component
LT3094EMSE#TRPBF
Public Made by Adomby adom
Analog Devices Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, MSOP-12-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+5754
README.md+49docs/hero.pngdocs/lt3094emse-trpbf-datasheet.pdflt3094emse-trpbf-etched.glblt3094emse-trpbf-hero.glblt3094emse-trpbf-hero.overlay.json+361lt3094emse-trpbf.glblt3094emse-trpbf.kicad_mod+355lt3094emse-trpbf.kicad_sym+65lt3094emse-trpbf.lbr+145lt3094emse-trpbf.step+4323package.json+224page.json+230viewers/footprint.html+1viewers/symbol.html+1README.mdadded+49@@ -0,0 +1,49 @@+# LT3094EMSE#TRPBF++**Analog Devices** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · MSOP-12-EP++LT3094EMSE#TRPBF from Analog Devices, in a MSOP-12-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | power_in | Input supply pin that powers the regulator and requires a bypass capacitor, with a 10µF input capacitor generally sufficing for a nearby battery or supply. |+| 2 | IN | power_in | Input supply pin that powers the regulator and requires a bypass capacitor, with a 10µF input capacitor generally sufficing for a nearby battery or supply. |+| 3 | EN/UV | bidirectional | Enable/UVLO pin that shuts the part down when pulled low, turns on above 1.26V (200mV falling hysteresis) or below -1.26V (215mV hysteresis), and must not be floated (tie to IN if unused). |+| 4 | PG | output | Open-collector power-good flag that pulls low when PGFB is between 0V and -300mV, and may be left floating if power good is not needed. |+| 5 | PGFB | input | Power-good feedback input with a -300mV rising trip point and 7mV hysteresis that also activates fast start-up; tie to IN if power good and fast start-up are not used. |+| 6 | ILIM | input | Current-limit programming pin where a resistor to GND sets the limit with a nominal 3.75A·kΩ scale factor, must not be floated, and should be Kelvin connected to GND for accuracy (tie to GND if unused). |+| 7 | VIOC | output | Voltage-for-input-to-output-control amplifier output that drives an upstream regulator feedback node, sinks at least 100µA, and may be left floating if unused. |+| 8 | SET | input | Inverting error-amplifier input that sinks a precision 100µA through the external resistor to GND, setting VOUT = ISET·RSET over a 0V to -19.5V output range. |+| 9 | GND | power_in | Ground reference pin for the regulator. |+| 10 | OUTS | input | Output-sense noninverting error-amplifier input that should be Kelvin connected to the output capacitor and load, and must not be driven more than 0.3V below IN. |+| 11 | OUT | power_out | Regulator output that supplies the load and requires a minimum 10µF output capacitor with ESR below 30mΩ and ESL below 1.5nH; it must not be driven more than 0.3V below IN. |+| 12 | OUT | power_out | Regulator output that supplies the load and requires a minimum 10µF output capacitor with ESR below 30mΩ and ESL below 1.5nH; it must not be driven more than 0.3V below IN. |+| 13 | IN | power_in | Exposed pad, internally connected to IN, that must be soldered to the PCB. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Analog Devices |+| Package | MSOP-12-EP |+| Category | Power Management (PMIC) |+| Pins | 13 |++## CAD (KiCad official)++- Symbol: `LT3094EMSE#TRPBF`+- Footprint: `Package_SO:MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm`+- 3D model: MSOP-12-EP (KiCad packages3D, STEP)+- 3D model files: `lt3094emse-trpbf-etched.step` / `lt3094emse-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt3094emse-trpbf.step` / `lt3094emse-trpbf.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908161260523520) (34 pp, sha256 `c82438ca3359a588`, retrieved 2026-10-13, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lt3094emse-trpbf-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/lt3094emse-trpbf-datasheet.pdfadded⋯ 1 unchanged line ⋯
lt3094emse-trpbf-etched.glbadded⋯ 1 unchanged line ⋯
lt3094emse-trpbf-hero.glbadded⋯ 1 unchanged line ⋯
lt3094emse-trpbf-hero.overlay.jsonadded+361@@ -0,0 +1,361 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LT3094EMSE#TRPBF",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 13,+ "span_mm": 6.095,+ "dash_mm": 0.1524,+ "gap_mm": 0.0914,+ "pad_stroke_mm": 0.0366+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 12,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.46,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -2.45,+ 2.45,+ -1.775,+ 1.775+ ],+ "pads_bbox_mm": [+ -2.875,+ 2.875,+ -1.825,+ 1.825+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "lt3094emse-trpbf-etched.glb",+ "glb_sha256": "7ba15253fed2ee301590469e7eb3866cedc1a2650347c9cadf104265cb284b1e",+ "footprint": "lt3094emse-trpbf.kicad_mod",+ "footprint_sha256": "78ba6fd34a0cc6ccc32c84cd33600650f725319781efbe605a8380d8f4273041",+ "pins": "page.json component.pins",+ "pins_sha256": "fa54fdc30cc077d47544a1826e7ab71fd4523a745675c472e3f850aef392dfef"+ },+ "generator": "adom-wiki 1.7.71 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "IN",+ "x": -2.975,+ "y": -1.625,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "IN",+ "x": -2.975,+ "y": -0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "EN/UV",+ "x": -2.975,+ "y": -0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "PG",+ "x": -2.975,+ "y": 0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "PGFB",+ "x": -2.975,+ "y": 0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "ILIM",+ "x": -2.975,+ "y": 1.625,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "VIOC",+ "x": 2.975,+ "y": 1.625,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "SET",+ "x": 2.975,+ "y": 0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "9",+ "text": "GND",+ "x": 2.975,+ "y": 0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "10",+ "text": "OUTS",+ "x": 2.975,+ "y": -0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "11",+ "text": "OUT",+ "x": 2.975,+ "y": -0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "12",+ "text": "OUT",+ "x": 2.975,+ "y": -1.625,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ -1.625+ ],+ "size_mm": [+ 1.45,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ -0.975+ ],+ "size_mm": [+ 1.45,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ -0.325+ ],+ "size_mm": [+ 1.45,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ 0.325+ ],+ "size_mm": [+ 1.45,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ 0.975+ ],+ "size_mm": [+ 1.45,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -2.15,+ 1.625+ ],+ "size_mm": [+ 1.45,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ 1.625+ ],+ "size_mm": [+ 1.45,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ 0.975+ ],+ "size_mm": [+ 1.45,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ 0.325+ ],+ "size_mm": [+ 1.45,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ -0.325+ ],+ "size_mm": [+ 1.45,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ -0.975+ ],+ "size_mm": [+ 1.45,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ 2.15,+ -1.625+ ],+ "size_mm": [+ 1.45,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 1.651,+ 2.845+ ],+ "rot": 0.0+ }+ ]+}
lt3094emse-trpbf.glbadded⋯ 1 unchanged line ⋯
lt3094emse-trpbf.kicad_modadded+355@@ -0,0 +1,355 @@+(footprint "MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "MSOP, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081666_g_mse12.pdf)")+ (tags "MSOP SO")+ (property "Reference" "REF**"+ (at 0 -2.97 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm"+ (at 0 2.97 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/gullwing"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -1.61 -2.1295)+ (end 1.61 -2.1295)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -1.61 -2.085)+ (end -1.61 -2.1295)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -1.61 2.1295)+ (end -1.61 2.085)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 1.61 -2.1295)+ (end 1.61 -2.085)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 1.61 2.085)+ (end 1.61 2.1295)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 1.61 2.1295)+ (end -1.61 2.1295)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -2.16 -2.09)+ (xy -2.4 -2.42)+ (xy -1.92 -2.42)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_line+ (start -3.13 -2.08)+ (end -1.75 -2.08)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -3.13 2.08)+ (end -3.13 -2.08)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.75 -2.27)+ (end 1.75 -2.27)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.75 -2.08)+ (end -1.75 -2.27)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.75 2.08)+ (end -3.13 2.08)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.75 2.27)+ (end -1.75 2.08)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 1.75 -2.27)+ (end 1.75 -2.08)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 1.75 -2.08)+ (end 3.13 -2.08)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 1.75 2.08)+ (end 1.75 2.27)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 1.75 2.27)+ (end -1.75 2.27)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.13 -2.08)+ (end 3.13 2.08)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.13 2.08)+ (end 1.75 2.08)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_poly+ (pts+ (xy -0.75 -2.0195)+ (xy 1.5 -2.0195)+ (xy 1.5 2.0195)+ (xy -1.5 2.0195)+ (xy -1.5 -1.2695)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 90)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "" smd roundrect+ (at -0.415 -0.71)+ (size 0.67 1.15)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at -0.415 0.71)+ (size 0.67 1.15)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at 0.415 -0.71)+ (size 0.67 1.15)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at 0.415 0.71)+ (size 0.67 1.15)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "1" smd roundrect+ (at -2.15 -1.625)+ (size 1.45 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "2" smd roundrect+ (at -2.15 -0.975)+ (size 1.45 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "3" smd roundrect+ (at -2.15 -0.325)+ (size 1.45 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "4" smd roundrect+ (at -2.15 0.325)+ (size 1.45 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "5" smd roundrect+ (at -2.15 0.975)+ (size 1.45 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "6" smd roundrect+ (at -2.15 1.625)+ (size 1.45 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "7" smd roundrect+ (at 2.15 1.625)+ (size 1.45 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "8" smd roundrect+ (at 2.15 0.975)+ (size 1.45 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "9" smd roundrect+ (at 2.15 0.325)+ (size 1.45 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "10" smd roundrect+ (at 2.15 -0.325)+ (size 1.45 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "11" smd roundrect+ (at 2.15 -0.975)+ (size 1.45 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "12" smd roundrect+ (at 2.15 -1.625)+ (size 1.45 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "13" smd rect+ (at 0 0)+ (size 1.651 2.845)+ (property pad_prop_heatsink)+ (layers "F.Cu" "F.Mask")+ (zone_connect 2)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
lt3094emse-trpbf.kicad_symadded+65@@ -0,0 +1,65 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "LT3094EMSE#TRPBF" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 12.70 0) (effects (font (size 1.27 1.27))))+ (property "Value" "LT3094EMSE#TRPBF" (at 0 -12.70 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "LT3094EMSE#TRPBF_0_1"+ (rectangle (start -12.70 10.16) (end 12.70 -10.16)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "LT3094EMSE#TRPBF_1_1"+ (pin power_in line (at -17.78 7.62 0) (length 5.08)+ (name "IN" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 5.08 0) (length 5.08)+ (name "IN" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 2.54 0) (length 5.08)+ (name "EN/UV" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 0.00 0) (length 5.08)+ (name "PG" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -2.54 0) (length 5.08)+ (name "PGFB" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -5.08 0) (length 5.08)+ (name "ILIM" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -7.62 0) (length 5.08)+ (name "VIOC" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 5.08 180) (length 5.08)+ (name "IN" (effects (font (size 1.27 1.27))))+ (number "13" (effects (font (size 1.27 1.27))))+ )+ (pin power_out line (at 17.78 2.54 180) (length 5.08)+ (name "OUT" (effects (font (size 1.27 1.27))))+ (number "12" (effects (font (size 1.27 1.27))))+ )+ (pin power_out line (at 17.78 0.00 180) (length 5.08)+ (name "OUT" (effects (font (size 1.27 1.27))))+ (number "11" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -2.54 180) (length 5.08)+ (name "OUTS" (effects (font (size 1.27 1.27))))+ (number "10" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -5.08 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -7.62 180) (length 5.08)+ (name "SET" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
