← Commit history
Publish 0.1.1
4 files changed
+477−11
ltc2411cms-trpbf-hero.glbadded⋯ 1 unchanged line ⋯
ltc2411cms-trpbf-hero.overlay.jsonadded+304@@ -0,0 +1,304 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LTC2411CMS#TRPBF",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 10,+ "span_mm": 5.7,+ "dash_mm": 0.1425,+ "gap_mm": 0.0855,+ "pad_stroke_mm": 0.0342+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 10,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.456,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -2.45,+ 2.45,+ -1.125,+ 1.125+ ],+ "pads_bbox_mm": [+ -2.85,+ 2.85,+ -1.175,+ 1.175+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "ltc2411cms-trpbf-etched.glb",+ "glb_sha256": "6e819c505cf61c55cddc1a8e418a3bdfd500cb3bb319603ce2f957b3ed90f1e6",+ "footprint": "ltc2411cms-trpbf.kicad_mod",+ "footprint_sha256": "c179dbee33613027667b07b4dba02648f193fc65f63616c9d73d6f1162c6bb9d",+ "pins": "page.json component.pins",+ "pins_sha256": "0622cdf79c2a4f2829c1051c1552b1bc0a4e8700642777d60f56020fe96f0e9f"+ },+ "generator": "adom-wiki 1.8.31 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "VCC",+ "x": -2.95,+ "y": -1.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "2",+ "text": "REF+",+ "x": -2.95,+ "y": -0.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "3",+ "text": "REF-",+ "x": -2.95,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "4",+ "text": "IN+",+ "x": -2.95,+ "y": 0.5,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "5",+ "text": "IN-",+ "x": -2.95,+ "y": 1.0,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "6",+ "text": "GND",+ "x": 2.95,+ "y": 1.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "7",+ "text": "CS",+ "x": 2.95,+ "y": 0.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "8",+ "text": "SDO",+ "x": 2.95,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "9",+ "text": "SCK",+ "x": 2.95,+ "y": -0.5,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "10",+ "text": "FO",+ "x": 2.95,+ "y": -1.0,+ "align": "left",+ "vertical": false,+ "h": 0.25+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.1,+ -1.0+ ],+ "size_mm": [+ 1.5,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.1,+ -0.5+ ],+ "size_mm": [+ 1.5,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.1,+ 0.0+ ],+ "size_mm": [+ 1.5,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.1,+ 0.5+ ],+ "size_mm": [+ 1.5,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -2.1,+ 1.0+ ],+ "size_mm": [+ 1.5,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.1,+ 1.0+ ],+ "size_mm": [+ 1.5,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.1,+ 0.5+ ],+ "size_mm": [+ 1.5,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.1,+ 0.0+ ],+ "size_mm": [+ 1.5,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ 2.1,+ -0.5+ ],+ "size_mm": [+ 1.5,+ 0.35+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ 2.1,+ -1.0+ ],+ "size_mm": [+ 1.5,+ 0.35+ ],+ "rot": 0.0+ }+ ]+}
package.json+163−4@@ -1,6 +1,6 @@ { "slug": "ltc2411cms-trpbf",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Analog Devices Analog To Digital Converters (ADC), MSOP-10. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,165 @@ "docs/hero.png", "docs/ltc2411cms-trpbf-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "ltc2411cms-trpbf-etched.step",+ "ltc2411cms-trpbf-hero.glb",+ "ltc2411cms-trpbf-hero.overlay.json"+ ],+ "component": {+ "mpn": "LTC2411CMS#TRPBF",+ "manufacturer": "Analog Devices",+ "package": "MSOP-10",+ "pin_count": 10,+ "category": "Data Acquisition",+ "subcategory": "Analog To Digital Converters (ADC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885698287423488",+ "parts": {+ "symbol": "ltc2411cms-trpbf.kicad_sym",+ "footprint": "ltc2411cms-trpbf.kicad_mod",+ "model_3d": "ltc2411cms-trpbf-hero.glb",+ "model_3d_plain": "ltc2411cms-trpbf.glb",+ "model_3d_step": "ltc2411cms-trpbf-etched.step",+ "model_3d_step_plain": "ltc2411cms-trpbf.step",+ "lbr": "ltc2411cms-trpbf.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply voltage input, 2.7V to 5.5V. Bypass to GND with 1uF ceramic (and optionally a 10uF tantalum in parallel) placed close to the pin."