 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#231 = ORIENTED_EDGE('',*,*,#232,.T.); +#232 = EDGE_CURVE('',#224,#233,#235,.T.); +#233 = VERTEX_POINT('',#234); +#234 = CARTESIAN_POINT('',(-1.49,1.125,2.E-002)); +#235 = LINE('',#236,#237); +#236 = CARTESIAN_POINT('',(-1.495,1.125,2.E-002)); +#237 = VECTOR('',#238,1.); +#238 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#239 = ORIENTED_EDGE('',*,*,#240,.T.); +#240 = EDGE_CURVE('',#233,#241,#243,.T.); +#241 = VERTEX_POINT('',#242); +#242 = CARTESIAN_POINT('',(-1.49,0.875,2.E-002)); +#243 = LINE('',#244,#245); +#244 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#245 = VECTOR('',#246,1.); +#246 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#247 = ORIENTED_EDGE('',*,*,#248,.T.); +#248 = EDGE_CURVE('',#241,#249,#251,.T.); +#249 = VERTEX_POINT('',#250); +#250 = CARTESIAN_POINT('',(-1.225,0.875,2.E-002)); +#251 = LINE('',#252,#253); +#252 = CARTESIAN_POINT('',(-1.3575,0.875,2.E-002)); +#253 = VECTOR('',#254,1.); +#254 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#255 = ORIENTED_EDGE('',*,*,#256,.T.); +#256 = EDGE_CURVE('',#249,#257,#259,.T.); +#257 = VERTEX_POINT('',#258); +#258 = CARTESIAN_POINT('',(-1.225,0.625,2.E-002)); +#259 = CIRCLE('',#260,0.125); +#260 = AXIS2_PLACEMENT_3D('',#261,#262,#263); +#261 = CARTESIAN_POINT('',(-1.225,0.75,2.E-002)); +#262 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#263 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#264 = ORIENTED_EDGE('',*,*,#265,.T.); +#265 = EDGE_CURVE('',#257,#266,#268,.T.); +#266 = VERTEX_POINT('',#267); +#267 = CARTESIAN_POINT('',(-1.49,0.625,2.E-002)); +#268 = LINE('',#269,#270); +#269 = CARTESIAN_POINT('',(-1.495,0.625,2.E-002)); +#270 = VECTOR('',#271,1.); +#271 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#272 = ORIENTED_EDGE('',*,*,#273,.T.); +#273 = EDGE_CURVE('',#266,#274,#276,.T.); +#274 = VERTEX_POINT('',#275); +#275 = CARTESIAN_POINT('',(-1.49,0.375,2.E-002)); +#276 = LINE('',#277,#278); +#277 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#278 = VECTOR('',#279,1.); +#279 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#280 = ORIENTED_EDGE('',*,*,#281,.T.); +#281 = EDGE_CURVE('',#274,#282,#284,.T.); +#282 = VERTEX_POINT('',#283); +#283 = CARTESIAN_POINT('',(-1.225,0.375,2.E-002)); +#284 = LINE('',#285,#286); +#285 = CARTESIAN_POINT('',(-1.3575,0.375,2.E-002)); +#286 = VECTOR('',#287,1.); +#287 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#288 = ORIENTED_EDGE('',*,*,#289,.T.); +#289 = EDGE_CURVE('',#282,#290,#292,.T.); +#290 = VERTEX_POINT('',#291); +#291 = CARTESIAN_POINT('',(-1.225,0.125,2.E-002)); +#292 = CIRCLE('',#293,0.125); +#293 = AXIS2_PLACEMENT_3D('',#294,#295,#296); +#294 = CARTESIAN_POINT('',(-1.225,0.25,2.E-002)); +#295 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#296 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#297 = ORIENTED_EDGE('',*,*,#298,.T.); +#298 = EDGE_CURVE('',#290,#299,#301,.T.); +#299 = VERTEX_POINT('',#300); +#300 = CARTESIAN_POINT('',(-1.49,0.125,2.E-002)); +#301 = LINE('',#302,#303); +#302 = CARTESIAN_POINT('',(-1.495,0.125,2.E-002)); +#303 = VECTOR('',#304,1.); +#304 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#305 = ORIENTED_EDGE('',*,*,#306,.T.); +#306 = EDGE_CURVE('',#299,#307,#309,.T.); +#307 = VERTEX_POINT('',#308); +#308 = CARTESIAN_POINT('',(-1.49,-0.125,2.E-002)); +#309 = LINE('',#310,#311); +#310 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#311 = VECTOR('',#312,1.); +#312 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#313 = ORIENTED_EDGE('',*,*,#314,.T.); +#314 = EDGE_CURVE('',#307,#315,#317,.T.); +#315 = VERTEX_POINT('',#316); +#316 = CARTESIAN_POINT('',(-1.225,-0.125,2.E-002)); +#317 = LINE('',#318,#319); +#318 = CARTESIAN_POINT('',(-1.3575,-0.125,2.E-002)); +#319 = VECTOR('',#320,1.); +#320 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#321 = ORIENTED_EDGE('',*,*,#322,.T.); +#322 = EDGE_CURVE('',#315,#323,#325,.T.); +#323 = VERTEX_POINT('',#324); +#324 = CARTESIAN_POINT('',(-1.225,-0.375,2.E-002)); +#325 = CIRCLE('',#326,0.125); +#326 = AXIS2_PLACEMENT_3D('',#327,#328,#329); +#327 = CARTESIAN_POINT('',(-1.225,-0.25,2.E-002)); +#328 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#329 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#330 = ORIENTED_EDGE('',*,*,#331,.T.); +#331 = EDGE_CURVE('',#323,#332,#334,.T.); +#332 = VERTEX_POINT('',#333); +#333 = CARTESIAN_POINT('',(-1.49,-0.375,2.E-002)); +#334 = LINE('',#335,#336); +#335 = CARTESIAN_POINT('',(-1.495,-0.375,2.E-002)); +#336 = VECTOR('',#337,1.); +#337 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#338 = ORIENTED_EDGE('',*,*,#339,.T.); +#339 = EDGE_CURVE('',#332,#340,#342,.T.); +#340 = VERTEX_POINT('',#341); +#341 = CARTESIAN_POINT('',(-1.49,-0.625,2.E-002)); +#342 = LINE('',#343,#344); +#343 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#344 = VECTOR('',#345,1.); +#345 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#346 = ORIENTED_EDGE('',*,*,#347,.T.); +#347 = EDGE_CURVE('',#340,#348,#350,.T.); +#348 = VERTEX_POINT('',#349); +#349 = CARTESIAN_POINT('',(-1.225,-0.625,2.E-002)); +#350 = LINE('',#351,#352); +#351 = CARTESIAN_POINT('',(-1.3575,-0.625,2.E-002)); +#352 = VECTOR('',#353,1.); +#353 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#354 = ORIENTED_EDGE('',*,*,#355,.T.); +#355 = EDGE_CURVE('',#348,#356,#358,.T.); +#356 = VERTEX_POINT('',#357); +#357 = CARTESIAN_POINT('',(-1.225,-0.875,2.E-002)); +#358 = CIRCLE('',#359,0.125); +#359 = AXIS2_PLACEMENT_3D('',#360,#361,#362); +#360 = CARTESIAN_POINT('',(-1.225,-0.75,2.E-002)); +#361 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#362 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#363 = ORIENTED_EDGE('',*,*,#364,.T.); +#364 = EDGE_CURVE('',#356,#365,#367,.T.); +#365 = VERTEX_POINT('',#366); +#366 = CARTESIAN_POINT('',(-1.49,-0.875,2.E-002)); +#367 = LINE('',#368,#369); +#368 = CARTESIAN_POINT('',(-1.495,-0.875,2.E-002)); +#369 = VECTOR('',#370,1.); +#370 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#371 = ORIENTED_EDGE('',*,*,#372,.T.); +#372 = EDGE_CURVE('',#365,#373,#375,.T.); +#373 = VERTEX_POINT('',#374); +#374 = CARTESIAN_POINT('',(-1.49,-1.125,2.E-002)); +#375 = LINE('',#376,#377); +#376 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#377 = VECTOR('',#378,1.); +#378 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#379 = ORIENTED_EDGE('',*,*,#380,.T.); +#380 = EDGE_CURVE('',#373,#381,#383,.T.); +#381 = VERTEX_POINT('',#382); +#382 = CARTESIAN_POINT('',(-1.225,-1.125,2.E-002)); +#383 = LINE('',#384,#385); +#384 = CARTESIAN_POINT('',(-1.3575,-1.125,2.E-002)); +#385 = VECTOR('',#386,1.); +#386 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#387 = ORIENTED_EDGE('',*,*,#388,.T.); +#388 = EDGE_CURVE('',#381,#389,#391,.T.); +#389 = VERTEX_POINT('',#390); +#390 = CARTESIAN_POINT('',(-1.225,-1.375,2.E-002)); +#391 = CIRCLE('',#392,0.125); +#392 = AXIS2_PLACEMENT_3D('',#393,#394,#395); +#393 = CARTESIAN_POINT('',(-1.225,-1.25,2.E-002)); +#394 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#395 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#396 = ORIENTED_EDGE('',*,*,#397,.T.); +#397 = EDGE_CURVE('',#389,#398,#400,.T.); +#398 = VERTEX_POINT('',#399); +#399 = CARTESIAN_POINT('',(-1.49,-1.375,2.E-002)); +#400 = LINE('',#401,#402); +#401 = CARTESIAN_POINT('',(-1.495,-1.375,2.E-002)); +#402 = VECTOR('',#403,1.); +#403 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#404 = ORIENTED_EDGE('',*,*,#405,.T.); +#405 = EDGE_CURVE('',#398,#406,#408,.T.); +#406 = VERTEX_POINT('',#407); +#407 = CARTESIAN_POINT('',(-1.49,-1.99,2.E-002)); +#408 = LINE('',#409,#410); +#409 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#410 = VECTOR('',#411,1.); +#411 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#412 = ORIENTED_EDGE('',*,*,#413,.T.); +#413 = EDGE_CURVE('',#406,#414,#416,.T.); +#414 = VERTEX_POINT('',#415); +#415 = CARTESIAN_POINT('',(1.49,-1.99,2.E-002)); +#416 = LINE('',#417,#418); +#417 = CARTESIAN_POINT('',(-1.49,-1.99,2.E-002)); +#418 = VECTOR('',#419,1.); +#419 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#420 = ORIENTED_EDGE('',*,*,#421,.F.); +#421 = EDGE_CURVE('',#422,#414,#424,.T.); +#422 = VERTEX_POINT('',#423); +#423 = CARTESIAN_POINT('',(1.49,-1.375,2.E-002)); +#424 = LINE('',#425,#426); +#425 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#426 = VECTOR('',#427,1.); +#427 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#428 = ORIENTED_EDGE('',*,*,#429,.T.); +#429 = EDGE_CURVE('',#422,#430,#432,.T.); +#430 = VERTEX_POINT('',#431); +#431 = CARTESIAN_POINT('',(1.225,-1.375,2.E-002)); +#432 = LINE('',#433,#434); +#433 = CARTESIAN_POINT('',(-0.1325,-1.375,2.E-002)); +#434 = VECTOR('',#435,1.); +#435 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#436 = ORIENTED_EDGE('',*,*,#437,.T.); +#437 = EDGE_CURVE('',#430,#438,#440,.T.); +#438 = VERTEX_POINT('',#439); +#439 = CARTESIAN_POINT('',(1.225,-1.125,2.E-002)); +#440 = CIRCLE('',#441,0.125); +#441 = AXIS2_PLACEMENT_3D('',#442,#443,#444); +#442 = CARTESIAN_POINT('',(1.225,-1.25,2.E-002)); +#443 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#444 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#445 = ORIENTED_EDGE('',*,*,#446,.T.); +#446 = EDGE_CURVE('',#438,#447,#449,.T.); +#447 = VERTEX_POINT('',#448); +#448 = CARTESIAN_POINT('',(1.49,-1.125,2.E-002)); +#449 = LINE('',#450,#451); +#450 = CARTESIAN_POINT('',(5.E-003,-1.125,2.E-002)); +#451 = VECTOR('',#452,1.); +#452 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#453 = ORIENTED_EDGE('',*,*,#454,.F.); +#454 = EDGE_CURVE('',#455,#447,#457,.T.); +#455 = VERTEX_POINT('',#456); +#456 = CARTESIAN_POINT('',(1.49,-0.875,2.E-002)); +#457 = LINE('',#458,#459); +#458 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#459 = VECTOR('',#460,1.); +#460 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#461 = ORIENTED_EDGE('',*,*,#462,.T.); +#462 = EDGE_CURVE('',#455,#463,#465,.T.); +#463 = VERTEX_POINT('',#464); +#464 = CARTESIAN_POINT('',(1.225,-0.875,2.E-002)); +#465 = LINE('',#466,#467); +#466 = CARTESIAN_POINT('',(-0.1325,-0.875,2.E-002)); +#467 = VECTOR('',#468,1.); +#468 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#469 = ORIENTED_EDGE('',*,*,#470,.T.); +#470 = EDGE_CURVE('',#463,#471,#473,.T.); +#471 = VERTEX_POINT('',#472); +#472 = CARTESIAN_POINT('',(1.225,-0.625,2.E-002)); +#473 = CIRCLE('',#474,0.125); +#474 = AXIS2_PLACEMENT_3D('',#475,#476,#477); +#475 = CARTESIAN_POINT('',(1.225,-0.75,2.E-002)); +#476 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#477 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#478 = ORIENTED_EDGE('',*,*,#479,.T.); +#479 = EDGE_CURVE('',#471,#480,#482,.T.); +#480 = VERTEX_POINT('',#481); +#481 = CARTESIAN_POINT('',(1.49,-0.625,2.E-002)); +#482 = LINE('',#483,#484); +#483 = CARTESIAN_POINT('',(5.E-003,-0.625,2.E-002)); +#484 = VECTOR('',#485,1.); +#485 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#486 = ORIENTED_EDGE('',*,*,#487,.F.); +#487 = EDGE_CURVE('',#488,#480,#490,.T.); +#488 = VERTEX_POINT('',#489); +#489 = CARTESIAN_POINT('',(1.49,-0.375,2.E-002)); +#490 = LINE('',#491,#492); +#491 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#492 = VECTOR('',#493,1.); +#493 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#494 = ORIENTED_EDGE('',*,*,#495,.T.); +#495 = EDGE_CURVE('',#488,#496,#498,.T.); +#496 = VERTEX_POINT('',#497); +#497 = CARTESIAN_POINT('',(1.225,-0.375,2.E-002)); +#498 = LINE('',#499,#500); +#499 = CARTESIAN_POINT('',(-0.1325,-0.375,2.E-002)); +#500 = VECTOR('',#501,1.); +#501 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#502 = ORIENTED_EDGE('',*,*,#503,.T.); +#503 = EDGE_CURVE('',#496,#504,#506,.T.); +#504 = VERTEX_POINT('',#505); +#505 = CARTESIAN_POINT('',(1.225,-0.125,2.E-002)); +#506 = CIRCLE('',#507,0.125); +#507 = AXIS2_PLACEMENT_3D('',#508,#509,#510); +#508 = CARTESIAN_POINT('',(1.225,-0.25,2.E-002)); +#509 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#510 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#511 = ORIENTED_EDGE('',*,*,#512,.T.); +#512 = EDGE_CURVE('',#504,#513,#515,.T.); +#513 = VERTEX_POINT('',#514); +#514 = CARTESIAN_POINT('',(1.49,-0.125,2.E-002)); +#515 = LINE('',#516,#517); +#516 = CARTESIAN_POINT('',(5.E-003,-0.125,2.E-002)); +#517 = VECTOR('',#518,1.); +#518 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#519 = ORIENTED_EDGE('',*,*,#520,.F.); +#520 = EDGE_CURVE('',#521,#513,#523,.T.); +#521 = VERTEX_POINT('',#522); +#522 = CARTESIAN_POINT('',(1.49,0.125,2.E-002)); +#523 = LINE('',#524,#525); +#524 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#525 = VECTOR('',#526,1.); +#526 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#527 = ORIENTED_EDGE('',*,*,#528,.T.); +#528 = EDGE_CURVE('',#521,#529,#531,.T.); +#529 = VERTEX_POINT('',#530); +#530 = CARTESIAN_POINT('',(1.225,0.125,2.E-002)); +#531 = LINE('',#532,#533); +#532 = CARTESIAN_POINT('',(-0.1325,0.125,2.E-002)); +#533 = VECTOR('',#534,1.); +#534 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#535 = ORIENTED_EDGE('',*,*,#536,.T.); +#536 = EDGE_CURVE('',#529,#537,#539,.T.); +#537 = VERTEX_POINT('',#538); +#538 = CARTESIAN_POINT('',(1.225,0.375,2.E-002)); +#539 = CIRCLE('',#540,0.125); +#540 = AXIS2_PLACEMENT_3D('',#541,#542,#543); +#541 = CARTESIAN_POINT('',(1.225,0.25,2.E-002)); +#542 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#543 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#544 = ORIENTED_EDGE('',*,*,#545,.T.); +#545 = EDGE_CURVE('',#537,#546,#548,.T.); +#546 = VERTEX_POINT('',#547); +#547 = CARTESIAN_POINT('',(1.49,0.375,2.E-002)); +#548 = LINE('',#549,#550); +#549 = CARTESIAN_POINT('',(5.E-003,0.375,2.E-002)); +#550 = VECTOR('',#551,1.); +#551 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#552 = ORIENTED_EDGE('',*,*,#553,.F.); +#553 = EDGE_CURVE('',#554,#546,#556,.T.); +#554 = VERTEX_POINT('',#555); +#555 = CARTESIAN_POINT('',(1.49,0.625,2.E-002)); +#556 = LINE('',#557,#558); +#557 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#558 = VECTOR('',#559,1.); +#559 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#560 = ORIENTED_EDGE('',*,*,#561,.T.); +#561 = EDGE_CURVE('',#554,#562,#564,.T.); +#562 = VERTEX_POINT('',#563); +#563 = CARTESIAN_POINT('',(1.225,0.625,2.E-002)); +#564 = LINE('',#565,#566); +#565 = CARTESIAN_POINT('',(-0.1325,0.625,2.E-002)); +#566 = VECTOR('',#567,1.); +#567 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#568 = ORIENTED_EDGE('',*,*,#569,.T.); +#569 = EDGE_CURVE('',#562,#570,#572,.T.); +#570 = VERTEX_POINT('',#571); +#571 = CARTESIAN_POINT('',(1.225,0.875,2.E-002)); +#572 = CIRCLE('',#573,0.125); +#573 = AXIS2_PLACEMENT_3D('',#574,#575,#576); +#574 = CARTESIAN_POINT('',(1.225,0.75,2.E-002)); +#575 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#576 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#577 = ORIENTED_EDGE('',*,*,#578,.T.); +#578 = EDGE_CURVE('',#570,#579,#581,.T.); +#579 = VERTEX_POINT('',#580); +#580 = CARTESIAN_POINT('',(1.49,0.875,2.E-002)); +#581 = LINE('',#582,#583); +#582 = CARTESIAN_POINT('',(5.E-003,0.875,2.E-002)); +#583 = VECTOR('',#584,1.); +#584 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#585 = ORIENTED_EDGE('',*,*,#586,.F.); +#586 = EDGE_CURVE('',#587,#579,#589,.T.); +#587 = VERTEX_POINT('',#588); +#588 = CARTESIAN_POINT('',(1.49,1.125,2.E-002)); +#589 = LINE('',#590,#591); +#590 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#591 = VECTOR('',#592,1.); +#592 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#593 = ORIENTED_EDGE('',*,*,#594,.T.); +#594 = EDGE_CURVE('',#587,#595,#597,.T.); +#595 = VERTEX_POINT('',#596); +#596 = CARTESIAN_POINT('',(1.225,1.125,2.E-002)); +#597 = LINE('',#598,#599); +#598 = CARTESIAN_POINT('',(-0.1325,1.125,2.E-002)); +#599 = VECTOR('',#600,1.); +#600 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#601 = ORIENTED_EDGE('',*,*,#602,.T.); +#602 = EDGE_CURVE('',#595,#603,#605,.T.); +#603 = VERTEX_POINT('',#604); +#604 = CARTESIAN_POINT('',(1.225,1.375,2.E-002)); +#605 = CIRCLE('',#606,0.125); +#606 = AXIS2_PLACEMENT_3D('',#607,#608,#609); +#607 = CARTESIAN_POINT('',(1.225,1.25,2.E-002)); +#608 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#609 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#610 = ORIENTED_EDGE('',*,*,#611,.T.); +#611 = EDGE_CURVE('',#603,#192,#612,.T.); +#612 = LINE('',#613,#614); +#613 = CARTESIAN_POINT('',(5.E-003,1.375,2.E-002)); +#614 = VECTOR('',#615,1.); +#615 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#616 = FACE_BOUND('',#617,.F.); +#617 = EDGE_LOOP('',(#618,#619,#620,#621,#622)); +#618 = ORIENTED_EDGE('',*,*,#77,.F.); +#619 = ORIENTED_EDGE('',*,*,#173,.F.); +#620 = ORIENTED_EDGE('',*,*,#149,.F.); +#621 = ORIENTED_EDGE('',*,*,#125,.F.); +#622 = ORIENTED_EDGE('',*,*,#101,.F.); +#623 = PLANE('',#624); +#624 = AXIS2_PLACEMENT_3D('',#625,#626,#627); +#625 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#626 = DIRECTION('',(0.E+000,0.E+000,1.)); +#627 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#628 = ADVANCED_FACE('',(#629),#792,.T.); +#629 = FACE_BOUND('',#630,.T.); +#630 = EDGE_LOOP('',(#631,#632,#640,#648,#654,#655,#663,#671,#677,#678, +#686,#694,#700,#701,#709,#717,#723,#724,#732,#740,#746,#747,#755, +#763,#769,#770,#778,#786)); +#631 = ORIENTED_EDGE('',*,*,#189,.F.); +#632 = ORIENTED_EDGE('',*,*,#633,.T.); +#633 = EDGE_CURVE('',#190,#634,#636,.T.); +#634 = VERTEX_POINT('',#635); +#635 = CARTESIAN_POINT('',(1.49,1.99,0.77)); +#636 = LINE('',#637,#638); +#637 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#638 = VECTOR('',#639,1.); +#639 = DIRECTION('',(0.E+000,0.E+000,1.)); +#640 = ORIENTED_EDGE('',*,*,#641,.T.); +#641 = EDGE_CURVE('',#634,#642,#644,.T.); +#642 = VERTEX_POINT('',#643); +#643 = CARTESIAN_POINT('',(1.49,-1.99,0.77)); +#644 = LINE('',#645,#646); +#645 = CARTESIAN_POINT('',(1.49,1.99,0.77)); +#646 = VECTOR('',#647,1.); +#647 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#648 = ORIENTED_EDGE('',*,*,#649,.F.); +#649 = EDGE_CURVE('',#414,#642,#650,.T.); +#650 = LINE('',#651,#652); +#651 = CARTESIAN_POINT('',(1.49,-1.99,2.E-002)); +#652 = VECTOR('',#653,1.); +#653 = DIRECTION('',(0.E+000,0.E+000,1.)); +#654 = ORIENTED_EDGE('',*,*,#421,.F.); +#655 = ORIENTED_EDGE('',*,*,#656,.T.); +#656 = EDGE_CURVE('',#422,#657,#659,.T.); +#657 = VERTEX_POINT('',#658); +#658 = CARTESIAN_POINT('',(1.49,-1.375,0.2)); +#659 = LINE('',#660,#661); +#660 = CARTESIAN_POINT('',(1.49,-1.375,1.E-002)); +#661 = VECTOR('',#662,1.); +#662 = DIRECTION('',(0.E+000,0.E+000,1.)); +#663 = ORIENTED_EDGE('',*,*,#664,.T.); +#664 = EDGE_CURVE('',#657,#665,#667,.T.); +#665 = VERTEX_POINT('',#666); +#666 = CARTESIAN_POINT('',(1.49,-1.125,0.2)); +#667 = LINE('',#668,#669); +#668 = CARTESIAN_POINT('',(1.49,0.4325,0.2)); +#669 = VECTOR('',#670,1.); +#670 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#671 = ORIENTED_EDGE('',*,*,#672,.T.); +#672 = EDGE_CURVE('',#665,#447,#673,.T.); +#673 = LINE('',#674,#675); +#674 = CARTESIAN_POINT('',(1.49,-1.125,1.E-002)); +#675 = VECTOR('',#676,1.); +#676 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#677 = ORIENTED_EDGE('',*,*,#454,.F.); +#678 = ORIENTED_EDGE('',*,*,#679,.T.); +#679 = EDGE_CURVE('',#455,#680,#682,.T.); +#680 = VERTEX_POINT('',#681); +#681 = CARTESIAN_POINT('',(1.49,-0.875,0.2)); +#682 = LINE('',#683,#684); +#683 = CARTESIAN_POINT('',(1.49,-0.875,1.E-002)); +#684 = VECTOR('',#685,1.); +#685 = DIRECTION('',(0.E+000,0.E+000,1.)); +#686 = ORIENTED_EDGE('',*,*,#687,.T.); +#687 = EDGE_CURVE('',#680,#688,#690,.T.); +#688 = VERTEX_POINT('',#689); +#689 = CARTESIAN_POINT('',(1.49,-0.625,0.2)); +#690 = LINE('',#691,#692); +#691 = CARTESIAN_POINT('',(1.49,0.6825,0.2)); +#692 = VECTOR('',#693,1.); +#693 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#694 = ORIENTED_EDGE('',*,*,#695,.T.); +#695 = EDGE_CURVE('',#688,#480,#696,.T.); +#696 = LINE('',#697,#698); +#697 = CARTESIAN_POINT('',(1.49,-0.625,1.E-002)); +#698 = VECTOR('',#699,1.); +#699 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#700 = ORIENTED_EDGE('',*,*,#487,.F.); +#701 = ORIENTED_EDGE('',*,*,#702,.T.); +#702 = EDGE_CURVE('',#488,#703,#705,.T.); +#703 = VERTEX_POINT('',#704); +#704 = CARTESIAN_POINT('',(1.49,-0.375,0.2)); +#705 = LINE('',#706,#707); +#706 = CARTESIAN_POINT('',(1.49,-0.375,1.E-002)); +#707 = VECTOR('',#708,1.); +#708 = DIRECTION('',(0.E+000,0.E+000,1.)); +#709 = ORIENTED_EDGE('',*,*,#710,.T.); +#710 = EDGE_CURVE('',#703,#711,#713,.T.); +#711 = VERTEX_POINT('',#712); +#712 = CARTESIAN_POINT('',(1.49,-0.125,0.2)); +#713 = LINE('',#714,#715); +#714 = CARTESIAN_POINT('',(1.49,0.9325,0.2)); +#715 = VECTOR('',#716,1.); +#716 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#717 = ORIENTED_EDGE('',*,*,#718,.T.); +#718 = EDGE_CURVE('',#711,#513,#719,.T.); +#719 = LINE('',#720,#721); +#720 = CARTESIAN_POINT('',(1.49,-0.125,1.E-002)); +#721 = VECTOR('',#722,1.); +#722 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#723 = ORIENTED_EDGE('',*,*,#520,.F.); +#724 = ORIENTED_EDGE('',*,*,#725,.T.); +#725 = EDGE_CURVE('',#521,#726,#728,.T.); +#726 = VERTEX_POINT('',#727); +#727 = CARTESIAN_POINT('',(1.49,0.125,0.2)); +#728 = LINE('',#729,#730); +#729 = CARTESIAN_POINT('',(1.49,0.125,1.E-002)); +#730 = VECTOR('',#731,1.); +#731 = DIRECTION('',(0.E+000,0.E+000,1.)); +#732 = ORIENTED_EDGE('',*,*,#733,.T.); +#733 = EDGE_CURVE('',#726,#734,#736,.T.); +#734 = VERTEX_POINT('',#735); +#735 = CARTESIAN_POINT('',(1.49,0.375,0.2)); +#736 = LINE('',#737,#738); +#737 = CARTESIAN_POINT('',(1.49,1.1825,0.2)); +#738 = VECTOR('',#739,1.); +#739 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#740 = ORIENTED_EDGE('',*,*,#741,.T.); +#741 = EDGE_CURVE('',#734,#546,#742,.T.); +#742 = LINE('',#743,#744); +#743 = CARTESIAN_POINT('',(1.49,0.375,1.E-002)); +#744 = VECTOR('',#745,1.); +#745 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#746 = ORIENTED_EDGE('',*,*,#553,.F.); +#747 = ORIENTED_EDGE('',*,*,#748,.T.); +#748 = EDGE_CURVE('',#554,#749,#751,.T.); +#749 = VERTEX_POINT('',#750); +#750 = CARTESIAN_POINT('',(1.49,0.625,0.2)); +#751 = LINE('',#752,#753); +#752 = CARTESIAN_POINT('',(1.49,0.625,1.E-002)); +#753 = VECTOR('',#754,1.); +#754 = DIRECTION('',(0.E+000,0.E+000,1.)); +#755 = ORIENTED_EDGE('',*,*,#756,.T.); +#756 = EDGE_CURVE('',#749,#757,#759,.T.); +#757 = VERTEX_POINT('',#758); +#758 = CARTESIAN_POINT('',(1.49,0.875,0.2)); +#759 = LINE('',#760,#761); +#760 = CARTESIAN_POINT('',(1.49,1.4325,0.2)); +#761 = VECTOR('',#762,1.); +#762 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#763 = ORIENTED_EDGE('',*,*,#764,.T.); +#764 = EDGE_CURVE('',#757,#579,#765,.T.); +#765 = LINE('',#766,#767); +#766 = CARTESIAN_POINT('',(1.49,0.875,1.E-002)); +#767 = VECTOR('',#768,1.); +#768 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#769 = ORIENTED_EDGE('',*,*,#586,.F.); +#770 = ORIENTED_EDGE('',*,*,#771,.T.); +#771 = EDGE_CURVE('',#587,#772,#774,.T.); +#772 = VERTEX_POINT('',#773); +#773 = CARTESIAN_POINT('',(1.49,1.125,0.2)); +#774 = LINE('',#775,#776); +#775 = CARTESIAN_POINT('',(1.49,1.125,1.E-002)); +#776 = VECTOR('',#777,1.); +#777 = DIRECTION('',(0.E+000,0.E+000,1.)); +#778 = ORIENTED_EDGE('',*,*,#779,.T.); +#779 = EDGE_CURVE('',#772,#780,#782,.T.); +#780 = VERTEX_POINT('',#781); +#781 = CARTESIAN_POINT('',(1.49,1.375,0.2)); +#782 = LINE('',#783,#784); +#783 = CARTESIAN_POINT('',(1.49,1.6825,0.2)); +#784 = VECTOR('',#785,1.); +#785 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#786 = ORIENTED_EDGE('',*,*,#787,.T.); +#787 = EDGE_CURVE('',#780,#192,#788,.T.); +#788 = LINE('',#789,#790); +#789 = CARTESIAN_POINT('',(1.49,1.375,1.E-002)); +#790 = VECTOR('',#791,1.); +#791 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#792 = PLANE('',#793); +#793 = AXIS2_PLACEMENT_3D('',#794,#795,#796); +#794 = CARTESIAN_POINT('',(1.49,1.99,2.E-002)); +#795 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#796 = DIRECTION('',(0.E+000,0.E+000,1.)); +#797 = ADVANCED_FACE('',(#798),#816,.F.); +#798 = FACE_BOUND('',#799,.F.); +#799 = EDGE_LOOP('',(#800,#808,#809,#810)); +#800 = ORIENTED_EDGE('',*,*,#801,.F.); +#801 = EDGE_CURVE('',#200,#802,#804,.T.); +#802 = VERTEX_POINT('',#803); +#803 = CARTESIAN_POINT('',(-1.49,1.99,0.77)); +#804 = LINE('',#805,#806); +#805 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#806 = VECTOR('',#807,1.); +#807 = DIRECTION('',(0.E+000,0.E+000,1.)); +#808 = ORIENTED_EDGE('',*,*,#199,.T.); +#809 = ORIENTED_EDGE('',*,*,#633,.T.); +#810 = ORIENTED_EDGE('',*,*,#811,.F.); +#811 = EDGE_CURVE('',#802,#634,#812,.T.); +#812 = LINE('',#813,#814); +#813 = CARTESIAN_POINT('',(-1.49,1.99,0.77)); +#814 = VECTOR('',#815,1.); +#815 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#816 = PLANE('',#817); +#817 = AXIS2_PLACEMENT_3D('',#818,#819,#820); +#818 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#819 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#820 = DIRECTION('',(0.E+000,0.E+000,1.)); +#821 = ADVANCED_FACE('',(#822),#856,.F.); +#822 = FACE_BOUND('',#823,.F.); +#823 = EDGE_LOOP('',(#824,#834,#842,#848,#849,#850)); +#824 = ORIENTED_EDGE('',*,*,#825,.F.); +#825 = EDGE_CURVE('',#826,#828,#830,.T.); +#826 = VERTEX_POINT('',#827); +#827 = CARTESIAN_POINT('',(1.5,1.375,0.E+000)); +#828 = VERTEX_POINT('',#829); +#829 = CARTESIAN_POINT('',(1.225,1.375,0.E+000)); +#830 = LINE('',#831,#832); +#831 = CARTESIAN_POINT('',(1.5,1.375,0.E+000)); +#832 = VECTOR('',#833,1.); +#833 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#834 = ORIENTED_EDGE('',*,*,#835,.T.); +#835 = EDGE_CURVE('',#826,#836,#838,.T.); +#836 = VERTEX_POINT('',#837); +#837 = CARTESIAN_POINT('',(1.5,1.375,0.2)); +#838 = LINE('',#839,#840); +#839 = CARTESIAN_POINT('',(1.5,1.375,0.E+000)); +#840 = VECTOR('',#841,1.); +#841 = DIRECTION('',(0.E+000,0.E+000,1.)); +#842 = ORIENTED_EDGE('',*,*,#843,.T.); +#843 = EDGE_CURVE('',#836,#780,#844,.T.); +#844 = LINE('',#845,#846); +#845 = CARTESIAN_POINT('',(1.5,1.375,0.2)); +#846 = VECTOR('',#847,1.); +#847 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#848 = ORIENTED_EDGE('',*,*,#787,.T.); +#849 = ORIENTED_EDGE('',*,*,#611,.F.); +#850 = ORIENTED_EDGE('',*,*,#851,.F.); +#851 = EDGE_CURVE('',#828,#603,#852,.T.); +#852 = LINE('',#853,#854); +#853 = CARTESIAN_POINT('',(1.225,1.375,0.E+000)); +#854 = VECTOR('',#855,1.); +#855 = DIRECTION('',(0.E+000,0.E+000,1.)); +#856 = PLANE('',#857); +#857 = AXIS2_PLACEMENT_3D('',#858,#859,#860); +#858 = CARTESIAN_POINT('',(1.5,1.375,0.E+000)); +#859 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#860 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#861 = ADVANCED_FACE('',(#862),#1018,.F.); +#862 = FACE_BOUND('',#863,.F.); +#863 = EDGE_LOOP('',(#864,#865,#866,#874,#880,#881,#889,#897,#903,#904, +#912,#920,#926,#927,#935,#943,#949,#950,#958,#966,#972,#973,#981, +#989,#995,#996,#1004,#1012)); +#864 = ORIENTED_EDGE('',*,*,#207,.F.); +#865 = ORIENTED_EDGE('',*,*,#801,.T.); +#866 = ORIENTED_EDGE('',*,*,#867,.T.); +#867 = EDGE_CURVE('',#802,#868,#870,.T.); +#868 = VERTEX_POINT('',#869); +#869 = CARTESIAN_POINT('',(-1.49,-1.99,0.77)); +#870 = LINE('',#871,#872); +#871 = CARTESIAN_POINT('',(-1.49,1.99,0.77)); +#872 = VECTOR('',#873,1.); +#873 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#874 = ORIENTED_EDGE('',*,*,#875,.F.); +#875 = EDGE_CURVE('',#406,#868,#876,.T.); +#876 = LINE('',#877,#878); +#877 = CARTESIAN_POINT('',(-1.49,-1.99,2.E-002)); +#878 = VECTOR('',#879,1.); +#879 = DIRECTION('',(0.E+000,0.E+000,1.)); +#880 = ORIENTED_EDGE('',*,*,#405,.F.); +#881 = ORIENTED_EDGE('',*,*,#882,.T.); +#882 = EDGE_CURVE('',#398,#883,#885,.T.); +#883 = VERTEX_POINT('',#884); +#884 = CARTESIAN_POINT('',(-1.49,-1.375,0.2)); +#885 = LINE('',#886,#887); +#886 = CARTESIAN_POINT('',(-1.49,-1.375,1.E-002)); +#887 = VECTOR('',#888,1.); +#888 = DIRECTION('',(0.E+000,0.E+000,1.)); +#889 = ORIENTED_EDGE('',*,*,#890,.T.); +#890 = EDGE_CURVE('',#883,#891,#893,.T.); +#891 = VERTEX_POINT('',#892); +#892 = CARTESIAN_POINT('',(-1.49,-1.125,0.2)); +#893 = LINE('',#894,#895); +#894 = CARTESIAN_POINT('',(-1.49,0.3075,0.2)); +#895 = VECTOR('',#896,1.); +#896 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#897 = ORIENTED_EDGE('',*,*,#898,.T.); +#898 = EDGE_CURVE('',#891,#373,#899,.T.); +#899 = LINE('',#900,#901); +#900 = CARTESIAN_POINT('',(-1.49,-1.125,1.E-002)); +#901 = VECTOR('',#902,1.); +#902 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#903 = ORIENTED_EDGE('',*,*,#372,.F.); +#904 = ORIENTED_EDGE('',*,*,#905,.T.); +#905 = EDGE_CURVE('',#365,#906,#908,.T.); +#906 = VERTEX_POINT('',#907); +#907 = CARTESIAN_POINT('',(-1.49,-0.875,0.2)); +#908 = LINE('',#909,#910); +#909 = CARTESIAN_POINT('',(-1.49,-0.875,1.E-002)); +#910 = VECTOR('',#911,1.); +#911 = DIRECTION('',(0.E+000,0.E+000,1.)); +#912 = ORIENTED_EDGE('',*,*,#913,.T.); +#913 = EDGE_CURVE('',#906,#914,#916,.T.); +#914 = VERTEX_POINT('',#915); +#915 = CARTESIAN_POINT('',(-1.49,-0.625,0.2)); +#916 = LINE('',#917,#918); +#917 = CARTESIAN_POINT('',(-1.49,0.5575,0.2)); +#918 = VECTOR('',#919,1.); +#919 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#920 = ORIENTED_EDGE('',*,*,#921,.T.); +#921 = EDGE_CURVE('',#914,#340,#922,.T.); +#922 = LINE('',#923,#924); +#923 = CARTESIAN_POINT('',(-1.49,-0.625,1.E-002)); +#924 = VECTOR('',#925,1.); +#925 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#926 = ORIENTED_EDGE('',*,*,#339,.F.); +#927 = ORIENTED_EDGE('',*,*,#928,.T.); +#928 = EDGE_CURVE('',#332,#929,#931,.T.); +#929 = VERTEX_POINT('',#930); +#930 = CARTESIAN_POINT('',(-1.49,-0.375,0.2)); +#931 = LINE('',#932,#933); +#932 = CARTESIAN_POINT('',(-1.49,-0.375,1.E-002)); +#933 = VECTOR('',#934,1.); +#934 = DIRECTION('',(0.E+000,0.E+000,1.)); +#935 = ORIENTED_EDGE('',*,*,#936,.T.); +#936 = EDGE_CURVE('',#929,#937,#939,.T.); +#937 = VERTEX_POINT('',#938); +#938 = CARTESIAN_POINT('',(-1.49,-0.125,0.2)); +#939 = LINE('',#940,#941); +#940 = CARTESIAN_POINT('',(-1.49,0.8075,0.2)); +#941 = VECTOR('',#942,1.); +#942 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#943 = ORIENTED_EDGE('',*,*,#944,.T.); +#944 = EDGE_CURVE('',#937,#307,#945,.T.); +#945 = LINE('',#946,#947); +#946 = CARTESIAN_POINT('',(-1.49,-0.125,1.E-002)); +#947 = VECTOR('',#948,1.); +#948 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#949 = ORIENTED_EDGE('',*,*,#306,.F.); +#950 = ORIENTED_EDGE('',*,*,#951,.T.); +#951 = EDGE_CURVE('',#299,#952,#954,.T.); +#952 = VERTEX_POINT('',#953); +#953 = CARTESIAN_POINT('',(-1.49,0.125,0.2)); +#954 = LINE('',#955,#956); +#955 = CARTESIAN_POINT('',(-1.49,0.125,1.E-002)); +#956 = VECTOR('',#957,1.); +#957 = DIRECTION('',(0.E+000,0.E+000,1.)); +#958 = ORIENTED_EDGE('',*,*,#959,.T.); +#959 = EDGE_CURVE('',#952,#960,#962,.T.); +#960 = VERTEX_POINT('',#961); +#961 = CARTESIAN_POINT('',(-1.49,0.375,0.2)); +#962 = LINE('',#963,#964); +#963 = CARTESIAN_POINT('',(-1.49,1.0575,0.2)); +#964 = VECTOR('',#965,1.); +#965 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#966 = ORIENTED_EDGE('',*,*,#967,.T.); +#967 = EDGE_CURVE('',#960,#274,#968,.T.); +#968 = LINE('',#969,#970); +#969 = CARTESIAN_POINT('',(-1.49,0.375,1.E-002)); +#970 = VECTOR('',#971,1.); +#971 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#972 = ORIENTED_EDGE('',*,*,#273,.F.); +#973 = ORIENTED_EDGE('',*,*,#974,.T.); +#974 = EDGE_CURVE('',#266,#975,#977,.T.); +#975 = VERTEX_POINT('',#976); +#976 = CARTESIAN_POINT('',(-1.49,0.625,0.2)); +#977 = LINE('',#978,#979); +#978 = CARTESIAN_POINT('',(-1.49,0.625,1.E-002)); +#979 = VECTOR('',#980,1.); +#980 = DIRECTION('',(0.E+000,0.E+000,1.)); +#981 = ORIENTED_EDGE('',*,*,#982,.T.); +#982 = EDGE_CURVE('',#975,#983,#985,.T.); +#983 = VERTEX_POINT('',#984); +#984 = CARTESIAN_POINT('',(-1.49,0.875,0.2)); +#985 = LINE('',#986,#987); +#986 = CARTESIAN_POINT('',(-1.49,1.3075,0.2)); +#987 = VECTOR('',#988,1.); +#988 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#989 = ORIENTED_EDGE('',*,*,#990,.T.); +#990 = EDGE_CURVE('',#983,#241,#991,.T.); +#991 = LINE('',#992,#993); +#992 = CARTESIAN_POINT('',(-1.49,0.875,1.E-002)); +#993 = VECTOR('',#994,1.); +#994 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#995 = ORIENTED_EDGE('',*,*,#240,.F.); +#996 = ORIENTED_EDGE('',*,*,#997,.T.); +#997 = EDGE_CURVE('',#233,#998,#1000,.T.); +#998 = VERTEX_POINT('',#999); +#999 = CARTESIAN_POINT('',(-1.49,1.125,0.2)); +#1000 = LINE('',#1001,#1002); +#1001 = CARTESIAN_POINT('',(-1.49,1.125,1.E-002)); +#1002 = VECTOR('',#1003,1.); +#1003 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1004 = ORIENTED_EDGE('',*,*,#1005,.T.); +#1005 = EDGE_CURVE('',#998,#1006,#1008,.T.); +#1006 = VERTEX_POINT('',#1007); +#1007 = CARTESIAN_POINT('',(-1.49,1.375,0.2)); +#1008 = LINE('',#1009,#1010); +#1009 = CARTESIAN_POINT('',(-1.49,1.5575,0.2)); +#1010 = VECTOR('',#1011,1.); +#1011 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#1012 = ORIENTED_EDGE('',*,*,#1013,.T.); +#1013 = EDGE_CURVE('',#1006,#208,#1014,.T.); +#1014 = LINE('',#1015,#1016); +#1015 = CARTESIAN_POINT('',(-1.49,1.375,1.E-002)); +#1016 = VECTOR('',#1017,1.); +#1017 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1018 = PLANE('',#1019); +#1019 = AXIS2_PLACEMENT_3D('',#1020,#1021,#1022); +#1020 = CARTESIAN_POINT('',(-1.49,1.99,2.E-002)); +#1021 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#1022 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1023 = ADVANCED_FACE('',(#1024),#1043,.T.); +#1024 = FACE_BOUND('',#1025,.F.); +#1025 = EDGE_LOOP('',(#1026,#1035,#1036,#1037)); +#1026 = ORIENTED_EDGE('',*,*,#1027,.F.); +#1027 = EDGE_CURVE('',#828,#1028,#1030,.T.); +#1028 = VERTEX_POINT('',#1029); +#1029 = CARTESIAN_POINT('',(1.225,1.125,0.E+000)); +#1030 = CIRCLE('',#1031,0.125); +#1031 = AXIS2_PLACEMENT_3D('',#1032,#1033,#1034); +#1032 = CARTESIAN_POINT('',(1.225,1.25,0.E+000)); +#1033 = DIRECTION('',(0.E+000,-0.E+000,1.)); +#1034 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1035 = ORIENTED_EDGE('',*,*,#851,.T.); +#1036 = ORIENTED_EDGE('',*,*,#602,.F.); +#1037 = ORIENTED_EDGE('',*,*,#1038,.F.); +#1038 = EDGE_CURVE('',#1028,#595,#1039,.T.); +#1039 = LINE('',#1040,#1041); +#1040 = CARTESIAN_POINT('',(1.225,1.125,0.E+000)); +#1041 = VECTOR('',#1042,1.); +#1042 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1043 = CYLINDRICAL_SURFACE('',#1044,0.125); +#1044 = AXIS2_PLACEMENT_3D('',#1045,#1046,#1047); +#1045 = CARTESIAN_POINT('',(1.225,1.25,0.E+000)); +#1046 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1047 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1048 = ADVANCED_FACE('',(#1049),#1083,.F.); +#1049 = FACE_BOUND('',#1050,.F.); +#1050 = EDGE_LOOP('',(#1051,#1061,#1067,#1068,#1069,#1077)); +#1051 = ORIENTED_EDGE('',*,*,#1052,.F.); +#1052 = EDGE_CURVE('',#1053,#1055,#1057,.T.); +#1053 = VERTEX_POINT('',#1054); +#1054 = CARTESIAN_POINT('',(-1.225,1.375,0.E+000)); +#1055 = VERTEX_POINT('',#1056); +#1056 = CARTESIAN_POINT('',(-1.5,1.375,0.E+000)); +#1057 = LINE('',#1058,#1059); +#1058 = CARTESIAN_POINT('',(-1.225,1.375,0.E+000)); +#1059 = VECTOR('',#1060,1.); +#1060 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1061 = ORIENTED_EDGE('',*,*,#1062,.T.); +#1062 = EDGE_CURVE('',#1053,#216,#1063,.T.); +#1063 = LINE('',#1064,#1065); +#1064 = CARTESIAN_POINT('',(-1.225,1.375,0.E+000)); +#1065 = VECTOR('',#1066,1.); +#1066 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1067 = ORIENTED_EDGE('',*,*,#215,.F.); +#1068 = ORIENTED_EDGE('',*,*,#1013,.F.); +#1069 = ORIENTED_EDGE('',*,*,#1070,.T.); +#1070 = EDGE_CURVE('',#1006,#1071,#1073,.T.); +#1071 = VERTEX_POINT('',#1072); +#1072 = CARTESIAN_POINT('',(-1.5,1.375,0.2)); +#1073 = LINE('',#1074,#1075); +#1074 = CARTESIAN_POINT('',(-1.225,1.375,0.2)); +#1075 = VECTOR('',#1076,1.); +#1076 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1077 = ORIENTED_EDGE('',*,*,#1078,.F.); +#1078 = EDGE_CURVE('',#1055,#1071,#1079,.T.); +#1079 = LINE('',#1080,#1081); +#1080 = CARTESIAN_POINT('',(-1.5,1.375,0.E+000)); +#1081 = VECTOR('',#1082,1.); +#1082 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1083 = PLANE('',#1084); +#1084 = AXIS2_PLACEMENT_3D('',#1085,#1086,#1087); +#1085 = CARTESIAN_POINT('',(-1.225,1.375,0.E+000)); +#1086 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1087 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1088 = ADVANCED_FACE('',(#1089),#1116,.F.); +#1089 = FACE_BOUND('',#1090,.F.); +#1090 = EDGE_LOOP('',(#1091,#1099,#1100,#1101,#1102,#1110)); +#1091 = ORIENTED_EDGE('',*,*,#1092,.F.); +#1092 = EDGE_CURVE('',#1028,#1093,#1095,.T.); +#1093 = VERTEX_POINT('',#1094); +#1094 = CARTESIAN_POINT('',(1.5,1.125,0.E+000)); +#1095 = LINE('',#1096,#1097); +#1096 = CARTESIAN_POINT('',(1.225,1.125,0.E+000)); +#1097 = VECTOR('',#1098,1.); +#1098 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1099 = ORIENTED_EDGE('',*,*,#1038,.T.); +#1100 = ORIENTED_EDGE('',*,*,#594,.F.); +#1101 = ORIENTED_EDGE('',*,*,#771,.T.); +#1102 = ORIENTED_EDGE('',*,*,#1103,.T.); +#1103 = EDGE_CURVE('',#772,#1104,#1106,.T.); +#1104 = VERTEX_POINT('',#1105); +#1105 = CARTESIAN_POINT('',(1.5,1.125,0.2)); +#1106 = LINE('',#1107,#1108); +#1107 = CARTESIAN_POINT('',(1.225,1.125,0.2)); +#1108 = VECTOR('',#1109,1.); +#1109 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1110 = ORIENTED_EDGE('',*,*,#1111,.F.); +#1111 = EDGE_CURVE('',#1093,#1104,#1112,.T.); +#1112 = LINE('',#1113,#1114); +#1113 = CARTESIAN_POINT('',(1.5,1.125,0.E+000)); +#1114 = VECTOR('',#1115,1.); +#1115 