lt3094emse-trpbf.lbradded+145@@ -0,0 +1,145 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm">+ <description>MSOP-12-1EP, 3 x 4.039 mm, 0.65 mm pitch</description>+ <smd name="1" x="-2.1500" y="1.6250" dx="1.4500" dy="0.4000" layer="1" roundness="50"/>+ <smd name="2" x="-2.1500" y="0.9750" dx="1.4500" dy="0.4000" layer="1" roundness="50"/>+ <smd name="3" x="-2.1500" y="0.3250" dx="1.4500" dy="0.4000" layer="1" roundness="50"/>+ <smd name="4" x="-2.1500" y="-0.3250" dx="1.4500" dy="0.4000" layer="1" roundness="50"/>+ <smd name="5" x="-2.1500" y="-0.9750" dx="1.4500" dy="0.4000" layer="1" roundness="50"/>+ <smd name="6" x="-2.1500" y="-1.6250" dx="1.4500" dy="0.4000" layer="1" roundness="50"/>+ <smd name="7" x="2.1500" y="-1.6250" dx="1.4500" dy="0.4000" layer="1" roundness="50"/>+ <smd name="8" x="2.1500" y="-0.9750" dx="1.4500" dy="0.4000" layer="1" roundness="50"/>+ <smd name="9" x="2.1500" y="-0.3250" dx="1.4500" dy="0.4000" layer="1" roundness="50"/>+ <smd name="10" x="2.1500" y="0.3250" dx="1.4500" dy="0.4000" layer="1" roundness="50"/>+ <smd name="11" x="2.1500" y="0.9750" dx="1.4500" dy="0.4000" layer="1" roundness="50"/>+ <smd name="12" x="2.1500" y="1.6250" dx="1.4500" dy="0.4000" layer="1" roundness="50"/>+ <smd name="13" x="0.0000" y="-0.0000" dx="1.6510" dy="2.8450" layer="1" cream="no"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-2.1600" y="2.0900"/>+ <vertex x="-2.4000" y="2.4200"/>+ <vertex x="-1.9200" y="2.4200"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.7500" y="2.0195"/>+ <vertex x="1.5000" y="2.0195"/>+ <vertex x="1.5000" y="-2.0195"/>+ <vertex x="-1.5000" y="-2.0195"/>+ <vertex x="-1.5000" y="1.2695"/>+ </polygon>+ <wire x1="-1.6100" y1="2.1295" x2="1.6100" y2="2.1295" width="0.1200" layer="21"/>+ <wire x1="-1.6100" y1="2.0850" x2="-1.6100" y2="2.1295" width="0.1200" layer="21"/>+ <wire x1="-1.6100" y1="-2.1295" x2="-1.6100" y2="-2.0850" width="0.1200" layer="21"/>+ <wire x1="1.6100" y1="2.1295" x2="1.6100" y2="2.0850" width="0.1200" layer="21"/>+ <wire x1="1.6100" y1="-2.0850" x2="1.6100" y2="-2.1295" width="0.1200" layer="21"/>+ <wire x1="1.6100" y1="-2.1295" x2="-1.6100" y2="-2.1295" width="0.1200" layer="21"/>+ <text x="0" y="2.950" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-2.950" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="LT3094EMSE#TRPBF">+ <wire x1="-12.7" y1="10.16" x2="12.7" y2="10.16" width="0.254" layer="94"/>+ <wire x1="12.7" y1="10.16" x2="12.7" y2="-10.16" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-10.16" x2="-12.7" y2="-10.16" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-10.16" x2="-12.7" y2="10.16" width="0.254" layer="94"/>+ <text x="0.0000" y="12.7000" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-12.7000" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="IN" x="-17.78" y="7.62" length="middle" direction="pwr"/>+ <pin name="IN@2" x="-17.78" y="5.08" length="middle" direction="pwr"/>+ <pin name="EN/UV" x="-17.78" y="2.54" length="middle" direction="io"/>+ <pin name="PG" x="-17.78" y="0" length="middle" direction="out"/>+ <pin name="PGFB" x="-17.78" y="-2.54" length="middle" direction="in"/>+ <pin name="ILIM" x="-17.78" y="-5.08" length="middle" direction="in"/>+ <pin name="VIOC" x="-17.78" y="-7.62" length="middle" direction="out"/>+ <pin name="IN@3" x="17.78" y="5.08" length="middle" direction="pwr" rot="R180"/>+ <pin name="OUT" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>+ <pin name="OUT@2" x="17.78" y="0" length="middle" direction="out" rot="R180"/>+ <pin name="OUTS" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/>+ <pin name="GND" x="17.78" y="-5.08" length="middle" direction="pwr" rot="R180"/>+ <pin name="SET" x="17.78" y="-7.62" length="middle" direction="in" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="LT3094EMSE#TRPBF" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="LT3094EMSE#TRPBF" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm">+ <connects>+ <connect gate="G$1" pin="IN" pad="1"/>+ <connect gate="G$1" pin="IN@2" pad="2"/>+ <connect gate="G$1" pin="EN/UV" pad="3"/>+ <connect gate="G$1" pin="PG" pad="4"/>+ <connect gate="G$1" pin="PGFB" pad="5"/>+ <connect gate="G$1" pin="ILIM" pad="6"/>+ <connect gate="G$1" pin="VIOC" pad="7"/>+ <connect gate="G$1" pin="IN@3" pad="13"/>+ <connect gate="G$1" pin="OUT" pad="12"/>+ <connect gate="G$1" pin="OUT@2" pad="11"/>+ <connect gate="G$1" pin="OUTS" pad="10"/>+ <connect gate="G$1" pin="GND" pad="9"/>+ <connect gate="G$1" pin="SET" pad="8"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
lt3094emse-trpbf.stepadded+4323@@ -0,0 +1,4323 @@+ISO-10303-21;+HEADER;+/* MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm','MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#4034);+#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12=CARTESIAN_POINT('',(0.,0.,0.));+#13=DIRECTION('',(0.,0.,1.));+#14=DIRECTION('',(1.,0.,-0.));+#15=MANIFOLD_SOLID_BREP('',#16);+#16=CLOSED_SHELL('',(#17,#43,#119,#133,#152,#166,#228,#290,#304,#318,#328,#348,#363,#376,#385,#400,#464,#475,#493,#518,#536,#557,#575,#596,#614,#635,#653,#674,#692,#713,#723,#735,#756,#774,#795,#813,#834,#852,#873,#891,#912,#930,#951,#968,#983,#998,#1009,#1016,#1040,#1102,#1116,#1130,#1144,#1206,#1226,#1257,#1328,#1346,#1399,#1410,#1470,#1487,#1540,#1551,#1611,#1628,#1681,#1692,#1752,#1769,#1822,#1833,#1893,#1910,#1963,#1971,#2029,#2046,#2094,#2159,#2175,#2223,#2233,#2293,#2309,#2362,#2373,#2433,#2449,#2502,#2513,#2573,#2589,#2642,#2653,#2713,#2729,#2782,#2793,#2853,#2869,#2920,#2930,#2942,#2954,#2966,#2978,#2990,#3019,#3028,#3040,#3052,#3064,#3076,#3088,#3097,#3107,#3114,#3124,#3135,#3145,#3155,#3165,#3175,#3185,#3194,#3204,#3214,#3224,#3234,#3244,#3254,#3264,#3272,#3282,#3292,#3302,#3312,#3322,#3332,#3342,#3350,#3360,#3370,#3380,#3390,#3400,#3410,#3420,#3428,#3438,#3448,#3458,#3468,#3478,#3488,#3498,#3506,#3516,#3526,#3536,#3546,#3556,#3566,#3574,#3585,#3594,#3604,#3614,#3624,#3634,#3643,#3653,#3663,#3672,#3682,#3692,#3702,#3712,#3720,#3730,#3740,#3749,#3759,#3769,#3779,#3789,#3797,#3807,#3817,#3826,#3836,#3846,#3856,#3866,#3874,#3884,#3894,#3903,#3913,#3923,#3933,#3943,#3951,#3961,#3971,#3980,#3990,#4000,#4010,#4020,#4028));+#17=ADVANCED_FACE('',(#18),#42,.F.);+#18=FACE_BOUND('',#19,.F.);+#19=EDGE_LOOP('',(#20,#29,#34,#39));+#20=ORIENTED_EDGE('',*,*,#21,.T.);+#21=EDGE_CURVE('',#22,#24,#26,.T.);+#22=VERTEX_POINT('',#23);+#23=CARTESIAN_POINT('',(-1.29489677592,1.948293551841,0.1));+#24=VERTEX_POINT('',#25);+#25=CARTESIAN_POINT('',(1.29489677592,1.948293551841,0.1));+#26=LINE('',#23,#27);+#27=VECTOR('',#28,1.);+#28=DIRECTION('',(1.,1.110223024625E-16,0.));+#29=ORIENTED_EDGE('',*,*,#30,.T.);+#30=EDGE_CURVE('',#24,#31,#33,.T.);+#31=VERTEX_POINT('',#32);+#32=CARTESIAN_POINT('',(1.3305,2.0195,0.435));+#33=B_SPLINE_CURVE_WITH_KNOTS('',1,(#25,#32),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#34=ORIENTED_EDGE('',*,*,#35,.F.);+#35=EDGE_CURVE('',#36,#31,#38,.T.);+#36=VERTEX_POINT('',#37);+#37=CARTESIAN_POINT('',(-1.3305,2.0195,0.435));+#38=LINE('',#37,#27);+#39=ORIENTED_EDGE('',*,*,#40,.F.);+#40=EDGE_CURVE('',#22,#36,#41,.T.);+#41=B_SPLINE_CURVE_WITH_KNOTS('',1,(#23,#37),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#42=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#23,#37),(#25,#32)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.661),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#43=ADVANCED_FACE('',(#44,#94),#116,.F.);+#44=FACE_BOUND('',#45,.F.);+#45=EDGE_LOOP('',(#46,#47,#54,#61,#68,#75,#82,#89));+#46=ORIENTED_EDGE('',*,*,#21,.F.);+#47=ORIENTED_EDGE('',*,*,#48,.F.);+#48=EDGE_CURVE('',#49,#22,#51,.T.);+#49=VERTEX_POINT('',#50);+#50=CARTESIAN_POINT('',(-1.428793551841,1.81439677592,0.1));+#51=LINE('',#50,#52);+#52=VECTOR('',#53,1.);+#53=DIRECTION('',(0.707106781187,0.707106781187,0.));+#54=ORIENTED_EDGE('',*,*,#55,.F.);+#55=EDGE_CURVE('',#56,#49,#58,.T.);+#56=VERTEX_POINT('',#57);+#57=CARTESIAN_POINT('',(-1.428793551841,-1.81439677592,0.1));+#58=LINE('',#57,#59);+#59=VECTOR('',#60,1.);+#60=DIRECTION('',(-1.110223024625E-16,1.,0.));+#61=ORIENTED_EDGE('',*,*,#62,.F.);+#62=EDGE_CURVE('',#63,#56,#65,.T.);+#63=VERTEX_POINT('',#64);+#64=CARTESIAN_POINT('',(-1.29489677592,-1.948293551841,0.1));+#65=LINE('',#64,#66);+#66=VECTOR('',#67,1.);+#67=DIRECTION('',(-0.707106781187,0.707106781187,0.));+#68=ORIENTED_EDGE('',*,*,#69,.F.);+#69=EDGE_CURVE('',#70,#63,#72,.T.);+#70=VERTEX_POINT('',#71);+#71=CARTESIAN_POINT('',(1.29489677592,-1.948293551841,0.1));+#72=LINE('',#71,#73);+#73=VECTOR('',#74,1.);+#74=DIRECTION('',(-1.,-1.110223024625E-16,0.));+#75=ORIENTED_EDGE('',*,*,#76,.F.);+#76=EDGE_CURVE('',#77,#70,#79,.T.);+#77=VERTEX_POINT('',#78);+#78=CARTESIAN_POINT('',(1.428793551841,-1.81439677592,0.1));+#79=LINE('',#78,#80);+#80=VECTOR('',#81,1.);+#81=DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#82=ORIENTED_EDGE('',*,*,#83,.F.);+#83=EDGE_CURVE('',#84,#77,#86,.T.);+#84=VERTEX_POINT('',#85);+#85=CARTESIAN_POINT('',(1.428793551841,1.81439677592,0.1));+#86=LINE('',#85,#87);+#87=VECTOR('',#88,1.);+#88=DIRECTION('',(1.110223024625E-16,-1.,0.));+#89=ORIENTED_EDGE('',*,*,#90,.F.);+#90=EDGE_CURVE('',#24,#84,#91,.T.);+#91=LINE('',#25,#92);+#92=VECTOR('',#93,1.);+#93=DIRECTION('',(0.707106781187,-0.707106781187,0.));+#94=FACE_BOUND('',#95,.F.);+#95=EDGE_LOOP('',(#96,#103,#108,#113));+#96=ORIENTED_EDGE('',*,*,#97,.T.);+#97=EDGE_CURVE('',#98,#100,#102,.T.);+#98=VERTEX_POINT('',#99);+#99=CARTESIAN_POINT('',(-0.8255,1.4225,0.1));+#100=VERTEX_POINT('',#101);+#101=CARTESIAN_POINT('',(0.8255,1.4225,0.1));+#102=LINE('',#99,#27);+#103=ORIENTED_EDGE('',*,*,#104,.T.);+#104=EDGE_CURVE('',#100,#105,#107,.T.);+#105=VERTEX_POINT('',#106);+#106=CARTESIAN_POINT('',(0.8255,-1.4225,0.1));+#107=LINE('',#101,#87);+#108=ORIENTED_EDGE('',*,*,#109,.F.);+#109=EDGE_CURVE('',#110,#105,#112,.T.);+#110=VERTEX_POINT('',#111);+#111=CARTESIAN_POINT('',(-0.8255,-1.4225,0.1));+#112=LINE('',#111,#27);+#113=ORIENTED_EDGE('',*,*,#114,.F.);+#114=EDGE_CURVE('',#98,#110,#115,.T.);+#115=LINE('',#99,#87);+#116=PLANE('',#117);+#117=AXIS2_PLACEMENT_3D('',#23,#13,#118);+#118=DIRECTION('',(0.553526071449,-0.832831848711,0.));+#119=ADVANCED_FACE('',(#120),#132,.F.);+#120=FACE_BOUND('',#121,.F.);+#121=EDGE_LOOP('',(#122,#123,#128,#131));+#122=ORIENTED_EDGE('',*,*,#90,.T.);+#123=ORIENTED_EDGE('',*,*,#124,.T.);+#124=EDGE_CURVE('',#84,#125,#127,.T.);+#125=VERTEX_POINT('',#126);+#126=CARTESIAN_POINT('',(1.5,1.85,0.435));+#127=B_SPLINE_CURVE_WITH_KNOTS('',1,(#85,#126),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#128=ORIENTED_EDGE('',*,*,#129,.F.);+#129=EDGE_CURVE('',#31,#125,#130,.T.);+#130=LINE('',#32,#92);+#131=ORIENTED_EDGE('',*,*,#30,.F.);+#132=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#25,#32),(#85,#126)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.239709198822),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#133=ADVANCED_FACE('',(#134),#150,.F.);+#134=FACE_BOUND('',#135,.F.);+#135=EDGE_LOOP('',(#136,#137,#142,#147));+#136=ORIENTED_EDGE('',*,*,#35,.T.);+#137=ORIENTED_EDGE('',*,*,#138,.T.);+#138=EDGE_CURVE('',#31,#139,#141,.T.);+#139=VERTEX_POINT('',#140);+#140=CARTESIAN_POINT('',(1.3305,2.0195,0.615));+#141=B_SPLINE_CURVE_WITH_KNOTS('',1,(#32,#140),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#142=ORIENTED_EDGE('',*,*,#143,.F.);+#143=EDGE_CURVE('',#144,#139,#146,.T.);+#144=VERTEX_POINT('',#145);+#145=CARTESIAN_POINT('',(-1.3305,2.0195,0.615));+#146=LINE('',#145,#27);+#147=ORIENTED_EDGE('',*,*,#148,.F.);+#148=EDGE_CURVE('',#36,#144,#149,.T.);+#149=B_SPLINE_CURVE_WITH_KNOTS('',1,(#37,#145),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#150=PLANE('',#151);+#151=AXIS2_PLACEMENT_3D('',#145,#88,#28);+#152=ADVANCED_FACE('',(#153),#165,.F.);+#153=FACE_BOUND('',#154,.F.);+#154=EDGE_LOOP('',(#155,#156,#157,#162));+#155=ORIENTED_EDGE('',*,*,#48,.T.);+#156=ORIENTED_EDGE('',*,*,#40,.T.);+#157=ORIENTED_EDGE('',*,*,#158,.F.);+#158=EDGE_CURVE('',#159,#36,#161,.T.);+#159=VERTEX_POINT('',#160);+#160=CARTESIAN_POINT('',(-1.5,1.85,0.435));+#161=LINE('',#160,#52);+#162=ORIENTED_EDGE('',*,*,#163,.F.);+#163=EDGE_CURVE('',#49,#159,#164,.T.);+#164=B_SPLINE_CURVE_WITH_KNOTS('',1,(#50,#160),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#165=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#50,#160),(#23,#37)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.239709198822),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#166=ADVANCED_FACE('',(#167),#227,.F.);+#167=FACE_BOUND('',#168,.F.);+#168=EDGE_LOOP('',(#169,#170,#171,#177,#181,#185,#189,#193,#197,#201,#205,#209,#213,#217,#221,#224));+#169=ORIENTED_EDGE('',*,*,#55,.T.);+#170=ORIENTED_EDGE('',*,*,#163,.T.);+#171=ORIENTED_EDGE('',*,*,#172,.F.);+#172=EDGE_CURVE('',#173,#159,#175,.T.);+#173=VERTEX_POINT('',#174);+#174=CARTESIAN_POINT('',(-1.5,1.775,0.435));+#175=LINE('',#176,#59);+#176=CARTESIAN_POINT('',(-1.5,-1.85,0.435));+#177=ORIENTED_EDGE('',*,*,#178,.F.);+#178=EDGE_CURVE('',#179,#173,#175,.T.);+#179=VERTEX_POINT('',#180);+#180=CARTESIAN_POINT('',(-1.5,1.475,0.435));+#181=ORIENTED_EDGE('',*,*,#182,.F.);+#182=EDGE_CURVE('',#183,#179,#175,.T.);+#183=VERTEX_POINT('',#184);+#184=CARTESIAN_POINT('',(-1.5,1.125,0.435));+#185=ORIENTED_EDGE('',*,*,#186,.F.);+#186=EDGE_CURVE('',#187,#183,#175,.T.);+#187=VERTEX_POINT('',#188);+#188=CARTESIAN_POINT('',(-1.5,0.825,0.435));+#189=ORIENTED_EDGE('',*,*,#190,.F.);+#190=EDGE_CURVE('',#191,#187,#175,.T.);+#191=VERTEX_POINT('',#192);+#192=CARTESIAN_POINT('',(-1.5,0.475,0.435));+#193=ORIENTED_EDGE('',*,*,#194,.F.);+#194=EDGE_CURVE('',#195,#191,#175,.T.);+#195=VERTEX_POINT('',#196);+#196=CARTESIAN_POINT('',(-1.5,0.175,0.435));+#197=ORIENTED_EDGE('',*,*,#198,.F.);+#198=EDGE_CURVE('',#199,#195,#175,.T.);+#199=VERTEX_POINT('',#200);+#200=CARTESIAN_POINT('',(-1.5,-0.175,0.435));+#201=ORIENTED_EDGE('',*,*,#202,.F.);+#202=EDGE_CURVE('',#203,#199,#175,.T.);+#203=VERTEX_POINT('',#204);+#204=CARTESIAN_POINT('',(-1.5,-0.475,0.435));+#205=ORIENTED_EDGE('',*,*,#206,.F.);+#206=EDGE_CURVE('',#207,#203,#175,.T.);+#207=VERTEX_POINT('',#208);+#208=CARTESIAN_POINT('',(-1.5,-0.825,0.435));+#209=ORIENTED_EDGE('',*,*,#210,.F.);+#210=EDGE_CURVE('',#211,#207,#175,.T.);+#211=VERTEX_POINT('',#212);+#212=CARTESIAN_POINT('',(-1.5,-1.125,0.435));+#213=ORIENTED_EDGE('',*,*,#214,.F.);+#214=EDGE_CURVE('',#215,#211,#175,.T.);+#215=VERTEX_POINT('',#216);+#216=CARTESIAN_POINT('',(-1.5,-1.475,0.435));+#217=ORIENTED_EDGE('',*,*,#218,.F.);+#218=EDGE_CURVE('',#219,#215,#175,.T.);+#219=VERTEX_POINT('',#220);+#220=CARTESIAN_POINT('',(-1.5,-1.775,0.435));+#221=ORIENTED_EDGE('',*,*,#222,.F.);+#222=EDGE_CURVE('',#223,#219,#175,.T.);+#223=VERTEX_POINT('',#176);+#224=ORIENTED_EDGE('',*,*,#225,.F.);+#225=EDGE_CURVE('',#56,#223,#226,.T.);+#226=B_SPLINE_CURVE_WITH_KNOTS('',1,(#57,#176),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#227=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#57,#176),(#50,#160)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.7),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#228=ADVANCED_FACE('',(#229),#289,.F.);+#229=FACE_BOUND('',#230,.F.);+#230=EDGE_LOOP('',(#231,#232,#237,#242,#246,#250,#254,#258,#262,#266,#270,#274,#278,#282,#286,#288));+#231=ORIENTED_EDGE('',*,*,#83,.T.);+#232=ORIENTED_EDGE('',*,*,#233,.T.);+#233=EDGE_CURVE('',#77,#234,#236,.T.);+#234=VERTEX_POINT('',#235);+#235=CARTESIAN_POINT('',(1.5,-1.85,0.435));+#236=B_SPLINE_CURVE_WITH_KNOTS('',1,(#78,#235),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#237=ORIENTED_EDGE('',*,*,#238,.F.);+#238=EDGE_CURVE('',#239,#234,#241,.T.);+#239=VERTEX_POINT('',#240);+#240=CARTESIAN_POINT('',(1.5,-1.775,0.435));+#241=LINE('',#126,#87);+#242=ORIENTED_EDGE('',*,*,#243,.F.);+#243=EDGE_CURVE('',#244,#239,#241,.T.);+#244=VERTEX_POINT('',#245);+#245=CARTESIAN_POINT('',(1.5,-1.475,0.435));+#246=ORIENTED_EDGE('',*,*,#247,.F.);+#247=EDGE_CURVE('',#248,#244,#241,.T.);+#248=VERTEX_POINT('',#249);+#249=CARTESIAN_POINT('',(1.5,-1.125,0.435));+#250=ORIENTED_EDGE('',*,*,#251,.F.);+#251=EDGE_CURVE('',#252,#248,#241,.T.);+#252=VERTEX_POINT('',#253);+#253=CARTESIAN_POINT('',(1.5,-0.825,0.435));+#254=ORIENTED_EDGE('',*,*,#255,.F.);+#255=EDGE_CURVE('',#256,#252,#241,.T.);+#256=VERTEX_POINT('',#257);+#257=CARTESIAN_POINT('',(1.5,-0.475,0.435));+#258=ORIENTED_EDGE('',*,*,#259,.F.);+#259=EDGE_CURVE('',#260,#256,#241,.T.);+#260=VERTEX_POINT('',#261);+#261=CARTESIAN_POINT('',(1.5,-0.175,0.435));+#262=ORIENTED_EDGE('',*,*,#263,.F.);+#263=EDGE_CURVE('',#264,#260,#241,.T.);+#264=VERTEX_POINT('',#265);+#265=CARTESIAN_POINT('',(1.5,0.175,0.435));+#266=ORIENTED_EDGE('',*,*,#267,.F.);+#267=EDGE_CURVE('',#268,#264,#241,.T.);+#268=VERTEX_POINT('',#269);+#269=CARTESIAN_POINT('',(1.5,0.475,0.435));+#270=ORIENTED_EDGE('',*,*,#271,.F.);+#271=EDGE_CURVE('',#272,#268,#241,.T.);+#272=VERTEX_POINT('',#273);+#273=CARTESIAN_POINT('',(1.5,0.825,0.435));+#274=ORIENTED_EDGE('',*,*,#275,.F.);+#275=EDGE_CURVE('',#276,#272,#241,.T.);+#276=VERTEX_POINT('',#277);+#277=CARTESIAN_POINT('',(1.5,1.125,0.435));+#278=ORIENTED_EDGE('',*,*,#279,.F.);+#279=EDGE_CURVE('',#280,#276,#241,.T.);+#280=VERTEX_POINT('',#281);+#281=CARTESIAN_POINT('',(1.5,1.475,0.435));+#282=ORIENTED_EDGE('',*,*,#283,.F.);+#283=EDGE_CURVE('',#284,#280,#241,.T.);+#284=VERTEX_POINT('',#285);+#285=CARTESIAN_POINT('',(1.5,1.775,0.435));+#286=ORIENTED_EDGE('',*,*,#287,.F.);+#287=EDGE_CURVE('',#125,#284,#241,.T.);+#288=ORIENTED_EDGE('',*,*,#124,.F.);+#289=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#85,#126),(#78,#235)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.7),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#290=ADVANCED_FACE('',(#291),#303,.F.);+#291=FACE_BOUND('',#292,.F.);+#292=EDGE_LOOP('',(#293,#294,#295,#300));+#293=ORIENTED_EDGE('',*,*,#62,.T.);+#294=ORIENTED_EDGE('',*,*,#225,.T.);+#295=ORIENTED_EDGE('',*,*,#296,.F.);+#296=EDGE_CURVE('',#297,#223,#299,.T.);+#297=VERTEX_POINT('',#298);+#298=CARTESIAN_POINT('',(-1.3305,-2.0195,0.435));+#299=LINE('',#298,#66);+#300=ORIENTED_EDGE('',*,*,#301,.F.);+#301=EDGE_CURVE('',#63,#297,#302,.T.);+#302=B_SPLINE_CURVE_WITH_KNOTS('',1,(#64,#298),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#303=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#64,#298),(#57,#176)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.239709198822),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#304=ADVANCED_FACE('',(#305),#317,.F.);+#305=FACE_BOUND('',#306,.F.);+#306=EDGE_LOOP('',(#307,#308,#313,#316));+#307=ORIENTED_EDGE('',*,*,#76,.T.);+#308=ORIENTED_EDGE('',*,*,#309,.T.);+#309=EDGE_CURVE('',#70,#310,#312,.T.);+#310=VERTEX_POINT('',#311);+#311=CARTESIAN_POINT('',(1.3305,-2.0195,0.435));+#312=B_SPLINE_CURVE_WITH_KNOTS('',1,(#71,#311),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#313=ORIENTED_EDGE('',*,*,#314,.F.);+#314=EDGE_CURVE('',#234,#310,#315,.T.);+#315=LINE('',#235,#80);+#316=ORIENTED_EDGE('',*,*,#233,.F.);+#317=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#78,#235),(#71,#311)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.239709198822),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#318=ADVANCED_FACE('',(#319),#327,.F.);+#319=FACE_BOUND('',#320,.F.);+#320=EDGE_LOOP('',(#321,#322,#323,#326));+#321=ORIENTED_EDGE('',*,*,#69,.T.);+#322=ORIENTED_EDGE('',*,*,#301,.T.);+#323=ORIENTED_EDGE('',*,*,#324,.F.);+#324=EDGE_CURVE('',#310,#297,#325,.T.);+#325=LINE('',#311,#73);+#326=ORIENTED_EDGE('',*,*,#309,.F.);+#327=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#71,#311),(#64,#298)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.661),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#328=ADVANCED_FACE('',(#329),#346,.F.);+#329=FACE_BOUND('',#330,.F.);+#330=EDGE_LOOP('',(#331,#337,#342,#345));+#331=ORIENTED_EDGE('',*,*,#332,.F.);+#332=EDGE_CURVE('',#333,#98,#335,.T.);+#333=VERTEX_POINT('',#334);+#334=CARTESIAN_POINT('',(-0.8255,1.4225,0.));+#335=LINE('',#334,#336);+#336=VECTOR('',#13,1.);+#337=ORIENTED_EDGE('',*,*,#338,.T.);+#338=EDGE_CURVE('',#333,#339,#341,.T.);+#339=VERTEX_POINT('',#340);+#340=CARTESIAN_POINT('',(0.8255,1.4225,0.));+#341=LINE('',#334,#27);+#342=ORIENTED_EDGE('',*,*,#343,.T.);+#343=EDGE_CURVE('',#339,#100,#344,.T.);+#344=LINE('',#340,#336);+#345=ORIENTED_EDGE('',*,*,#97,.F.);+#346=PLANE('',#347);+#347=AXIS2_PLACEMENT_3D('',#334,#88,#13);+#348=ADVANCED_FACE('',(#349),#361,.F.);+#349=FACE_BOUND('',#350,.F.);+#350=EDGE_LOOP('',(#351,#356,#357,#358));+#351=ORIENTED_EDGE('',*,*,#352,.F.);+#352=EDGE_CURVE('',#333,#353,#355,.T.);+#353=VERTEX_POINT('',#354);+#354=CARTESIAN_POINT('',(-0.8255,-1.4225,0.));+#355=LINE('',#334,#87);+#356=ORIENTED_EDGE('',*,*,#332,.T.);+#357=ORIENTED_EDGE('',*,*,#114,.T.);+#358=ORIENTED_EDGE('',*,*,#359,.F.);+#359=EDGE_CURVE('',#353,#110,#360,.T.);+#360=LINE('',#354,#336);+#361=PLANE('',#362);+#362=AXIS2_PLACEMENT_3D('',#334,#28,#13);+#363=ADVANCED_FACE('',(#364),#374,.T.);+#364=FACE_BOUND('',#365,.T.);+#365=EDGE_LOOP('',(#358,#366,#371,#108));+#366=ORIENTED_EDGE('',*,*,#367,.T.);+#367=EDGE_CURVE('',#353,#368,#370,.T.);+#368=VERTEX_POINT('',#369);+#369=CARTESIAN_POINT('',(0.8255,-1.4225,0.));+#370=LINE('',#354,#27);+#371=ORIENTED_EDGE('',*,*,#372,.T.);+#372=EDGE_CURVE('',#368,#105,#373,.T.);+#373=LINE('',#369,#336);+#374=PLANE('',#375);+#375=AXIS2_PLACEMENT_3D('',#354,#88,#13);+#376=ADVANCED_FACE('',(#377),#383,.T.);+#377=FACE_BOUND('',#378,.T.);+#378=EDGE_LOOP('',(#379,#342,#103,#382));+#379=ORIENTED_EDGE('',*,*,#380,.F.);+#380=EDGE_CURVE('',#339,#368,#381,.T.);+#381=LINE('',#340,#87);+#382=ORIENTED_EDGE('',*,*,#372,.F.);+#383=PLANE('',#384);+#384=AXIS2_PLACEMENT_3D('',#340,#28,#13);+#385=ADVANCED_FACE('',(#386),#398,.F.);+#386=FACE_BOUND('',#387,.F.);+#387=EDGE_LOOP('',(#388,#389,#394,#397));+#388=ORIENTED_EDGE('',*,*,#129,.T.);+#389=ORIENTED_EDGE('',*,*,#390,.T.);+#390=EDGE_CURVE('',#125,#391,#393,.T.);+#391=VERTEX_POINT('',#392);+#392=CARTESIAN_POINT('',(1.5,1.85,0.615));+#393=B_SPLINE_CURVE_WITH_KNOTS('',1,(#126,#392),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#394=ORIENTED_EDGE('',*,*,#395,.F.);+#395=EDGE_CURVE('',#139,#391,#396,.T.);+#396=LINE('',#140,#92);+#397=ORIENTED_EDGE('',*,*,#138,.F.);+#398=PLANE('',#399);+#399=AXIS2_PLACEMENT_3D('',#140,#81,#93);+#400=ADVANCED_FACE('',(#401),#459,.F.);+#401=FACE_BOUND('',#402,.F.);+#402=EDGE_LOOP('',(#403,#408,#409,#410,#415,#421,#426,#431,#436,#441,#447,#455));+#403=ORIENTED_EDGE('',*,*,#404,.T.);+#404=EDGE_CURVE('',#405,#144,#407,.T.);+#405=VERTEX_POINT('',#406);+#406=CARTESIAN_POINT('',(-1.5,1.85,0.615));+#407=LINE('',#406,#52);+#408=ORIENTED_EDGE('',*,*,#143,.T.);+#409=ORIENTED_EDGE('',*,*,#395,.T.);+#410=ORIENTED_EDGE('',*,*,#411,.T.);+#411=EDGE_CURVE('',#391,#412,#414,.T.);+#412=VERTEX_POINT('',#413);+#413=CARTESIAN_POINT('',(1.5,1.775,0.615));+#414=LINE('',#392,#87);+#415=ORIENTED_EDGE('',*,*,#416,.T.);+#416=EDGE_CURVE('',#412,#417,#419,.T.);+#417=VERTEX_POINT('',#418);+#418=CARTESIAN_POINT('',(1.425,1.775,0.615));+#419=LINE('',#420,#73);+#420=CARTESIAN_POINT('',(1.75,1.775,0.615));+#421=ORIENTED_EDGE('',*,*,#422,.F.);+#422=EDGE_CURVE('',#423,#417,#425,.T.);+#423=VERTEX_POINT('',#424);+#424=CARTESIAN_POINT('',(1.425,1.8125,0.615));+#425=LINE('',#424,#87);+#426=ORIENTED_EDGE('',*,*,#427,.F.);+#427=EDGE_CURVE('',#428,#423,#430,.T.);+#428=VERTEX_POINT('',#429);+#429=CARTESIAN_POINT('',(1.293,1.9445,0.615));+#430=LINE('',#429,#92);+#431=ORIENTED_EDGE('',*,*,#432,.F.);+#432=EDGE_CURVE('',#433,#428,#435,.T.);+#433=VERTEX_POINT('',#434);+#434=CARTESIAN_POINT('',(-1.293,1.9445,0.615));+#435=LINE('',#434,#27);+#436=ORIENTED_EDGE('',*,*,#437,.F.);+#437=EDGE_CURVE('',#438,#433,#440,.T.);+#438=VERTEX_POINT('',#439);+#439=CARTESIAN_POINT('',(-1.425,1.8125,0.615));+#440=LINE('',#439,#52);+#441=ORIENTED_EDGE('',*,*,#442,.F.);+#442=EDGE_CURVE('',#443,#438,#445,.T.);+#443=VERTEX_POINT('',#444);+#444=CARTESIAN_POINT('',(-1.425,1.775,0.615));+#445=LINE('',#446,#59);+#446=CARTESIAN_POINT('',(-1.425,-1.8125,0.615));+#447=ORIENTED_EDGE('',*,*,#448,.F.);+#448=EDGE_CURVE('',#449,#443,#451,.T.);+#449=VERTEX_POINT('',#450);+#450=CARTESIAN_POINT('',(-1.5,1.775,0.615));+#451=LINE('',#452,#453);+#452=CARTESIAN_POINT('',(-1.75,1.775,0.615));+#453=VECTOR('',#454,1.);+#454=DIRECTION('',(1.,-1.144237745222E-17,0.));+#455=ORIENTED_EDGE('',*,*,#456,.T.);+#456=EDGE_CURVE('',#449,#405,#457,.T.);+#457=LINE('',#458,#59);+#458=CARTESIAN_POINT('',(-1.5,-1.85,0.615));+#459=PLANE('',#460);+#460=AXIS2_PLACEMENT_3D('',#461,#462,#463);+#461=CARTESIAN_POINT('',(-1.998603303057E-16,1.982,0.615));+#462=DIRECTION('',(6.511636322077E-33,-3.962414280587E-28,-1.));+#463=DIRECTION('',(1.,1.041851360869E-16,6.511636322036E-33));+#464=ADVANCED_FACE('',(#465),#473,.F.);+#465=FACE_BOUND('',#466,.F.);+#466=EDGE_LOOP('',(#467,#468,#469,#470));+#467=ORIENTED_EDGE('',*,*,#158,.T.);+#468=ORIENTED_EDGE('',*,*,#148,.T.);+#469=ORIENTED_EDGE('',*,*,#404,.F.);+#470=ORIENTED_EDGE('',*,*,#471,.F.);+#471=EDGE_CURVE('',#159,#405,#472,.T.);+#472=B_SPLINE_CURVE_WITH_KNOTS('',1,(#160,#406),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#473=PLANE('',#474);+#474=AXIS2_PLACEMENT_3D('',#406,#93,#53);+#475=ADVANCED_FACE('',(#476),#491,.F.);+#476=FACE_BOUND('',#477,.F.);+#477=EDGE_LOOP('',(#478,#482,#483,#489));+#478=ORIENTED_EDGE('',*,*,#479,.F.);+#479=EDGE_CURVE('',#223,#480,#481,.T.);+#480=VERTEX_POINT('',#458);+#481=B_SPLINE_CURVE_WITH_KNOTS('',1,(#176,#458),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#482=ORIENTED_EDGE('',*,*,#222,.T.);+#483=ORIENTED_EDGE('',*,*,#484,.T.);+#484=EDGE_CURVE('',#219,#485,#487,.T.);+#485=VERTEX_POINT('',#486);+#486=CARTESIAN_POINT('',(-1.5,-1.775,0.615));+#487=LINE('',#488,#336);+#488=CARTESIAN_POINT('',(-1.5,-1.775,0.461759022967));+#489=ORIENTED_EDGE('',*,*,#490,.F.);+#490=EDGE_CURVE('',#480,#485,#457,.T.);+#491=PLANE('',#492);+#492=AXIS2_PLACEMENT_3D('',#458,#28,#60);+#493=ADVANCED_FACE('',(#494),#516,.F.);+#494=FACE_BOUND('',#495,.F.);+#495=EDGE_LOOP('',(#496,#504,#505,#511));+#496=ORIENTED_EDGE('',*,*,#497,.F.);+#497=EDGE_CURVE('',#219,#498,#500,.T.);+#498=VERTEX_POINT('',#499);+#499=CARTESIAN_POINT('',(-1.75,-1.775,0.435));+#500=LINE('',#501,#502);+#501=CARTESIAN_POINT('',(-1.35,-1.775,0.435));+#502=VECTOR('',#503,1.);+#503=DIRECTION('',(-1.,1.144237745222E-17,0.));+#504=ORIENTED_EDGE('',*,*,#218,.T.);+#505=ORIENTED_EDGE('',*,*,#506,.T.);+#506=EDGE_CURVE('',#215,#507,#509,.T.);+#507=VERTEX_POINT('',#508);+#508=CARTESIAN_POINT('',(-1.75,-1.475,0.435));+#509=LINE('',#510,#502);+#510=CARTESIAN_POINT('',(-1.35,-1.475,0.435));+#511=ORIENTED_EDGE('',*,*,#512,.F.);+#512=EDGE_CURVE('',#498,#507,#513,.T.);+#513=LINE('',#499,#514);+#514=VECTOR('',#515,1.);+#515=DIRECTION('',(1.144237745222E-17,1.,0.));+#516=PLANE('',#517);+#517=AXIS2_PLACEMENT_3D('',#501,#13,#503);+#518=ADVANCED_FACE('',(#519),#491,.F.);+#519=FACE_BOUND('',#520,.F.);+#520=EDGE_LOOP('',(#521,#527,#528,#534));+#521=ORIENTED_EDGE('',*,*,#522,.F.);+#522=EDGE_CURVE('',#215,#523,#525,.T.);+#523=VERTEX_POINT('',#524);+#524=CARTESIAN_POINT('',(-1.5,-1.475,0.615));+#525=LINE('',#526,#336);+#526=CARTESIAN_POINT('',(-1.5,-1.475,0.461759022967));+#527=ORIENTED_EDGE('',*,*,#214,.T.);+#528=ORIENTED_EDGE('',*,*,#529,.T.);+#529=EDGE_CURVE('',#211,#530,#532,.T.);+#530=VERTEX_POINT('',#531);+#531=CARTESIAN_POINT('',(-1.5,-1.125,0.615));+#532=LINE('',#533,#336);+#533=CARTESIAN_POINT('',(-1.5,-1.125,0.461759022967));+#534=ORIENTED_EDGE('',*,*,#535,.F.);+#535=EDGE_CURVE('',#523,#530,#457,.T.);+#536=ADVANCED_FACE('',(#537),#555,.F.);+#537=FACE_BOUND('',#538,.F.);+#538=EDGE_LOOP('',(#539,#545,#546,#552));+#539=ORIENTED_EDGE('',*,*,#540,.F.);+#540=EDGE_CURVE('',#211,#541,#543,.T.);+#541=VERTEX_POINT('',#542);+#542=CARTESIAN_POINT('',(-1.75,-1.125,0.435));+#543=LINE('',#544,#502);+#544=CARTESIAN_POINT('',(-1.35,-1.125,0.435));+#545=ORIENTED_EDGE('',*,*,#210,.T.);+#546=ORIENTED_EDGE('',*,*,#547,.T.);+#547=EDGE_CURVE('',#207,#548,#550,.T.);+#548=VERTEX_POINT('',#549);+#549=CARTESIAN_POINT('',(-1.75,-0.825,0.435));+#550=LINE('',#551,#502);+#551=CARTESIAN_POINT('',(-1.35,-0.825,0.435));+#552=ORIENTED_EDGE('',*,*,#553,.F.);+#553=EDGE_CURVE('',#541,#548,#554,.T.);+#554=LINE('',#542,#514);+#555=PLANE('',#556);+#556=AXIS2_PLACEMENT_3D('',#544,#13,#503);+#557=ADVANCED_FACE('',(#558),#491,.F.);+#558=FACE_BOUND('',#559,.F.);+#559=EDGE_LOOP('',(#560,#566,#567,#573));+#560=ORIENTED_EDGE('',*,*,#561,.F.);+#561=EDGE_CURVE('',#207,#562,#564,.T.);+#562=VERTEX_POINT('',#563);+#563=CARTESIAN_POINT('',(-1.5,-0.825,0.615));+#564=LINE('',#565,#336);+#565=CARTESIAN_POINT('',(-1.5,-0.825,0.461759022967));+#566=ORIENTED_EDGE('',*,*,#206,.T.);+#567=ORIENTED_EDGE('',*,*,#568,.T.);+#568=EDGE_CURVE('',#203,#569,#571,.T.);+#569=VERTEX_POINT('',#570);+#570=CARTESIAN_POINT('',(-1.5,-0.475,0.615));+#571=LINE('',#572,#336);+#572=CARTESIAN_POINT('',(-1.5,-0.475,0.461759022967));+#573=ORIENTED_EDGE('',*,*,#574,.F.);+#574=EDGE_CURVE('',#562,#569,#457,.T.);+#575=ADVANCED_FACE('',(#576),#594,.F.);+#576=FACE_BOUND('',#577,.F.);+#577=EDGE_LOOP('',(#578,#584,#585,#591));+#578=ORIENTED_EDGE('',*,*,#579,.F.);+#579=EDGE_CURVE('',#203,#580,#582,.T.);+#580=VERTEX_POINT('',#581);+#581=CARTESIAN_POINT('',(-1.75,-0.475,0.435));+#582=LINE('',#583,#502);+#583=CARTESIAN_POINT('',(-1.35,-0.475,0.435));+#584=ORIENTED_EDGE('',*,*,#202,.T.);+#585=ORIENTED_EDGE('',*,*,#586,.T.);+#586=EDGE_CURVE('',#199,#587,#589,.T.);+#587=VERTEX_POINT('',#588);+#588=CARTESIAN_POINT('',(-1.75,-0.175,0.435));+#589=LINE('',#590,#502);+#590=CARTESIAN_POINT('',(-1.35,-0.175,0.435));+#591=ORIENTED_EDGE('',*,*,#592,.F.);+#592=EDGE_CURVE('',#580,#587,#593,.T.);+#593=LINE('',#581,#514);+#594=PLANE('',#595);+#595=AXIS2_PLACEMENT_3D('',#583,#13,#503);+#596=ADVANCED_FACE('',(#597),#491,.F.);+#597=FACE_BOUND('',#598,.F.);+#598=EDGE_LOOP('',(#599,#605,#606,#612));+#599=ORIENTED_EDGE('',*,*,#600,.F.);+#600=EDGE_CURVE('',#199,#601,#603,.T.);+#601=VERTEX_POINT('',#602);+#602=CARTESIAN_POINT('',(-1.5,-0.175,0.615));+#603=LINE('',#604,#336);+#604=CARTESIAN_POINT('',(-1.5,-0.175,0.461759022967));+#605=ORIENTED_EDGE('',*,*,#198,.T.);+#606=ORIENTED_EDGE('',*,*,#607,.T.);+#607=EDGE_CURVE('',#195,#608,#610,.T.);+#608=VERTEX_POINT('',#609);+#609=CARTESIAN_POINT('',(-1.5,0.175,0.615));+#610=LINE('',#611,#336);+#611=CARTESIAN_POINT('',(-1.5,0.175,0.461759022967));+#612=ORIENTED_EDGE('',*,*,#613,.F.);+#613=EDGE_CURVE('',#601,#608,#457,.T.);+#614=ADVANCED_FACE('',(#615),#633,.F.);+#615=FACE_BOUND('',#616,.F.);+#616=EDGE_LOOP('',(#617,#623,#624,#630));+#617=ORIENTED_EDGE('',*,*,#618,.F.);+#618=EDGE_CURVE('',#195,#619,#621,.T.);+#619=VERTEX_POINT('',#620);+#620=CARTESIAN_POINT('',(-1.75,0.175,0.435));+#621=LINE('',#622,#502);+#622=CARTESIAN_POINT('',(-1.35,0.175,0.435));+#623=ORIENTED_EDGE('',*,*,#194,.T.);+#624=ORIENTED_EDGE('',*,*,#625,.T.);+#625=EDGE_CURVE('',#191,#626,#628,.T.);+#626=VERTEX_POINT('',#627);+#627=CARTESIAN_POINT('',(-1.75,0.475,0.435));+#628=LINE('',#629,#502);+#629=CARTESIAN_POINT('',(-1.35,0.475,0.435));+#630=ORIENTED_EDGE('',*,*,#631,.F.);+#631=EDGE_CURVE('',#619,#626,#632,.T.);+#632=LINE('',#620,#514);+#633=PLANE('',#634);+#634=AXIS2_PLACEMENT_3D('',#622,#13,#503);+#635=ADVANCED_FACE('',(#636),#491,.F.);+#636=FACE_BOUND('',#637,.F.);+#637=EDGE_LOOP('',(#638,#644,#645,#651));+#638=ORIENTED_EDGE('',*,*,#639,.F.);+#639=EDGE_CURVE('',#191,#640,#642,.T.);+#640=VERTEX_POINT('',#641);+#641=CARTESIAN_POINT('',(-1.5,0.475,0.615));+#642=LINE('',#643,#336);+#643=CARTESIAN_POINT('',(-1.5,0.475,0.461759022967));+#644=ORIENTED_EDGE('',*,*,#190,.T.);+#645=ORIENTED_EDGE('',*,*,#646,.T.);+#646=EDGE_CURVE('',#187,#647,#649,.T.);+#647=VERTEX_POINT('',#648);+#648=CARTESIAN_POINT('',(-1.5,0.825,0.615));+#649=LINE('',#650,#336);+#650=CARTESIAN_POINT('',(-1.5,0.825,0.461759022967));+#651=ORIENTED_EDGE('',*,*,#652,.F.);+#652=EDGE_CURVE('',#640,#647,#457,.T.);+#653=ADVANCED_FACE('',(#654),#672,.F.);+#654=FACE_BOUND('',#655,.F.);+#655=EDGE_LOOP('',(#656,#662,#663,#669));+#656=ORIENTED_EDGE('',*,*,#657,.F.);+#657=EDGE_CURVE('',#187,#658,#660,.T.);+#658=VERTEX_POINT('',#659);+#659=CARTESIAN_POINT('',(-1.75,0.825,0.435));+#660=LINE('',#661,#502);+#661=CARTESIAN_POINT('',(-1.35,0.825,0.435));+#662=ORIENTED_EDGE('',*,*,#186,.T.);+#663=ORIENTED_EDGE('',*,*,#664,.T.);+#664=EDGE_CURVE('',#183,#665,#667,.T.);+#665=VERTEX_POINT('',#666);+#666=CARTESIAN_POINT('',(-1.75,1.125,0.435));+#667=LINE('',#668,#502);+#668=CARTESIAN_POINT('',(-1.35,1.125,0.435));+#669=ORIENTED_EDGE('',*,*,#670,.F.);+#670=EDGE_CURVE('',#658,#665,#671,.T.);+#671=LINE('',#659,#514);+#672=PLANE('',#673);+#673=AXIS2_PLACEMENT_3D('',#661,#13,#503);+#674=ADVANCED_FACE('',(#675),#491,.F.);+#675=FACE_BOUND('',#676,.F.);+#676=EDGE_LOOP('',(#677,#683,#684,#690));+#677=ORIENTED_EDGE('',*,*,#678,.F.);+#678=EDGE_CURVE('',#183,#679,#681,.T.);+#679=VERTEX_POINT('',#680);+#680=CARTESIAN_POINT('',(-1.5,1.125,0.615));+#681=LINE('',#682,#336);+#682=CARTESIAN_POINT('',(-1.5,1.125,0.461759022967));+#683=ORIENTED_EDGE('',*,*,#182,.T.);+#684=ORIENTED_EDGE('',*,*,#685,.T.);+#685=EDGE_CURVE('',#179,#686,#688,.T.);+#686=VERTEX_POINT('',#687);+#687=CARTESIAN_POINT('',(-1.5,1.475,0.615));+#688=LINE('',#689,#336);+#689=CARTESIAN_POINT('',(-1.5,1.475,0.461759022967));+#690=ORIENTED_EDGE('',*,*,#691,.F.);+#691=EDGE_CURVE('',#679,#686,#457,.T.);+#692=ADVANCED_FACE('',(#693),#711,.F.);+#693=FACE_BOUND('',#694,.F.);+#694=EDGE_LOOP('',(#695,#701,#702,#708));+#695=ORIENTED_EDGE('',*,*,#696,.F.);+#696=EDGE_CURVE('',#179,#697,#699,.T.);+#697=VERTEX_POINT('',#698);+#698=CARTESIAN_POINT('',(-1.75,1.475,0.435));+#699=LINE('',#700,#502);+#700=CARTESIAN_POINT('',(-1.35,1.475,0.435));+#701=ORIENTED_EDGE('',*,*,#178,.T.);+#702=ORIENTED_EDGE('',*,*,#703,.T.);+#703=EDGE_CURVE('',#173,#704,#706,.T.);+#704=VERTEX_POINT('',#705);+#705=CARTESIAN_POINT('',(-1.75,1.775,0.435));+#706=LINE('',#707,#502);+#707=CARTESIAN_POINT('',(-1.35,1.775,0.435));+#708=ORIENTED_EDGE('',*,*,#709,.F.);+#709=EDGE_CURVE('',#697,#704,#710,.T.);+#710=LINE('',#698,#514);+#711=PLANE('',#712);+#712=AXIS2_PLACEMENT_3D('',#700,#13,#503);+#713=ADVANCED_FACE('',(#714),#491,.F.);+#714=FACE_BOUND('',#715,.F.);+#715=EDGE_LOOP('',(#716,#720,#721,#722));+#716=ORIENTED_EDGE('',*,*,#717,.F.);+#717=EDGE_CURVE('',#173,#449,#718,.T.);+#718=LINE('',#719,#336);+#719=CARTESIAN_POINT('',(-1.5,1.775,0.461759022967));+#720=ORIENTED_EDGE('',*,*,#172,.T.);+#721=ORIENTED_EDGE('',*,*,#471,.T.);+#722=ORIENTED_EDGE('',*,*,#456,.F.);+#723=ADVANCED_FACE('',(#724),#733,.F.);+#724=FACE_BOUND('',#725,.F.);+#725=EDGE_LOOP('',(#726,#727,#728,#732));+#726=ORIENTED_EDGE('',*,*,#390,.F.);+#727=ORIENTED_EDGE('',*,*,#287,.T.);+#728=ORIENTED_EDGE('',*,*,#729,.T.);+#729=EDGE_CURVE('',#284,#412,#730,.T.);+#730=LINE('',#731,#336);+#731=CARTESIAN_POINT('',(1.5,1.775,0.461759022967));+#732=ORIENTED_EDGE('',*,*,#411,.F.);+#733=PLANE('',#734);+#734=AXIS2_PLACEMENT_3D('',#392,#74,#88);+#735=ADVANCED_FACE('',(#736),#754,.F.);+#736=FACE_BOUND('',#737,.F.);+#737=EDGE_LOOP('',(#738,#744,#745,#751));+#738=ORIENTED_EDGE('',*,*,#739,.F.);+#739=EDGE_CURVE('',#284,#740,#742,.T.);+#740=VERTEX_POINT('',#741);+#741=CARTESIAN_POINT('',(1.75,1.775,0.435));+#742=LINE('',#743,#27);+#743=CARTESIAN_POINT('',(1.35,1.775,0.435));+#744=ORIENTED_EDGE('',*,*,#283,.T.);+#745=ORIENTED_EDGE('',*,*,#746,.T.);+#746=EDGE_CURVE('',#280,#747,#749,.T.);+#747=VERTEX_POINT('',#748);+#748=CARTESIAN_POINT('',(1.75,1.475,0.435));+#749=LINE('',#750,#27);+#750=CARTESIAN_POINT('',(1.35,1.475,0.435));+#751=ORIENTED_EDGE('',*,*,#752,.F.);+#752=EDGE_CURVE('',#740,#747,#753,.T.);+#753=LINE('',#741,#87);+#754=PLANE('',#755);+#755=AXIS2_PLACEMENT_3D('',#743,#13,#28);+#756=ADVANCED_FACE('',(#757),#733,.F.);+#757=FACE_BOUND('',#758,.F.);+#758=EDGE_LOOP('',(#759,#765,#766,#772));+#759=ORIENTED_EDGE('',*,*,#760,.F.);+#760=EDGE_CURVE('',#280,#761,#763,.T.);+#761=VERTEX_POINT('',#762);+#762=CARTESIAN_POINT('',(1.5,1.475,0.615));+#763=LINE('',#764,#336);+#764=CARTESIAN_POINT('',(1.5,1.475,0.461759022967));+#765=ORIENTED_EDGE('',*,*,#279,.T.);+#766=ORIENTED_EDGE('',*,*,#767,.T.);+#767=EDGE_CURVE('',#276,#768,#770,.T.);+#768=VERTEX_POINT('',#769);+#769=CARTESIAN_POINT('',(1.5,1.125,0.615));+#770=LINE('',#771,#336);+#771=CARTESIAN_POINT('',(1.5,1.125,0.461759022967));+#772=ORIENTED_EDGE('',*,*,#773,.F.);+#773=EDGE_CURVE('',#761,#768,#414,.T.);+#774=ADVANCED_FACE('',(#775),#793,.F.);+#775=FACE_BOUND('',#776,.F.);+#776=EDGE_LOOP('',(#777,#783,#784,#790));+#777=ORIENTED_EDGE('',*,*,#778,.F.);+#778=EDGE_CURVE('',#276,#779,#781,.T.);+#779=VERTEX_POINT('',#780);+#780=CARTESIAN_POINT('',(1.75,1.125,0.435));+#781=LINE('',#782,#27);+#782=CARTESIAN_POINT('',(1.35,1.125,0.435));+#783=ORIENTED_EDGE('',*,*,#275,.T.);+#784=ORIENTED_EDGE('',*,*,#785,.T.);+#785=EDGE_CURVE('',#272,#786,#788,.T.);+#786=VERTEX_POINT('',#787);+#787=CARTESIAN_POINT('',(1.75,0.825,0.435));+#788=LINE('',#789,#27);+#789=CARTESIAN_POINT('',(1.35,0.825,0.435));+#790=ORIENTED_EDGE('',*,*,#791,.F.);+#791=EDGE_CURVE('',#779,#786,#792,.T.);+#792=LINE('',#780,#87);+#793=PLANE('',#794);+#794=AXIS2_PLACEMENT_3D('',#782,#13,#28);+#795=ADVANCED_FACE('',(#796),#733,.F.);+#796=FACE_BOUND('',#797,.F.);+#797=EDGE_LOOP('',(#798,#804,#805,#811));+#798=ORIENTED_EDGE('',*,*,#799,.F.);+#799=EDGE_CURVE('',#272,#800,#802,.T.);+#800=VERTEX_POINT('',#801