+ },+ {+ "number": "2",+ "name": "REF+",+ "type": "input",+ "description": "Positive reference input. Absolute/common-mode voltage range 0.1V to VCC. Differential reference VREF = REF+ - REF- must be within 0.1V to VCC."+ },+ {+ "number": "3",+ "name": "REF-",+ "type": "input",+ "description": "Negative reference input. Absolute/common-mode voltage range GND to (VCC - 0.1V). Sets the low reference rail for the differential VREF used by the delta-sigma converter."+ },+ {+ "number": "4",+ "name": "IN+",+ "type": "input",+ "description": "Positive differential analog input. Absolute range (GND - 0.3V) to (VCC + 0.3V); differential input range VIN = IN+ - IN- is -VREF/2 to +VREF/2. Sampling capacitance ~6pF."+ },+ {+ "number": "5",+ "name": "IN-",+ "type": "input",+ "description": "Negative differential analog input. Absolute range (GND - 0.3V) to (VCC + 0.3V); pairs with IN+ to form the fully differential input. Sampling capacitance ~6pF."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground. Provide a low-impedance return path; all voltages in the datasheet are referenced to this pin."+ },+ {+ "number": "7",+ "name": "CS",+ "type": "input",+ "description": "Active-low chip select / conversion control input. CS low enables SDO and initiates data output; CS high tri-states SDO and (with FO tied to GND or VCC) puts the part into Sleep Mode. VIH >= 2.5V (VCC >= 2.7V), VIL <= 0.6V."+ },+ {+ "number": "8",+ "name": "SDO",+ "type": "tri_state",+ "description": "Three-state serial data output. Drives the 32-bit conversion result MSB-first, clocked out on SCK falling edges. High-Z when CS is high; VOH >= VCC - 0.5V at -800uA, VOL <= 0.4V at 1.6mA."+ },+ {+ "number": "9",+ "name": "SCK",+ "type": "bidirectional",+ "description": "Bidirectional serial clock for the SPI/MICROWIRE data output interface. Configured as an input in external-SCK mode (up to 2MHz) or as a push-pull output in internal-SCK mode (~19.2kHz on LTC2411, ~17.5kHz on LTC2411-1). Mode is selected automatically by the state of SCK when CS falls."+ },+ {+ "number": "10",+ "name": "FO",+ "type": "input",+ "description": "Frequency / notch-filter select and external oscillator input. On LTC2411: FO = GND selects internal oscillator with 60Hz notch, FO = VCC selects 50Hz notch, or drive with an external 2.56kHz-500kHz clock to set the user-defined notch. On LTC2411-1: FO = GND or VCC selects simultaneous 50/60Hz rejection with the internal oscillator; external clock override is also supported."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885698287423488",+ "pages": 42,+ "sha256": "a40f75661e44ecab",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 10,+ "described": 10,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ltc2411cms-trpbf.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ltc2411cms-trpbf-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "f8c36b491339876d7c9a7188a8ec493b9e28c60cbf55e8a8da49b790841ea266",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "LTC2411CMS#TRPBF",+ "brief": "Analog Devices Analog To Digital Converters (ADC), MSOP-10. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "Analog Devices",+ "Package": "MSOP-10",+ "Category": "Data Acquisition",+ "Pins": "10"+ }+ },+ "discovery_triggers": [+ "ltc2411cms#trpbf"+ ],+ "discovery_pitch": "LTC2411CMS#TRPBF (Analog Devices) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+10−7@@ -4,7 +4,7 @@ "slug": "ltc2411cms-trpbf", "title": "LTC2411CMS#TRPBF", "brief": "Analog Devices Analog To Digital Converters (ADC), MSOP-10. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -224,10 +224,13 @@ "docs/hero.png", "docs/ltc2411cms-trpbf-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "ltc2411cms-trpbf-etched.step",+ "ltc2411cms-trpbf-hero.glb",+ "ltc2411cms-trpbf-hero.overlay.json" ],- "visibility": {- "public": true- },- "updated_at": "2026-09-28T18:14:06.300Z"-}+ "visibility": "public",+ "updated_at": "2026-09-28T18:14:06.300Z",+ "description": "Analog Devices Analog To Digital Converters (ADC), MSOP-10. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}