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1116 = PLANE('',#1117); +#1117 = AXIS2_PLACEMENT_3D('',#1118,#1119,#1120); +#1118 = CARTESIAN_POINT('',(1.225,1.125,0.E+000)); +#1119 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1120 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1121 = ADVANCED_FACE('',(#1122),#1141,.T.); +#1122 = FACE_BOUND('',#1123,.F.); +#1123 = EDGE_LOOP('',(#1124,#1133,#1139,#1140)); +#1124 = ORIENTED_EDGE('',*,*,#1125,.F.); +#1125 = EDGE_CURVE('',#1126,#1053,#1128,.T.); +#1126 = VERTEX_POINT('',#1127); +#1127 = CARTESIAN_POINT('',(-1.225,1.125,0.E+000)); +#1128 = CIRCLE('',#1129,0.125); +#1129 = AXIS2_PLACEMENT_3D('',#1130,#1131,#1132); +#1130 = CARTESIAN_POINT('',(-1.225,1.25,0.E+000)); +#1131 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1132 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1133 = ORIENTED_EDGE('',*,*,#1134,.T.); +#1134 = EDGE_CURVE('',#1126,#224,#1135,.T.); +#1135 = LINE('',#1136,#1137); +#1136 = CARTESIAN_POINT('',(-1.225,1.125,0.E+000)); +#1137 = VECTOR('',#1138,1.); +#1138 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1139 = ORIENTED_EDGE('',*,*,#223,.F.); +#1140 = ORIENTED_EDGE('',*,*,#1062,.F.); +#1141 = CYLINDRICAL_SURFACE('',#1142,0.125); +#1142 = AXIS2_PLACEMENT_3D('',#1143,#1144,#1145); +#1143 = CARTESIAN_POINT('',(-1.225,1.25,0.E+000)); +#1144 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#1145 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1146 = ADVANCED_FACE('',(#1147),#1174,.F.); +#1147 = FACE_BOUND('',#1148,.F.); +#1148 = EDGE_LOOP('',(#1149,#1157,#1165,#1171,#1172,#1173)); +#1149 = ORIENTED_EDGE('',*,*,#1150,.F.); +#1150 = EDGE_CURVE('',#1151,#1126,#1153,.T.); +#1151 = VERTEX_POINT('',#1152); +#1152 = CARTESIAN_POINT('',(-1.5,1.125,0.E+000)); +#1153 = LINE('',#1154,#1155); +#1154 = CARTESIAN_POINT('',(-1.5,1.125,0.E+000)); +#1155 = VECTOR('',#1156,1.); +#1156 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1157 = ORIENTED_EDGE('',*,*,#1158,.T.); +#1158 = EDGE_CURVE('',#1151,#1159,#1161,.T.); +#1159 = VERTEX_POINT('',#1160); +#1160 = CARTESIAN_POINT('',(-1.5,1.125,0.2)); +#1161 = LINE('',#1162,#1163); +#1162 = CARTESIAN_POINT('',(-1.5,1.125,0.E+000)); +#1163 = VECTOR('',#1164,1.); +#1164 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1165 = ORIENTED_EDGE('',*,*,#1166,.T.); +#1166 = EDGE_CURVE('',#1159,#998,#1167,.T.); +#1167 = LINE('',#1168,#1169); +#1168 = CARTESIAN_POINT('',(-1.5,1.125,0.2)); +#1169 = VECTOR('',#1170,1.); +#1170 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1171 = ORIENTED_EDGE('',*,*,#997,.F.); +#1172 = ORIENTED_EDGE('',*,*,#232,.F.); +#1173 = ORIENTED_EDGE('',*,*,#1134,.F.); +#1174 = PLANE('',#1175); +#1175 = AXIS2_PLACEMENT_3D('',#1176,#1177,#1178); +#1176 = CARTESIAN_POINT('',(-1.5,1.125,0.E+000)); +#1177 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1178 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1179 = ADVANCED_FACE('',(#1180),#1214,.F.); +#1180 = FACE_BOUND('',#1181,.F.); +#1181 = EDGE_LOOP('',(#1182,#1192,#1200,#1206,#1207,#1208)); +#1182 = ORIENTED_EDGE('',*,*,#1183,.F.); +#1183 = EDGE_CURVE('',#1184,#1186,#1188,.T.); +#1184 = VERTEX_POINT('',#1185); +#1185 = CARTESIAN_POINT('',(1.5,0.875,0.E+000)); +#1186 = VERTEX_POINT('',#1187); +#1187 = CARTESIAN_POINT('',(1.225,0.875,0.E+000)); +#1188 = LINE('',#1189,#1190); +#1189 = CARTESIAN_POINT('',(1.5,0.875,0.E+000)); +#1190 = VECTOR('',#1191,1.); +#1191 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1192 = ORIENTED_EDGE('',*,*,#1193,.T.); +#1193 = EDGE_CURVE('',#1184,#1194,#1196,.T.); +#1194 = VERTEX_POINT('',#1195); +#1195 = CARTESIAN_POINT('',(1.5,0.875,0.2)); +#1196 = LINE('',#1197,#1198); +#1197 = CARTESIAN_POINT('',(1.5,0.875,0.E+000)); +#1198 = VECTOR('',#1199,1.); +#1199 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1200 = ORIENTED_EDGE('',*,*,#1201,.T.); +#1201 = EDGE_CURVE('',#1194,#757,#1202,.T.); +#1202 = LINE('',#1203,#1204); +#1203 = CARTESIAN_POINT('',(1.5,0.875,0.2)); +#1204 = VECTOR('',#1205,1.); +#1205 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1206 = ORIENTED_EDGE('',*,*,#764,.T.); +#1207 = ORIENTED_EDGE('',*,*,#578,.F.); +#1208 = ORIENTED_EDGE('',*,*,#1209,.F.); +#1209 = EDGE_CURVE('',#1186,#570,#1210,.T.); +#1210 = LINE('',#1211,#1212); +#1211 = CARTESIAN_POINT('',(1.225,0.875,0.E+000)); +#1212 = VECTOR('',#1213,1.); +#1213 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1214 = PLANE('',#1215); +#1215 = AXIS2_PLACEMENT_3D('',#1216,#1217,#1218); +#1216 = CARTESIAN_POINT('',(1.5,0.875,0.E+000)); +#1217 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1218 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1219 = ADVANCED_FACE('',(#1220),#1239,.T.); +#1220 = FACE_BOUND('',#1221,.F.); +#1221 = EDGE_LOOP('',(#1222,#1231,#1232,#1233)); +#1222 = ORIENTED_EDGE('',*,*,#1223,.F.); +#1223 = EDGE_CURVE('',#1186,#1224,#1226,.T.); +#1224 = VERTEX_POINT('',#1225); +#1225 = CARTESIAN_POINT('',(1.225,0.625,0.E+000)); +#1226 = CIRCLE('',#1227,0.125); +#1227 = AXIS2_PLACEMENT_3D('',#1228,#1229,#1230); +#1228 = CARTESIAN_POINT('',(1.225,0.75,0.E+000)); +#1229 = DIRECTION('',(0.E+000,-0.E+000,1.)); +#1230 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1231 = ORIENTED_EDGE('',*,*,#1209,.T.); +#1232 = ORIENTED_EDGE('',*,*,#569,.F.); +#1233 = ORIENTED_EDGE('',*,*,#1234,.F.); +#1234 = EDGE_CURVE('',#1224,#562,#1235,.T.); +#1235 = LINE('',#1236,#1237); +#1236 = CARTESIAN_POINT('',(1.225,0.625,0.E+000)); +#1237 = VECTOR('',#1238,1.); +#1238 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1239 = CYLINDRICAL_SURFACE('',#1240,0.125); +#1240 = AXIS2_PLACEMENT_3D('',#1241,#1242,#1243); +#1241 = CARTESIAN_POINT('',(1.225,0.75,0.E+000)); +#1242 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1243 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1244 = ADVANCED_FACE('',(#1245),#1279,.F.); +#1245 = FACE_BOUND('',#1246,.F.); +#1246 = EDGE_LOOP('',(#1247,#1257,#1263,#1264,#1265,#1273)); +#1247 = ORIENTED_EDGE('',*,*,#1248,.F.); +#1248 = EDGE_CURVE('',#1249,#1251,#1253,.T.); +#1249 = VERTEX_POINT('',#1250); +#1250 = CARTESIAN_POINT('',(-1.225,0.875,0.E+000)); +#1251 = VERTEX_POINT('',#1252); +#1252 = CARTESIAN_POINT('',(-1.5,0.875,0.E+000)); +#1253 = LINE('',#1254,#1255); +#1254 = CARTESIAN_POINT('',(-1.225,0.875,0.E+000)); +#1255 = VECTOR('',#1256,1.); +#1256 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1257 = ORIENTED_EDGE('',*,*,#1258,.T.); +#1258 = EDGE_CURVE('',#1249,#249,#1259,.T.); +#1259 = LINE('',#1260,#1261); +#1260 = CARTESIAN_POINT('',(-1.225,0.875,0.E+000)); +#1261 = VECTOR('',#1262,1.); +#1262 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1263 = ORIENTED_EDGE('',*,*,#248,.F.); +#1264 = ORIENTED_EDGE('',*,*,#990,.F.); +#1265 = ORIENTED_EDGE('',*,*,#1266,.T.); +#1266 = EDGE_CURVE('',#983,#1267,#1269,.T.); +#1267 = VERTEX_POINT('',#1268); +#1268 = CARTESIAN_POINT('',(-1.5,0.875,0.2)); +#1269 = LINE('',#1270,#1271); +#1270 = CARTESIAN_POINT('',(-1.225,0.875,0.2)); +#1271 = VECTOR('',#1272,1.); +#1272 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1273 = ORIENTED_EDGE('',*,*,#1274,.F.); +#1274 = EDGE_CURVE('',#1251,#1267,#1275,.T.); +#1275 = LINE('',#1276,#1277); +#1276 = CARTESIAN_POINT('',(-1.5,0.875,0.E+000)); +#1277 = VECTOR('',#1278,1.); +#1278 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1279 = PLANE('',#1280); +#1280 = AXIS2_PLACEMENT_3D('',#1281,#1282,#1283); +#1281 = CARTESIAN_POINT('',(-1.225,0.875,0.E+000)); +#1282 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1283 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1284 = ADVANCED_FACE('',(#1285),#1312,.F.); +#1285 = FACE_BOUND('',#1286,.F.); +#1286 = EDGE_LOOP('',(#1287,#1295,#1296,#1297,#1298,#1306)); +#1287 = ORIENTED_EDGE('',*,*,#1288,.F.); +#1288 = EDGE_CURVE('',#1224,#1289,#1291,.T.); +#1289 = VERTEX_POINT('',#1290); +#1290 = CARTESIAN_POINT('',(1.5,0.625,0.E+000)); +#1291 = LINE('',#1292,#1293); +#1292 = CARTESIAN_POINT('',(1.225,0.625,0.E+000)); +#1293 = VECTOR('',#1294,1.); +#1294 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1295 = ORIENTED_EDGE('',*,*,#1234,.T.); +#1296 = ORIENTED_EDGE('',*,*,#561,.F.); +#1297 = ORIENTED_EDGE('',*,*,#748,.T.); +#1298 = ORIENTED_EDGE('',*,*,#1299,.T.); +#1299 = EDGE_CURVE('',#749,#1300,#1302,.T.); +#1300 = VERTEX_POINT('',#1301); +#1301 = CARTESIAN_POINT('',(1.5,0.625,0.2)); +#1302 = LINE('',#1303,#1304); +#1303 = CARTESIAN_POINT('',(1.225,0.625,0.2)); +#1304 = VECTOR('',#1305,1.); +#1305 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1306 = ORIENTED_EDGE('',*,*,#1307,.F.); +#1307 = EDGE_CURVE('',#1289,#1300,#1308,.T.); +#1308 = LINE('',#1309,#1310); +#1309 = CARTESIAN_POINT('',(1.5,0.625,0.E+000)); +#1310 = VECTOR('',#1311,1.); +#1311 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1312 = PLANE('',#1313); +#1313 = AXIS2_PLACEMENT_3D('',#1314,#1315,#1316); +#1314 = CARTESIAN_POINT('',(1.225,0.625,0.E+000)); +#1315 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1316 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1317 = ADVANCED_FACE('',(#1318),#1337,.T.); +#1318 = FACE_BOUND('',#1319,.F.); +#1319 = EDGE_LOOP('',(#1320,#1329,#1335,#1336)); +#1320 = ORIENTED_EDGE('',*,*,#1321,.F.); +#1321 = EDGE_CURVE('',#1322,#1249,#1324,.T.); +#1322 = VERTEX_POINT('',#1323); +#1323 = CARTESIAN_POINT('',(-1.225,0.625,0.E+000)); +#1324 = CIRCLE('',#1325,0.125); +#1325 = AXIS2_PLACEMENT_3D('',#1326,#1327,#1328); +#1326 = CARTESIAN_POINT('',(-1.225,0.75,0.E+000)); +#1327 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1328 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1329 = ORIENTED_EDGE('',*,*,#1330,.T.); +#1330 = EDGE_CURVE('',#1322,#257,#1331,.T.); +#1331 = LINE('',#1332,#1333); +#1332 = CARTESIAN_POINT('',(-1.225,0.625,0.E+000)); +#1333 = VECTOR('',#1334,1.); +#1334 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1335 = ORIENTED_EDGE('',*,*,#256,.F.); +#1336 = ORIENTED_EDGE('',*,*,#1258,.F.); +#1337 = CYLINDRICAL_SURFACE('',#1338,0.125); +#1338 = AXIS2_PLACEMENT_3D('',#1339,#1340,#1341); +#1339 = CARTESIAN_POINT('',(-1.225,0.75,0.E+000)); +#1340 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#1341 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1342 = ADVANCED_FACE('',(#1343),#1370,.F.); +#1343 = FACE_BOUND('',#1344,.F.); +#1344 = EDGE_LOOP('',(#1345,#1353,#1361,#1367,#1368,#1369)); +#1345 = ORIENTED_EDGE('',*,*,#1346,.F.); +#1346 = EDGE_CURVE('',#1347,#1322,#1349,.T.); +#1347 = VERTEX_POINT('',#1348); +#1348 = CARTESIAN_POINT('',(-1.5,0.625,0.E+000)); +#1349 = LINE('',#1350,#1351); +#1350 = CARTESIAN_POINT('',(-1.5,0.625,0.E+000)); +#1351 = VECTOR('',#1352,1.); +#1352 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1353 = ORIENTED_EDGE('',*,*,#1354,.T.); +#1354 = EDGE_CURVE('',#1347,#1355,#1357,.T.); +#1355 = VERTEX_POINT('',#1356); +#1356 = CARTESIAN_POINT('',(-1.5,0.625,0.2)); +#1357 = LINE('',#1358,#1359); +#1358 = CARTESIAN_POINT('',(-1.5,0.625,0.E+000)); +#1359 = VECTOR('',#1360,1.); +#1360 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1361 = ORIENTED_EDGE('',*,*,#1362,.T.); +#1362 = EDGE_CURVE('',#1355,#975,#1363,.T.); +#1363 = LINE('',#1364,#1365); +#1364 = CARTESIAN_POINT('',(-1.5,0.625,0.2)); +#1365 = VECTOR('',#1366,1.); +#1366 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1367 = ORIENTED_EDGE('',*,*,#974,.F.); +#1368 = ORIENTED_EDGE('',*,*,#265,.F.); +#1369 = ORIENTED_EDGE('',*,*,#1330,.F.); +#1370 = PLANE('',#1371); +#1371 = AXIS2_PLACEMENT_3D('',#1372,#1373,#1374); +#1372 = CARTESIAN_POINT('',(-1.5,0.625,0.E+000)); +#1373 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1374 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1375 = ADVANCED_FACE('',(#1376),#1410,.F.); +#1376 = FACE_BOUND('',#1377,.F.); +#1377 = EDGE_LOOP('',(#1378,#1388,#1396,#1402,#1403,#1404)); +#1378 = ORIENTED_EDGE('',*,*,#1379,.F.); +#1379 = EDGE_CURVE('',#1380,#1382,#1384,.T.); +#1380 = VERTEX_POINT('',#1381); +#1381 = CARTESIAN_POINT('',(1.5,0.375,0.E+000)); +#1382 = VERTEX_POINT('',#1383); +#1383 = CARTESIAN_POINT('',(1.225,0.375,0.E+000)); +#1384 = LINE('',#1385,#1386); +#1385 = CARTESIAN_POINT('',(1.5,0.375,0.E+000)); +#1386 = VECTOR('',#1387,1.); +#1387 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1388 = ORIENTED_EDGE('',*,*,#1389,.T.); +#1389 = EDGE_CURVE('',#1380,#1390,#1392,.T.); +#1390 = VERTEX_POINT('',#1391); +#1391 = CARTESIAN_POINT('',(1.5,0.375,0.2)); +#1392 = LINE('',#1393,#1394); +#1393 = CARTESIAN_POINT('',(1.5,0.375,0.E+000)); +#1394 = VECTOR('',#1395,1.); +#1395 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1396 = ORIENTED_EDGE('',*,*,#1397,.T.); +#1397 = EDGE_CURVE('',#1390,#734,#1398,.T.); +#1398 = LINE('',#1399,#1400); +#1399 = CARTESIAN_POINT('',(1.5,0.375,0.2)); +#1400 = VECTOR('',#1401,1.); +#1401 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1402 = ORIENTED_EDGE('',*,*,#741,.T.); +#1403 = ORIENTED_EDGE('',*,*,#545,.F.); +#1404 = ORIENTED_EDGE('',*,*,#1405,.F.); +#1405 = EDGE_CURVE('',#1382,#537,#1406,.T.); +#1406 = LINE('',#1407,#1408); +#1407 = CARTESIAN_POINT('',(1.225,0.375,0.E+000)); +#1408 = VECTOR('',#1409,1.); +#1409 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1410 = PLANE('',#1411); +#1411 = AXIS2_PLACEMENT_3D('',#1412,#1413,#1414); +#1412 = CARTESIAN_POINT('',(1.5,0.375,0.E+000)); +#1413 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1414 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1415 = ADVANCED_FACE('',(#1416),#1435,.T.); +#1416 = FACE_BOUND('',#1417,.F.); +#1417 = EDGE_LOOP('',(#1418,#1427,#1428,#1429)); +#1418 = ORIENTED_EDGE('',*,*,#1419,.F.); +#1419 = EDGE_CURVE('',#1382,#1420,#1422,.T.); +#1420 = VERTEX_POINT('',#1421); +#1421 = CARTESIAN_POINT('',(1.225,0.125,0.E+000)); +#1422 = CIRCLE('',#1423,0.125); +#1423 = AXIS2_PLACEMENT_3D('',#1424,#1425,#1426); +#1424 = CARTESIAN_POINT('',(1.225,0.25,0.E+000)); +#1425 = DIRECTION('',(0.E+000,-0.E+000,1.)); +#1426 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1427 = ORIENTED_EDGE('',*,*,#1405,.T.); +#1428 = ORIENTED_EDGE('',*,*,#536,.F.); +#1429 = ORIENTED_EDGE('',*,*,#1430,.F.); +#1430 = EDGE_CURVE('',#1420,#529,#1431,.T.); +#1431 = LINE('',#1432,#1433); +#1432 = CARTESIAN_POINT('',(1.225,0.125,0.E+000)); +#1433 = VECTOR('',#1434,1.); +#1434 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1435 = CYLINDRICAL_SURFACE('',#1436,0.125); +#1436 = AXIS2_PLACEMENT_3D('',#1437,#1438,#1439); +#1437 = CARTESIAN_POINT('',(1.225,0.25,0.E+000)); +#1438 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1439 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1440 = ADVANCED_FACE('',(#1441),#1475,.F.); +#1441 = FACE_BOUND('',#1442,.F.); +#1442 = EDGE_LOOP('',(#1443,#1453,#1459,#1460,#1461,#1469)); +#1443 = ORIENTED_EDGE('',*,*,#1444,.F.); +#1444 = EDGE_CURVE('',#1445,#1447,#1449,.T.); +#1445 = VERTEX_POINT('',#1446); +#1446 = CARTESIAN_POINT('',(-1.225,0.375,0.E+000)); +#1447 = VERTEX_POINT('',#1448); +#1448 = CARTESIAN_POINT('',(-1.5,0.375,0.E+000)); +#1449 = LINE('',#1450,#1451); +#1450 = CARTESIAN_POINT('',(-1.225,0.375,0.E+000)); +#1451 = VECTOR('',#1452,1.); +#1452 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1453 = ORIENTED_EDGE('',*,*,#1454,.T.); +#1454 = EDGE_CURVE('',#1445,#282,#1455,.T.); +#1455 = LINE('',#1456,#1457); +#1456 = CARTESIAN_POINT('',(-1.225,0.375,0.E+000)); +#1457 = VECTOR('',#1458,1.); +#1458 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1459 = ORIENTED_EDGE('',*,*,#281,.F.); +#1460 = ORIENTED_EDGE('',*,*,#967,.F.); +#1461 = ORIENTED_EDGE('',*,*,#1462,.T.); +#1462 = EDGE_CURVE('',#960,#1463,#1465,.T.); +#1463 = VERTEX_POINT('',#1464); +#1464 = CARTESIAN_POINT('',(-1.5,0.375,0.2)); +#1465 = LINE('',#1466,#1467); +#1466 = CARTESIAN_POINT('',(-1.225,0.375,0.2)); +#1467 = VECTOR('',#1468,1.); +#1468 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1469 = ORIENTED_EDGE('',*,*,#1470,.F.); +#1470 = EDGE_CURVE('',#1447,#1463,#1471,.T.); +#1471 = LINE('',#1472,#1473); +#1472 = CARTESIAN_POINT('',(-1.5,0.375,0.E+000)); +#1473 = VECTOR('',#1474,1.); +#1474 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1475 = PLANE('',#1476); +#1476 = AXIS2_PLACEMENT_3D('',#1477,#1478,#1479); +#1477 = CARTESIAN_POINT('',(-1.225,0.375,0.E+000)); +#1478 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1479 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1480 = ADVANCED_FACE('',(#1481),#1508,.F.); +#1481 = FACE_BOUND('',#1482,.F.); +#1482 = EDGE_LOOP('',(#1483,#1491,#1492,#1493,#1494,#1502)); +#1483 = ORIENTED_EDGE('',*,*,#1484,.F.); +#1484 = EDGE_CURVE('',#1420,#1485,#1487,.T.); +#1485 = VERTEX_POINT('',#1486); +#1486 = CARTESIAN_POINT('',(1.5,0.125,0.E+000)); +#1487 = LINE('',#1488,#1489); +#1488 = CARTESIAN_POINT('',(1.225,0.125,0.E+000)); +#1489 = VECTOR('',#1490,1.); +#1490 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1491 = ORIENTED_EDGE('',*,*,#1430,.T.); +#1492 = ORIENTED_EDGE('',*,*,#528,.F.); +#1493 = ORIENTED_EDGE('',*,*,#725,.T.); +#1494 = ORIENTED_EDGE('',*,*,#1495,.T.); +#1495 = EDGE_CURVE('',#726,#1496,#1498,.T.); +#1496 = VERTEX_POINT('',#1497); +#1497 = CARTESIAN_POINT('',(1.5,0.125,0.2)); +#1498 = LINE('',#1499,#1500); +#1499 = CARTESIAN_POINT('',(1.225,0.125,0.2)); +#1500 = VECTOR('',#1501,1.); +#1501 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1502 = ORIENTED_EDGE('',*,*,#1503,.F.); +#1503 = EDGE_CURVE('',#1485,#1496,#1504,.T.); +#1504 = LINE('',#1505,#1506); +#1505 = CARTESIAN_POINT('',(1.5,0.125,0.E+000)); +#1506 = VECTOR('',#1507,1.); +#1507 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1508 = PLANE('',#1509); +#1509 = AXIS2_PLACEMENT_3D('',#1510,#1511,#1512); +#1510 = CARTESIAN_POINT('',(1.225,0.125,0.E+000)); +#1511 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1512 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1513 = ADVANCED_FACE('',(#1514),#1533,.T.); +#1514 = FACE_BOUND('',#1515,.F.); +#1515 = EDGE_LOOP('',(#1516,#1525,#1531,#1532)); +#1516 = ORIENTED_EDGE('',*,*,#1517,.F.); +#1517 = EDGE_CURVE('',#1518,#1445,#1520,.T.); +#1518 = VERTEX_POINT('',#1519); +#1519 = CARTESIAN_POINT('',(-1.225,0.125,0.E+000)); +#1520 = CIRCLE('',#1521,0.125); +#1521 = AXIS2_PLACEMENT_3D('',#1522,#1523,#1524); +#1522 = CARTESIAN_POINT('',(-1.225,0.25,0.E+000)); +#1523 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1524 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1525 = ORIENTED_EDGE('',*,*,#1526,.T.); +#1526 = EDGE_CURVE('',#1518,#290,#1527,.T.); +#1527 = LINE('',#1528,#1529); +#1528 = CARTESIAN_POINT('',(-1.225,0.125,0.E+000)); +#1529 = VECTOR('',#1530,1.); +#1530 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1531 = ORIENTED_EDGE('',*,*,#289,.F.); +#1532 = ORIENTED_EDGE('',*,*,#1454,.F.); +#1533 = CYLINDRICAL_SURFACE('',#1534,0.125); +#1534 = AXIS2_PLACEMENT_3D('',#1535,#1536,#1537); +#1535 = CARTESIAN_POINT('',(-1.225,0.25,0.E+000)); +#1536 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#1537 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1538 = ADVANCED_FACE('',(#1539),#1566,.F.); +#1539 = FACE_BOUND('',#1540,.F.); +#1540 = EDGE_LOOP('',(#1541,#1549,#1557,#1563,#1564,#1565)); +#1541 = ORIENTED_EDGE('',*,*,#1542,.F.); +#1542 = EDGE_CURVE('',#1543,#1518,#1545,.T.); +#1543 = VERTEX_POINT('',#1544); +#1544 = CARTESIAN_POINT('',(-1.5,0.125,0.E+000)); +#1545 = LINE('',#1546,#1547); +#1546 = CARTESIAN_POINT('',(-1.5,0.125,0.E+000)); +#1547 = VECTOR('',#1548,1.); +#1548 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1549 = ORIENTED_EDGE('',*,*,#1550,.T.); +#1550 = EDGE_CURVE('',#1543,#1551,#1553,.T.); +#1551 = VERTEX_POINT('',#1552); +#1552 = CARTESIAN_POINT('',(-1.5,0.125,0.2)); +#1553 = LINE('',#1554,#1555); +#1554 = CARTESIAN_POINT('',(-1.5,0.125,0.E+000)); +#1555 = VECTOR('',#1556,1.); +#1556 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1557 = ORIENTED_EDGE('',*,*,#1558,.T.); +#1558 = EDGE_CURVE('',#1551,#952,#1559,.T.); +#1559 = LINE('',#1560,#1561); +#1560 = CARTESIAN_POINT('',(-1.5,0.125,0.2)); +#1561 = VECTOR('',#1562,1.); +#1562 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1563 = ORIENTED_EDGE('',*,*,#951,.F.); +#1564 = ORIENTED_EDGE('',*,*,#298,.F.); +#1565 = ORIENTED_EDGE('',*,*,#1526,.F.); +#1566 = PLANE('',#1567); +#1567 = AXIS2_PLACEMENT_3D('',#1568,#1569,#1570); +#1568 = CARTESIAN_POINT('',(-1.5,0.125,0.E+000)); +#1569 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1570 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1571 = ADVANCED_FACE('',(#1572),#1606,.F.); +#1572 = FACE_BOUND('',#1573,.F.); +#1573 = EDGE_LOOP('',(#1574,#1584,#1592,#1598,#1599,#1600)); +#1574 = ORIENTED_EDGE('',*,*,#1575,.F.); +#1575 = EDGE_CURVE('',#1576,#1578,#1580,.T.); +#1576 = VERTEX_POINT('',#1577); +#1577 = CARTESIAN_POINT('',(1.5,-0.125,0.E+000)); +#1578 = VERTEX_POINT('',#1579); +#1579 = CARTESIAN_POINT('',(1.225,-0.125,0.E+000)); +#1580 = LINE('',#1581,#1582); +#1581 = CARTESIAN_POINT('',(1.5,-0.125,0.E+000)); +#1582 = VECTOR('',#1583,1.); +#1583 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1584 = ORIENTED_EDGE('',*,*,#1585,.T.); +#1585 = EDGE_CURVE('',#1576,#1586,#1588,.T.); +#1586 = VERTEX_POINT('',#1587); +#1587 = CARTESIAN_POINT('',(1.5,-0.125,0.2)); +#1588 = LINE('',#1589,#1590); +#1589 = CARTESIAN_POINT('',(1.5,-0.125,0.E+000)); +#1590 = VECTOR('',#1591,1.); +#1591 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1592 = ORIENTED_EDGE('',*,*,#1593,.T.); +#1593 = EDGE_CURVE('',#1586,#711,#1594,.T.); +#1594 = LINE('',#1595,#1596); +#1595 = CARTESIAN_POINT('',(1.5,-0.125,0.2)); +#1596 = VECTOR('',#1597,1.); +#1597 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1598 = ORIENTED_EDGE('',*,*,#718,.T.); +#1599 = ORIENTED_EDGE('',*,*,#512,.F.); +#1600 = ORIENTED_EDGE('',*,*,#1601,.F.); +#1601 = EDGE_CURVE('',#1578,#504,#1602,.T.); +#1602 = LINE('',#1603,#1604); +#1603 = CARTESIAN_POINT('',(1.225,-0.125,0.E+000)); +#1604 = VECTOR('',#1605,1.); +#1605 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1606 = PLANE('',#1607); +#1607 = AXIS2_PLACEMENT_3D('',#1608,#1609,#1610); +#1608 = CARTESIAN_POINT('',(1.5,-0.125,0.E+000)); +#1609 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1610 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1611 = ADVANCED_FACE('',(#1612),#1631,.T.); +#1612 = FACE_BOUND('',#1613,.F.); +#1613 = EDGE_LOOP('',(#1614,#1623,#1624,#1625)); +#1614 = ORIENTED_EDGE('',*,*,#1615,.F.); +#1615 = EDGE_CURVE('',#1578,#1616,#1618,.T.); +#1616 = VERTEX_POINT('',#1617); +#1617 = CARTESIAN_POINT('',(1.225,-0.375,0.E+000)); +#1618 = CIRCLE('',#1619,0.125); +#1619 = AXIS2_PLACEMENT_3D('',#1620,#1621,#1622); +#1620 = CARTESIAN_POINT('',(1.225,-0.25,0.E+000)); +#1621 = DIRECTION('',(0.E+000,-0.E+000,1.)); +#1622 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1623 = ORIENTED_EDGE('',*,*,#1601,.T.); +#1624 = ORIENTED_EDGE('',*,*,#503,.F.); +#1625 = ORIENTED_EDGE('',*,*,#1626,.F.); +#1626 = EDGE_CURVE('',#1616,#496,#1627,.T.); +#1627 = LINE('',#1628,#1629); +#1628 = CARTESIAN_POINT('',(1.225,-0.375,0.E+000)); +#1629 = VECTOR('',#1630,1.); +#1630 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1631 = CYLINDRICAL_SURFACE('',#1632,0.125); +#1632 = AXIS2_PLACEMENT_3D('',#1633,#1634,#1635); +#1633 = CARTESIAN_POINT('',(1.225,-0.25,0.E+000)); +#1634 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1635 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1636 = ADVANCED_FACE('',(#1637),#1671,.F.); +#1637 = FACE_BOUND('',#1638,.F.); +#1638 = EDGE_LOOP('',(#1639,#1649,#1655,#1656,#1657,#1665)); +#1639 = ORIENTED_EDGE('',*,*,#1640,.F.); +#1640 = EDGE_CURVE('',#1641,#1643,#1645,.T.); +#1641 = VERTEX_POINT('',#1642); +#1642 = CARTESIAN_POINT('',(-1.225,-0.125,0.E+000)); +#1643 = VERTEX_POINT('',#1644); +#1644 = CARTESIAN_POINT('',(-1.5,-0.125,0.E+000)); +#1645 = LINE('',#1646,#1647); +#1646 = CARTESIAN_POINT('',(-1.225,-0.125,0.E+000)); +#1647 = VECTOR('',#1648,1.); +#1648 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1649 = ORIENTED_EDGE('',*,*,#1650,.T.); +#1650 = EDGE_CURVE('',#1641,#315,#1651,.T.); +#1651 = LINE('',#1652,#1653); +#1652 = CARTESIAN_POINT('',(-1.225,-0.125,0.E+000)); +#1653 = VECTOR('',#1654,1.); +#1654 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1655 = ORIENTED_EDGE('',*,*,#314,.F.); +#1656 = ORIENTED_EDGE('',*,*,#944,.F.); +#1657 = ORIENTED_EDGE('',*,*,#1658,.T.); +#1658 = EDGE_CURVE('',#937,#1659,#1661,.T.); +#1659 = VERTEX_POINT('',#1660); +#1660 = CARTESIAN_POINT('',(-1.5,-0.125,0.2)); +#1661 = LINE('',#1662,#1663); +#1662 = CARTESIAN_POINT('',(-1.225,-0.125,0.2)); +#1663 = VECTOR('',#1664,1.); +#1664 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1665 = ORIENTED_EDGE('',*,*,#1666,.F.); +#1666 = EDGE_CURVE('',#1643,#1659,#1667,.T.); +#1667 = LINE('',#1668,#1669); +#1668 = CARTESIAN_POINT('',(-1.5,-0.125,0.E+000)); +#1669 = VECTOR('',#1670,1.); +#1670 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1671 = PLANE('',#1672); +#1672 = AXIS2_PLACEMENT_3D('',#1673,#1674,#1675); +#1673 = CARTESIAN_POINT('',(-1.225,-0.125,0.E+000)); +#1674 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1675 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1676 = ADVANCED_FACE('',(#1677),#1704,.F.); +#1677 = FACE_BOUND('',#1678,.F.); +#1678 = EDGE_LOOP('',(#1679,#1687,#1688,#1689,#1690,#1698)); +#1679 = ORIENTED_EDGE('',*,*,#1680,.F.); +#1680 = EDGE_CURVE('',#1616,#1681,#1683,.T.); +#1681 = VERTEX_POINT('',#1682); +#1682 = CARTESIAN_POINT('',(1.5,-0.375,0.E+000)); +#1683 = LINE('',#1684,#1685); +#1684 = CARTESIAN_POINT('',(1.225,-0.375,0.E+000)); +#1685 = VECTOR('',#1686,1.); +#1686 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1687 = ORIENTED_EDGE('',*,*,#1626,.T.); +#1688 = ORIENTED_EDGE('',*,*,#495,.F.); +#1689 = ORIENTED_EDGE('',*,*,#702,.T.); +#1690 = ORIENTED_EDGE('',*,*,#1691,.T.); +#1691 = EDGE_CURVE('',#703,#1692,#1694,.T.); +#1692 = VERTEX_POINT('',#1693); +#1693 = CARTESIAN_POINT('',(1.5,-0.375,0.2)); +#1694 = LINE('',#1695,#1696); +#1695 = CARTESIAN_POINT('',(1.225,-0.375,0.2)); +#1696 = VECTOR('',#1697,1.); +#1697 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1698 = ORIENTED_EDGE('',*,*,#1699,.F.); +#1699 = EDGE_CURVE('',#1681,#1692,#1700,.T.); +#1700 = LINE('',#1701,#1702); +#1701 = CARTESIAN_POINT('',(1.5,-0.375,0.E+000)); +#1702 = VECTOR('',#1703,1.); +#1703 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1704 = PLANE('',#1705); +#1705 = AXIS2_PLACEMENT_3D('',#1706,#1707,#1708); +#1706 = CARTESIAN_POINT('',(1.225,-0.375,0.E+000)); +#1707 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1708 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1709 = ADVANCED_FACE('',(#1710),#1729,.T.); +#1710 = FACE_BOUND('',#1711,.F.); +#1711 = EDGE_LOOP('',(#1712,#1721,#1727,#1728)); +#1712 = ORIENTED_EDGE('',*,*,#1713,.F.); +#1713 = EDGE_CURVE('',#1714,#1641,#1716,.T.); +#1714 = VERTEX_POINT('',#1715); +#1715 = CARTESIAN_POINT('',(-1.225,-0.375,0.E+000)); +#1716 = CIRCLE('',#1717,0.125); +#1717 = AXIS2_PLACEMENT_3D('',#1718,#1719,#1720); +#1718 = CARTESIAN_POINT('',(-1.225,-0.25,0.E+000)); +#1719 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1720 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1721 = ORIENTED_EDGE('',*,*,#1722,.T.); +#1722 = EDGE_CURVE('',#1714,#323,#1723,.T.); +#1723 = LINE('',#1724,#1725); +#1724 = CARTESIAN_POINT('',(-1.225,-0.375,0.E+000)); +#1725 = VECTOR('',#1726,1.); +#1726 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1727 = ORIENTED_EDGE('',*,*,#322,.F.); +#1728 = ORIENTED_EDGE('',*,*,#1650,.F.); +#1729 = CYLINDRICAL_SURFACE('',#1730,0.125); +#1730 = AXIS2_PLACEMENT_3D('',#1731,#1732,#1733); +#1731 = CARTESIAN_POINT('',(-1.225,-0.25,0.E+000)); +#1732 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#1733 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1734 = ADVANCED_FACE('',(#1735),#1762,.F.); +#1735 = FACE_BOUND('',#1736,.F.); +#1736 = EDGE_LOOP('',(#1737,#1745,#1753,#1759,#1760,#1761)); +#1737 = ORIENTED_EDGE('',*,*,#1738,.F.); +#1738 = EDGE_CURVE('',#1739,#1714,#1741,.T.); +#1739 = VERTEX_POINT('',#1740); +#1740 = CARTESIAN_POINT('',(-1.5,-0.375,0.E+000)); +#1741 = LINE('',#1742,#1743); +#1742 = CARTESIAN_POINT('',(-1.5,-0.375,0.E+000)); +#1743 = VECTOR('',#1744,1.); +#1744 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1745 = ORIENTED_EDGE('',*,*,#1746,.T.); +#1746 = EDGE_CURVE('',#1739,#1747,#1749,.T.); +#1747 = VERTEX_POINT('',#1748); +#1748 = CARTESIAN_POINT('',(-1.5,-0.375,0.2)); +#1749 = LINE('',#1750,#1751); +#1750 = CARTESIAN_POINT('',(-1.5,-0.375,0.E+000)); +#1751 = VECTOR('',#1752,1.); +#1752 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1753 = ORIENTED_EDGE('',*,*,#1754,.T.); +#1754 = EDGE_CURVE('',#1747,#929,#1755,.T.); +#1755 = LINE('',#1756,#1757); +#1756 = CARTESIAN_POINT('',(-1.5,-0.375,0.2)); +#1757 = VECTOR('',#1758,1.); +#1758 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1759 = ORIENTED_EDGE('',*,*,#928,.F.); +#1760 = ORIENTED_EDGE('',*,*,#331,.F.); +#1761 = ORIENTED_EDGE('',*,*,#1722,.F.); +#1762 = PLANE('',#1763); +#1763 = AXIS2_PLACEMENT_3D('',#1764,#1765,#1766); +#1764 = CARTESIAN_POINT('',(-1.5,-0.375,0.E+000)); +#1765 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1766 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1767 = ADVANCED_FACE('',(#1768),#1802,.F.); +#1768 = FACE_BOUND('',#1769,.F.); +#1769 = EDGE_LOOP('',(#1770,#1780,#1788,#1794,#1795,#1796)); +#1770 = ORIENTED_EDGE('',*,*,#1771,.F.); +#1771 = EDGE_CURVE('',#1772,#1774,#1776,.T.); +#1772 = VERTEX_POINT('',#1773); +#1773 = CARTESIAN_POINT('',(1.5,-0.625,0.E+000)); +#1774 = VERTEX_POINT('',#1775); +#1775 = CARTESIAN_POINT('',(1.225,-0.625,0.E+000)); +#1776 = LINE('',#1777,#1778); +#1777 = CARTESIAN_POINT('',(1.5,-0.625,0.E+000)); +#1778 = VECTOR('',#1779,1.); +#1779 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1780 = ORIENTED_EDGE('',*,*,#1781,.T.); +#1781 = EDGE_CURVE('',#1772,#1782,#1784,.T.); +#1782 = VERTEX_POINT('',#1783); +#1783 = CARTESIAN_POINT('',(1.5,-0.625,0.2)); +#1784 = LINE('',#1785,#1786); +#1785 = CARTESIAN_POINT('',(1.5,-0.625,0.E+000)); +#1786 = VECTOR('',#1787,1.); +#1787 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1788 = ORIENTED_EDGE('',*,*,#1789,.T.); +#1789 = EDGE_CURVE('',#1782,#688,#1790,.T.); +#1790 = LINE('',#1791,#1792); +#1791 = CARTESIAN_POINT('',(1.5,-0.625,0.2)); +#1792 = VECTOR('',#1793,1.); +#1793 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1794 = ORIENTED_EDGE('',*,*,#695,.T.); +#1795 = ORIENTED_EDGE('',*,*,#479,.F.); +#1796 = ORIENTED_EDGE('',*,*,#1797,.F.); +#1797 = EDGE_CURVE('',#1774,#471,#1798,.T.); +#1798 = LINE('',#1799,#1800); +#1799 = CARTESIAN_POINT('',(1.225,-0.625,0.E+000)); +#1800 = VECTOR('',#1801,1.); +#1801 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1802 = PLANE('',#1803); +#1803 = AXIS2_PLACEMENT_3D('',#1804,#1805,#1806); +#1804 = CARTESIAN_POINT('',(1.5,-0.625,0.E+000)); +#1805 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1806 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1807 = ADVANCED_FACE('',(#1808),#1827,.T.); +#1808 = FACE_BOUND('',#1809,.F.); +#1809 = EDGE_LOOP('',(#1810,#1819,#1820,#1821)); +#1810 = ORIENTED_EDGE('',*,*,#1811,.F.); +#1811 = EDGE_CURVE('',#1774,#1812,#1814,.T.); +#1812 = VERTEX_POINT('',#1813); +#1813 = CARTESIAN_POINT('',(1.225,-0.875,0.E+000)); +#1814 = CIRCLE('',#1815,0.125); +#1815 = AXIS2_PLACEMENT_3D('',#1816,#1817,#1818); +#1816 = CARTESIAN_POINT('',(1.225,-0.75,0.E+000)); +#1817 = DIRECTION('',(0.E+000,-0.E+000,1.)); +#1818 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1819 = ORIENTED_EDGE('',*,*,#1797,.T.); +#1820 = ORIENTED_EDGE('',*,*,#470,.F.); +#1821 = ORIENTED_EDGE('',*,*,#1822,.F.); +#1822 = EDGE_CURVE('',#1812,#463,#1823,.T.); +#1823 = LINE('',#1824,#1825); +#1824 = CARTESIAN_POINT('',(1.225,-0.875,0.E+000)); +#1825 = VECTOR('',#1826,1.); +#1826 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1827 = CYLINDRICAL_SURFACE('',#1828,0.125); +#1828 = AXIS2_PLACEMENT_3D('',#1829,#1830,#1831); +#1829 = CARTESIAN_POINT('',(1.225,-0.75,0.E+000)); +#1830 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#1831 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1832 = ADVANCED_FACE('',(#1833),#1867,.F.); +#1833 = FACE_BOUND('',#1834,.F.); +#1834 = EDGE_LOOP('',(#1835,#1845,#1851,#1852,#1853,#1861)); +#1835 = ORIENTED_EDGE('',*,*,#1836,.F.); +#1836 = EDGE_CURVE('',#1837,#1839,#1841,.T.); +#1837 = VERTEX_POINT('',#1838); +#1838 = CARTESIAN_POINT('',(-1.225,-0.625,0.E+000)); +#1839 = VERTEX_POINT('',#1840); +#1840 = CARTESIAN_POINT('',(-1.5,-0.625,0.E+000)); +#1841 = LINE('',#1842,#1843); +#1842 = CARTESIAN_POINT('',(-1.225,-0.625,0.E+000)); +#1843 = VECTOR('',#1844,1.); +#1844 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1845 = ORIENTED_EDGE('',*,*,#1846,.T.); +#1846 = EDGE_CURVE('',#1837,#348,#1847,.T.); +#1847 = LINE('',#1848,#1849); +#1848 = CARTESIAN_POINT('',(-1.225,-0.625,0.E+000)); +#1849 = VECTOR('',#1850,1.); +#1850 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1851 = ORIENTED_EDGE('',*,*,#347,.F.); +#1852 = ORIENTED_EDGE('',*,*,#921,.F.); +#1853 = ORIENTED_EDGE('',*,*,#1854,.T.); +#1854 = EDGE_CURVE('',#914,#1855,#1857,.T.); +#1855 = VERTEX_POINT('',#1856); +#1856 = CARTESIAN_POINT('',(-1.5,-0.625,0.2)); +#1857 = LINE('',#1858,#1859); +#1858 = CARTESIAN_POINT('',(-1.225,-0.625,0.2)); +#1859 = VECTOR('',#1860,1.); +#1860 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1861 = ORIENTED_EDGE('',*,*,#1862,.F.); +#1862 = EDGE_CURVE('',#1839,#1855,#1863,.T.); +#1863 = LINE('',#1864,#1865); +#1864 = CARTESIAN_POINT('',(-1.5,-0.625,0.E+000)); +#1865 = VECTOR('',#1866,1.); +#1866 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1867 = PLANE('',#1868); +#1868 = AXIS2_PLACEMENT_3D('',#1869,#1870,#1871); +#1869 = CARTESIAN_POINT('',(-1.225,-0.625,0.E+000)); +#1870 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1871 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1872 = ADVANCED_FACE('',(#1873),#1900,.F.); +#1873 = FACE_BOUND('',#1874,.F.); +#1874 = EDGE_LOOP('',(#1875,#1883,#1884,#1885,#1886,#1894)); +#1875 = ORIENTED_EDGE('',*,*,#1876,.F.); +#1876 = EDGE_CURVE('',#1812,#1877,#1879,.T.); +#1877 = VERTEX_POINT('',#1878); +#1878 = CARTESIAN_POINT('',(1.5,-0.875,0.E+000)); +#1879 = LINE('',#1880,#1881); +#1880 = CARTESIAN_POINT('',(1.225,-0.875,0.E+000)); +#1881 = VECTOR('',#1882,1.); +#1882 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1883 = ORIENTED_EDGE('',*,*,#1822,.T.); +#1884 = ORIENTED_EDGE('',*,*,#462,.F.); +#1885 = ORIENTED_EDGE('',*,*,#679,.T.); +#1886 = ORIENTED_EDGE('',*,*,#1887,.T.); +#1887 = EDGE_CURVE('',#680,#1888,#1890,.T.); +#1888 = VERTEX_POINT('',#1889); +#1889 = CARTESIAN_POINT('',(1.5,-0.875,0.2)); +#1890 = LINE('',#1891,#1892); +#1891 = CARTESIAN_POINT('',(1.225,-0.875,0.2)); +#1892 = VECTOR('',#1893,1.); +#1893 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1894 = ORIENTED_EDGE('',*,*,#1895,.F.); +#1895 = EDGE_CURVE('',#1877,#1888,#1896,.T.); +#1896 = LINE('',#1897,#1898); +#1897 = CARTESIAN_POINT('',(1.5,-0.875,0.E+000)); +#1898 = VECTOR('',#1899,1.); +#1899 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1900 = PLANE('',#1901); +#1901 = AXIS2_PLACEMENT_3D('',#1902,#1903,#1904); +#1902 = CARTESIAN_POINT('',(1.225,-0.875,0.E+000)); +#1903 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1904 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1905 = ADVANCED_FACE('',(#1906),#1925,.T.); +#1906 = FACE_BOUND('',#1907,.F.); +#1907 = EDGE_LOOP('',(#1908,#1917,#1923,#1924)); +#1908 = ORIENTED_EDGE('',*,*,#1909,.F.); +#1909 = EDGE_CURVE('',#1910,#1837,#1912,.T.); +#1910 = VERTEX_POINT('',#1911); +#1911 = CARTESIAN_POINT('',(-1.225,-0.875,0.E+000)); +#1912 = CIRCLE('',#1913,0.125); +#1913 = AXIS2_PLACEMENT_3D('',#1914,#1915,#1916); +#1914 = CARTESIAN_POINT('',(-1.225,-0.75,0.E+000)); +#1915 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1916 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1917 = ORIENTED_EDGE('',*,*,#1918,.T.); +#1918 = EDGE_CURVE('',#1910,#356,#1919,.T.); +#1919 = LINE('',#1920,#1921); +#1920 = CARTESIAN_POINT('',(-1.225,-0.875,0.E+000)); +#1921 = VECTOR('',#1922,1.); +#1922 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1923 = ORIENTED_EDGE('',*,*,#355,.F.); +#1924 = ORIENTED_EDGE('',*,*,#1846,.F.); +#1925 = CYLINDRICAL_SURFACE('',#1926,0.125); +#1926 = AXIS2_PLACEMENT_3D('',#1927,#1928,#1929); +#1927 = CARTESIAN_POINT('',(-1.225,-0.75,0.E+000)); +#1928 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#1929 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1930 = ADVANCED_FACE('',(#1931),#1958,.F.); +#1931 = FACE_BOUND('',#1932,.F.); +#1932 = EDGE_LOOP('',(#1933,#1941,#1949,#1955,#1956,#1957)); +#1933 = ORIENTED_EDGE('',*,*,#1934,.F.); +#1934 = EDGE_CURVE('',#1935,#1910,#1937,.T.); +#1935 = VERTEX_POINT('',#1936); +#1936 = CARTESIAN_POINT('',(-1.5,-0.875,0.E+000)); +#1937 = LINE('',#1938,#1939); +#1938 = CARTESIAN_POINT('',(-1.5,-0.875,0.E+000)); +#1939 = VECTOR('',#1940,1.); +#1940 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1941 = ORIENTED_EDGE('',*,*,#1942,.T.); +#1942 = EDGE_CURVE('',#1935,#1943,#1945,.T.); +#1943 = VERTEX_POINT('',#1944); +#1944 = CARTESIAN_POINT('',(-1.5,-0.875,0.2)); +#1945 = LINE('',#1946,#1947); +#1946 = CARTESIAN_POINT('',(-1.5,-0.875,0.E+000)); +#1947 = VECTOR('',#1948,1.); +#1948 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1949 = ORIENTED_EDGE('',*,*,#1950,.T.); +#1950 = EDGE_CURVE('',#1943,#906,#1951,.T.); +#1951 = LINE('',#1952,#1953); +#1952 = CARTESIAN_POINT('',(-1.5,-0.875,0.2)); +#1953 = VECTOR('',#1954,1.); +#1954 