);+#801=CARTESIAN_POINT('',(1.5,0.825,0.615));+#802=LINE('',#803,#336);+#803=CARTESIAN_POINT('',(1.5,0.825,0.461759022967));+#804=ORIENTED_EDGE('',*,*,#271,.T.);+#805=ORIENTED_EDGE('',*,*,#806,.T.);+#806=EDGE_CURVE('',#268,#807,#809,.T.);+#807=VERTEX_POINT('',#808);+#808=CARTESIAN_POINT('',(1.5,0.475,0.615));+#809=LINE('',#810,#336);+#810=CARTESIAN_POINT('',(1.5,0.475,0.461759022967));+#811=ORIENTED_EDGE('',*,*,#812,.F.);+#812=EDGE_CURVE('',#800,#807,#414,.T.);+#813=ADVANCED_FACE('',(#814),#832,.F.);+#814=FACE_BOUND('',#815,.F.);+#815=EDGE_LOOP('',(#816,#822,#823,#829));+#816=ORIENTED_EDGE('',*,*,#817,.F.);+#817=EDGE_CURVE('',#268,#818,#820,.T.);+#818=VERTEX_POINT('',#819);+#819=CARTESIAN_POINT('',(1.75,0.475,0.435));+#820=LINE('',#821,#27);+#821=CARTESIAN_POINT('',(1.35,0.475,0.435));+#822=ORIENTED_EDGE('',*,*,#267,.T.);+#823=ORIENTED_EDGE('',*,*,#824,.T.);+#824=EDGE_CURVE('',#264,#825,#827,.T.);+#825=VERTEX_POINT('',#826);+#826=CARTESIAN_POINT('',(1.75,0.175,0.435));+#827=LINE('',#828,#27);+#828=CARTESIAN_POINT('',(1.35,0.175,0.435));+#829=ORIENTED_EDGE('',*,*,#830,.F.);+#830=EDGE_CURVE('',#818,#825,#831,.T.);+#831=LINE('',#819,#87);+#832=PLANE('',#833);+#833=AXIS2_PLACEMENT_3D('',#821,#13,#28);+#834=ADVANCED_FACE('',(#835),#733,.F.);+#835=FACE_BOUND('',#836,.F.);+#836=EDGE_LOOP('',(#837,#843,#844,#850));+#837=ORIENTED_EDGE('',*,*,#838,.F.);+#838=EDGE_CURVE('',#264,#839,#841,.T.);+#839=VERTEX_POINT('',#840);+#840=CARTESIAN_POINT('',(1.5,0.175,0.615));+#841=LINE('',#842,#336);+#842=CARTESIAN_POINT('',(1.5,0.175,0.461759022967));+#843=ORIENTED_EDGE('',*,*,#263,.T.);+#844=ORIENTED_EDGE('',*,*,#845,.T.);+#845=EDGE_CURVE('',#260,#846,#848,.T.);+#846=VERTEX_POINT('',#847);+#847=CARTESIAN_POINT('',(1.5,-0.175,0.615));+#848=LINE('',#849,#336);+#849=CARTESIAN_POINT('',(1.5,-0.175,0.461759022967));+#850=ORIENTED_EDGE('',*,*,#851,.F.);+#851=EDGE_CURVE('',#839,#846,#414,.T.);+#852=ADVANCED_FACE('',(#853),#871,.F.);+#853=FACE_BOUND('',#854,.F.);+#854=EDGE_LOOP('',(#855,#861,#862,#868));+#855=ORIENTED_EDGE('',*,*,#856,.F.);+#856=EDGE_CURVE('',#260,#857,#859,.T.);+#857=VERTEX_POINT('',#858);+#858=CARTESIAN_POINT('',(1.75,-0.175,0.435));+#859=LINE('',#860,#27);+#860=CARTESIAN_POINT('',(1.35,-0.175,0.435));+#861=ORIENTED_EDGE('',*,*,#259,.T.);+#862=ORIENTED_EDGE('',*,*,#863,.T.);+#863=EDGE_CURVE('',#256,#864,#866,.T.);+#864=VERTEX_POINT('',#865);+#865=CARTESIAN_POINT('',(1.75,-0.475,0.435));+#866=LINE('',#867,#27);+#867=CARTESIAN_POINT('',(1.35,-0.475,0.435));+#868=ORIENTED_EDGE('',*,*,#869,.F.);+#869=EDGE_CURVE('',#857,#864,#870,.T.);+#870=LINE('',#858,#87);+#871=PLANE('',#872);+#872=AXIS2_PLACEMENT_3D('',#860,#13,#28);+#873=ADVANCED_FACE('',(#874),#733,.F.);+#874=FACE_BOUND('',#875,.F.);+#875=EDGE_LOOP('',(#876,#882,#883,#889));+#876=ORIENTED_EDGE('',*,*,#877,.F.);+#877=EDGE_CURVE('',#256,#878,#880,.T.);+#878=VERTEX_POINT('',#879);+#879=CARTESIAN_POINT('',(1.5,-0.475,0.615));+#880=LINE('',#881,#336);+#881=CARTESIAN_POINT('',(1.5,-0.475,0.461759022967));+#882=ORIENTED_EDGE('',*,*,#255,.T.);+#883=ORIENTED_EDGE('',*,*,#884,.T.);+#884=EDGE_CURVE('',#252,#885,#887,.T.);+#885=VERTEX_POINT('',#886);+#886=CARTESIAN_POINT('',(1.5,-0.825,0.615));+#887=LINE('',#888,#336);+#888=CARTESIAN_POINT('',(1.5,-0.825,0.461759022967));+#889=ORIENTED_EDGE('',*,*,#890,.F.);+#890=EDGE_CURVE('',#878,#885,#414,.T.);+#891=ADVANCED_FACE('',(#892),#910,.F.);+#892=FACE_BOUND('',#893,.F.);+#893=EDGE_LOOP('',(#894,#900,#901,#907));+#894=ORIENTED_EDGE('',*,*,#895,.F.);+#895=EDGE_CURVE('',#252,#896,#898,.T.);+#896=VERTEX_POINT('',#897);+#897=CARTESIAN_POINT('',(1.75,-0.825,0.435));+#898=LINE('',#899,#27);+#899=CARTESIAN_POINT('',(1.35,-0.825,0.435));+#900=ORIENTED_EDGE('',*,*,#251,.T.);+#901=ORIENTED_EDGE('',*,*,#902,.T.);+#902=EDGE_CURVE('',#248,#903,#905,.T.);+#903=VERTEX_POINT('',#904);+#904=CARTESIAN_POINT('',(1.75,-1.125,0.435));+#905=LINE('',#906,#27);+#906=CARTESIAN_POINT('',(1.35,-1.125,0.435));+#907=ORIENTED_EDGE('',*,*,#908,.F.);+#908=EDGE_CURVE('',#896,#903,#909,.T.);+#909=LINE('',#897,#87);+#910=PLANE('',#911);+#911=AXIS2_PLACEMENT_3D('',#899,#13,#28);+#912=ADVANCED_FACE('',(#913),#733,.F.);+#913=FACE_BOUND('',#914,.F.);+#914=EDGE_LOOP('',(#915,#921,#922,#928));+#915=ORIENTED_EDGE('',*,*,#916,.F.);+#916=EDGE_CURVE('',#248,#917,#919,.T.);+#917=VERTEX_POINT('',#918);+#918=CARTESIAN_POINT('',(1.5,-1.125,0.615));+#919=LINE('',#920,#336);+#920=CARTESIAN_POINT('',(1.5,-1.125,0.461759022967));+#921=ORIENTED_EDGE('',*,*,#247,.T.);+#922=ORIENTED_EDGE('',*,*,#923,.T.);+#923=EDGE_CURVE('',#244,#924,#926,.T.);+#924=VERTEX_POINT('',#925);+#925=CARTESIAN_POINT('',(1.5,-1.475,0.615));+#926=LINE('',#927,#336);+#927=CARTESIAN_POINT('',(1.5,-1.475,0.461759022967));+#928=ORIENTED_EDGE('',*,*,#929,.F.);+#929=EDGE_CURVE('',#917,#924,#414,.T.);+#930=ADVANCED_FACE('',(#931),#949,.F.);+#931=FACE_BOUND('',#932,.F.);+#932=EDGE_LOOP('',(#933,#939,#940,#946));+#933=ORIENTED_EDGE('',*,*,#934,.F.);+#934=EDGE_CURVE('',#244,#935,#937,.T.);+#935=VERTEX_POINT('',#936);+#936=CARTESIAN_POINT('',(1.75,-1.475,0.435));+#937=LINE('',#938,#27);+#938=CARTESIAN_POINT('',(1.35,-1.475,0.435));+#939=ORIENTED_EDGE('',*,*,#243,.T.);+#940=ORIENTED_EDGE('',*,*,#941,.T.);+#941=EDGE_CURVE('',#239,#942,#944,.T.);+#942=VERTEX_POINT('',#943);+#943=CARTESIAN_POINT('',(1.75,-1.775,0.435));+#944=LINE('',#945,#27);+#945=CARTESIAN_POINT('',(1.35,-1.775,0.435));+#946=ORIENTED_EDGE('',*,*,#947,.F.);+#947=EDGE_CURVE('',#935,#942,#948,.T.);+#948=LINE('',#936,#87);+#949=PLANE('',#950);+#950=AXIS2_PLACEMENT_3D('',#938,#13,#28);+#951=ADVANCED_FACE('',(#952),#733,.F.);+#952=FACE_BOUND('',#953,.F.);+#953=EDGE_LOOP('',(#954,#960,#961,#966));+#954=ORIENTED_EDGE('',*,*,#955,.F.);+#955=EDGE_CURVE('',#239,#956,#958,.T.);+#956=VERTEX_POINT('',#957);+#957=CARTESIAN_POINT('',(1.5,-1.775,0.615));+#958=LINE('',#959,#336);+#959=CARTESIAN_POINT('',(1.5,-1.775,0.461759022967));+#960=ORIENTED_EDGE('',*,*,#238,.T.);+#961=ORIENTED_EDGE('',*,*,#962,.T.);+#962=EDGE_CURVE('',#234,#963,#965,.T.);+#963=VERTEX_POINT('',#964);+#964=CARTESIAN_POINT('',(1.5,-1.85,0.615));+#965=B_SPLINE_CURVE_WITH_KNOTS('',1,(#235,#964),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#966=ORIENTED_EDGE('',*,*,#967,.F.);+#967=EDGE_CURVE('',#956,#963,#414,.T.);+#968=ADVANCED_FACE('',(#969),#981,.F.);+#969=FACE_BOUND('',#970,.F.);+#970=EDGE_LOOP('',(#971,#972,#973,#978));+#971=ORIENTED_EDGE('',*,*,#296,.T.);+#972=ORIENTED_EDGE('',*,*,#479,.T.);+#973=ORIENTED_EDGE('',*,*,#974,.F.);+#974=EDGE_CURVE('',#975,#480,#977,.T.);+#975=VERTEX_POINT('',#976);+#976=CARTESIAN_POINT('',(-1.3305,-2.0195,0.615));+#977=LINE('',#976,#66);+#978=ORIENTED_EDGE('',*,*,#979,.F.);+#979=EDGE_CURVE('',#297,#975,#980,.T.);+#980=B_SPLINE_CURVE_WITH_KNOTS('',1,(#298,#976),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#981=PLANE('',#982);+#982=AXIS2_PLACEMENT_3D('',#976,#53,#67);+#983=ADVANCED_FACE('',(#984),#996,.F.);+#984=FACE_BOUND('',#985,.F.);+#985=EDGE_LOOP('',(#986,#987,#992,#995));+#986=ORIENTED_EDGE('',*,*,#314,.T.);+#987=ORIENTED_EDGE('',*,*,#988,.T.);+#988=EDGE_CURVE('',#310,#989,#991,.T.);+#989=VERTEX_POINT('',#990);+#990=CARTESIAN_POINT('',(1.3305,-2.0195,0.615));+#991=B_SPLINE_CURVE_WITH_KNOTS('',1,(#311,#990),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#992=ORIENTED_EDGE('',*,*,#993,.F.);+#993=EDGE_CURVE('',#963,#989,#994,.T.);+#994=LINE('',#964,#80);+#995=ORIENTED_EDGE('',*,*,#962,.F.);+#996=PLANE('',#997);+#997=AXIS2_PLACEMENT_3D('',#964,#67,#81);+#998=ADVANCED_FACE('',(#999),#1007,.F.);+#999=FACE_BOUND('',#1000,.F.);+#1000=EDGE_LOOP('',(#1001,#1002,#1003,#1006));+#1001=ORIENTED_EDGE('',*,*,#324,.T.);+#1002=ORIENTED_EDGE('',*,*,#979,.T.);+#1003=ORIENTED_EDGE('',*,*,#1004,.F.);+#1004=EDGE_CURVE('',#989,#975,#1005,.T.);+#1005=LINE('',#990,#73);+#1006=ORIENTED_EDGE('',*,*,#988,.F.);+#1007=PLANE('',#1008);+#1008=AXIS2_PLACEMENT_3D('',#990,#60,#74);+#1009=ADVANCED_FACE('',(#1010),#1014,.F.);+#1010=FACE_BOUND('',#1011,.F.);+#1011=EDGE_LOOP('',(#1012,#1013,#366,#379));+#1012=ORIENTED_EDGE('',*,*,#338,.F.);+#1013=ORIENTED_EDGE('',*,*,#352,.T.);+#1014=PLANE('',#1015);+#1015=AXIS2_PLACEMENT_3D('',#334,#13,#88);+#1016=ADVANCED_FACE('',(#1017),#1037,.F.);+#1017=FACE_BOUND('',#1018,.F.);+#1018=EDGE_LOOP('',(#1019,#1024,#1028,#1030,#1031,#1035));+#1019=ORIENTED_EDGE('',*,*,#1020,.F.);+#1020=EDGE_CURVE('',#1021,#686,#1023,.T.);+#1021=VERTEX_POINT('',#1022);+#1022=CARTESIAN_POINT('',(-1.75,1.475,0.615));+#1023=LINE('',#1022,#453);+#1024=ORIENTED_EDGE('',*,*,#1025,.T.);+#1025=EDGE_CURVE('',#1021,#1026,#1027,.T.);+#1026=VERTEX_POINT('',#452);+#1027=LINE('',#1022,#514);+#1028=ORIENTED_EDGE('',*,*,#1029,.T.);+#1029=EDGE_CURVE('',#1026,#449,#451,.T.);+#1030=ORIENTED_EDGE('',*,*,#448,.T.);+#1031=ORIENTED_EDGE('',*,*,#1032,.F.);+#1032=EDGE_CURVE('',#1033,#443,#445,.T.);+#1033=VERTEX_POINT('',#1034);+#1034=CARTESIAN_POINT('',(-1.425,1.475,0.615));+#1035=ORIENTED_EDGE('',*,*,#1036,.F.);+#1036=EDGE_CURVE('',#686,#1033,#1023,.T.);+#1037=PLANE('',#1038);+#1038=AXIS2_PLACEMENT_3D('',#1022,#1039,#454);+#1039=DIRECTION('',(0.,0.,-1.));+#1040=ADVANCED_FACE('',(#1041),#1101,.F.);+#1041=FACE_BOUND('',#1042,.F.);+#1042=EDGE_LOOP('',(#1043,#1048,#1052,#1056,#1060,#1064,#1068,#1072,#1076,#1080,#1084,#1086,#1087,#1088,#1093,#1098));+#1043=ORIENTED_EDGE('',*,*,#1044,.T.);+#1044=EDGE_CURVE('',#1045,#1046,#445,.T.);+#1045=VERTEX_POINT('',#446);+#1046=VERTEX_POINT('',#1047);+#1047=CARTESIAN_POINT('',(-1.425,-1.775,0.615));+#1048=ORIENTED_EDGE('',*,*,#1049,.T.);+#1049=EDGE_CURVE('',#1046,#1050,#445,.T.);+#1050=VERTEX_POINT('',#1051);+#1051=CARTESIAN_POINT('',(-1.425,-1.475,0.615));+#1052=ORIENTED_EDGE('',*,*,#1053,.T.);+#1053=EDGE_CURVE('',#1050,#1054,#445,.T.);+#1054=VERTEX_POINT('',#1055);+#1055=CARTESIAN_POINT('',(-1.425,-1.125,0.615));+#1056=ORIENTED_EDGE('',*,*,#1057,.T.);+#1057=EDGE_CURVE('',#1054,#1058,#445,.T.);+#1058=VERTEX_POINT('',#1059);+#1059=CARTESIAN_POINT('',(-1.425,-0.825,0.615));+#1060=ORIENTED_EDGE('',*,*,#1061,.T.);+#1061=EDGE_CURVE('',#1058,#1062,#445,.T.);+#1062=VERTEX_POINT('',#1063);+#1063=CARTESIAN_POINT('',(-1.425,-0.475,0.615));+#1064=ORIENTED_EDGE('',*,*,#1065,.T.);+#1065=EDGE_CURVE('',#1062,#1066,#445,.T.);+#1066=VERTEX_POINT('',#1067);+#1067=CARTESIAN_POINT('',(-1.425,-0.175,0.615));+#1068=ORIENTED_EDGE('',*,*,#1069,.T.);+#1069=EDGE_CURVE('',#1066,#1070,#445,.T.);+#1070=VERTEX_POINT('',#1071);+#1071=CARTESIAN_POINT('',(-1.425,0.175,0.615));+#1072=ORIENTED_EDGE('',*,*,#1073,.T.);+#1073=EDGE_CURVE('',#1070,#1074,#445,.T.);+#1074=VERTEX_POINT('',#1075);+#1075=CARTESIAN_POINT('',(-1.425,0.475,0.615));+#1076=ORIENTED_EDGE('',*,*,#1077,.T.);+#1077=EDGE_CURVE('',#1074,#1078,#445,.T.);+#1078=VERTEX_POINT('',#1079);+#1079=CARTESIAN_POINT('',(-1.425,0.825,0.615));+#1080=ORIENTED_EDGE('',*,*,#1081,.T.);+#1081=EDGE_CURVE('',#1078,#1082,#445,.T.);+#1082=VERTEX_POINT('',#1083);+#1083=CARTESIAN_POINT('',(-1.425,1.125,0.615));+#1084=ORIENTED_EDGE('',*,*,#1085,.T.);+#1085=EDGE_CURVE('',#1082,#1033,#445,.T.);+#1086=ORIENTED_EDGE('',*,*,#1032,.T.);+#1087=ORIENTED_EDGE('',*,*,#442,.T.);+#1088=ORIENTED_EDGE('',*,*,#1089,.T.);+#1089=EDGE_CURVE('',#438,#1090,#1092,.T.);+#1090=VERTEX_POINT('',#1091);+#1091=CARTESIAN_POINT('',(-1.353793551841,1.77689677592,0.95));+#1092=B_SPLINE_CURVE_WITH_KNOTS('',1,(#439,#1091),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1093=ORIENTED_EDGE('',*,*,#1094,.F.);+#1094=EDGE_CURVE('',#1095,#1090,#1097,.T.);+#1095=VERTEX_POINT('',#1096);+#1096=CARTESIAN_POINT('',(-1.353793551841,-1.77689677592,0.95));+#1097=LINE('',#1096,#59);+#1098=ORIENTED_EDGE('',*,*,#1099,.F.);+#1099=EDGE_CURVE('',#1045,#1095,#1100,.T.);+#1100=B_SPLINE_CURVE_WITH_KNOTS('',1,(#446,#1096),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1101=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#446,#1096),(#439,#1091)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.625),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1102=ADVANCED_FACE('',(#1103),#1115,.F.);+#1103=FACE_BOUND('',#1104,.F.);+#1104=EDGE_LOOP('',(#1105,#1106,#1111,#1114));+#1105=ORIENTED_EDGE('',*,*,#437,.T.);+#1106=ORIENTED_EDGE('',*,*,#1107,.T.);+#1107=EDGE_CURVE('',#433,#1108,#1110,.T.);+#1108=VERTEX_POINT('',#1109);+#1109=CARTESIAN_POINT('',(-1.25739677592,1.873293551841,0.95));+#1110=B_SPLINE_CURVE_WITH_KNOTS('',1,(#434,#1109),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1111=ORIENTED_EDGE('',*,*,#1112,.F.);+#1112=EDGE_CURVE('',#1090,#1108,#1113,.T.);+#1113=LINE('',#1091,#52);+#1114=ORIENTED_EDGE('',*,*,#1089,.F.);+#1115=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#439,#1091),(#434,#1109)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.186676190233),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1116=ADVANCED_FACE('',(#1117),#1129,.F.);+#1117=FACE_BOUND('',#1118,.F.);+#1118=EDGE_LOOP('',(#1119,#1120,#1125,#1128));+#1119=ORIENTED_EDGE('',*,*,#432,.T.);+#1120=ORIENTED_EDGE('',*,*,#1121,.T.);+#1121=EDGE_CURVE('',#428,#1122,#1124,.T.);+#1122=VERTEX_POINT('',#1123);+#1123=CARTESIAN_POINT('',(1.25739677592,1.873293551841,0.95));+#1124=B_SPLINE_CURVE_WITH_KNOTS('',1,(#429,#1123),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1125=ORIENTED_EDGE('',*,*,#1126,.F.);+#1126=EDGE_CURVE('',#1108,#1122,#1127,.T.);+#1127=LINE('',#1109,#27);+#1128=ORIENTED_EDGE('',*,*,#1107,.F.);+#1129=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#434,#1109),(#429,#1123)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.586),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1130=ADVANCED_FACE('',(#1131),#1143,.F.);+#1131=FACE_BOUND('',#1132,.F.);+#1132=EDGE_LOOP('',(#1133,#1134,#1139,#1142));+#1133=ORIENTED_EDGE('',*,*,#427,.T.);+#1134=ORIENTED_EDGE('',*,*,#1135,.T.);+#1135=EDGE_CURVE('',#423,#1136,#1138,.T.);+#1136=VERTEX_POINT('',#1137);+#1137=CARTESIAN_POINT('',(1.353793551841,1.77689677592,0.95));+#1138=B_SPLINE_CURVE_WITH_KNOTS('',1,(#424,#1137),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1139=ORIENTED_EDGE('',*,*,#1140,.F.);+#1140=EDGE_CURVE('',#1122,#1136,#1141,.T.);+#1141=LINE('',#1123,#92);+#1142=ORIENTED_EDGE('',*,*,#1121,.F.);+#1143=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#429,#1123),(#424,#1137)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.186676190233),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1144=ADVANCED_FACE('',(#1145),#1205,.F.);+#1145=FACE_BOUND('',#1146,.F.);+#1146=EDGE_LOOP('',(#1147,#1148,#1152,#1156,#1160,#1164,#1168,#1172,#1176,#1180,#1184,#1188,#1192,#1196,#1201,#1204));+#1147=ORIENTED_EDGE('',*,*,#422,.T.);+#1148=ORIENTED_EDGE('',*,*,#1149,.T.);+#1149=EDGE_CURVE('',#417,#1150,#425,.T.);+#1150=VERTEX_POINT('',#1151);+#1151=CARTESIAN_POINT('',(1.425,1.475,0.615));+#1152=ORIENTED_EDGE('',*,*,#1153,.T.);+#1153=EDGE_CURVE('',#1150,#1154,#425,.T.);+#1154=VERTEX_POINT('',#1155);+#1155=CARTESIAN_POINT('',(1.425,1.125,0.615));+#1156=ORIENTED_EDGE('',*,*,#1157,.T.);+#1157=EDGE_CURVE('',#1154,#1158,#425,.T.);+#1158=VERTEX_POINT('',#1159);+#1159=CARTESIAN_POINT('',(1.425,0.825,0.615));+#1160=ORIENTED_EDGE('',*,*,#1161,.T.);+#1161=EDGE_CURVE('',#1158,#1162,#425,.T.);+#1162=VERTEX_POINT('',#1163);+#1163=CARTESIAN_POINT('',(1.425,0.475,0.615));+#1164=ORIENTED_EDGE('',*,*,#1165,.T.);+#1165=EDGE_CURVE('',#1162,#1166,#425,.T.);+#1166=VERTEX_POINT('',#1167);+#1167=CARTESIAN_POINT('',(1.425,0.175,0.615));+#1168=ORIENTED_EDGE('',*,*,#1169,.T.);+#1169=EDGE_CURVE('',#1166,#1170,#425,.T.);+#1170=VERTEX_POINT('',#1171);+#1171=CARTESIAN_POINT('',(1.425,-0.175,0.615));+#1172=ORIENTED_EDGE('',*,*,#1173,.T.);+#1173=EDGE_CURVE('',#1170,#1174,#425,.T.);+#1174=VERTEX_POINT('',#1175);+#1175=CARTESIAN_POINT('',(1.425,-0.475,0.615));+#1176=ORIENTED_EDGE('',*,*,#1177,.T.);+#1177=EDGE_CURVE('',#1174,#1178,#425,.T.);+#1178=VERTEX_POINT('',#1179);+#1179=CARTESIAN_POINT('',(1.425,-0.825,0.615));+#1180=ORIENTED_EDGE('',*,*,#1181,.T.);+#1181=EDGE_CURVE('',#1178,#1182,#425,.T.);+#1182=VERTEX_POINT('',#1183);+#1183=CARTESIAN_POINT('',(1.425,-1.125,0.615));+#1184=ORIENTED_EDGE('',*,*,#1185,.T.);+#1185=EDGE_CURVE('',#1182,#1186,#425,.T.);+#1186=VERTEX_POINT('',#1187);+#1187=CARTESIAN_POINT('',(1.425,-1.475,0.615));+#1188=ORIENTED_EDGE('',*,*,#1189,.T.);+#1189=EDGE_CURVE('',#1186,#1190,#425,.T.);+#1190=VERTEX_POINT('',#1191);+#1191=CARTESIAN_POINT('',(1.425,-1.775,0.615));+#1192=ORIENTED_EDGE('',*,*,#1193,.T.);+#1193=EDGE_CURVE('',#1190,#1194,#425,.T.);+#1194=VERTEX_POINT('',#1195);+#1195=CARTESIAN_POINT('',(1.425,-1.8125,0.615));+#1196=ORIENTED_EDGE('',*,*,#1197,.T.);+#1197=EDGE_CURVE('',#1194,#1198,#1200,.T.);+#1198=VERTEX_POINT('',#1199);+#1199=CARTESIAN_POINT('',(1.353793551841,-1.77689677592,0.95));+#1200=B_SPLINE_CURVE_WITH_KNOTS('',1,(#1195,#1199),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1201=ORIENTED_EDGE('',*,*,#1202,.F.);+#1202=EDGE_CURVE('',#1136,#1198,#1203,.T.);+#1203=LINE('',#1137,#87);+#1204=ORIENTED_EDGE('',*,*,#1135,.F.);+#1205=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#424,#1137),(#1195,#1199)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.625),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1206=ADVANCED_FACE('',(#1207),#1224,.F.);+#1207=FACE_BOUND('',#1208,.F.);+#1208=EDGE_LOOP('',(#1209,#1212,#1217,#1220,#1222,#1223));+#1209=ORIENTED_EDGE('',*,*,#1210,.F.);+#1210=EDGE_CURVE('',#1211,#412,#419,.T.);+#1211=VERTEX_POINT('',#420);+#1212=ORIENTED_EDGE('',*,*,#1213,.T.);+#1213=EDGE_CURVE('',#1211,#1214,#1216,.T.);+#1214=VERTEX_POINT('',#1215);+#1215=CARTESIAN_POINT('',(1.75,1.475,0.615));+#1216=LINE('',#420,#87);+#1217=ORIENTED_EDGE('',*,*,#1218,.T.);+#1218=EDGE_CURVE('',#1214,#761,#1219,.T.);+#1219=LINE('',#1215,#73);+#1220=ORIENTED_EDGE('',*,*,#1221,.T.);+#1221=EDGE_CURVE('',#761,#1150,#1219,.T.);+#1222=ORIENTED_EDGE('',*,*,#1149,.F.);+#1223=ORIENTED_EDGE('',*,*,#416,.F.);+#1224=PLANE('',#1225);+#1225=AXIS2_PLACEMENT_3D('',#420,#1039,#74);+#1226=ADVANCED_FACE('',(#1227),#459,.F.);+#1227=FACE_BOUND('',#1228,.F.);+#1228=EDGE_LOOP('',(#1229,#1230,#1234,#1235,#1240,#1245,#1248,#1249,#1253,#1254,#1255,#1256));+#1229=ORIENTED_EDGE('',*,*,#490,.T.);+#1230=ORIENTED_EDGE('',*,*,#1231,.T.);+#1231=EDGE_CURVE('',#485,#1046,#1232,.T.);+#1232=LINE('',#1233,#453);+#1233=CARTESIAN_POINT('',(-1.75,-1.775,0.615));+#1234=ORIENTED_EDGE('',*,*,#1044,.F.);+#1235=ORIENTED_EDGE('',*,*,#1236,.F.);+#1236=EDGE_CURVE('',#1237,#1045,#1239,.T.);+#1237=VERTEX_POINT('',#1238);+#1238=CARTESIAN_POINT('',(-1.293,-1.9445,0.615));+#1239=LINE('',#1238,#66);+#1240=ORIENTED_EDGE('',*,*,#1241,.F.);+#1241=EDGE_CURVE('',#1242,#1237,#1244,.T.);+#1242=VERTEX_POINT('',#1243);+#1243=CARTESIAN_POINT('',(1.293,-1.9445,0.615));+#1244=LINE('',#1243,#73);+#1245=ORIENTED_EDGE('',*,*,#1246,.F.);+#1246=EDGE_CURVE('',#1194,#1242,#1247,.T.);+#1247=LINE('',#1195,#80);+#1248=ORIENTED_EDGE('',*,*,#1193,.F.);+#1249=ORIENTED_EDGE('',*,*,#1250,.F.);+#1250=EDGE_CURVE('',#956,#1190,#1251,.T.);+#1251=LINE('',#1252,#73);+#1252=CARTESIAN_POINT('',(1.75,-1.775,0.615));+#1253=ORIENTED_EDGE('',*,*,#967,.T.);+#1254=ORIENTED_EDGE('',*,*,#993,.T.);+#1255=ORIENTED_EDGE('',*,*,#1004,.T.);+#1256=ORIENTED_EDGE('',*,*,#974,.T.);+#1257=ADVANCED_FACE('',(#1258),#1325,.F.);+#1258=FACE_BOUND('',#1259,.F.);+#1259=EDGE_LOOP('',(#1260,#1261,#1262,#1271,#1278,#1287,#1292,#1297,#1302,#1309,#1316,#1323));+#1260=ORIENTED_EDGE('',*,*,#484,.F.);+#1261=ORIENTED_EDGE('',*,*,#497,.T.);+#1262=ORIENTED_EDGE('',*,*,#1263,.T.);+#1263=EDGE_CURVE('',#498,#1264,#1266,.T.);+#1264=VERTEX_POINT('',#1265);+#1265=CARTESIAN_POINT('',(-1.799240387651,-1.775,0.393682408883));+#1266=CIRCLE('',#1267,5.E-02);+#1267=AXIS2_PLACEMENT_3D('',#1268,#1269,#1270);+#1268=CARTESIAN_POINT('',(-1.75,-1.775,0.385));+#1269=DIRECTION('',(-1.144237745222E-17,-1.,3.284293275761E-47));+#1270=DIRECTION('',(4.440892098501E-15,-5.081436361562E-32,1.));+#1271=ORIENTED_EDGE('',*,*,#1272,.T.);+#1272=EDGE_CURVE('',#1264,#1273,#1275,.T.);+#1273=VERTEX_POINT('',#1274);+#1274=CARTESIAN_POINT('',(-1.830824898817,-1.775,0.190060919137));+#1275=LINE('',#1265,#1276);+#1276=VECTOR('',#1277,1.);+#1277=DIRECTION('',(-0.153280808835,1.753896870876E-18,-0.988182672203));+#1278=ORIENTED_EDGE('',*,*,#1279,.T.);+#1279=EDGE_CURVE('',#1273,#1280,#1282,.T.);+#1280=VERTEX_POINT('',#1281);+#1281=CARTESIAN_POINT('',(-2.05733068201,-1.775,8.326672684689E-17));+#1282=CIRCLE('',#1283,0.23);+#1283=AXIS2_PLACEMENT_3D('',#1284,#1285,#1286);+#1284=CARTESIAN_POINT('',(-2.05733068201,-1.775,0.23));+#1285=DIRECTION('',(1.144237745222E-17,1.,7.703719777549E-34));+#1286=DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667));+#1287=ORIENTED_EDGE('',*,*,#1288,.T.);+#1288=EDGE_CURVE('',#1280,#1289,#1291,.T.);+#1289=VERTEX_POINT('',#1290);+#1290=CARTESIAN_POINT('',(-2.45,-1.775,8.326672684689E-17));+#1291=LINE('',#1281,#502);+#1292=ORIENTED_EDGE('',*,*,#1293,.T.);+#1293=EDGE_CURVE('',#1289,#1294,#1296,.T.);+#1294=VERTEX_POINT('',#1295);+#1295=CARTESIAN_POINT('',(-2.45,-1.775,0.18));+#1296=LINE('',#1290,#336);+#1297=ORIENTED_EDGE('',*,*,#1298,.T.);+#1298=EDGE_CURVE('',#1294,#1299,#1301,.T.);+#1299=VERTEX_POINT('',#1300);+#1300=CARTESIAN_POINT('',(-2.05733068201,-1.775,0.18));+#1301=LINE('',#1295,#453);+#1302=ORIENTED_EDGE('',*,*,#1303,.T.);+#1303=EDGE_CURVE('',#1299,#1304,#1306,.T.);+#1304=VERTEX_POINT('',#1305);+#1305=CARTESIAN_POINT('',(-2.008090294359,-1.775,0.221317591117));+#1306=CIRCLE('',#1307,5.E-02);+#1307=AXIS2_PLACEMENT_3D('',#1284,#1308,#1039);+#1308=DIRECTION('',(-1.144237745222E-17,-1.,-0.));+#1309=ORIENTED_EDGE('',*,*,#1310,.T.);+#1310=EDGE_CURVE('',#1304,#1311,#1313,.T.);+#1311=VERTEX_POINT('',#1312);+#1312=CARTESIAN_POINT('',(-1.976505783193,-1.775,0.424939080863));+#1313=LINE('',#1305,#1314);+#1314=VECTOR('',#1315,1.);+#1315=DIRECTION('',(0.153280808835,-1.753896870876E-18,0.988182672203));+#1316=ORIENTED_EDGE('',*,*,#1317,.T.);+#1317=EDGE_CURVE('',#1311,#1318,#1319,.T.);+#1318=VERTEX_POINT('',#1233);+#1319=CIRCLE('',#1320,0.23);+#1320=AXIS2_PLACEMENT_3D('',#1268,#1321,#1322);+#1321=DIRECTION('',(1.144237745222E-17,1.,2.311115933265E-33));+#1322=DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667));+#1323=ORIENTED_EDGE('',*,*,#1324,.T.);+#1324=EDGE_CURVE('',#1318,#485,#1232,.T.);+#1325=PLANE('',#1326);+#1326=AXIS2_PLACEMENT_3D('',#1327,#515,#13);+#1327=CARTESIAN_POINT('',(-1.90066971159,-1.775,0.308518045934));+#1328=ADVANCED_FACE('',(#1329),#1343,.F.);+#1329=FACE_BOUND('',#1330,.F.);+#1330=EDGE_LOOP('',(#1331,#1332,#1339,#1342));+#1331=ORIENTED_EDGE('',*,*,#512,.T.);+#1332=ORIENTED_EDGE('',*,*,#1333,.T.);+#1333=EDGE_CURVE('',#507,#1334,#1336,.T.);+#1334=VERTEX_POINT('',#1335);+#1335=CARTESIAN_POINT('',(-1.799240387651,-1.475,0.393682408883));+#1336=CIRCLE('',#1337,5.E-02);+#1337=AXIS2_PLACEMENT_3D('',#1338,#1269,#1270);+#1338=CARTESIAN_POINT('',(-1.75,-1.475,0.385));+#1339=ORIENTED_EDGE('',*,*,#1340,.F.);+#1340=EDGE_CURVE('',#1264,#1334,#1341,.T.);+#1341=LINE('',#1265,#514);+#1342=ORIENTED_EDGE('',*,*,#1263,.F.);+#1343=CYLINDRICAL_SURFACE('',#1344,5.E-02);+#1344=AXIS2_PLACEMENT_3D('',#1268,#1345,#1270);+#1345=DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1346=ADVANCED_FACE('',(#1347),#1396,.T.);+#1347=FACE_BOUND('',#1348,.T.);+#1348=EDGE_LOOP('',(#521,#505,#1332,#1349,#1354,#1361,#1366,#1371,#1376,#1382,#1387,#1393));+#1349=ORIENTED_EDGE('',*,*,#1350,.T.);+#1350=EDGE_CURVE('',#1334,#1351,#1353,.T.);+#1351=VERTEX_POINT('',#1352);+#1352=CARTESIAN_POINT('',(-1.830824898817,-1.475,0.190060919137));+#1353=LINE('',#1335,#1276);+#1354=ORIENTED_EDGE('',*,*,#1355,.T.);+#1355=EDGE_CURVE('',#1351,#1356,#1358,.T.);+#1356=VERTEX_POINT('',#1357);+#1357=CARTESIAN_POINT('',(-2.05733068201,-1.475,8.326672684689E-17));+#1358=CIRCLE('',#1359,0.23);+#1359=AXIS2_PLACEMENT_3D('',#1360,#1285,#1286);+#1360=CARTESIAN_POINT('',(-2.05733068201,-1.475,0.23));+#1361=ORIENTED_EDGE('',*,*,#1362,.T.);+#1362=EDGE_CURVE('',#1356,#1363,#1365,.T.);+#1363=VERTEX_POINT('',#1364);+#1364=CARTESIAN_POINT('',(-2.45,-1.475,8.326672684689E-17));+#1365=LINE('',#1357,#502);+#1366=ORIENTED_EDGE('',*,*,#1367,.T.);+#1367=EDGE_CURVE('',#1363,#1368,#1370,.T.);+#1368=VERTEX_POINT('',#1369);+#1369=CARTESIAN_POINT('',(-2.45,-1.475,0.18));+#1370=LINE('',#1364,#336);+#1371=ORIENTED_EDGE('',*,*,#1372,.T.);+#1372=EDGE_CURVE('',#1368,#1373,#1375,.T.);+#1373=VERTEX_POINT('',#1374);+#1374=CARTESIAN_POINT('',(-2.05733068201,-1.475,0.18));+#1375=LINE('',#1369,#453);+#1376=ORIENTED_EDGE('',*,*,#1377,.T.);+#1377=EDGE_CURVE('',#1373,#1378,#1380,.T.);+#1378=VERTEX_POINT('',#1379);+#1379=CARTESIAN_POINT('',(-2.008090294359,-1.475,0.221317591117));+#1380=CIRCLE('',#1381,5.E-02);+#1381=AXIS2_PLACEMENT_3D('',#1360,#1308,#1039);+#1382=ORIENTED_EDGE('',*,*,#1383,.T.);+#1383=EDGE_CURVE('',#1378,#1384,#1386,.T.);+#1384=VERTEX_POINT('',#1385);+#1385=CARTESIAN_POINT('',(-1.976505783193,-1.475,0.424939080863));+#1386=LINE('',#1379,#1314);+#1387=ORIENTED_EDGE('',*,*,#1388,.T.);+#1388=EDGE_CURVE('',#1384,#1389,#1391,.T.);+#1389=VERTEX_POINT('',#1390);+#1390=CARTESIAN_POINT('',(-1.75,-1.475,0.615));+#1391=CIRCLE('',#1392,0.23);+#1392=AXIS2_PLACEMENT_3D('',#1338,#1321,#1322);+#1393=ORIENTED_EDGE('',*,*,#1394,.T.);+#1394=EDGE_CURVE('',#1389,#523,#1395,.T.);+#1395=LINE('',#1390,#453);+#1396=PLANE('