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1955 = ORIENTED_EDGE('',*,*,#905,.F.); +#1956 = ORIENTED_EDGE('',*,*,#364,.F.); +#1957 = ORIENTED_EDGE('',*,*,#1918,.F.); +#1958 = PLANE('',#1959); +#1959 = AXIS2_PLACEMENT_3D('',#1960,#1961,#1962); +#1960 = CARTESIAN_POINT('',(-1.5,-0.875,0.E+000)); +#1961 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1962 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1963 = ADVANCED_FACE('',(#1964),#1998,.F.); +#1964 = FACE_BOUND('',#1965,.F.); +#1965 = EDGE_LOOP('',(#1966,#1976,#1984,#1990,#1991,#1992)); +#1966 = ORIENTED_EDGE('',*,*,#1967,.F.); +#1967 = EDGE_CURVE('',#1968,#1970,#1972,.T.); +#1968 = VERTEX_POINT('',#1969); +#1969 = CARTESIAN_POINT('',(1.5,-1.125,0.E+000)); +#1970 = VERTEX_POINT('',#1971); +#1971 = CARTESIAN_POINT('',(1.225,-1.125,0.E+000)); +#1972 = LINE('',#1973,#1974); +#1973 = CARTESIAN_POINT('',(1.5,-1.125,0.E+000)); +#1974 = VECTOR('',#1975,1.); +#1975 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1976 = ORIENTED_EDGE('',*,*,#1977,.T.); +#1977 = EDGE_CURVE('',#1968,#1978,#1980,.T.); +#1978 = VERTEX_POINT('',#1979); +#1979 = CARTESIAN_POINT('',(1.5,-1.125,0.2)); +#1980 = LINE('',#1981,#1982); +#1981 = CARTESIAN_POINT('',(1.5,-1.125,0.E+000)); +#1982 = VECTOR('',#1983,1.); +#1983 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1984 = ORIENTED_EDGE('',*,*,#1985,.T.); +#1985 = EDGE_CURVE('',#1978,#665,#1986,.T.); +#1986 = LINE('',#1987,#1988); +#1987 = CARTESIAN_POINT('',(1.5,-1.125,0.2)); +#1988 = VECTOR('',#1989,1.); +#1989 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1990 = ORIENTED_EDGE('',*,*,#672,.T.); +#1991 = ORIENTED_EDGE('',*,*,#446,.F.); +#1992 = ORIENTED_EDGE('',*,*,#1993,.F.); +#1993 = EDGE_CURVE('',#1970,#438,#1994,.T.); +#1994 = LINE('',#1995,#1996); +#1995 = CARTESIAN_POINT('',(1.225,-1.125,0.E+000)); +#1996 = VECTOR('',#1997,1.); +#1997 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1998 = PLANE('',#1999); +#1999 = AXIS2_PLACEMENT_3D('',#2000,#2001,#2002); +#2000 = CARTESIAN_POINT('',(1.5,-1.125,0.E+000)); +#2001 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2002 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2003 = ADVANCED_FACE('',(#2004),#2023,.T.); +#2004 = FACE_BOUND('',#2005,.F.); +#2005 = EDGE_LOOP('',(#2006,#2015,#2016,#2017)); +#2006 = ORIENTED_EDGE('',*,*,#2007,.F.); +#2007 = EDGE_CURVE('',#1970,#2008,#2010,.T.); +#2008 = VERTEX_POINT('',#2009); +#2009 = CARTESIAN_POINT('',(1.225,-1.375,0.E+000)); +#2010 = CIRCLE('',#2011,0.125); +#2011 = AXIS2_PLACEMENT_3D('',#2012,#2013,#2014); +#2012 = CARTESIAN_POINT('',(1.225,-1.25,0.E+000)); +#2013 = DIRECTION('',(0.E+000,-0.E+000,1.)); +#2014 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2015 = ORIENTED_EDGE('',*,*,#1993,.T.); +#2016 = ORIENTED_EDGE('',*,*,#437,.F.); +#2017 = ORIENTED_EDGE('',*,*,#2018,.F.); +#2018 = EDGE_CURVE('',#2008,#430,#2019,.T.); +#2019 = LINE('',#2020,#2021); +#2020 = CARTESIAN_POINT('',(1.225,-1.375,0.E+000)); +#2021 = VECTOR('',#2022,1.); +#2022 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2023 = CYLINDRICAL_SURFACE('',#2024,0.125); +#2024 = AXIS2_PLACEMENT_3D('',#2025,#2026,#2027); +#2025 = CARTESIAN_POINT('',(1.225,-1.25,0.E+000)); +#2026 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2027 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2028 = ADVANCED_FACE('',(#2029),#2063,.F.); +#2029 = FACE_BOUND('',#2030,.F.); +#2030 = EDGE_LOOP('',(#2031,#2041,#2047,#2048,#2049,#2057)); +#2031 = ORIENTED_EDGE('',*,*,#2032,.F.); +#2032 = EDGE_CURVE('',#2033,#2035,#2037,.T.); +#2033 = VERTEX_POINT('',#2034); +#2034 = CARTESIAN_POINT('',(-1.225,-1.125,0.E+000)); +#2035 = VERTEX_POINT('',#2036); +#2036 = CARTESIAN_POINT('',(-1.5,-1.125,0.E+000)); +#2037 = LINE('',#2038,#2039); +#2038 = CARTESIAN_POINT('',(-1.225,-1.125,0.E+000)); +#2039 = VECTOR('',#2040,1.); +#2040 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2041 = ORIENTED_EDGE('',*,*,#2042,.T.); +#2042 = EDGE_CURVE('',#2033,#381,#2043,.T.); +#2043 = LINE('',#2044,#2045); +#2044 = CARTESIAN_POINT('',(-1.225,-1.125,0.E+000)); +#2045 = VECTOR('',#2046,1.); +#2046 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2047 = ORIENTED_EDGE('',*,*,#380,.F.); +#2048 = ORIENTED_EDGE('',*,*,#898,.F.); +#2049 = ORIENTED_EDGE('',*,*,#2050,.T.); +#2050 = EDGE_CURVE('',#891,#2051,#2053,.T.); +#2051 = VERTEX_POINT('',#2052); +#2052 = CARTESIAN_POINT('',(-1.5,-1.125,0.2)); +#2053 = LINE('',#2054,#2055); +#2054 = CARTESIAN_POINT('',(-1.225,-1.125,0.2)); +#2055 = VECTOR('',#2056,1.); +#2056 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2057 = ORIENTED_EDGE('',*,*,#2058,.F.); +#2058 = EDGE_CURVE('',#2035,#2051,#2059,.T.); +#2059 = LINE('',#2060,#2061); +#2060 = CARTESIAN_POINT('',(-1.5,-1.125,0.E+000)); +#2061 = VECTOR('',#2062,1.); +#2062 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2063 = PLANE('',#2064); +#2064 = AXIS2_PLACEMENT_3D('',#2065,#2066,#2067); +#2065 = CARTESIAN_POINT('',(-1.225,-1.125,0.E+000)); +#2066 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2067 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#2068 = ADVANCED_FACE('',(#2069),#2096,.F.); +#2069 = FACE_BOUND('',#2070,.F.); +#2070 = EDGE_LOOP('',(#2071,#2079,#2080,#2081,#2082,#2090)); +#2071 = ORIENTED_EDGE('',*,*,#2072,.F.); +#2072 = EDGE_CURVE('',#2008,#2073,#2075,.T.); +#2073 = VERTEX_POINT('',#2074); +#2074 = CARTESIAN_POINT('',(1.5,-1.375,0.E+000)); +#2075 = LINE('',#2076,#2077); +#2076 = CARTESIAN_POINT('',(1.225,-1.375,0.E+000)); +#2077 = VECTOR('',#2078,1.); +#2078 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2079 = ORIENTED_EDGE('',*,*,#2018,.T.); +#2080 = ORIENTED_EDGE('',*,*,#429,.F.); +#2081 = ORIENTED_EDGE('',*,*,#656,.T.); +#2082 = ORIENTED_EDGE('',*,*,#2083,.T.); +#2083 = EDGE_CURVE('',#657,#2084,#2086,.T.); +#2084 = VERTEX_POINT('',#2085); +#2085 = CARTESIAN_POINT('',(1.5,-1.375,0.2)); +#2086 = LINE('',#2087,#2088); +#2087 = CARTESIAN_POINT('',(1.225,-1.375,0.2)); +#2088 = VECTOR('',#2089,1.); +#2089 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2090 = ORIENTED_EDGE('',*,*,#2091,.F.); +#2091 = EDGE_CURVE('',#2073,#2084,#2092,.T.); +#2092 = LINE('',#2093,#2094); +#2093 = CARTESIAN_POINT('',(1.5,-1.375,0.E+000)); +#2094 = VECTOR('',#2095,1.); +#2095 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2096 = PLANE('',#2097); +#2097 = AXIS2_PLACEMENT_3D('',#2098,#2099,#2100); +#2098 = CARTESIAN_POINT('',(1.225,-1.375,0.E+000)); +#2099 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2100 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#2101 = ADVANCED_FACE('',(#2102),#2121,.T.); +#2102 = FACE_BOUND('',#2103,.F.); +#2103 = EDGE_LOOP('',(#2104,#2113,#2119,#2120)); +#2104 = ORIENTED_EDGE('',*,*,#2105,.F.); +#2105 = EDGE_CURVE('',#2106,#2033,#2108,.T.); +#2106 = VERTEX_POINT('',#2107); +#2107 = CARTESIAN_POINT('',(-1.225,-1.375,0.E+000)); +#2108 = CIRCLE('',#2109,0.125); +#2109 = AXIS2_PLACEMENT_3D('',#2110,#2111,#2112); +#2110 = CARTESIAN_POINT('',(-1.225,-1.25,0.E+000)); +#2111 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2112 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2113 = ORIENTED_EDGE('',*,*,#2114,.T.); +#2114 = EDGE_CURVE('',#2106,#389,#2115,.T.); +#2115 = LINE('',#2116,#2117); +#2116 = CARTESIAN_POINT('',(-1.225,-1.375,0.E+000)); +#2117 = VECTOR('',#2118,1.); +#2118 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2119 = ORIENTED_EDGE('',*,*,#388,.F.); +#2120 = ORIENTED_EDGE('',*,*,#2042,.F.); +#2121 = CYLINDRICAL_SURFACE('',#2122,0.125); +#2122 = AXIS2_PLACEMENT_3D('',#2123,#2124,#2125); +#2123 = CARTESIAN_POINT('',(-1.225,-1.25,0.E+000)); +#2124 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2125 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2126 = ADVANCED_FACE('',(#2127),#2154,.F.); +#2127 = FACE_BOUND('',#2128,.F.); +#2128 = EDGE_LOOP('',(#2129,#2137,#2145,#2151,#2152,#2153)); +#2129 = ORIENTED_EDGE('',*,*,#2130,.F.); +#2130 = EDGE_CURVE('',#2131,#2106,#2133,.T.); +#2131 = VERTEX_POINT('',#2132); +#2132 = CARTESIAN_POINT('',(-1.5,-1.375,0.E+000)); +#2133 = LINE('',#2134,#2135); +#2134 = CARTESIAN_POINT('',(-1.5,-1.375,0.E+000)); +#2135 = VECTOR('',#2136,1.); +#2136 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2137 = ORIENTED_EDGE('',*,*,#2138,.T.); +#2138 = EDGE_CURVE('',#2131,#2139,#2141,.T.); +#2139 = VERTEX_POINT('',#2140); +#2140 = CARTESIAN_POINT('',(-1.5,-1.375,0.2)); +#2141 = LINE('',#2142,#2143); +#2142 = CARTESIAN_POINT('',(-1.5,-1.375,0.E+000)); +#2143 = VECTOR('',#2144,1.); +#2144 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2145 = ORIENTED_EDGE('',*,*,#2146,.T.); +#2146 = EDGE_CURVE('',#2139,#883,#2147,.T.); +#2147 = LINE('',#2148,#2149); +#2148 = CARTESIAN_POINT('',(-1.5,-1.375,0.2)); +#2149 = VECTOR('',#2150,1.); +#2150 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2151 = ORIENTED_EDGE('',*,*,#882,.F.); +#2152 = ORIENTED_EDGE('',*,*,#397,.F.); +#2153 = ORIENTED_EDGE('',*,*,#2114,.F.); +#2154 = PLANE('',#2155); +#2155 = AXIS2_PLACEMENT_3D('',#2156,#2157,#2158); +#2156 = CARTESIAN_POINT('',(-1.5,-1.375,0.E+000)); +#2157 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2158 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2159 = ADVANCED_FACE('',(#2160),#2171,.T.); +#2160 = FACE_BOUND('',#2161,.T.); +#2161 = EDGE_LOOP('',(#2162,#2163,#2164,#2165)); +#2162 = ORIENTED_EDGE('',*,*,#875,.F.); +#2163 = ORIENTED_EDGE('',*,*,#413,.T.); +#2164 = ORIENTED_EDGE('',*,*,#649,.T.); +#2165 = ORIENTED_EDGE('',*,*,#2166,.F.); +#2166 = EDGE_CURVE('',#868,#642,#2167,.T.); +#2167 = LINE('',#2168,#2169); +#2168 = CARTESIAN_POINT('',(-1.49,-1.99,0.77)); +#2169 = VECTOR('',#2170,1.); +#2170 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#2171 = PLANE('',#2172); +#2172 = AXIS2_PLACEMENT_3D('',#2173,#2174,#2175); +#2173 = CARTESIAN_POINT('',(-1.49,-1.99,2.E-002)); +#2174 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2175 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2176 = ADVANCED_FACE('',(#2177,#2183),#2194,.T.); +#2177 = FACE_BOUND('',#2178,.T.); +#2178 = EDGE_LOOP('',(#2179,#2180,#2181,#2182)); +#2179 = ORIENTED_EDGE('',*,*,#811,.F.); +#2180 = ORIENTED_EDGE('',*,*,#867,.T.); +#2181 = ORIENTED_EDGE('',*,*,#2166,.T.); +#2182 = ORIENTED_EDGE('',*,*,#641,.F.); +#2183 = FACE_BOUND('',#2184,.T.); +#2184 = EDGE_LOOP('',(#2185)); +#2185 = ORIENTED_EDGE('',*,*,#2186,.T.); +#2186 = EDGE_CURVE('',#2187,#2187,#2189,.T.); +#2187 = VERTEX_POINT('',#2188); +#2188 = CARTESIAN_POINT('',(-0.9,1.15,0.77)); +#2189 = CIRCLE('',#2190,0.25); +#2190 = AXIS2_PLACEMENT_3D('',#2191,#2192,#2193); +#2191 = CARTESIAN_POINT('',(-0.9,1.4,0.77)); +#2192 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#2193 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2194 = PLANE('',#2195); +#2195 = AXIS2_PLACEMENT_3D('',#2196,#2197,#2198); +#2196 = CARTESIAN_POINT('',(-1.49,1.99,0.77)); +#2197 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2198 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2199 = ADVANCED_FACE('',(#2200),#2211,.F.); +#2200 = FACE_BOUND('',#2201,.F.); +#2201 = EDGE_LOOP('',(#2202,#2203,#2209,#2210)); +#2202 = ORIENTED_EDGE('',*,*,#843,.F.); +#2203 = ORIENTED_EDGE('',*,*,#2204,.F.); +#2204 = EDGE_CURVE('',#1104,#836,#2205,.T.); +#2205 = LINE('',#2206,#2207); +#2206 = CARTESIAN_POINT('',(1.5,1.125,0.2)); +#2207 = VECTOR('',#2208,1.); +#2208 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2209 = ORIENTED_EDGE('',*,*,#1103,.F.); +#2210 = ORIENTED_EDGE('',*,*,#779,.T.); +#2211 = PLANE('',#2212); +#2212 = AXIS2_PLACEMENT_3D('',#2213,#2214,#2215); +#2213 = CARTESIAN_POINT('',(1.5,1.375,0.2)); +#2214 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2215 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2216 = ADVANCED_FACE('',(#2217),#2228,.F.); +#2217 = FACE_BOUND('',#2218,.F.); +#2218 = EDGE_LOOP('',(#2219,#2220,#2226,#2227)); +#2219 = ORIENTED_EDGE('',*,*,#1985,.F.); +#2220 = ORIENTED_EDGE('',*,*,#2221,.F.); +#2221 = EDGE_CURVE('',#2084,#1978,#2222,.T.); +#2222 = LINE('',#2223,#2224); +#2223 = CARTESIAN_POINT('',(1.5,-1.375,0.2)); +#2224 = VECTOR('',#2225,1.); +#2225 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2226 = ORIENTED_EDGE('',*,*,#2083,.F.); +#2227 = ORIENTED_EDGE('',*,*,#664,.T.); +#2228 = PLANE('',#2229); +#2229 = AXIS2_PLACEMENT_3D('',#2230,#2231,#2232); +#2230 = CARTESIAN_POINT('',(1.5,-1.125,0.2)); +#2231 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2232 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2233 = ADVANCED_FACE('',(#2234),#2245,.F.); +#2234 = FACE_BOUND('',#2235,.F.); +#2235 = EDGE_LOOP('',(#2236,#2237,#2243,#2244)); +#2236 = ORIENTED_EDGE('',*,*,#1201,.F.); +#2237 = ORIENTED_EDGE('',*,*,#2238,.F.); +#2238 = EDGE_CURVE('',#1300,#1194,#2239,.T.); +#2239 = LINE('',#2240,#2241); +#2240 = CARTESIAN_POINT('',(1.5,0.625,0.2)); +#2241 = VECTOR('',#2242,1.); +#2242 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2243 = ORIENTED_EDGE('',*,*,#1299,.F.); +#2244 = ORIENTED_EDGE('',*,*,#756,.T.); +#2245 = PLANE('',#2246); +#2246 = AXIS2_PLACEMENT_3D('',#2247,#2248,#2249); +#2247 = CARTESIAN_POINT('',(1.5,0.875,0.2)); +#2248 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2249 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2250 = ADVANCED_FACE('',(#2251),#2262,.F.); +#2251 = FACE_BOUND('',#2252,.F.); +#2252 = EDGE_LOOP('',(#2253,#2254,#2260,#2261)); +#2253 = ORIENTED_EDGE('',*,*,#1789,.F.); +#2254 = ORIENTED_EDGE('',*,*,#2255,.F.); +#2255 = EDGE_CURVE('',#1888,#1782,#2256,.T.); +#2256 = LINE('',#2257,#2258); +#2257 = CARTESIAN_POINT('',(1.5,-0.875,0.2)); +#2258 = VECTOR('',#2259,1.); +#2259 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2260 = ORIENTED_EDGE('',*,*,#1887,.F.); +#2261 = ORIENTED_EDGE('',*,*,#687,.T.); +#2262 = PLANE('',#2263); +#2263 = AXIS2_PLACEMENT_3D('',#2264,#2265,#2266); +#2264 = CARTESIAN_POINT('',(1.5,-0.625,0.2)); +#2265 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2266 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2267 = ADVANCED_FACE('',(#2268),#2279,.F.); +#2268 = FACE_BOUND('',#2269,.F.); +#2269 = EDGE_LOOP('',(#2270,#2271,#2277,#2278)); +#2270 = ORIENTED_EDGE('',*,*,#1397,.F.); +#2271 = ORIENTED_EDGE('',*,*,#2272,.F.); +#2272 = EDGE_CURVE('',#1496,#1390,#2273,.T.); +#2273 = LINE('',#2274,#2275); +#2274 = CARTESIAN_POINT('',(1.5,0.125,0.2)); +#2275 = VECTOR('',#2276,1.); +#2276 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2277 = ORIENTED_EDGE('',*,*,#1495,.F.); +#2278 = ORIENTED_EDGE('',*,*,#733,.T.); +#2279 = PLANE('',#2280); +#2280 = AXIS2_PLACEMENT_3D('',#2281,#2282,#2283); +#2281 = CARTESIAN_POINT('',(1.5,0.375,0.2)); +#2282 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2283 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2284 = ADVANCED_FACE('',(#2285),#2296,.F.); +#2285 = FACE_BOUND('',#2286,.F.); +#2286 = EDGE_LOOP('',(#2287,#2288,#2294,#2295)); +#2287 = ORIENTED_EDGE('',*,*,#1593,.F.); +#2288 = ORIENTED_EDGE('',*,*,#2289,.F.); +#2289 = EDGE_CURVE('',#1692,#1586,#2290,.T.); +#2290 = LINE('',#2291,#2292); +#2291 = CARTESIAN_POINT('',(1.5,-0.375,0.2)); +#2292 = VECTOR('',#2293,1.); +#2293 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2294 = ORIENTED_EDGE('',*,*,#1691,.F.); +#2295 = ORIENTED_EDGE('',*,*,#710,.T.); +#2296 = PLANE('',#2297); +#2297 = AXIS2_PLACEMENT_3D('',#2298,#2299,#2300); +#2298 = CARTESIAN_POINT('',(1.5,-0.125,0.2)); +#2299 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2300 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2301 = ADVANCED_FACE('',(#2302),#2313,.T.); +#2302 = FACE_BOUND('',#2303,.F.); +#2303 = EDGE_LOOP('',(#2304,#2305,#2306,#2307)); +#2304 = ORIENTED_EDGE('',*,*,#825,.T.); +#2305 = ORIENTED_EDGE('',*,*,#1027,.T.); +#2306 = ORIENTED_EDGE('',*,*,#1092,.T.); +#2307 = ORIENTED_EDGE('',*,*,#2308,.T.); +#2308 = EDGE_CURVE('',#1093,#826,#2309,.T.); +#2309 = LINE('',#2310,#2311); +#2310 = CARTESIAN_POINT('',(1.5,1.125,0.E+000)); +#2311 = VECTOR('',#2312,1.); +#2312 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2313 = PLANE('',#2314); +#2314 = AXIS2_PLACEMENT_3D('',#2315,#2316,#2317); +#2315 = CARTESIAN_POINT('',(1.5,1.375,0.E+000)); +#2316 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2317 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2318 = ADVANCED_FACE('',(#2319),#2325,.F.); +#2319 = FACE_BOUND('',#2320,.F.); +#2320 = EDGE_LOOP('',(#2321,#2322,#2323,#2324)); +#2321 = ORIENTED_EDGE('',*,*,#1111,.T.); +#2322 = ORIENTED_EDGE('',*,*,#2204,.T.); +#2323 = ORIENTED_EDGE('',*,*,#835,.F.); +#2324 = ORIENTED_EDGE('',*,*,#2308,.F.); +#2325 = PLANE('',#2326); +#2326 = AXIS2_PLACEMENT_3D('',#2327,#2328,#2329); +#2327 = CARTESIAN_POINT('',(1.5,1.125,0.E+000)); +#2328 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2329 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2330 = ADVANCED_FACE('',(#2331),#2342,.F.); +#2331 = FACE_BOUND('',#2332,.F.); +#2332 = EDGE_LOOP('',(#2333,#2334,#2340,#2341)); +#2333 = ORIENTED_EDGE('',*,*,#1166,.F.); +#2334 = ORIENTED_EDGE('',*,*,#2335,.F.); +#2335 = EDGE_CURVE('',#1071,#1159,#2336,.T.); +#2336 = LINE('',#2337,#2338); +#2337 = CARTESIAN_POINT('',(-1.5,1.375,0.2)); +#2338 = VECTOR('',#2339,1.); +#2339 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2340 = ORIENTED_EDGE('',*,*,#1070,.F.); +#2341 = ORIENTED_EDGE('',*,*,#1005,.F.); +#2342 = PLANE('',#2343); +#2343 = AXIS2_PLACEMENT_3D('',#2344,#2345,#2346); +#2344 = CARTESIAN_POINT('',(-1.5,1.125,0.2)); +#2345 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2346 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2347 = ADVANCED_FACE('',(#2348),#2359,.F.); +#2348 = FACE_BOUND('',#2349,.F.); +#2349 = EDGE_LOOP('',(#2350,#2351,#2357,#2358)); +#2350 = ORIENTED_EDGE('',*,*,#2146,.F.); +#2351 = ORIENTED_EDGE('',*,*,#2352,.F.); +#2352 = EDGE_CURVE('',#2051,#2139,#2353,.T.); +#2353 = LINE('',#2354,#2355); +#2354 = CARTESIAN_POINT('',(-1.5,-1.125,0.2)); +#2355 = VECTOR('',#2356,1.); +#2356 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2357 = ORIENTED_EDGE('',*,*,#2050,.F.); +#2358 = ORIENTED_EDGE('',*,*,#890,.F.); +#2359 = PLANE('',#2360); +#2360 = AXIS2_PLACEMENT_3D('',#2361,#2362,#2363); +#2361 = CARTESIAN_POINT('',(-1.5,-1.375,0.2)); +#2362 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2363 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2364 = ADVANCED_FACE('',(#2365),#2376,.F.); +#2365 = FACE_BOUND('',#2366,.F.); +#2366 = EDGE_LOOP('',(#2367,#2368,#2374,#2375)); +#2367 = ORIENTED_EDGE('',*,*,#1362,.F.); +#2368 = ORIENTED_EDGE('',*,*,#2369,.F.); +#2369 = EDGE_CURVE('',#1267,#1355,#2370,.T.); +#2370 = LINE('',#2371,#2372); +#2371 = CARTESIAN_POINT('',(-1.5,0.875,0.2)); +#2372 = VECTOR('',#2373,1.); +#2373 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2374 = ORIENTED_EDGE('',*,*,#1266,.F.); +#2375 = ORIENTED_EDGE('',*,*,#982,.F.); +#2376 = PLANE('',#2377); +#2377 = AXIS2_PLACEMENT_3D('',#2378,#2379,#2380); +#2378 = CARTESIAN_POINT('',(-1.5,0.625,0.2)); +#2379 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2380 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2381 = ADVANCED_FACE('',(#2382),#2393,.F.); +#2382 = FACE_BOUND('',#2383,.F.); +#2383 = EDGE_LOOP('',(#2384,#2385,#2391,#2392)); +#2384 = ORIENTED_EDGE('',*,*,#1950,.F.); +#2385 = ORIENTED_EDGE('',*,*,#2386,.F.); +#2386 = EDGE_CURVE('',#1855,#1943,#2387,.T.); +#2387 = LINE('',#2388,#2389); +#2388 = CARTESIAN_POINT('',(-1.5,-0.625,0.2)); +#2389 = VECTOR('',#2390,1.); +#2390 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2391 = ORIENTED_EDGE('',*,*,#1854,.F.); +#2392 = ORIENTED_EDGE('',*,*,#913,.F.); +#2393 = PLANE('',#2394); +#2394 = AXIS2_PLACEMENT_3D('',#2395,#2396,#2397); +#2395 = CARTESIAN_POINT('',(-1.5,-0.875,0.2)); +#2396 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2397 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2398 = ADVANCED_FACE('',(#2399),#2410,.F.); +#2399 = FACE_BOUND('',#2400,.F.); +#2400 = EDGE_LOOP('',(#2401,#2402,#2408,#2409)); +#2401 = ORIENTED_EDGE('',*,*,#1558,.F.); +#2402 = ORIENTED_EDGE('',*,*,#2403,.F.); +#2403 = EDGE_CURVE('',#1463,#1551,#2404,.T.); +#2404 = LINE('',#2405,#2406); +#2405 = CARTESIAN_POINT('',(-1.5,0.375,0.2)); +#2406 = VECTOR('',#2407,1.); +#2407 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2408 = ORIENTED_EDGE('',*,*,#1462,.F.); +#2409 = ORIENTED_EDGE('',*,*,#959,.F.); +#2410 = PLANE('',#2411); +#2411 = AXIS2_PLACEMENT_3D('',#2412,#2413,#2414); +#2412 = CARTESIAN_POINT('',(-1.5,0.125,0.2)); +#2413 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2414 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2415 = ADVANCED_FACE('',(#2416),#2427,.F.); +#2416 = FACE_BOUND('',#2417,.F.); +#2417 = EDGE_LOOP('',(#2418,#2419,#2425,#2426)); +#2418 = ORIENTED_EDGE('',*,*,#1754,.F.); +#2419 = ORIENTED_EDGE('',*,*,#2420,.F.); +#2420 = EDGE_CURVE('',#1659,#1747,#2421,.T.); +#2421 = LINE('',#2422,#2423); +#2422 = CARTESIAN_POINT('',(-1.5,-0.125,0.2)); +#2423 = VECTOR('',#2424,1.); +#2424 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2425 = ORIENTED_EDGE('',*,*,#1658,.F.); +#2426 = ORIENTED_EDGE('',*,*,#936,.F.); +#2427 = PLANE('',#2428); +#2428 = AXIS2_PLACEMENT_3D('',#2429,#2430,#2431); +#2429 = CARTESIAN_POINT('',(-1.5,-0.375,0.2)); +#2430 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2431 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2432 = ADVANCED_FACE('',(#2433),#2444,.T.); +#2433 = FACE_BOUND('',#2434,.F.); +#2434 = EDGE_LOOP('',(#2435,#2436,#2437,#2438)); +#2435 = ORIENTED_EDGE('',*,*,#1150,.T.); +#2436 = ORIENTED_EDGE('',*,*,#1125,.T.); +#2437 = ORIENTED_EDGE('',*,*,#1052,.T.); +#2438 = ORIENTED_EDGE('',*,*,#2439,.T.); +#2439 = EDGE_CURVE('',#1055,#1151,#2440,.T.); +#2440 = LINE('',#2441,#2442); +#2441 = CARTESIAN_POINT('',(-1.5,1.375,0.E+000)); +#2442 = VECTOR('',#2443,1.); +#2443 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2444 = PLANE('',#2445); +#2445 = AXIS2_PLACEMENT_3D('',#2446,#2447,#2448); +#2446 = CARTESIAN_POINT('',(-1.5,1.125,0.E+000)); +#2447 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2448 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2449 = ADVANCED_FACE('',(#2450),#2456,.F.); +#2450 = FACE_BOUND('',#2451,.F.); +#2451 = EDGE_LOOP('',(#2452,#2453,#2454,#2455)); +#2452 = ORIENTED_EDGE('',*,*,#1078,.T.); +#2453 = ORIENTED_EDGE('',*,*,#2335,.T.); +#2454 = ORIENTED_EDGE('',*,*,#1158,.F.); +#2455 = ORIENTED_EDGE('',*,*,#2439,.F.); +#2456 = PLANE('',#2457); +#2457 = AXIS2_PLACEMENT_3D('',#2458,#2459,#2460); +#2458 = CARTESIAN_POINT('',(-1.5,1.375,0.E+000)); +#2459 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2460 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2461 = ADVANCED_FACE('',(#2462),#2473,.T.); +#2462 = FACE_BOUND('',#2463,.F.); +#2463 = EDGE_LOOP('',(#2464,#2465,#2466,#2467)); +#2464 = ORIENTED_EDGE('',*,*,#1183,.T.); +#2465 = ORIENTED_EDGE('',*,*,#1223,.T.); +#2466 = ORIENTED_EDGE('',*,*,#1288,.T.); +#2467 = ORIENTED_EDGE('',*,*,#2468,.T.); +#2468 = EDGE_CURVE('',#1289,#1184,#2469,.T.); +#2469 = LINE('',#2470,#2471); +#2470 = CARTESIAN_POINT('',(1.5,0.625,0.E+000)); +#2471 = VECTOR('',#2472,1.); +#2472 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2473 = PLANE('',#2474); +#2474 = AXIS2_PLACEMENT_3D('',#2475,#2476,#2477); +#2475 = CARTESIAN_POINT('',(1.5,0.875,0.E+000)); +#2476 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2477 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2478 = ADVANCED_FACE('',(#2479),#2485,.F.); +#2479 = FACE_BOUND('',#2480,.F.); +#2480 = EDGE_LOOP('',(#2481,#2482,#2483,#2484)); +#2481 = ORIENTED_EDGE('',*,*,#1307,.T.); +#2482 = ORIENTED_EDGE('',*,*,#2238,.T.); +#2483 = ORIENTED_EDGE('',*,*,#1193,.F.); +#2484 = ORIENTED_EDGE('',*,*,#2468,.F.); +#2485 = PLANE('',#2486); +#2486 = AXIS2_PLACEMENT_3D('',#2487,#2488,#2489); +#2487 = CARTESIAN_POINT('',(1.5,0.625,0.E+000)); +#2488 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2489 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2490 = ADVANCED_FACE('',(#2491),#2502,.T.); +#2491 = FACE_BOUND('',#2492,.F.); +#2492 = EDGE_LOOP('',(#2493,#2494,#2495,#2496)); +#2493 = ORIENTED_EDGE('',*,*,#1346,.T.); +#2494 = ORIENTED_EDGE('',*,*,#1321,.T.); +#2495 = ORIENTED_EDGE('',*,*,#1248,.T.); +#2496 = ORIENTED_EDGE('',*,*,#2497,.T.); +#2497 = EDGE_CURVE('',#1251,#1347,#2498,.T.); +#2498 = LINE('',#2499,#2500); +#2499 = CARTESIAN_POINT('',(-1.5,0.875,0.E+000)); +#2500 = VECTOR('',#2501,1.); +#2501 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2502 = PLANE('',#2503); +#2503 = AXIS2_PLACEMENT_3D('',#2504,#2505,#2506); +#2504 = CARTESIAN_POINT('',(-1.5,0.625,0.E+000)); +#2505 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2506 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2507 = ADVANCED_FACE('',(#2508),#2514,.F.); +#2508 = FACE_BOUND('',#2509,.F.); +#2509 = EDGE_LOOP('',(#2510,#2511,#2512,#2513)); +#2510 = ORIENTED_EDGE('',*,*,#1274,.T.); +#2511 = ORIENTED_EDGE('',*,*,#2369,.T.); +#2512 = ORIENTED_EDGE('',*,*,#1354,.F.); +#2513 = ORIENTED_EDGE('',*,*,#2497,.F.); +#2514 = PLANE('',#2515); +#2515 = AXIS2_PLACEMENT_3D('',#2516,#2517,#2518); +#2516 = CARTESIAN_POINT('',(-1.5,0.875,0.E+000)); +#2517 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2518 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2519 = ADVANCED_FACE('',(#2520),#2531,.T.); +#2520 = FACE_BOUND('',#2521,.F.); +#2521 = EDGE_LOOP('',(#2522,#2523,#2524,#2525)); +#2522 = ORIENTED_EDGE('',*,*,#1379,.T.); +#2523 = ORIENTED_EDGE('',*,*,#1419,.T.); +#2524 = ORIENTED_EDGE('',*,*,#1484,.T.); +#2525 = ORIENTED_EDGE('',*,*,#2526,.T.); +#2526 = EDGE_CURVE('',#1485,#1380,#2527,.T.); +#2527 = LINE('',#2528,#2529); +#2528 = CARTESIAN_POINT('',(1.5,0.125,0.E+000)); +#2529 = VECTOR('',#2530,1.); +#2530 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2531 = PLANE('',#2532); +#2532 = AXIS2_PLACEMENT_3D('',#2533,#2534,#2535); +#2533 = CARTESIAN_POINT('',(1.5,0.375,0.E+000)); +#2534 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2535 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2536 = ADVANCED_FACE('',(#2537),#2543,.F.); +#2537 = FACE_BOUND('',#2538,.F.); +#2538 = EDGE_LOOP('',(#2539,#2540,#2541,#2542)); +#2539 = ORIENTED_EDGE('',*,*,#1503,.T.); +#2540 = ORIENTED_EDGE('',*,*,#2272,.T.); +#2541 = ORIENTED_EDGE('',*,*,#1389,.F.); +#2542 = ORIENTED_EDGE('',*,*,#2526,.F.); +#2543 = PLANE('',#2544); +#2544 = AXIS2_PLACEMENT_3D('',#2545,#2546,#2547); +#2545 = CARTESIAN_POINT('',(1.5,0.125,0.E+000)); +#2546 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2547 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2548 = ADVANCED_FACE('',(#2549),#2560,.T.); +#2549 = FACE_BOUND('',#2550,.F.); +#2550 = EDGE_LOOP('',(#2551,#2552,#2553,#2554)); +#2551 = ORIENTED_EDGE('',*,*,#1542,.T.); +#2552 = ORIENTED_EDGE('',*,*,#1517,.T.); +#2553 = ORIENTED_EDGE('',*,*,#1444,.T.); +#2554 = ORIENTED_EDGE('',*,*,#2555,.T.); +#2555 = EDGE_CURVE('',#1447,#1543,#2556,.T.); +#2556 = LINE('',#2557,#2558); +#2557 = CARTESIAN_POINT('',(-1.5,0.375,0.E+000)); +#2558 = VECTOR('',#2559,1.); +#2559 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2560 = PLANE('',#2561); +#2561 = AXIS2_PLACEMENT_3D('',#2562,#2563,#2564); +#2562 = CARTESIAN_POINT('',(-1.5,0.125,0.E+000)); +#2563 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2564 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2565 = ADVANCED_FACE('',(#2566),#2572,.F.); +#2566 = FACE_BOUND('',#2567,.F.); +#2567 = EDGE_LOOP('',(#2568,#2569,#2570,#2571)); +#2568 = ORIENTED_EDGE('',*,*,#1470,.T.); +#2569 = ORIENTED_EDGE('',*,*,#2403,.T.); +#2570 = ORIENTED_EDGE('',*,*,#1550,.F.); +#2571 = ORIENTED_EDGE('',*,*,#2555,.F.); +#2572 = PLANE('',#2573); +#2573 = AXIS2_PLACEMENT_3D('',#2574,#2575,#2576); +#2574 = CARTESIAN_POINT('',(-1.5,0.375,0.E+000)); +#2575 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2576 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2577 = ADVANCED_FACE('',(#2578),#2589,.T.); +#2578 = FACE_BOUND('',#2579,.F.); +#2579 = EDGE_LOOP('',(#2580,#2581,#2582,#2583)); +#2580 = ORIENTED_EDGE('',*,*,#1575,.T.); +#2581 = ORIENTED_EDGE('',*,*,#1615,.T.); +#2582 = ORIENTED_EDGE('',*,*,#1680,.T.); +#2583 = ORIENTED_EDGE('',*,*,#2584,.T.); +#2584 = EDGE_CURVE('',#1681,#1576,#2585,.T.); +#2585 = LINE('',#2586,#2587); +#2586 = CARTESIAN_POINT('',(1.5,-0.375,0.E+000)); +#2587 = VECTOR('',#2588,1.); +#2588 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2589 = PLANE('',#2590); +#2590 = AXIS2_PLACEMENT_3D('',#2591,#2592,#2593); +#2591 = CARTESIAN_POINT('',(1.5,-0.125,0.E+000)); +#2592 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2593 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2594 = ADVANCED_FACE('',(#2595),#2601,.F.); +#2595 = FACE_BOUND('',#2596,.F.); +#2596 = EDGE_LOOP('',(#2597,#2598,#2599,#2600)); +#2597 = ORIENTED_EDGE('',*,*,#1699,.T.); +#2598 = ORIENTED_EDGE('',*,*,#2289,.T.); +#2599 = ORIENTED_EDGE('',*,*,#1585,.F.); +#2600 = ORIENTED_EDGE('',*,*,#2584,.F.); +#2601 = PLANE('',#2602); +#2602 = AXIS2_PLACEMENT_3D('',#2603,#2604,#2605); +#2603 = CARTESIAN_POINT('',(1.5,-0.375,0.E+000)); +#2604 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2605 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2606 = ADVANCED_FACE('',(#2607),#2618,.T.); +#2607 = FACE_BOUND('',#2608,.F.); +#2608 = EDGE_LOOP('',(#2609,#2610,#2611,#2612)); +#2609 = ORIENTED_EDGE('',*,*,#1738,.T.); +#2610 = ORIENTED_EDGE('',*,*,#1713,.T.); +#2611 = ORIENTED_EDGE('',*,*,#1640,.T.); +#2612 = ORIENTED_EDGE('',*,*,#2613,.T.); +#2613 = EDGE_CURVE('',#1643,#1739,#2614,.T.); +#2614 = LINE('',#2615,#2616); +#2615 = CARTESIAN_POINT('',(-1.5,-0.125,0.E+000)); +#2616 = VECTOR('',#2617,1.); +#2617 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2618 = PLANE('',#2619); +#2619 = AXIS2_PLACEMENT_3D('',#2620,#2621,#2622); +#2620 = CARTESIAN_POINT('',(-1.5,-0.375,0.E+000)); +#2621 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2622 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2623 = ADVANCED_FACE('',(#2624),#2630,.F.); +#2624 = FACE_BOUND('',#2625,.F.); +#2625 = EDGE_LOOP('',(#2626,#2627,#2628,#2629)); +#2626 = ORIENTED_EDGE('',*,*,#1666,.T.); +#2627 = ORIENTED_EDGE('',*,*,#2420,.T.); +#2628 = ORIENTED_EDGE('',*,*,#1746,.F.); +#2629 = ORIENTED_EDGE('',*,*,#2613,.F.); +#2630 = PLANE('',#2631); +#2631 = AXIS2_PLACEMENT_3D('',#2632,#2633,#2634); +#2632 = CARTESIAN_POINT('',(-1.5,-0.125,0.E+000)); +#2633 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2634 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2635 = ADVANCED_FACE('',(#2636),#2647,.T.); +#2636 = FACE_BOUND('',#2637,.F.); +#2637 = EDGE_LOOP('',(#2638,#2639,#2640,#2641)); +#2638 = ORIENTED_EDGE('',*,*,#1771,.T.); +#2639 = ORIENTED_EDGE('',*,*,#1811,.T.); +#2640 = ORIENTED_EDGE('',*,*,#1876,.T.); +#2641 = ORIENTED_EDGE('',*,*,#2642,.T.); +#2642 = EDGE_CURVE('',#1877,#1772,#2643,.T.); +#2643 = LINE('',#2644,#2645); +#2644 = CARTESIAN_POINT('',(1.5,-0.875,0.E+000)); +#2645 = VECTOR('',#2646,1.); +#2646 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2647 = PLANE('',#2648); +#2648 = AXIS2_PLACEMENT_3D('',#2649,#2650,#2651); +#2649 = CARTESIAN_POINT('',(1.5,-0.625,0.E+000)); +#2650 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2651 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2652 = ADVANCED_FACE('',(#2653),#2659,.F.); +#2653 = FACE_BOUND('',#2654,.F.); +#2654 = EDGE_LOOP('',(#2655,#2656,#2657,#2658)); +#2655 = ORIENTED_EDGE('',*,*,#1895,.T.); +#2656 = ORIENTED_EDGE('',*,*,#2255,.T.); +#2657 = ORIENTED_EDGE('',*,*,#1781,.F.); +#2658 = ORIENTED_EDGE('',*,*,#2642,.F.); +#2659 = PLANE('',#2660); +#2660 = AXIS2_PLACEMENT_3D('',#2661,#2662,#2663); +#2661 = CARTESIAN_POINT('',(1.5,-0.875,0.E+000)); +#2662 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2663 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2664 = ADVANCED_FACE('',(#2665),#2676,.T.); +#2665 = FACE_BOUND('',#2666,.F.); +#2666 = EDGE_LOOP('',(#2667,#2668,#2669,#2670)); +#2667 = ORIENTED_EDGE('',*,*,#1934,.T.); +#2668 = ORIENTED_EDGE('',*,*,#1909,.T.); +#2669 = ORIENTED_EDGE('',*,*,#1836,.T.); +#2670 = ORIENTED_EDGE('',*,*,#2671,.T.); +#2671 = EDGE_CURVE('',#1839,#1935,#2672,.T.); +#2672 = LINE('',#2673,#2674); +#2673 = CARTESIAN_POINT('',(-1.5,-0.625,0.E+000)); +#2674 = VECTOR('',#2675,1.); +#2675 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2676 = PLANE('',#2677); +#2677 = AXIS2_PLACEMENT_3D('',#2678,#2679,#2680); +#2678 = CARTESIAN_POINT('',(-1.5,-0.875,0.E+000)); +#2679 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2680 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2681 = ADVANCED_FACE('',(#2682),#2688,.F.); +#2682 = FACE_BOUND('',#2683,.F.); +#2683 = EDGE_LOOP('',(#2684,#2685,#2686,#2687)); +#2684 = ORIENTED_EDGE('',*,*,#1862,.T.); +#2685 = ORIENTED_EDGE('',*,*,#2386,.T.); +#2686 = ORIENTED_EDGE('',*,*,#1942,.F.); +#2687 = ORIENTED_EDGE('',*,*,#2671,.F.); +#2688 = PLANE('',#2689); +#2689 = AXIS2_PLACEMENT_3D('',#2690,#2691,#2692); +#2690 = CARTESIAN_POINT('',(-1.5,-0.625,0.E+000)); +#2691 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2692 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2693 = ADVANCED_FACE('',(#2694),#2705,.T.); +#2694 = FACE_BOUND('',#2695,.F.); +#2695 = EDGE_LOOP('',(#2696,#2697,#2698,#2699)); +#2696 = ORIENTED_EDGE('',*,*,#1967,.T.); +#2697 = ORIENTED_EDGE('',*,*,#2007,.T.); +#2698 = ORIENTED_EDGE('',*,*,#2072,.T.); +#2699 = ORIENTED_EDGE('',*,*,#2700,.T.); +#2700 = EDGE_CURVE('',#2073,#1968,#2701,.T.); +#2701 = LINE('',#2702,#2703); +#2702 = CARTESIAN_POINT('',(1.5,-1.375,0.E+000)); +#2703 = VECTOR('',#2704,1.); +#2704 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2705 = PLANE('',#2706); +#2706 = AXIS2_PLACEMENT_3D('',#2707,#2708,#2709); +#2707 = CARTESIAN_POINT('',(1.5,-1.125,0.E+000)); +#2708 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2709 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#2710 = ADVANCED_FACE('',(#2711),#2717,.F.); +#2711 = FACE_BOUND('',#2712,.F.); +#2712 = EDGE_LOOP('',(#2713,#2714,#2715,#2716)); +#2713 = ORIENTED_EDGE('',*,*,#2091,.T.); +#2714 = ORIENTED_EDGE('',*,*,#2221,.T.); +#2715 = ORIENTED_EDGE('',*,*,#1977,.F.); +#2716 = ORIENTED_EDGE('',*,*,#2700,.F.); +#2717 = PLANE('',#2718); +#2718 = AXIS2_PLACEMENT_3D('',#2719,#2720,#2721); +#2719 = CARTESIAN_POINT('',(1.5,-1.375,0.E+000)); +#2720 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#2721 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#2722 = ADVANCED_FACE('',(#2723),#2734,.T.); +#2723 = FACE_BOUND('',#2724,.F.); +#2724 = EDGE_LOOP('',(#2725,#2726,#2727,#2728)); +#2725 = ORIENTED_EDGE('',*,*,#2130,.T.); +#2726 = ORIENTED_EDGE('',*,*,#2105,.T.); +#2727 = ORIENTED_EDGE('',*,*,#2032,.T.); +#2728 = ORIENTED_EDGE('',*,*,#2729,.T.); +#2729 = EDGE_CURVE('',#2035,#2131,#2730,.T.); +#2730 = LINE('',#2731,#2732); +#2731 = CARTESIAN_POINT('',(-1.5,-1.125,0.E+000)); +#2732 = VECTOR('',#2733,1.); +#2733 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2734 = PLANE('',#2735); +#2735 = AXIS2_PLACEMENT_3D('',#2736,#2737,#2738); +#2736 = CARTESIAN_POINT('',(-1.5,-1.375,0.E+000)); +#2737 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#2738 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#2739 = ADVANCED_FACE('',(#2740),#2746,.F.); +#2740 = FACE_BOUND('',#2741,.F.); +#2741 = EDGE_LOOP('',(#2742,#2743,#2744,#2745)); +#2742 = ORIENTED_EDGE('',*,*,#2058,.T.); +#2743 = ORIENTED_EDGE('',*,*,#2352,.T.); +#2744 = ORIENTED_EDGE('',*,*,#2138,.F.); +#2745 = ORIENTED_EDGE('',*,*,#2729,.F.); +#2746 = PLANE('',#2747); +#2747 = AXIS2_PLACEMENT_3D('',#2748,#2749,#2750); +#2748 = CARTESIAN_POINT('',(-1.5,-1.125,0.E+000)); +#2749 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#2750 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#2751 = ADVANCED_FACE('',(#2752),#2771,.F.); +#2752 = FACE_BOUND('',#2753,.T.); +#2753 = EDGE_LOOP('',(#2754,#2755,#2763,#2770)); +#2754 = ORIENTED_EDGE('',*,*,#2186,.F.); +#2755 = ORIENTED_EDGE('',*,*,#2756,.T.); +#2756 = EDGE_CURVE('',#2187,#2757,#2759,.T.); +#2757 = VERTEX_POINT('',#2758); +#2758 = CARTESIAN_POINT('',(-0.9,1.15,0.76)); +#2759 = LINE('',#2760,#2761); +#2760 = CARTESIAN_POINT('',(-0.9,1.15,0.78)); +#2761 = VECTOR('',#2762,1.); +#2762 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#2763 = ORIENTED_EDGE('',*,*,#2764,.F.); +#2764 = EDGE_CURVE('',#2757,#2757,#2765,.T.); +#2765 = CIRCLE('',#2766,0.25); +#2766 = AXIS2_PLACEMENT_3D('',#2767,#2768,#2769); +#2767 = CARTESIAN_POINT('',(-0.9,1.4,0.76)); +#2768 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2769 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2770 = ORIENTED_EDGE('',*,*,#2756,.F.); +#2771 = CYLINDRICAL_SURFACE('',#2772,0.25); +#2772 = AXIS2_PLACEMENT_3D('',#2773,#2774,#2775); +#2773 = CARTESIAN_POINT('',(-0.9,1.4,0.78)); +#2774 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#2775 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2776 = ADVANCED_FACE('',(#2777),#2780,.T.); +#2777 = FACE_BOUND('',#2778,.T.); +#2778 = EDGE_LOOP('',(#2779)); +#2779 = ORIENTED_EDGE('',*,*,#2764,.T.); +#2780 = PLANE('',#2781); +#2781 = AXIS2_PLACEMENT_3D('',#2782,#2783,#2784); +#2782 = CARTESIAN_POINT('',(-0.9,1.4,0.76)); +#2783 = DIRECTION('',(0.E+000,0.E+000,1.)); +#2784 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#2785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#2789)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#2786,#2787,#2788)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#2786 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#2787 