',#1397);+#1397=AXIS2_PLACEMENT_3D('',#1398,#515,#13);+#1398=CARTESIAN_POINT('',(-1.90066971159,-1.475,0.308518045934));+#1399=ADVANCED_FACE('',(#1400),#459,.F.);+#1400=FACE_BOUND('',#1401,.F.);+#1401=EDGE_LOOP('',(#1402,#1403,#1407,#1408));+#1402=ORIENTED_EDGE('',*,*,#535,.T.);+#1403=ORIENTED_EDGE('',*,*,#1404,.T.);+#1404=EDGE_CURVE('',#530,#1054,#1405,.T.);+#1405=LINE('',#1406,#453);+#1406=CARTESIAN_POINT('',(-1.75,-1.125,0.615));+#1407=ORIENTED_EDGE('',*,*,#1053,.F.);+#1408=ORIENTED_EDGE('',*,*,#1409,.F.);+#1409=EDGE_CURVE('',#523,#1050,#1395,.T.);+#1410=ADVANCED_FACE('',(#1411),#1467,.F.);+#1411=FACE_BOUND('',#1412,.F.);+#1412=EDGE_LOOP('',(#1413,#1414,#1415,#1422,#1427,#1434,#1439,#1444,#1449,#1455,#1460,#1465));+#1413=ORIENTED_EDGE('',*,*,#529,.F.);+#1414=ORIENTED_EDGE('',*,*,#540,.T.);+#1415=ORIENTED_EDGE('',*,*,#1416,.T.);+#1416=EDGE_CURVE('',#541,#1417,#1419,.T.);+#1417=VERTEX_POINT('',#1418);+#1418=CARTESIAN_POINT('',(-1.799240387651,-1.125,0.393682408883));+#1419=CIRCLE('',#1420,5.E-02);+#1420=AXIS2_PLACEMENT_3D('',#1421,#1269,#1270);+#1421=CARTESIAN_POINT('',(-1.75,-1.125,0.385));+#1422=ORIENTED_EDGE('',*,*,#1423,.T.);+#1423=EDGE_CURVE('',#1417,#1424,#1426,.T.);+#1424=VERTEX_POINT('',#1425);+#1425=CARTESIAN_POINT('',(-1.830824898817,-1.125,0.190060919137));+#1426=LINE('',#1418,#1276);+#1427=ORIENTED_EDGE('',*,*,#1428,.T.);+#1428=EDGE_CURVE('',#1424,#1429,#1431,.T.);+#1429=VERTEX_POINT('',#1430);+#1430=CARTESIAN_POINT('',(-2.05733068201,-1.125,8.326672684689E-17));+#1431=CIRCLE('',#1432,0.23);+#1432=AXIS2_PLACEMENT_3D('',#1433,#1285,#1286);+#1433=CARTESIAN_POINT('',(-2.05733068201,-1.125,0.23));+#1434=ORIENTED_EDGE('',*,*,#1435,.T.);+#1435=EDGE_CURVE('',#1429,#1436,#1438,.T.);+#1436=VERTEX_POINT('',#1437);+#1437=CARTESIAN_POINT('',(-2.45,-1.125,8.326672684689E-17));+#1438=LINE('',#1430,#502);+#1439=ORIENTED_EDGE('',*,*,#1440,.T.);+#1440=EDGE_CURVE('',#1436,#1441,#1443,.T.);+#1441=VERTEX_POINT('',#1442);+#1442=CARTESIAN_POINT('',(-2.45,-1.125,0.18));+#1443=LINE('',#1437,#336);+#1444=ORIENTED_EDGE('',*,*,#1445,.T.);+#1445=EDGE_CURVE('',#1441,#1446,#1448,.T.);+#1446=VERTEX_POINT('',#1447);+#1447=CARTESIAN_POINT('',(-2.05733068201,-1.125,0.18));+#1448=LINE('',#1442,#453);+#1449=ORIENTED_EDGE('',*,*,#1450,.T.);+#1450=EDGE_CURVE('',#1446,#1451,#1453,.T.);+#1451=VERTEX_POINT('',#1452);+#1452=CARTESIAN_POINT('',(-2.008090294359,-1.125,0.221317591117));+#1453=CIRCLE('',#1454,5.E-02);+#1454=AXIS2_PLACEMENT_3D('',#1433,#1308,#1039);+#1455=ORIENTED_EDGE('',*,*,#1456,.T.);+#1456=EDGE_CURVE('',#1451,#1457,#1459,.T.);+#1457=VERTEX_POINT('',#1458);+#1458=CARTESIAN_POINT('',(-1.976505783193,-1.125,0.424939080863));+#1459=LINE('',#1452,#1314);+#1460=ORIENTED_EDGE('',*,*,#1461,.T.);+#1461=EDGE_CURVE('',#1457,#1462,#1463,.T.);+#1462=VERTEX_POINT('',#1406);+#1463=CIRCLE('',#1464,0.23);+#1464=AXIS2_PLACEMENT_3D('',#1421,#1321,#1322);+#1465=ORIENTED_EDGE('',*,*,#1466,.T.);+#1466=EDGE_CURVE('',#1462,#530,#1405,.T.);+#1467=PLANE('',#1468);+#1468=AXIS2_PLACEMENT_3D('',#1469,#515,#13);+#1469=CARTESIAN_POINT('',(-1.90066971159,-1.125,0.308518045934));+#1470=ADVANCED_FACE('',(#1471),#1485,.F.);+#1471=FACE_BOUND('',#1472,.F.);+#1472=EDGE_LOOP('',(#1473,#1474,#1481,#1484));+#1473=ORIENTED_EDGE('',*,*,#553,.T.);+#1474=ORIENTED_EDGE('',*,*,#1475,.T.);+#1475=EDGE_CURVE('',#548,#1476,#1478,.T.);+#1476=VERTEX_POINT('',#1477);+#1477=CARTESIAN_POINT('',(-1.799240387651,-0.825,0.393682408883));+#1478=CIRCLE('',#1479,5.E-02);+#1479=AXIS2_PLACEMENT_3D('',#1480,#1269,#1270);+#1480=CARTESIAN_POINT('',(-1.75,-0.825,0.385));+#1481=ORIENTED_EDGE('',*,*,#1482,.F.);+#1482=EDGE_CURVE('',#1417,#1476,#1483,.T.);+#1483=LINE('',#1418,#514);+#1484=ORIENTED_EDGE('',*,*,#1416,.F.);+#1485=CYLINDRICAL_SURFACE('',#1486,5.E-02);+#1486=AXIS2_PLACEMENT_3D('',#1421,#1345,#1270);+#1487=ADVANCED_FACE('',(#1488),#1537,.T.);+#1488=FACE_BOUND('',#1489,.T.);+#1489=EDGE_LOOP('',(#560,#546,#1474,#1490,#1495,#1502,#1507,#1512,#1517,#1523,#1528,#1534));+#1490=ORIENTED_EDGE('',*,*,#1491,.T.);+#1491=EDGE_CURVE('',#1476,#1492,#1494,.T.);+#1492=VERTEX_POINT('',#1493);+#1493=CARTESIAN_POINT('',(-1.830824898817,-0.825,0.190060919137));+#1494=LINE('',#1477,#1276);+#1495=ORIENTED_EDGE('',*,*,#1496,.T.);+#1496=EDGE_CURVE('',#1492,#1497,#1499,.T.);+#1497=VERTEX_POINT('',#1498);+#1498=CARTESIAN_POINT('',(-2.05733068201,-0.825,8.326672684689E-17));+#1499=CIRCLE('',#1500,0.23);+#1500=AXIS2_PLACEMENT_3D('',#1501,#1285,#1286);+#1501=CARTESIAN_POINT('',(-2.05733068201,-0.825,0.23));+#1502=ORIENTED_EDGE('',*,*,#1503,.T.);+#1503=EDGE_CURVE('',#1497,#1504,#1506,.T.);+#1504=VERTEX_POINT('',#1505);+#1505=CARTESIAN_POINT('',(-2.45,-0.825,8.326672684689E-17));+#1506=LINE('',#1498,#502);+#1507=ORIENTED_EDGE('',*,*,#1508,.T.);+#1508=EDGE_CURVE('',#1504,#1509,#1511,.T.);+#1509=VERTEX_POINT('',#1510);+#1510=CARTESIAN_POINT('',(-2.45,-0.825,0.18));+#1511=LINE('',#1505,#336);+#1512=ORIENTED_EDGE('',*,*,#1513,.T.);+#1513=EDGE_CURVE('',#1509,#1514,#1516,.T.);+#1514=VERTEX_POINT('',#1515);+#1515=CARTESIAN_POINT('',(-2.05733068201,-0.825,0.18));+#1516=LINE('',#1510,#453);+#1517=ORIENTED_EDGE('',*,*,#1518,.T.);+#1518=EDGE_CURVE('',#1514,#1519,#1521,.T.);+#1519=VERTEX_POINT('',#1520);+#1520=CARTESIAN_POINT('',(-2.008090294359,-0.825,0.221317591117));+#1521=CIRCLE('',#1522,5.E-02);+#1522=AXIS2_PLACEMENT_3D('',#1501,#1308,#1039);+#1523=ORIENTED_EDGE('',*,*,#1524,.T.);+#1524=EDGE_CURVE('',#1519,#1525,#1527,.T.);+#1525=VERTEX_POINT('',#1526);+#1526=CARTESIAN_POINT('',(-1.976505783193,-0.825,0.424939080863));+#1527=LINE('',#1520,#1314);+#1528=ORIENTED_EDGE('',*,*,#1529,.T.);+#1529=EDGE_CURVE('',#1525,#1530,#1532,.T.);+#1530=VERTEX_POINT('',#1531);+#1531=CARTESIAN_POINT('',(-1.75,-0.825,0.615));+#1532=CIRCLE('',#1533,0.23);+#1533=AXIS2_PLACEMENT_3D('',#1480,#1321,#1322);+#1534=ORIENTED_EDGE('',*,*,#1535,.T.);+#1535=EDGE_CURVE('',#1530,#562,#1536,.T.);+#1536=LINE('',#1531,#453);+#1537=PLANE('',#1538);+#1538=AXIS2_PLACEMENT_3D('',#1539,#515,#13);+#1539=CARTESIAN_POINT('',(-1.90066971159,-0.825,0.308518045934));+#1540=ADVANCED_FACE('',(#1541),#459,.F.);+#1541=FACE_BOUND('',#1542,.F.);+#1542=EDGE_LOOP('',(#1543,#1544,#1548,#1549));+#1543=ORIENTED_EDGE('',*,*,#574,.T.);+#1544=ORIENTED_EDGE('',*,*,#1545,.T.);+#1545=EDGE_CURVE('',#569,#1062,#1546,.T.);+#1546=LINE('',#1547,#453);+#1547=CARTESIAN_POINT('',(-1.75,-0.475,0.615));+#1548=ORIENTED_EDGE('',*,*,#1061,.F.);+#1549=ORIENTED_EDGE('',*,*,#1550,.F.);+#1550=EDGE_CURVE('',#562,#1058,#1536,.T.);+#1551=ADVANCED_FACE('',(#1552),#1608,.F.);+#1552=FACE_BOUND('',#1553,.F.);+#1553=EDGE_LOOP('',(#1554,#1555,#1556,#1563,#1568,#1575,#1580,#1585,#1590,#1596,#1601,#1606));+#1554=ORIENTED_EDGE('',*,*,#568,.F.);+#1555=ORIENTED_EDGE('',*,*,#579,.T.);+#1556=ORIENTED_EDGE('',*,*,#1557,.T.);+#1557=EDGE_CURVE('',#580,#1558,#1560,.T.);+#1558=VERTEX_POINT('',#1559);+#1559=CARTESIAN_POINT('',(-1.799240387651,-0.475,0.393682408883));+#1560=CIRCLE('',#1561,5.E-02);+#1561=AXIS2_PLACEMENT_3D('',#1562,#1269,#1270);+#1562=CARTESIAN_POINT('',(-1.75,-0.475,0.385));+#1563=ORIENTED_EDGE('',*,*,#1564,.T.);+#1564=EDGE_CURVE('',#1558,#1565,#1567,.T.);+#1565=VERTEX_POINT('',#1566);+#1566=CARTESIAN_POINT('',(-1.830824898817,-0.475,0.190060919137));+#1567=LINE('',#1559,#1276);+#1568=ORIENTED_EDGE('',*,*,#1569,.T.);+#1569=EDGE_CURVE('',#1565,#1570,#1572,.T.);+#1570=VERTEX_POINT('',#1571);+#1571=CARTESIAN_POINT('',(-2.05733068201,-0.475,8.326672684689E-17));+#1572=CIRCLE('',#1573,0.23);+#1573=AXIS2_PLACEMENT_3D('',#1574,#1285,#1286);+#1574=CARTESIAN_POINT('',(-2.05733068201,-0.475,0.23));+#1575=ORIENTED_EDGE('',*,*,#1576,.T.);+#1576=EDGE_CURVE('',#1570,#1577,#1579,.T.);+#1577=VERTEX_POINT('',#1578);+#1578=CARTESIAN_POINT('',(-2.45,-0.475,8.326672684689E-17));+#1579=LINE('',#1571,#502);+#1580=ORIENTED_EDGE('',*,*,#1581,.T.);+#1581=EDGE_CURVE('',#1577,#1582,#1584,.T.);+#1582=VERTEX_POINT('',#1583);+#1583=CARTESIAN_POINT('',(-2.45,-0.475,0.18));+#1584=LINE('',#1578,#336);+#1585=ORIENTED_EDGE('',*,*,#1586,.T.);+#1586=EDGE_CURVE('',#1582,#1587,#1589,.T.);+#1587=VERTEX_POINT('',#1588);+#1588=CARTESIAN_POINT('',(-2.05733068201,-0.475,0.18));+#1589=LINE('',#1583,#453);+#1590=ORIENTED_EDGE('',*,*,#1591,.T.);+#1591=EDGE_CURVE('',#1587,#1592,#1594,.T.);+#1592=VERTEX_POINT('',#1593);+#1593=CARTESIAN_POINT('',(-2.008090294359,-0.475,0.221317591117));+#1594=CIRCLE('',#1595,5.E-02);+#1595=AXIS2_PLACEMENT_3D('',#1574,#1308,#1039);+#1596=ORIENTED_EDGE('',*,*,#1597,.T.);+#1597=EDGE_CURVE('',#1592,#1598,#1600,.T.);+#1598=VERTEX_POINT('',#1599);+#1599=CARTESIAN_POINT('',(-1.976505783193,-0.475,0.424939080863));+#1600=LINE('',#1593,#1314);+#1601=ORIENTED_EDGE('',*,*,#1602,.T.);+#1602=EDGE_CURVE('',#1598,#1603,#1604,.T.);+#1603=VERTEX_POINT('',#1547);+#1604=CIRCLE('',#1605,0.23);+#1605=AXIS2_PLACEMENT_3D('',#1562,#1321,#1322);+#1606=ORIENTED_EDGE('',*,*,#1607,.T.);+#1607=EDGE_CURVE('',#1603,#569,#1546,.T.);+#1608=PLANE('',#1609);+#1609=AXIS2_PLACEMENT_3D('',#1610,#515,#13);+#1610=CARTESIAN_POINT('',(-1.90066971159,-0.475,0.308518045934));+#1611=ADVANCED_FACE('',(#1612),#1626,.F.);+#1612=FACE_BOUND('',#1613,.F.);+#1613=EDGE_LOOP('',(#1614,#1615,#1622,#1625));+#1614=ORIENTED_EDGE('',*,*,#592,.T.);+#1615=ORIENTED_EDGE('',*,*,#1616,.T.);+#1616=EDGE_CURVE('',#587,#1617,#1619,.T.);+#1617=VERTEX_POINT('',#1618);+#1618=CARTESIAN_POINT('',(-1.799240387651,-0.175,0.393682408883));+#1619=CIRCLE('',#1620,5.E-02);+#1620=AXIS2_PLACEMENT_3D('',#1621,#1269,#1270);+#1621=CARTESIAN_POINT('',(-1.75,-0.175,0.385));+#1622=ORIENTED_EDGE('',*,*,#1623,.F.);+#1623=EDGE_CURVE('',#1558,#1617,#1624,.T.);+#1624=LINE('',#1559,#514);+#1625=ORIENTED_EDGE('',*,*,#1557,.F.);+#1626=CYLINDRICAL_SURFACE('',#1627,5.E-02);+#1627=AXIS2_PLACEMENT_3D('',#1562,#1345,#1270);+#1628=ADVANCED_FACE('',(#1629),#1678,.T.);+#1629=FACE_BOUND('',#1630,.T.);+#1630=EDGE_LOOP('',(#599,#585,#1615,#1631,#1636,#1643,#1648,#1653,#1658,#1664,#1669,#1675));+#1631=ORIENTED_EDGE('',*,*,#1632,.T.);+#1632=EDGE_CURVE('',#1617,#1633,#1635,.T.);+#1633=VERTEX_POINT('',#1634);+#1634=CARTESIAN_POINT('',(-1.830824898817,-0.175,0.190060919137));+#1635=LINE('',#1618,#1276);+#1636=ORIENTED_EDGE('',*,*,#1637,.T.);+#1637=EDGE_CURVE('',#1633,#1638,#1640,.T.);+#1638=VERTEX_POINT('',#1639);+#1639=CARTESIAN_POINT('',(-2.05733068201,-0.175,8.326672684689E-17));+#1640=CIRCLE('',#1641,0.23);+#1641=AXIS2_PLACEMENT_3D('',#1642,#1285,#1286);+#1642=CARTESIAN_POINT('',(-2.05733068201,-0.175,0.23));+#1643=ORIENTED_EDGE('',*,*,#1644,.T.);+#1644=EDGE_CURVE('',#1638,#1645,#1647,.T.);+#1645=VERTEX_POINT('',#1646);+#1646=CARTESIAN_POINT('',(-2.45,-0.175,8.326672684689E-17));+#1647=LINE('',#1639,#502);+#1648=ORIENTED_EDGE('',*,*,#1649,.T.);+#1649=EDGE_CURVE('',#1645,#1650,#1652,.T.);+#1650=VERTEX_POINT('',#1651);+#1651=CARTESIAN_POINT('',(-2.45,-0.175,0.18));+#1652=LINE('',#1646,#336);+#1653=ORIENTED_EDGE('',*,*,#1654,.T.);+#1654=EDGE_CURVE('',#1650,#1655,#1657,.T.);+#1655=VERTEX_POINT('',#1656);+#1656=CARTESIAN_POINT('',(-2.05733068201,-0.175,0.18));+#1657=LINE('',#1651,#453);+#1658=ORIENTED_EDGE('',*,*,#1659,.T.);+#1659=EDGE_CURVE('',#1655,#1660,#1662,.T.);+#1660=VERTEX_POINT('',#1661);+#1661=CARTESIAN_POINT('',(-2.008090294359,-0.175,0.221317591117));+#1662=CIRCLE('',#1663,5.E-02);+#1663=AXIS2_PLACEMENT_3D('',#1642,#1308,#1039);+#1664=ORIENTED_EDGE('',*,*,#1665,.T.);+#1665=EDGE_CURVE('',#1660,#1666,#1668,.T.);+#1666=VERTEX_POINT('',#1667);+#1667=CARTESIAN_POINT('',(-1.976505783193,-0.175,0.424939080863));+#1668=LINE('',#1661,#1314);+#1669=ORIENTED_EDGE('',*,*,#1670,.T.);+#1670=EDGE_CURVE('',#1666,#1671,#1673,.T.);+#1671=VERTEX_POINT('',#1672);+#1672=CARTESIAN_POINT('',(-1.75,-0.175,0.615));+#1673=CIRCLE('',#1674,0.23);+#1674=AXIS2_PLACEMENT_3D('',#1621,#1321,#1322);+#1675=ORIENTED_EDGE('',*,*,#1676,.T.);+#1676=EDGE_CURVE('',#1671,#601,#1677,.T.);+#1677=LINE('',#1672,#453);+#1678=PLANE('',#1679);+#1679=AXIS2_PLACEMENT_3D('',#1680,#515,#13);+#1680=CARTESIAN_POINT('',(-1.90066971159,-0.175,0.308518045934));+#1681=ADVANCED_FACE('',(#1682),#459,.F.);+#1682=FACE_BOUND('',#1683,.F.);+#1683=EDGE_LOOP('',(#1684,#1685,#1689,#1690));+#1684=ORIENTED_EDGE('',*,*,#613,.T.);+#1685=ORIENTED_EDGE('',*,*,#1686,.T.);+#1686=EDGE_CURVE('',#608,#1070,#1687,.T.);+#1687=LINE('',#1688,#453);+#1688=CARTESIAN_POINT('',(-1.75,0.175,0.615));+#1689=ORIENTED_EDGE('',*,*,#1069,.F.);+#1690=ORIENTED_EDGE('',*,*,#1691,.F.);+#1691=EDGE_CURVE('',#601,#1066,#1677,.T.);+#1692=ADVANCED_FACE('',(#1693),#1749,.F.);+#1693=FACE_BOUND('',#1694,.F.);+#1694=EDGE_LOOP('',(#1695,#1696,#1697,#1704,#1709,#1716,#1721,#1726,#1731,#1737,#1742,#1747));+