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#2788 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#2789 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-007),#2786, +'distance_accuracy_value','confusion accuracy'); +#2790 = PRODUCT_TYPE('part',$,(#7)); +#2791 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( +#2792,#2800,#2807,#2814,#2821,#2828,#2835,#2843,#2850,#2857,#2864, +#2871,#2878,#2885,#2892,#2899,#2906,#2913,#2920,#2927,#2934,#2941, +#2948,#2955,#2962,#2969,#2976,#2983,#2990,#2997,#3004,#3011,#3018, +#3025,#3032,#3039,#3046,#3053,#3060,#3067,#3074,#3081,#3088,#3095, +#3102,#3109,#3116,#3123,#3130,#3137,#3144,#3151,#3158,#3165,#3172, +#3179,#3186,#3193,#3200,#3207,#3214,#3221,#3228,#3235,#3242,#3249, +#3256,#3263,#3270,#3277,#3284,#3291,#3298,#3305,#3312,#3319,#3326, +#3333,#3340,#3347,#3354,#3361,#3368,#3375,#3382,#3390),#2785); +#2792 = STYLED_ITEM('color',(#2793),#17); +#2793 = PRESENTATION_STYLE_ASSIGNMENT((#2794)); +#2794 = SURFACE_STYLE_USAGE(.BOTH.,#2795); +#2795 = SURFACE_SIDE_STYLE('',(#2796)); +#2796 = SURFACE_STYLE_FILL_AREA(#2797); +#2797 = FILL_AREA_STYLE('',(#2798)); +#2798 = FILL_AREA_STYLE_COLOUR('',#2799); +#2799 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812); +#2800 = STYLED_ITEM('color',(#2801),#65); +#2801 = PRESENTATION_STYLE_ASSIGNMENT((#2802)); +#2802 = SURFACE_STYLE_USAGE(.BOTH.,#2803); +#2803 = SURFACE_SIDE_STYLE('',(#2804)); +#2804 = SURFACE_STYLE_FILL_AREA(#2805); +#2805 = FILL_AREA_STYLE('',(#2806)); +#2806 = FILL_AREA_STYLE_COLOUR('',#2799); +#2807 = STYLED_ITEM('color',(#2808),#96); +#2808 = PRESENTATION_STYLE_ASSIGNMENT((#2809)); +#2809 = SURFACE_STYLE_USAGE(.BOTH.,#2810); +#2810 = SURFACE_SIDE_STYLE('',(#2811)); +#2811 = SURFACE_STYLE_FILL_AREA(#2812); +#2812 = FILL_AREA_STYLE('',(#2813)); +#2813 = FILL_AREA_STYLE_COLOUR('',#2799); +#2814 = STYLED_ITEM('color',(#2815),#120); +#2815 = PRESENTATION_STYLE_ASSIGNMENT((#2816)); +#2816 = SURFACE_STYLE_USAGE(.BOTH.,#2817); +#2817 = SURFACE_SIDE_STYLE('',(#2818)); +#2818 = SURFACE_STYLE_FILL_AREA(#2819); +#2819 = FILL_AREA_STYLE('',(#2820)); +#2820 = FILL_AREA_STYLE_COLOUR('',#2799); +#2821 = STYLED_ITEM('color',(#2822),#144); +#2822 = PRESENTATION_STYLE_ASSIGNMENT((#2823)); +#2823 = SURFACE_STYLE_USAGE(.BOTH.,#2824); +#2824 = SURFACE_SIDE_STYLE('',(#2825)); +#2825 = SURFACE_STYLE_FILL_AREA(#2826); +#2826 = FILL_AREA_STYLE('',(#2827)); +#2827 = FILL_AREA_STYLE_COLOUR('',#2799); +#2828 = STYLED_ITEM('color',(#2829),#168); +#2829 = PRESENTATION_STYLE_ASSIGNMENT((#2830)); +#2830 = SURFACE_STYLE_USAGE(.BOTH.,#2831); +#2831 = SURFACE_SIDE_STYLE('',(#2832)); +#2832 = SURFACE_STYLE_FILL_AREA(#2833); +#2833 = FILL_AREA_STYLE('',(#2834)); +#2834 = FILL_AREA_STYLE_COLOUR('',#2799); +#2835 = STYLED_ITEM('color',(#2836),#185); +#2836 = PRESENTATION_STYLE_ASSIGNMENT((#2837)); +#2837 = SURFACE_STYLE_USAGE(.BOTH.,#2838); +#2838 = SURFACE_SIDE_STYLE('',(#2839)); +#2839 = SURFACE_STYLE_FILL_AREA(#2840); +#2840 = FILL_AREA_STYLE('',(#2841)); +#2841 = FILL_AREA_STYLE_COLOUR('',#2842); +#2842 = COLOUR_RGB('',0.148000001907,0.144999995828,0.144999995828); +#2843 = STYLED_ITEM('color',(#2844),#628); +#2844 = PRESENTATION_STYLE_ASSIGNMENT((#2845)); +#2845 = SURFACE_STYLE_USAGE(.BOTH.,#2846); +#2846 = SURFACE_SIDE_STYLE('',(#2847)); +#2847 = SURFACE_STYLE_FILL_AREA(#2848); +#2848 = FILL_AREA_STYLE('',(#2849)); +#2849 = FILL_AREA_STYLE_COLOUR('',#2842); +#2850 = STYLED_ITEM('color',(#2851),#797); +#2851 = PRESENTATION_STYLE_ASSIGNMENT((#2852)); +#2852 = SURFACE_STYLE_USAGE(.BOTH.,#2853); +#2853 = SURFACE_SIDE_STYLE('',(#2854)); +#2854 = SURFACE_STYLE_FILL_AREA(#2855); +#2855 = FILL_AREA_STYLE('',(#2856)); +#2856 = FILL_AREA_STYLE_COLOUR('',#2842); +#2857 = STYLED_ITEM('color',(#2858),#821); +#2858 = PRESENTATION_STYLE_ASSIGNMENT((#2859)); +#2859 = SURFACE_STYLE_USAGE(.BOTH.,#2860); +#2860 = SURFACE_SIDE_STYLE('',(#2861)); +#2861 = SURFACE_STYLE_FILL_AREA(#2862); +#2862 = FILL_AREA_STYLE('',(#2863)); +#2863 = FILL_AREA_STYLE_COLOUR('',#2799); +#2864 = STYLED_ITEM('color',(#2865),#861); +#2865 = PRESENTATION_STYLE_ASSIGNMENT((#2866)); +#2866 = SURFACE_STYLE_USAGE(.BOTH.,#2867); +#2867 = SURFACE_SIDE_STYLE('',(#2868)); +#2868 = SURFACE_STYLE_FILL_AREA(#2869); +#2869 = FILL_AREA_STYLE('',(#2870)); +#2870 = FILL_AREA_STYLE_COLOUR('',#2842); +#2871 = STYLED_ITEM('color',(#2872),#1023); +#2872 = PRESENTATION_STYLE_ASSIGNMENT((#2873)); +#2873 = SURFACE_STYLE_USAGE(.BOTH.,#2874); +#2874 = SURFACE_SIDE_STYLE('',(#2875)); +#2875 = SURFACE_STYLE_FILL_AREA(#2876); +#2876 = FILL_AREA_STYLE('',(#2877)); +#2877 = FILL_AREA_STYLE_COLOUR('',#2799); +#2878 = STYLED_ITEM('color',(#2879),#1048); +#2879 = PRESENTATION_STYLE_ASSIGNMENT((#2880)); +#2880 = SURFACE_STYLE_USAGE(.BOTH.,#2881); +#2881 = SURFACE_SIDE_STYLE('',(#2882)); +#2882 = SURFACE_STYLE_FILL_AREA(#2883); +#2883 = FILL_AREA_STYLE('',(#2884)); +#2884 = FILL_AREA_STYLE_COLOUR('',#2799); +#2885 = STYLED_ITEM('color',(#2886),#1088); +#2886 = PRESENTATION_STYLE_ASSIGNMENT((#2887)); +#2887 = SURFACE_STYLE_USAGE(.BOTH.,#2888); +#2888 = SURFACE_SIDE_STYLE('',(#2889)); +#2889 = SURFACE_STYLE_FILL_AREA(#2890); +#2890 = FILL_AREA_STYLE('',(#2891)); +#2891 = FILL_AREA_STYLE_COLOUR('',#2799); +#2892 = STYLED_ITEM('color',(#2893),#1121); +#2893 = PRESENTATION_STYLE_ASSIGNMENT((#2894)); +#2894 = SURFACE_STYLE_USAGE(.BOTH.,#2895); +#2895 = SURFACE_SIDE_STYLE('',(#2896)); +#2896 = SURFACE_STYLE_FILL_AREA(#2897); +#2897 = FILL_AREA_STYLE('',(#2898)); +#2898 = FILL_AREA_STYLE_COLOUR('',#2799); +#2899 = STYLED_ITEM('color',(#2900),#1146); +#2900 = PRESENTATION_STYLE_ASSIGNMENT((#2901)); +#2901 = SURFACE_STYLE_USAGE(.BOTH.,#2902); +#2902 = SURFACE_SIDE_STYLE('',(#2903)); +#2903 = SURFACE_STYLE_FILL_AREA(#2904); +#2904 = FILL_AREA_STYLE('',(#2905)); +#2905 = FILL_AREA_STYLE_COLOUR('',#2799); +#2906 = STYLED_ITEM('color',(#2907),#1179); +#2907 = PRESENTATION_STYLE_ASSIGNMENT((#2908)); +#2908 = SURFACE_STYLE_USAGE(.BOTH.,#2909); +#2909 = SURFACE_SIDE_STYLE('',(#2910)); +#2910 = SURFACE_STYLE_FILL_AREA(#2911); +#2911 = FILL_AREA_STYLE('',(#2912)); +#2912 = FILL_AREA_STYLE_COLOUR('',#2799); +#2913 = STYLED_ITEM('color',(#2914),#1219); +#2914 = PRESENTATION_STYLE_ASSIGNMENT((#2915)); +#2915 = SURFACE_STYLE_USAGE(.BOTH.,#2916); +#2916 = SURFACE_SIDE_STYLE('',(#2917)); +#2917 = SURFACE_STYLE_FILL_AREA(#2918); +#2918 = FILL_AREA_STYLE('',(#2919)); +#2919 = FILL_AREA_STYLE_COLOUR('',#2799); +#2920 = STYLED_ITEM('color',(#2921),#1244); +#2921 = PRESENTATION_STYLE_ASSIGNMENT((#2922)); +#2922 = SURFACE_STYLE_USAGE(.BOTH.,#2923); +#2923 = SURFACE_SIDE_STYLE('',(#2924)); +#2924 = SURFACE_STYLE_FILL_AREA(#2925); +#2925 = FILL_AREA_STYLE('',(#2926)); +#2926 = FILL_AREA_STYLE_COLOUR('',#2799); +#2927 = STYLED_ITEM('color',(#2928),#1284); +#2928 = PRESENTATION_STYLE_ASSIGNMENT((#2929)); +#2929 = SURFACE_STYLE_USAGE(.BOTH.,#2930); +#2930 = SURFACE_SIDE_STYLE('',(#2931)); +#2931 = SURFACE_STYLE_FILL_AREA(#2932); +#2932 = FILL_AREA_STYLE('',(#2933)); +#2933 = FILL_AREA_STYLE_COLOUR('',#2799); +#2934 = STYLED_ITEM('color',(#2935),#1317); +#2935 = PRESENTATION_STYLE_ASSIGNMENT((#2936)); +#2936 = SURFACE_STYLE_USAGE(.BOTH.,#2937); +#2937 = SURFACE_SIDE_STYLE('',(#2938)); +#2938 = SURFACE_STYLE_FILL_AREA(#2939); +#2939 = FILL_AREA_STYLE('',(#2940)); +#2940 = FILL_AREA_STYLE_COLOUR('',#2799); +#2941 = STYLED_ITEM('color',(#2942),#1342); +#2942 = PRESENTATION_STYLE_ASSIGNMENT((#2943)); +#2943 = SURFACE_STYLE_USAGE(.BOTH.,#2944); +#2944 = SURFACE_SIDE_STYLE('',(#2945)); +#2945 = SURFACE_STYLE_FILL_AREA(#2946); +#2946 = FILL_AREA_STYLE('',(#2947)); +#2947 = FILL_AREA_STYLE_COLOUR('',#2799); +#2948 = STYLED_ITEM('color',(#2949),#1375); +#2949 = PRESENTATION_STYLE_ASSIGNMENT((#2950)); +#2950 = SURFACE_STYLE_USAGE(.BOTH.,#2951); +#2951 = SURFACE_SIDE_STYLE('',(#2952)); +#2952 = SURFACE_STYLE_FILL_AREA(#2953); +#2953 = FILL_AREA_STYLE('',(#2954)); +#2954 = FILL_AREA_STYLE_COLOUR('',#2799); +#2955 = STYLED_ITEM('color',(#2956),#1415); +#2956 = PRESENTATION_STYLE_ASSIGNMENT((#2957)); +#2957 = SURFACE_STYLE_USAGE(.BOTH.,#2958); +#2958 = SURFACE_SIDE_STYLE('',(#2959)); +#2959 = SURFACE_STYLE_FILL_AREA(#2960); +#2960 = FILL_AREA_STYLE('',(#2961)); +#2961 = FILL_AREA_STYLE_COLOUR('',#2799); +#2962 = STYLED_ITEM('color',(#2963),#1440); +#2963 = PRESENTATION_STYLE_ASSIGNMENT((#2964)); +#2964 = SURFACE_STYLE_USAGE(.BOTH.,#2965); +#2965 = SURFACE_SIDE_STYLE('',(#2966)); +#2966 = SURFACE_STYLE_FILL_AREA(#2967); +#2967 = FILL_AREA_STYLE('',(#2968)); +#2968 = FILL_AREA_STYLE_COLOUR('',#2799); +#2969 = STYLED_ITEM('color',(#2970),#1480); +#2970 = PRESENTATION_STYLE_ASSIGNMENT((#2971)); +#2971 = SURFACE_STYLE_USAGE(.BOTH.,#2972); +#2972 = SURFACE_SIDE_STYLE('',(#2973)); +#2973 = SURFACE_STYLE_FILL_AREA(#2974); +#2974 = FILL_AREA_STYLE('',(#2975)); +#2975 = FILL_AREA_STYLE_COLOUR('',#2799); +#2976 = STYLED_ITEM('color',(#2977),#1513); +#2977 = PRESENTATION_STYLE_ASSIGNMENT((#2978)); +#2978 = SURFACE_STYLE_USAGE(.BOTH.,#2979); +#2979 = SURFACE_SIDE_STYLE('',(#2980)); +#2980 = SURFACE_STYLE_FILL_AREA(#2981); +#2981 = FILL_AREA_STYLE('',(#2982)); +#2982 = FILL_AREA_STYLE_COLOUR('',#2799); +#2983 = STYLED_ITEM('color',(#2984),#1538); +#2984 = PRESENTATION_STYLE_ASSIGNMENT((#2985)); +#2985 = SURFACE_STYLE_USAGE(.BOTH.,#2986); +#2986 = SURFACE_SIDE_STYLE('',(#2987)); +#2987 = SURFACE_STYLE_FILL_AREA(#2988); +#2988 = FILL_AREA_STYLE('',(#2989)); +#2989 = FILL_AREA_STYLE_COLOUR('',#2799); +#2990 = STYLED_ITEM('color',(#2991),#1571); +#2991 = PRESENTATION_STYLE_ASSIGNMENT((#2992)); +#2992 = SURFACE_STYLE_USAGE(.BOTH.,#2993); +#2993 = SURFACE_SIDE_STYLE('',(#2994)); +#2994 = SURFACE_STYLE_FILL_AREA(#2995); +#2995 = FILL_AREA_STYLE('',(#2996)); +#2996 = FILL_AREA_STYLE_COLOUR('',#2799); +#2997 = STYLED_ITEM('color',(#2998),#1611); +#2998 = PRESENTATION_STYLE_ASSIGNMENT((#2999)); +#2999 = SURFACE_STYLE_USAGE(.BOTH.,#3000); +#3000 = SURFACE_SIDE_STYLE('',(#3001)); +#3001 = SURFACE_STYLE_FILL_AREA(#3002); +#3002 = FILL_AREA_STYLE('',(#3003)); +#3003 = FILL_AREA_STYLE_COLOUR('',#2799); +#3004 = STYLED_ITEM('color',(#3005),#1636); +#3005 = PRESENTATION_STYLE_ASSIGNMENT((#3006)); +#3006 = SURFACE_STYLE_USAGE(.BOTH.,#3007); +#3007 = SURFACE_SIDE_STYLE('',(#3008)); +#3008 = SURFACE_STYLE_FILL_AREA(#3009); +#3009 = FILL_AREA_STYLE('',(#3010)); +#3010 = FILL_AREA_STYLE_COLOUR('',#2799); +#3011 = STYLED_ITEM('color',(#3012),#1676); +#3012 = PRESENTATION_STYLE_ASSIGNMENT((#3013)); +#3013 = SURFACE_STYLE_USAGE(.BOTH.,#3014); +#3014 = SURFACE_SIDE_STYLE('',(#3015)); +#3015 = SURFACE_STYLE_FILL_AREA(#3016); +#3016 = FILL_AREA_STYLE('',(#3017)); +#3017 = FILL_AREA_STYLE_COLOUR('',#2799); +#3018 = STYLED_ITEM('color',(#3019),#1709); +#3019 = PRESENTATION_STYLE_ASSIGNMENT((#3020)); +#3020 = SURFACE_STYLE_USAGE(.BOTH.,#3021); +#3021 = SURFACE_SIDE_STYLE('',(#3022)); +#3022 = SURFACE_STYLE_FILL_AREA(#3023); +#3023 = FILL_AREA_STYLE('',(#3024)); +#3024 = FILL_AREA_STYLE_COLOUR('',#2799); +#3025 = STYLED_ITEM('color',(#3026),#1734); +#3026 = PRESENTATION_STYLE_ASSIGNMENT((#3027)); +#3027 = SURFACE_STYLE_USAGE(.BOTH.,#3028); +#3028 = SURFACE_SIDE_STYLE('',(#3029)); +#3029 = SURFACE_STYLE_FILL_AREA(#3030); +#3030 = FILL_AREA_STYLE('',(#3031)); +#3031 = FILL_AREA_STYLE_COLOUR('',#2799); +#3032 = STYLED_ITEM('color',(#3033),#1767); +#3033 = PRESENTATION_STYLE_ASSIGNMENT((#3034)); +#3034 = SURFACE_STYLE_USAGE(.BOTH.,#3035); +#3035 = SURFACE_SIDE_STYLE('',(#3036)); +#3036 = SURFACE_STYLE_FILL_AREA(#3037); +#3037 = FILL_AREA_STYLE('',(#3038)); +#3038 = FILL_AREA_STYLE_COLOUR('',#2799); +#3039 = STYLED_ITEM('color',(#3040),#1807); +#3040 = PRESENTATION_STYLE_ASSIGNMENT((#3041)); +#3041 = SURFACE_STYLE_USAGE(.BOTH.,#3042); +#3042 = SURFACE_SIDE_STYLE('',(#3043)); +#3043 = SURFACE_STYLE_FILL_AREA(#3044); +#3044 = FILL_AREA_STYLE('',(#3045)); +#3045 = FILL_AREA_STYLE_COLOUR('',#2799); +#3046 = STYLED_ITEM('color',(#3047),#1832); +#3047 = PRESENTATION_STYLE_ASSIGNMENT((#3048)); +#3048 = SURFACE_STYLE_USAGE(.BOTH.,#3049); +#3049 = SURFACE_SIDE_STYLE('',(#3050)); +#3050 = SURFACE_STYLE_FILL_AREA(#3051); +#3051 = FILL_AREA_STYLE('',(#3052)); +#3052 = FILL_AREA_STYLE_COLOUR('',#2799); +#3053 = STYLED_ITEM('color',(#3054),#1872); +#3054 = PRESENTATION_STYLE_ASSIGNMENT((#3055)); +#3055 = SURFACE_STYLE_USAGE(.BOTH.,#3056); +#3056 = SURFACE_SIDE_STYLE('',(#3057)); +#3057 = SURFACE_STYLE_FILL_AREA(#3058); +#3058 = FILL_AREA_STYLE('',(#3059)); +#3059 = FILL_AREA_STYLE_COLOUR('',#2799); +#3060 = STYLED_ITEM('color',(#3061),#1905); +#3061 = PRESENTATION_STYLE_ASSIGNMENT((#3062)); +#3062 = SURFACE_STYLE_USAGE(.BOTH.,#3063); +#3063 = SURFACE_SIDE_STYLE('',(#3064)); +#3064 = SURFACE_STYLE_FILL_AREA(#3065); +#3065 = FILL_AREA_STYLE('',(#3066)); +#3066 = FILL_AREA_STYLE_COLOUR('',#2799); +#3067 = STYLED_ITEM('color',(#3068),#1930); +#3068 = PRESENTATION_STYLE_ASSIGNMENT((#3069)); +#3069 = SURFACE_STYLE_USAGE(.BOTH.,#3070); +#3070 = SURFACE_SIDE_STYLE('',(#3071)); +#3071 = SURFACE_STYLE_FILL_AREA(#3072); +#3072 = FILL_AREA_STYLE('',(#3073)); +#3073 = FILL_AREA_STYLE_COLOUR('',#2799); +#3074 = STYLED_ITEM('color',(#3075),#1963); +#3075 = PRESENTATION_STYLE_ASSIGNMENT((#3076)); +#3076 = SURFACE_STYLE_USAGE(.BOTH.,#3077); +#3077 = SURFACE_SIDE_STYLE('',(#3078)); +#3078 = SURFACE_STYLE_FILL_AREA(#3079); +#3079 = FILL_AREA_STYLE('',(#3080)); +#3080 = FILL_AREA_STYLE_COLOUR('',#2799); +#3081 = STYLED_ITEM('color',(#3082),#2003); +#3082 = PRESENTATION_STYLE_ASSIGNMENT((#3083)); +#3083 = SURFACE_STYLE_USAGE(.BOTH.,#3084); +#3084 = SURFACE_SIDE_STYLE('',(#3085)); +#3085 = SURFACE_STYLE_FILL_AREA(#3086); +#3086 = FILL_AREA_STYLE('',(#3087)); +#3087 = FILL_AREA_STYLE_COLOUR('',#2799); +#3088 = STYLED_ITEM('color',(#3089),#2028); +#3089 = PRESENTATION_STYLE_ASSIGNMENT((#3090)); +#3090 = SURFACE_STYLE_USAGE(.BOTH.,#3091); +#3091 = SURFACE_SIDE_STYLE('',(#3092)); +#3092 = SURFACE_STYLE_FILL_AREA(#3093); +#3093 = FILL_AREA_STYLE('',(#3094)); +#3094 = FILL_AREA_STYLE_COLOUR('',#2799); +#3095 = STYLED_ITEM('color',(#3096),#2068); +#3096 = PRESENTATION_STYLE_ASSIGNMENT((#3097)); +#3097 = SURFACE_STYLE_USAGE(.BOTH.,#3098); +#3098 = SURFACE_SIDE_STYLE('',(#3099)); +#3099 = SURFACE_STYLE_FILL_AREA(#3100); +#3100 = FILL_AREA_STYLE('',(#3101)); +#3101 = FILL_AREA_STYLE_COLOUR('',#2799); +#3102 = STYLED_ITEM('color',(#3103),#2101); +#3103 = PRESENTATION_STYLE_ASSIGNMENT((#3104)); +#3104 = SURFACE_STYLE_USAGE(.BOTH.,#3105); +#3105 = SURFACE_SIDE_STYLE('',(#3106)); +#3106 = SURFACE_STYLE_FILL_AREA(#3107); +#3107 = FILL_AREA_STYLE('',(#3108)); +#3108 = FILL_AREA_STYLE_COLOUR('',#2799); +#3109 = STYLED_ITEM('color',(#3110),#2126); +#3110 = PRESENTATION_STYLE_ASSIGNMENT((#3111)); +#3111 = SURFACE_STYLE_USAGE(.BOTH.,#3112); +#3112 = SURFACE_SIDE_STYLE('',(#3113)); +#3113 = SURFACE_STYLE_FILL_AREA(#3114); +#3114 = FILL_AREA_STYLE('',(#3115)); +#3115 = FILL_AREA_STYLE_COLOUR('',#2799); +#3116 = STYLED_ITEM('color',(#3117),#2159); +#3117 = PRESENTATION_STYLE_ASSIGNMENT((#3118)); +#3118 = SURFACE_STYLE_USAGE(.BOTH.,#3119); +#3119 = SURFACE_SIDE_STYLE('',(#3120)); +#3120 = SURFACE_STYLE_FILL_AREA(#3121); +#3121 = FILL_AREA_STYLE('',(#3122)); +#3122 = FILL_AREA_STYLE_COLOUR('',#2842); +#3123 = STYLED_ITEM('color',(#3124),#2176); +#3124 = PRESENTATION_STYLE_ASSIGNMENT((#3125)); +#3125 = SURFACE_STYLE_USAGE(.BOTH.,#3126); +#3126 = SURFACE_SIDE_STYLE('',(#3127)); +#3127 = SURFACE_STYLE_FILL_AREA(#3128); +#3128 = FILL_AREA_STYLE('',(#3129)); +#3129 = FILL_AREA_STYLE_COLOUR('',#2842); +#3130 = STYLED_ITEM('color',(#3131),#2199); +#3131 = PRESENTATION_STYLE_ASSIGNMENT((#3132)); +#3132 = SURFACE_STYLE_USAGE(.BOTH.,#3133); +#3133 = SURFACE_SIDE_STYLE('',(#3134)); +#3134 = SURFACE_STYLE_FILL_AREA(#3135); +#3135 = FILL_AREA_STYLE('',(#3136)); +#3136 = FILL_AREA_STYLE_COLOUR('',#2799); +#3137 = STYLED_ITEM('color',(#3138),#2216); +#3138 = PRESENTATION_STYLE_ASSIGNMENT((#3139)); +#3139 = SURFACE_STYLE_USAGE(.BOTH.,#3140); +#3140 = SURFACE_SIDE_STYLE('',(#3141)); +#3141 = SURFACE_STYLE_FILL_AREA(#3142); +#3142 = FILL_AREA_STYLE('',(#3143)); +#3143 = FILL_AREA_STYLE_COLOUR('',#2799); +#3144 = STYLED_ITEM('color',(#3145),#2233); +#3145 = PRESENTATION_STYLE_ASSIGNMENT((#3146)); +#3146 = SURFACE_STYLE_USAGE(.BOTH.,#3147); +#3147 = SURFACE_SIDE_STYLE('',(#3148)); +#3148 = SURFACE_STYLE_FILL_AREA(#3149); +#3149 = FILL_AREA_STYLE('',(#3150)); +#3150 = FILL_AREA_STYLE_COLOUR('',#2799); +#3151 = STYLED_ITEM('color',(#3152),#2250); +#3152 = PRESENTATION_STYLE_ASSIGNMENT((#3153)); +#3153 = SURFACE_STYLE_USAGE(.BOTH.,#3154); +#3154 = SURFACE_SIDE_STYLE('',(#3155)); +#3155 = SURFACE_STYLE_FILL_AREA(#3156); +#3156 = FILL_AREA_STYLE('',(#3157)); +#3157 = FILL_AREA_STYLE_COLOUR('',#2799); +#3158 = STYLED_ITEM('color',(#3159),#2267); +#3159 = PRESENTATION_STYLE_ASSIGNMENT((#3160)); +#3160 = SURFACE_STYLE_USAGE(.BOTH.,#3161); +#3161 = SURFACE_SIDE_STYLE('',(#3162)); +#3162 = SURFACE_STYLE_FILL_AREA(#3163); +#3163 = FILL_AREA_STYLE('',(#3164)); +#3164 = FILL_AREA_STYLE_COLOUR('',#2799); +#3165 = STYLED_ITEM('color',(#3166),#2284); +#3166 = PRESENTATION_STYLE_ASSIGNMENT((#3167)); +#3167 = SURFACE_STYLE_USAGE(.BOTH.,#3168); +#3168 = SURFACE_SIDE_STYLE('',(#3169)); +#3169 = SURFACE_STYLE_FILL_AREA(#3170); +#3170 = FILL_AREA_STYLE('',(#3171)); +#3171 = FILL_AREA_STYLE_COLOUR('',#2799); +#3172 = STYLED_ITEM('color',(#3173),#2301); +#3173 = PRESENTATION_STYLE_ASSIGNMENT((#3174)); +#3174 = SURFACE_STYLE_USAGE(.BOTH.,#3175); +#3175 = SURFACE_SIDE_STYLE('',(#3176)); +#3176 = SURFACE_STYLE_FILL_AREA(#3177); +#3177 = FILL_AREA_STYLE('',(#3178)); +#3178 = FILL_AREA_STYLE_COLOUR('',#2799); +#3179 = STYLED_ITEM('color',(#3180),#2318); +#3180 = PRESENTATION_STYLE_ASSIGNMENT((#3181)); +#3181 = SURFACE_STYLE_USAGE(.BOTH.,#3182); +#3182 = SURFACE_SIDE_STYLE('',(#3183)); +#3183 = SURFACE_STYLE_FILL_AREA(#3184); +#3184 = FILL_AREA_STYLE('',(#3185)); +#3185 = FILL_AREA_STYLE_COLOUR('',#2799); +#3186 = STYLED_ITEM('color',(#3187),#2330); +#3187 = PRESENTATION_STYLE_ASSIGNMENT((#3188)); +#3188 = SURFACE_STYLE_USAGE(.BOTH.,#3189); +#3189 = SURFACE_SIDE_STYLE('',(#3190)); +#3190 = SURFACE_STYLE_FILL_AREA(#3191); +#3191 = FILL_AREA_STYLE('',(#3192)); +#3192 = FILL_AREA_STYLE_COLOUR('',#2799); +#3193 = STYLED_ITEM('color',(#3194),#2347); +#3194 = PRESENTATION_STYLE_ASSIGNMENT((#3195)); +#3195 = SURFACE_STYLE_USAGE(.BOTH.,#3196); +#3196 = SURFACE_SIDE_STYLE('',(#3197)); +#3197 = SURFACE_STYLE_FILL_AREA(#3198); +#3198 = FILL_AREA_STYLE('',(#3199)); +#3199 = FILL_AREA_STYLE_COLOUR('',#2799); +#3200 = STYLED_ITEM('color',(#3201),#2364); +#3201 = PRESENTATION_STYLE_ASSIGNMENT((#3202)); +#3202 = SURFACE_STYLE_USAGE(.BOTH.,#3203); +#3203 = SURFACE_SIDE_STYLE('',(#3204)); +#3204 = SURFACE_STYLE_FILL_AREA(#3205); +#3205 = FILL_AREA_STYLE('',(#3206)); +#3206 = FILL_AREA_STYLE_COLOUR('',#2799); +#3207 = STYLED_ITEM('color',(#3208),#2381); +#3208 = PRESENTATION_STYLE_ASSIGNMENT((#3209)); +#3209 = SURFACE_STYLE_USAGE(.BOTH.,#3210); +#3210 = SURFACE_SIDE_STYLE('',(#3211)); +#3211 = SURFACE_STYLE_FILL_AREA(#3212); +#3212 = FILL_AREA_STYLE('',(#3213)); +#3213 = FILL_AREA_STYLE_COLOUR('',#2799); +#3214 = STYLED_ITEM('color',(#3215),#2398); +#3215 = PRESENTATION_STYLE_ASSIGNMENT((#3216)); +#3216 = SURFACE_STYLE_USAGE(.BOTH.,#3217); +#3217 = SURFACE_SIDE_STYLE('',(#3218)); +#3218 = SURFACE_STYLE_FILL_AREA(#3219); +#3219 = FILL_AREA_STYLE('',(#3220)); +#3220 = FILL_AREA_STYLE_COLOUR('',#2799); +#3221 = STYLED_ITEM('color',(#3222),#2415); +#3222 = PRESENTATION_STYLE_ASSIGNMENT((#3223)); +#3223 = SURFACE_STYLE_USAGE(.BOTH.,#3224); +#3224 = SURFACE_SIDE_STYLE('',(#3225)); +#3225 = SURFACE_STYLE_FILL_AREA(#3226); +#3226 = FILL_AREA_STYLE('',(#3227)); +#3227 = FILL_AREA_STYLE_COLOUR('',#2799); +#3228 = STYLED_ITEM('color',(#3229),#2432); +#3229 = PRESENTATION_STYLE_ASSIGNMENT((#3230)); +#3230 = SURFACE_STYLE_USAGE(.BOTH.,#3231); +#3231 = SURFACE_SIDE_STYLE('',(#3232)); +#3232 = SURFACE_STYLE_FILL_AREA(#3233); +#3233 = FILL_AREA_STYLE('',(#3234)); +#3234 = FILL_AREA_STYLE_COLOUR('',#2799); +#3235 = STYLED_ITEM('color',(#3236),#2449); +#3236 = PRESENTATION_STYLE_ASSIGNMENT((#3237)); +#3237 = SURFACE_STYLE_USAGE(.BOTH.,#3238); +#3238 = SURFACE_SIDE_STYLE('',(#3239)); +#3239 = SURFACE_STYLE_FILL_AREA(#3240); +#3240 = FILL_AREA_STYLE('',(#3241)); +#3241 = FILL_AREA_STYLE_COLOUR('',#2799); +#3242 = STYLED_ITEM('color',(#3243),#2461); +#3243 = PRESENTATION_STYLE_ASSIGNMENT((#3244)); +#3244 = SURFACE_STYLE_USAGE(.BOTH.,#3245); +#3245 = SURFACE_SIDE_STYLE('',(#3246)); +#3246 = SURFACE_STYLE_FILL_AREA(#3247); +#3247 = FILL_AREA_STYLE('',(#3248)); +#3248 = FILL_AREA_STYLE_COLOUR('',#2799); +#3249 = STYLED_ITEM('color',(#3250),#2478); +#3250 = PRESENTATION_STYLE_ASSIGNMENT((#3251)); +#3251 = SURFACE_STYLE_USAGE(.BOTH.,#3252); +#3252 = SURFACE_SIDE_STYLE('',(#3253)); +#3253 = SURFACE_STYLE_FILL_AREA(#3254); +#3254 = FILL_AREA_STYLE('',(#3255)); +#3255 = FILL_AREA_STYLE_COLOUR('',#2799); +#3256 = STYLED_ITEM('color',(#3257),#2490); +#3257 = PRESENTATION_STYLE_ASSIGNMENT((#3258)); +#3258 = SURFACE_STYLE_USAGE(.BOTH.,#3259); +#3259 = SURFACE_SIDE_STYLE('',(#3260)); +#3260 = SURFACE_STYLE_FILL_AREA(#3261); +#3261 = FILL_AREA_STYLE('',(#3262)); +#3262 = FILL_AREA_STYLE_COLOUR('',#2799); +#3263 = STYLED_ITEM('color',(#3264),#2507); +#3264 = PRESENTATION_STYLE_ASSIGNMENT((#3265)); +#3265 = SURFACE_STYLE_USAGE(.BOTH.,#3266); +#3266 = SURFACE_SIDE_STYLE('',(#3267)); +#3267 = SURFACE_STYLE_FILL_AREA(#3268); +#3268 = FILL_AREA_STYLE('',(#3269)); +#3269 = FILL_AREA_STYLE_COLOUR('',#2799); +#3270 = STYLED_ITEM('color',(#3271),#2519); +#3271 = PRESENTATION_STYLE_ASSIGNMENT((#3272)); +#3272 = SURFACE_STYLE_USAGE(.BOTH.,#3273); +#3273 = SURFACE_SIDE_STYLE('',(#3274)); +#3274 = SURFACE_STYLE_FILL_AREA(#3275); +#3275 = FILL_AREA_STYLE('',(#3276)); +#3276 = FILL_AREA_STYLE_COLOUR('',#2799); +#3277 = STYLED_ITEM('color',(#3278),#2536); +#3278 = PRESENTATION_STYLE_ASSIGNMENT((#3279)); +#3279 = SURFACE_STYLE_USAGE(.BOTH.,#3280); +#3280 = SURFACE_SIDE_STYLE('',(#3281)); +#3281 = SURFACE_STYLE_FILL_AREA(#3282); +#3282 = FILL_AREA_STYLE('',(#3283)); +#3283 = FILL_AREA_STYLE_COLOUR('',#2799); +#3284 = STYLED_ITEM('color',(#3285),#2548); +#3285 = PRESENTATION_STYLE_ASSIGNMENT((#3286)); +#3286 = SURFACE_STYLE_USAGE(.BOTH.,#3287); +#3287 = SURFACE_SIDE_STYLE('',(#3288)); +#3288 = SURFACE_STYLE_FILL_AREA(#3289); +#3289 = FILL_AREA_STYLE('',(#3290)); +#3290 = FILL_AREA_STYLE_COLOUR('',#2799); +#3291 = STYLED_ITEM('color',(#3292),#2565); +#3292 = PRESENTATION_STYLE_ASSIGNMENT((#3293)); +#3293 = SURFACE_STYLE_USAGE(.BOTH.,#3294); +#3294 = SURFACE_SIDE_STYLE('',(#3295)); +#3295 = SURFACE_STYLE_FILL_AREA(#3296); +#3296 = FILL_AREA_STYLE('',(#3297)); +#3297 = FILL_AREA_STYLE_COLOUR('',#2799); +#3298 = STYLED_ITEM('color',(#3299),#2577); +#3299 = PRESENTATION_STYLE_ASSIGNMENT((#3300)); +#3300 = SURFACE_STYLE_USAGE(.BOTH.,#3301); +#3301 = SURFACE_SIDE_STYLE('',(#3302)); +#3302 = SURFACE_STYLE_FILL_AREA(#3303); +#3303 = FILL_AREA_STYLE('',(#3304)); +#3304 = FILL_AREA_STYLE_COLOUR('',#2799); +#3305 = STYLED_ITEM('color',(#3306),#2594); +#3306 = PRESENTATION_STYLE_ASSIGNMENT((#3307)); +#3307 = SURFACE_STYLE_USAGE(.BOTH.,#3308); +#3308 = SURFACE_SIDE_STYLE('',(#3309)); +#3309 = SURFACE_STYLE_FILL_AREA(#3310); +#3310 = FILL_AREA_STYLE('',(#3311)); +#3311 = FILL_AREA_STYLE_COLOUR('',#2799); +#3312 = STYLED_ITEM('color',(#3313),#2606); +#3313 = PRESENTATION_STYLE_ASSIGNMENT((#3314)); +#3314 = SURFACE_STYLE_USAGE(.BOTH.,#3315); +#3315 = SURFACE_SIDE_STYLE('',(#3316)); +#3316 = SURFACE_STYLE_FILL_AREA(#3317); +#3317 = FILL_AREA_STYLE('',(#3318)); +#3318 = FILL_AREA_STYLE_COLOUR('',#2799); +#3319 = STYLED_ITEM('color',(#3320),#2623); +#3320 = PRESENTATION_STYLE_ASSIGNMENT((#3321)); +#3321 = SURFACE_STYLE_USAGE(.BOTH.,#3322); +#3322 = SURFACE_SIDE_STYLE('',(#3323)); +#3323 = SURFACE_STYLE_FILL_AREA(#3324); +#3324 = FILL_AREA_STYLE('',(#3325)); +#3325 = FILL_AREA_STYLE_COLOUR('',#2799); +#3326 = STYLED_ITEM('color',(#3327),#2635); +#3327 = PRESENTATION_STYLE_ASSIGNMENT((#3328)); +#3328 = SURFACE_STYLE_USAGE(.BOTH.,#3329); +#3329 = SURFACE_SIDE_STYLE('',(#3330)); +#3330 = SURFACE_STYLE_FILL_AREA(#3331); +#3331 = FILL_AREA_STYLE('',(#3332)); +#3332 = FILL_AREA_STYLE_COLOUR('',#2799); +#3333 = STYLED_ITEM('color',(#3334),#2652); +#3334 = PRESENTATION_STYLE_ASSIGNMENT((#3335)); +#3335 = SURFACE_STYLE_USAGE(.BOTH.,#3336); +#3336 = SURFACE_SIDE_STYLE('',(#3337)); +#3337 = SURFACE_STYLE_FILL_AREA(#3338); +#3338 = FILL_AREA_STYLE('',(#3339)); +#3339 = FILL_AREA_STYLE_COLOUR('',#2799); +#3340 = STYLED_ITEM('color',(#3341),#2664); +#3341 = PRESENTATION_STYLE_ASSIGNMENT((#3342)); +#3342 = SURFACE_STYLE_USAGE(.BOTH.,#3343); +#3343 = SURFACE_SIDE_STYLE('',(#3344)); +#3344 = SURFACE_STYLE_FILL_AREA(#3345); +#3345 = FILL_AREA_STYLE('',(#3346)); +#3346 = FILL_AREA_STYLE_COLOUR('',#2799); +#3347 = STYLED_ITEM('color',(#3348),#2681); +#3348 = PRESENTATION_STYLE_ASSIGNMENT((#3349)); +#3349 = SURFACE_STYLE_USAGE(.BOTH.,#3350); +#3350 = SURFACE_SIDE_STYLE('',(#3351)); +#3351 = SURFACE_STYLE_FILL_AREA(#3352); +#3352 = FILL_AREA_STYLE('',(#3353)); +#3353 = FILL_AREA_STYLE_COLOUR('',#2799); +#3354 = STYLED_ITEM('color',(#3355),#2693); +#3355 = PRESENTATION_STYLE_ASSIGNMENT((#3356)); +#3356 = SURFACE_STYLE_USAGE(.BOTH.,#3357); +#3357 = SURFACE_SIDE_STYLE('',(#3358)); +#3358 = SURFACE_STYLE_FILL_AREA(#3359); +#3359 = FILL_AREA_STYLE('',(#3360)); +#3360 = FILL_AREA_STYLE_COLOUR('',#2799); +#3361 = STYLED_ITEM('color',(#3362),#2710); +#3362 = PRESENTATION_STYLE_ASSIGNMENT((#3363)); +#3363 = SURFACE_STYLE_USAGE(.BOTH.,#3364); +#3364 = SURFACE_SIDE_STYLE('',(#3365)); +#3365 = SURFACE_STYLE_FILL_AREA(#3366); +#3366 = FILL_AREA_STYLE('',(#3367)); +#3367 = FILL_AREA_STYLE_COLOUR('',#2799); +#3368 = STYLED_ITEM('color',(#3369),#2722); +#3369 = PRESENTATION_STYLE_ASSIGNMENT((#3370)); +#3370 = SURFACE_STYLE_USAGE(.BOTH.,#3371); +#3371 = SURFACE_SIDE_STYLE('',(#3372)); +#3372 = SURFACE_STYLE_FILL_AREA(#3373); +#3373 = FILL_AREA_STYLE('',(#3374)); +#3374 = FILL_AREA_STYLE_COLOUR('',#2799); +#3375 = STYLED_ITEM('color',(#3376),#2739); +#3376 = PRESENTATION_STYLE_ASSIGNMENT((#3377)); +#3377 = SURFACE_STYLE_USAGE(.BOTH.,#3378); +#3378 = SURFACE_SIDE_STYLE('',(#3379)); +#3379 = SURFACE_STYLE_FILL_AREA(#3380); +#3380 = FILL_AREA_STYLE('',(#3381)); +#3381 = FILL_AREA_STYLE_COLOUR('',#2799); +#3382 = STYLED_ITEM('color',(#3383),#2751); +#3383 = PRESENTATION_STYLE_ASSIGNMENT((#3384)); +#3384 = SURFACE_STYLE_USAGE(.BOTH.,#3385); +#3385 = SURFACE_SIDE_STYLE('',(#3386)); +#3386 = SURFACE_STYLE_FILL_AREA(#3387); +#3387 = FILL_AREA_STYLE('',(#3388)); +#3388 = FILL_AREA_STYLE_COLOUR('',#3389); +#3389 = COLOUR_RGB('',0.690999984741,0.663999974728,0.597999989986); +#3390 = STYLED_ITEM('color',(#3391),#2776); +#3391 = PRESENTATION_STYLE_ASSIGNMENT((#3392)); +#3392 = SURFACE_STYLE_USAGE(.BOTH.,#3393); +#3393 = SURFACE_SIDE_STYLE('',(#3394)); +#3394 = SURFACE_STYLE_FILL_AREA(#3395); +#3395 = FILL_AREA_STYLE('',(#3396)); +#3396 = FILL_AREA_STYLE_COLOUR('',#3389); +ENDSEC; +END-ISO-10303-21;
package.jsonadded+224@@ -0,0 +1,224 @@+{+ "slug": "ltc2801ide-pbf",+ "version": "0.1.0",+ "type": "component",+ "description": "Analog Devices RS232 ICs, DFN-12-EP(3x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "communication interface chip-uart-485-232",+ "ltc2801ide#pbf",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ltc2801ide-pbf.kicad_sym",+ "ltc2801ide-pbf.kicad_mod",+ "ltc2801ide-pbf.glb",+ "ltc2801ide-pbf.step",+ "ltc2801ide-pbf.lbr",+ "docs/hero.png",+ "docs/ltc2801ide-pbf-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ltc2801ide-pbf-hero.glb",+ "ltc2801ide-pbf-hero.overlay.json",+ "ltc2801ide-pbf-etched.glb"+ ],+ "component": {+ "mpn": "LTC2801IDE#PBF",+ "manufacturer": "Analog Devices",+ "package": "DFN-12-EP(3x4)",+ "pin_count": 13,+ "category": "Communication Interface Chip/UART/485/232",+ "subcategory": "RS232 ICs",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590144529857601536",+ "parts": {+ "symbol": "ltc2801ide-pbf.kicad_sym",+ "footprint": "ltc2801ide-pbf.kicad_mod",+ "model_3d": "ltc2801ide-pbf-hero.glb",+ "model_3d_plain": "ltc2801ide-pbf-etched.glb",+ "model_3d_step": "ltc2801ide-pbf-etched.step",+ "model_3d_step_plain": "ltc2801ide-pbf.step",+ "lbr": "ltc2801ide-pbf.lbr"+ },+ "distributor_links": {+ "lcsc": "C580599",+ "digikey": "LTC2801IDE#PBF-ND",+ "mouser": "584-LTC2801IDE#PBF"+ },+ "distributor_check": {+ "checked_at": "2026-10-21T00:51:36Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "LTC2801IDE#PBF-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "584-LTC2801IDE#PBF",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "RIN",+ "type": "input",+ "description": "RS-232 receiver input with an internal 5kΩ termination resistor, rated for -25V to 25V absolute maximum."+ },+ {+ "number": "2",+ "name": "TOUT",+ "type": "output",+ "description": "RS-232 driver output, which can be shorted to ground or driven up to ±15V without damage (absolute maximum -15V to 15V)."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_in",+ "description": "Input supply pin for 1.8V to 5.5V operation, to be bypassed to GND with a 1µF capacitor."+ },+ {+ "number": "4",+ "name": "VDD",+ "type": "power_out",+ "description": "Generated positive supply for the RS-232 driver, regulated to 7V, with a 1µF capacitor connected between VDD and GND."+ },+ {+ "number": "5",+ "name": "SW",+ "type": "passive",+ "description": "Switch pin of the DC-DC converter, which connects to a 10µH inductor between SW and VCC."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "7",+ "name": "CAP",+ "type": "passive",+ "description": "Charge-pump capacitor for the generated negative supply, with a 220nF capacitor connected between CAP and SW."+ },+ {+ "number": "8",+ "name": "PS",+ "type": "input",+ "description": "Power supply control pin, referenced to VL, that enables the integrated DC-DC converter (absolute maximum -0.3V to VL + 0.3V)."+ },+ {+ "number": "9",+ "name": "MODE",+ "type": "input",+ "description": "Mode control pin, referenced to VL, that selects the operating mode per Table 1 (absolute maximum -0.3V to 7V)."+ },+ {+ "number": "10",+ "name": "VL",+ "type": "power_in",+ "description": "Logic supply for the receiver outputs, driver inputs and control inputs, operating from 1.8V to 5.5V and bypassed with 220nF if not tied to VCC."+ },+ {+ "number": "11",+ "name": "TIN",+ "type": "input",+ "description": "Driver input referenced to VL (absolute maximum -0.3V to 7V)."+ },+ {+ "number": "12",+ "name": "ROUT",+ "type": "output",+ "description": "Receiver output referenced to VL, short-circuit protected to GND, VCC and VL, and high impedance in Shutdown mode."+ },+ {+ "number": "13",+ "name": "VEE",+ "type": "power_out",+ "description": "Generated negative supply for the RS-232 driver, regulated to -6.3V, with a 1µF capacitor between VEE and GND; this is also the exposed backside thermal pad, which must be soldered to the PCB."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin 13 is VEE and also the exposed backside thermal pad. The datasheet lists it as '13*' with a back; The pin-number-to-name assignments come from the Pin Functions table (2801 column), not from the TOP; The datasheet covers the family, and the DE (12-lead DFN) package is the only one for LTC2801. The o"+ ],+ "pages_sent": 18,+ "cost_usd": 0.0981,+ "at": "2026-10-21T00:47:48"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590144529857601536",+ "pages": 18,+ "sha256": "e9ad4ef1183d2db6",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 13,+ "described": 13,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ltc2801ide-pbf.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.0,+ 3.98,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "845020e85b5efd5390cabe9ebf6f19225aa2620525cfa849c1d3e9ca94a4ee1d",+ "checked": "2026-10-21",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ltc2801ide-pbf-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.0,+ 3.98,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "15acd30b9d74782cc4192497e7787920e79c535f0bd99daa2083c2e3f458d8d5",+ "checked": "2026-10-21",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+230@@ -0,0 +1,230 @@+{+ "slug": "ltc2801ide-pbf",+ "version": "0.1.0",+ "type": "component",+ "description": "Analog Devices RS232 ICs, DFN-12-EP(3x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "communication interface chip-uart-485-232",+ "ltc2801ide#pbf",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ltc2801ide-pbf.kicad_sym",+ "ltc2801ide-pbf.kicad_mod",+ "ltc2801ide-pbf.glb",+ "ltc2801ide-pbf.step",+ "ltc2801ide-pbf.lbr",+ "docs/hero.png",+ "docs/ltc2801ide-pbf-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ltc2801ide-pbf-hero.glb",+ "ltc2801ide-pbf-hero.overlay.json",+ "ltc2801ide-pbf-etched.glb"+ ],+ "component": {+ "mpn": "LTC2801IDE#PBF",+ "manufacturer": "Analog Devices",+ "package": "DFN-12-EP(3x4)",+ "pin_count": 13,+ "category": "Communication Interface Chip/UART/485/232",+ "subcategory": "RS232 ICs",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590144529857601536",+ "parts": {+ "symbol": "ltc2801ide-pbf.kicad_sym",+ "footprint": "ltc2801ide-pbf.kicad_mod",+ "model_3d": "ltc2801ide-pbf-hero.glb",+ "model_3d_plain": "ltc2801ide-pbf-etched.glb",+ "model_3d_step": "ltc2801ide-pbf-etched.step",+ "model_3d_step_plain": "ltc2801ide-pbf.step",+ "lbr": "ltc2801ide-pbf.lbr"+ },+ "distributor_links": {+ "lcsc": "C580599",+ "digikey": "LTC2801IDE#PBF-ND",+ "mouser": "584-LTC2801IDE#PBF"+ },+ "distributor_check": {+ "checked_at": "2026-10-21T00:51:36Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "LTC2801IDE#PBF-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "584-LTC2801IDE#PBF",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "RIN",+ "type": "input",+ "description": "RS-232 receiver input with an internal 5kΩ termination resistor, rated for -25V to 25V absolute maximum."+ },+ {+ "number": "2",+ "name": "TOUT",+ "type": "output",+ "description": "RS-232 driver output, which can be shorted to ground or driven up to ±15V without damage (absolute maximum -15V to 15V)."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_in",+ "description": "Input supply pin for 1.8V to 5.5V operation, to be bypassed to GND with a 1µF capacitor."+ },+ {+ "number": "4",+ "name": "VDD",+ "type": "power_out",+ "description": "Generated positive supply for the RS-232 driver, regulated to 7V, with a 1µF capacitor connected between VDD and GND."+ },+ {+ "number": "5",+ "name": "SW",+ "type": "passive",+ "description": "Switch pin of the DC-DC converter, which connects to a 10µH inductor between SW and VCC."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "7",+ "name": "CAP",+ "type": "passive",+ "description": "Charge-pump capacitor for the generated negative supply, with a 220nF capacitor connected between CAP and SW."+ },+ {+ "number": "8",+ "name": "PS",+ "type": "input",+ "description": "Power supply control pin, referenced to VL, that enables the integrated DC-DC converter (absolute maximum -0.3V to VL + 0.3V)."+ },+ {+ "number": "9",+ "name": "MODE",+ "type": "input",+ "description": "Mode control pin, referenced to VL, that selects the operating mode per Table 1 (absolute maximum -0.3V to 7V)."+ },+ {+ "number": "10",+ "name": "VL",+ "type": "power_in",+ "description": "Logic supply for the receiver outputs, driver inputs and control inputs, operating from 1.8V to 5.5V and bypassed with 220nF if not tied to VCC."+ },+ {+ "number": "11",+ "name": "TIN",+ "type": "input",+ "description": "Driver input referenced to VL (absolute maximum -0.3V to 7V)."+ },+ {+ "number": "12",+ "name": "ROUT",+ "type": "output",+ "description": "Receiver output referenced to VL, short-circuit protected to GND, VCC and VL, and high impedance in Shutdown mode."+ },+ {+ "number": "13",+ "name": "VEE",+ "type": "power_out",+ "description": "Generated negative supply for the RS-232 driver, regulated to -6.3V, with a 1µF capacitor between VEE and GND; this is also the exposed backside thermal pad, which must be soldered to the PCB."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin 13 is VEE and also the exposed backside thermal pad. The datasheet lists it as '13*' with a back; The pin-number-to-name assignments come from the Pin Functions table (2801 column), not from the TOP; The datasheet covers the family, and the DE (12-lead DFN) package is the only one for LTC2801. The o"+ ],+ "pages_sent": 18,+ "cost_usd": 0.0981,+ "at": "2026-10-21T00:47:48"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590144529857601536",+ "pages": 18,+ "sha256": "e9ad4ef1183d2db6",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 13,+ "described": 13,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ltc2801ide-pbf.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 3.98,+ 0.77+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "845020e85b5efd5390cabe9ebf6f19225aa2620525cfa849c1d3e9ca94a4ee1d",+ "checked": "2026-10-21",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ltc2801ide-pbf-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 3.98,+ 0.77+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "15acd30b9d74782cc4192497e7787920e79c535f0bd99daa2083c2e3f458d8d5",+ "checked": "2026-10-21",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>ltc2801ide-pbf</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>ltc2801ide-pbf</title>