#1695=ORIENTED_EDGE('',*,*,#607,.F.);+#1696=ORIENTED_EDGE('',*,*,#618,.T.);+#1697=ORIENTED_EDGE('',*,*,#1698,.T.);+#1698=EDGE_CURVE('',#619,#1699,#1701,.T.);+#1699=VERTEX_POINT('',#1700);+#1700=CARTESIAN_POINT('',(-1.799240387651,0.175,0.393682408883));+#1701=CIRCLE('',#1702,5.E-02);+#1702=AXIS2_PLACEMENT_3D('',#1703,#1269,#1270);+#1703=CARTESIAN_POINT('',(-1.75,0.175,0.385));+#1704=ORIENTED_EDGE('',*,*,#1705,.T.);+#1705=EDGE_CURVE('',#1699,#1706,#1708,.T.);+#1706=VERTEX_POINT('',#1707);+#1707=CARTESIAN_POINT('',(-1.830824898817,0.175,0.190060919137));+#1708=LINE('',#1700,#1276);+#1709=ORIENTED_EDGE('',*,*,#1710,.T.);+#1710=EDGE_CURVE('',#1706,#1711,#1713,.T.);+#1711=VERTEX_POINT('',#1712);+#1712=CARTESIAN_POINT('',(-2.05733068201,0.175,8.326672684689E-17));+#1713=CIRCLE('',#1714,0.23);+#1714=AXIS2_PLACEMENT_3D('',#1715,#1285,#1286);+#1715=CARTESIAN_POINT('',(-2.05733068201,0.175,0.23));+#1716=ORIENTED_EDGE('',*,*,#1717,.T.);+#1717=EDGE_CURVE('',#1711,#1718,#1720,.T.);+#1718=VERTEX_POINT('',#1719);+#1719=CARTESIAN_POINT('',(-2.45,0.175,8.326672684689E-17));+#1720=LINE('',#1712,#502);+#1721=ORIENTED_EDGE('',*,*,#1722,.T.);+#1722=EDGE_CURVE('',#1718,#1723,#1725,.T.);+#1723=VERTEX_POINT('',#1724);+#1724=CARTESIAN_POINT('',(-2.45,0.175,0.18));+#1725=LINE('',#1719,#336);+#1726=ORIENTED_EDGE('',*,*,#1727,.T.);+#1727=EDGE_CURVE('',#1723,#1728,#1730,.T.);+#1728=VERTEX_POINT('',#1729);+#1729=CARTESIAN_POINT('',(-2.05733068201,0.175,0.18));+#1730=LINE('',#1724,#453);+#1731=ORIENTED_EDGE('',*,*,#1732,.T.);+#1732=EDGE_CURVE('',#1728,#1733,#1735,.T.);+#1733=VERTEX_POINT('',#1734);+#1734=CARTESIAN_POINT('',(-2.008090294359,0.175,0.221317591117));+#1735=CIRCLE('',#1736,5.E-02);+#1736=AXIS2_PLACEMENT_3D('',#1715,#1308,#1039);+#1737=ORIENTED_EDGE('',*,*,#1738,.T.);+#1738=EDGE_CURVE('',#1733,#1739,#1741,.T.);+#1739=VERTEX_POINT('',#1740);+#1740=CARTESIAN_POINT('',(-1.976505783193,0.175,0.424939080863));+#1741=LINE('',#1734,#1314);+#1742=ORIENTED_EDGE('',*,*,#1743,.T.);+#1743=EDGE_CURVE('',#1739,#1744,#1745,.T.);+#1744=VERTEX_POINT('',#1688);+#1745=CIRCLE('',#1746,0.23);+#1746=AXIS2_PLACEMENT_3D('',#1703,#1321,#1322);+#1747=ORIENTED_EDGE('',*,*,#1748,.T.);+#1748=EDGE_CURVE('',#1744,#608,#1687,.T.);+#1749=PLANE('',#1750);+#1750=AXIS2_PLACEMENT_3D('',#1751,#515,#13);+#1751=CARTESIAN_POINT('',(-1.90066971159,0.175,0.308518045934));+#1752=ADVANCED_FACE('',(#1753),#1767,.F.);+#1753=FACE_BOUND('',#1754,.F.);+#1754=EDGE_LOOP('',(#1755,#1756,#1763,#1766));+#1755=ORIENTED_EDGE('',*,*,#631,.T.);+#1756=ORIENTED_EDGE('',*,*,#1757,.T.);+#1757=EDGE_CURVE('',#626,#1758,#1760,.T.);+#1758=VERTEX_POINT('',#1759);+#1759=CARTESIAN_POINT('',(-1.799240387651,0.475,0.393682408883));+#1760=CIRCLE('',#1761,5.E-02);+#1761=AXIS2_PLACEMENT_3D('',#1762,#1269,#1270);+#1762=CARTESIAN_POINT('',(-1.75,0.475,0.385));+#1763=ORIENTED_EDGE('',*,*,#1764,.F.);+#1764=EDGE_CURVE('',#1699,#1758,#1765,.T.);+#1765=LINE('',#1700,#514);+#1766=ORIENTED_EDGE('',*,*,#1698,.F.);+#1767=CYLINDRICAL_SURFACE('',#1768,5.E-02);+#1768=AXIS2_PLACEMENT_3D('',#1703,#1345,#1270);+#1769=ADVANCED_FACE('',(#1770),#1819,.T.);+#1770=FACE_BOUND('',#1771,.T.);+#1771=EDGE_LOOP('',(#638,#624,#1756,#1772,#1777,#1784,#1789,#1794,#1799,#1805,#1810,#1816));+#1772=ORIENTED_EDGE('',*,*,#1773,.T.);+#1773=EDGE_CURVE('',#1758,#1774,#1776,.T.);+#1774=VERTEX_POINT('',#1775);+#1775=CARTESIAN_POINT('',(-1.830824898817,0.475,0.190060919137));+#1776=LINE('',#1759,#1276);+#1777=ORIENTED_EDGE('',*,*,#1778,.T.);+#1778=EDGE_CURVE('',#1774,#1779,#1781,.T.);+#1779=VERTEX_POINT('',#1780);+#1780=CARTESIAN_POINT('',(-2.05733068201,0.475,8.326672684689E-17));+#1781=CIRCLE('',#1782,0.23);+#1782=AXIS2_PLACEMENT_3D('',#1783,#1285,#1286);+#1783=CARTESIAN_POINT('',(-2.05733068201,0.475,0.23));+#1784=ORIENTED_EDGE('',*,*,#1785,.T.);+#1785=EDGE_CURVE('',#1779,#1786,#1788,.T.);+#1786=VERTEX_POINT('',#1787);+#1787=CARTESIAN_POINT('',(-2.45,0.475,8.326672684689E-17));+#1788=LINE('',#1780,#502);+#1789=ORIENTED_EDGE('',*,*,#1790,.T.);+#1790=EDGE_CURVE('',#1786,#1791,#1793,.T.);+#1791=VERTEX_POINT('',#1792);+#1792=CARTESIAN_POINT('',(-2.45,0.475,0.18));+#1793=LINE('',#1787,#336);+#1794=ORIENTED_EDGE('',*,*,#1795,.T.);+#1795=EDGE_CURVE('',#1791,#1796,#1798,.T.);+#1796=VERTEX_POINT('',#1797);+#1797=CARTESIAN_POINT('',(-2.05733068201,0.475,0.18));+#1798=LINE('',#1792,#453);+#1799=ORIENTED_EDGE('',*,*,#1800,.T.);+#1800=EDGE_CURVE('',#1796,#1801,#1803,.T.);+#1801=VERTEX_POINT('',#1802);+#1802=CARTESIAN_POINT('',(-2.008090294359,0.475,0.221317591117));+#1803=CIRCLE('',#1804,5.E-02);+#1804=AXIS2_PLACEMENT_3D('',#1783,#1308,#1039);+#1805=ORIENTED_EDGE('',*,*,#1806,.T.);+#1806=EDGE_CURVE('',#1801,#1807,#1809,.T.);+#1807=VERTEX_POINT('',#1808);+#1808=CARTESIAN_POINT('',(-1.976505783193,0.475,0.424939080863));+#1809=LINE('',#1802,#1314);+#1810=ORIENTED_EDGE('',*,*,#1811,.T.);+#1811=EDGE_CURVE('',#1807,#1812,#1814,.T.);+#1812=VERTEX_POINT('',#1813);+#1813=CARTESIAN_POINT('',(-1.75,0.475,0.615));+#1814=CIRCLE('',#1815,0.23);+#1815=AXIS2_PLACEMENT_3D('',#1762,#1321,#1322);+#1816=ORIENTED_EDGE('',*,*,#1817,.T.);+#1817=EDGE_CURVE('',#1812,#640,#1818,.T.);+#1818=LINE('',#1813,#453);+#1819=PLANE('',#1820);+#1820=AXIS2_PLACEMENT_3D('',#1821,#515,#13);+#1821=CARTESIAN_POINT('',(-1.90066971159,0.475,0.308518045934));+#1822=ADVANCED_FACE('',(#1823),#459,.F.);+#1823=FACE_BOUND('',#1824,.F.);+#1824=EDGE_LOOP('',(#1825,#1826,#1830,#1831));+#1825=ORIENTED_EDGE('',*,*,#652,.T.);+#1826=ORIENTED_EDGE('',*,*,#1827,.T.);+#1827=EDGE_CURVE('',#647,#1078,#1828,.T.);+#1828=LINE('',#1829,#453);+#1829=CARTESIAN_POINT('',(-1.75,0.825,0.615));+#1830=ORIENTED_EDGE('',*,*,#1077,.F.);+#1831=ORIENTED_EDGE('',*,*,#1832,.F.);+#1832=EDGE_CURVE('',#640,#1074,#1818,.T.);+#1833=ADVANCED_FACE('',(#1834),#1890,.F.);+#1834=FACE_BOUND('',#1835,.F.);+#1835=EDGE_LOOP('',(#1836,#1837,#1838,#1845,#1850,#1857,#1862,#1867,#1872,#1878,#1883,#1888));+#1836=ORIENTED_EDGE('',*,*,#646,.F.);+#1837=ORIENTED_EDGE('',*,*,#657,.T.);+#1838=ORIENTED_EDGE('',*,*,#1839,.T.);+#1839=EDGE_CURVE('',#658,#1840,#1842,.T.);+#1840=VERTEX_POINT('',#1841);+#1841=CARTESIAN_POINT('',(-1.799240387651,0.825,0.393682408883));+#1842=CIRCLE('',#1843,5.E-02);+#1843=AXIS2_PLACEMENT_3D('',#1844,#1269,#1270);+#1844=CARTESIAN_POINT('',(-1.75,0.825,0.385));+#1845=ORIENTED_EDGE('',*,*,#1846,.T.);+#1846=EDGE_CURVE('',#1840,#1847,#1849,.T.);+#1847=VERTEX_POINT('',#1848);+#1848=CARTESIAN_POINT('',(-1.830824898817,0.825,0.190060919137));+#1849=LINE('',#1841,#1276);+#1850=ORIENTED_EDGE('',*,*,#1851,.T.);+#1851=EDGE_CURVE('',#1847,#1852,#1854,.T.);+#1852=VERTEX_POINT('',#1853);+#1853=CARTESIAN_POINT('',(-2.05733068201,0.825,8.326672684689E-17));+#1854=CIRCLE('',#1855,0.23);+#1855=AXIS2_PLACEMENT_3D('',#1856,#1285,#1286);+#1856=CARTESIAN_POINT('',(-2.05733068201,0.825,0.23));+#1857=ORIENTED_EDGE('',*,*,#1858,.T.);+#1858=EDGE_CURVE('',#1852,#1859,#1861,.T.);+#1859=VERTEX_POINT('',#1860);+#1860=CARTESIAN_POINT('',(-2.45,0.825,8.326672684689E-17));+#1861=LINE('',#1853,#502);+#1862=ORIENTED_EDGE('',*,*,#1863,.T.);+#1863=EDGE_CURVE('',#1859,#1864,#1866,.T.);+#1864=VERTEX_POINT('',#1865);+#1865=CARTESIAN_POINT('',(-2.45,0.825,0.18));+#1866=LINE('',#1860,#336);+#1867=ORIENTED_EDGE('',*,*,#1868,.T.);+#1868=EDGE_CURVE('',#1864,#1869,#1871,.T.);+#1869=VERTEX_POINT('',#1870);+#1870=CARTESIAN_POINT('',(-2.05733068201,0.825,0.18));+#1871=LINE('',#1865,#453);+#1872=ORIENTED_EDGE('',*,*,#1873,.T.);+#1873=EDGE_CURVE('',#1869,#1874,#1876,.T.);+#1874=VERTEX_POINT('',#1875);+#1875=CARTESIAN_POINT('',(-2.008090294359,0.825,0.221317591117));+#1876=CIRCLE('',#1877,5.E-02);+#1877=AXIS2_PLACEMENT_3D('',#1856,#1308,#1039);+#1878=ORIENTED_EDGE('',*,*,#1879,.T.);+#1879=EDGE_CURVE('',#1874,#1880,#1882,.T.);+#1880=VERTEX_POINT('',#1881);+#1881=CARTESIAN_POINT('',(-1.976505783193,0.825,0.424939080863));+#1882=LINE('',#1875,#1314);+#1883=ORIENTED_EDGE('',*,*,#1884,.T.);+#1884=EDGE_CURVE('',#1880,#1885,#1886,.T.);+#1885=VERTEX_POINT('',#1829);+#1886=CIRCLE('',#1887,0.23);+#1887=AXIS2_PLACEMENT_3D('',#1844,#1321,#1322);+#1888=ORIENTED_EDGE('',*,*,#1889,.T.);+#1889=EDGE_CURVE('',#1885,#647,#1828,.T.);+#1890=PLANE('',#1891);+#1891=AXIS2_PLACEMENT_3D('',#1892,#515,#13);+#1892=CARTESIAN_POINT('',(-1.90066971159,0.825,0.308518045934));+#1893=ADVANCED_FACE('',(#1894),#1908,.F.);+#1894=FACE_BOUND('',#1895,.F.);+#1895=EDGE_LOOP('',(#1896,#1897,#1904,#1907));+#1896=ORIENTED_EDGE('',*,*,#670,.T.);+#1897=ORIENTED_EDGE('',*,*,#1898,.T.);+#1898=EDGE_CURVE('',#665,#1899,#1901,.T.);+#1899=VERTEX_POINT('',#1900);+#1900=CARTESIAN_POINT('',(-1.799240387651,1.125,0.393682408883));+#1901=CIRCLE('',#1902,5.E-02);+#1902=AXIS2_PLACEMENT_3D('',#1903,#1269,#1270);+#1903=CARTESIAN_POINT('',(-1.75,1.125,0.385));+#1904=ORIENTED_EDGE('',*,*,#1905,.F.);+#1905=EDGE_CURVE('',#1840,#1899,#1906,.T.);+#1906=LINE('',#1841,#514);+#1907=ORIENTED_EDGE('',*,*,#1839,.F.);+#1908=CYLINDRICAL_SURFACE('',#1909,5.E-02);+#1909=AXIS2_PLACEMENT_3D('',#1844,#1345,#1270);+#1910=ADVANCED_FACE('',(#1911),#1960,.T.);+#1911=FACE_BOUND('',#1912,.T.);+#1912=EDGE_LOOP('',(#677,#663,#1897,#1913,#1918,#1925,#1930,#1935,#1940,#1946,#1951,#1957));+#1913=ORIENTED_EDGE('',*,*,#1914,.T.);+#1914=EDGE_CURVE('',#1899,#1915,#1917,.T.);+#1915=VERTEX_POINT('',#1916);+#1916=CARTESIAN_POINT('',(-1.830824898817,1.125,0.190060919137));+#1917=LINE('',#1900,#1276);+#1918=ORIENTED_EDGE('',*,*,#1919,.T.);+#1919=EDGE_CURVE('',#1915,#1920,#1922,.T.);+#1920=VERTEX_POINT('',#1921);+#1921=CARTESIAN_POINT('',(-2.05733068201,1.125,8.326672684689E-17));+#1922=CIRCLE('',#1923,0.23);+#1923=AXIS2_PLACEMENT_3D('',#1924,#1285,#1286);+#1924=CARTESIAN_POINT('',(-2.05733068201,1.125,0.23));+#1925=ORIENTED_EDGE('',*,*,#1926,.T.);+#1926=EDGE_CURVE('',#1920,#1927,#1929,.T.);+#1927=VERTEX_POINT('',#1928);+#1928=CARTESIAN_POINT('',(-2.45,1.125,8.326672684689E-17));+#1929=LINE('',#1921,#502);+#1930=ORIENTED_EDGE('',*,*,#1931,.T.);+#1931=EDGE_CURVE('',#1927,#1932,#1934,.T.);+#1932=VERTEX_POINT('',#1933);+#1933=CARTESIAN_POINT('',(-2.45,1.125,0.18));+#1934=LINE('',#1928,#336);+#1935=ORIENTED_EDGE('',*,*,#1936,.T.);+#1936=EDGE_CURVE('',#1932,#1937,#1939,.T.);+#1937=VERTEX_POINT('',#1938);+#1938=CARTESIAN_POINT('',(-2.05733068201,1.125,0.18));+#1939=LINE('',#1933,#453);+#1940=ORIENTED_EDGE('',*,*,#1941,.T.);+#1941=EDGE_CURVE('',#1937,#1942,#1944,.T.);+#1942=VERTEX_POINT('',#1943);+#1943=CARTESIAN_POINT('',(-2.008090294359,1.125,0.221317591117));+#1944=CIRCLE('',#1945,5.E-02);+#1945=AXIS2_PLACEMENT_3D('',#1924,#1308,#1039);+#1946=ORIENTED_EDGE('',*,*,#1947,.T.);+#1947=EDGE_CURVE('',#1942,#1948,#1950,.T.);+#1948=VERTEX_POINT('',#1949);+#1949=CARTESIAN_POINT('',(-1.976505783193,1.125,0.424939080863));+#1950=LINE('',#1943,#1314);+#1951=ORIENTED_EDGE('',*,*,#1952,.T.);+#1952=EDGE_CURVE('',#1948,#1953,#1955,.T.);+#1953=VERTEX_POINT('',#1954);+#1954=CARTESIAN_POINT('',(-1.75,1.125,0.615));+#1955=CIRCLE('',#1956,0.23);+#1956=AXIS2_PLACEMENT_3D('',#1903,#1321,#1322);+#1957=ORIENTED_EDGE('',*,*,#1958,.T.);+#1958=EDGE_CURVE('',#1953,#679,#1959,.T.);+#1959=LINE('',#1954,#453);+#1960=PLANE('',#1961);+#1961=AXIS2_PLACEMENT_3D('',#1962,#515,#13);+#1962=CARTESIAN_POINT('',(-1.90066971159,1.125,0.308518045934));+#1963=ADVANCED_FACE('',(#1964),#459,.F.);+#1964=FACE_BOUND('',#1965,.F.);+#1965=EDGE_LOOP('',(#1966,#1967,#1968,#1969));+#1966=ORIENTED_EDGE('',*,*,#691,.T.);+#1967=ORIENTED_EDGE('',*,*,#1036,.T.);+#1968=ORIENTED_EDGE('',*,*,#1085,.F.);+#1969=ORIENTED_EDGE('',*,*,#1970,.F.);+#1970=EDGE_CURVE('',#679,#1082,#1959,.T.);+#1971=ADVANCED_FACE('',(#1972),#2026,.F.);+#1972=FACE_BOUND('',#1973,.F.);+#1973=EDGE_LOOP('',(#1974,#1975,#1976,#1983,#1988,#1995,#2000,#2005,#2010,#2016,#2021,#2025));+#1974=ORIENTED_EDGE('',*,*,#685,.F.);+#1975=ORIENTED_EDGE('',*,*,#696,.T.);+#1976=ORIENTED_EDGE('',*,*,#1977,.T.);+#1977=EDGE_CURVE('',#697,#1978,#1980,.T.);+#1978=VERTEX_POINT('',#1979);+#1979=CARTESIAN_POINT('',(-1.799240387651,1.475,0.393682408883));+#1980=CIRCLE('',#1981,5.E-02);+#1981=AXIS2_PLACEMENT_3D('',#1982,#1269,#1270);+#1982=CARTESIAN_POINT('',(-1.75,1.475,0.385));+#1983=ORIENTED_EDGE('',*,*,#1984,.T.);+#1984=EDGE_CURVE('',#1978,#1985,#1987,.T.);+#1985=VERTEX_POINT('',#1986);+#1986=CARTESIAN_POINT('',(-1.830824898817,1.475,0.190060919137));+#1987=LINE('',#1979,#1276);+#1988=ORIENTED_EDGE('',*,*,#1989,.T.);+#1989=EDGE_CURVE('',#1985,#1990,#1992,.T.);+#1990=VERTEX_POINT('',#1991);+#1991=CARTESIAN_POINT('',(-2.05733068201,1.475,8.326672684689E-17));+#1992=CIRCLE('',#1993,0.23);+#1993=AXIS2_PLACEMENT_3D('',#1994,#1285,#1286);+#1994=CARTESIAN_POINT('',(-2.05733068201,1.475,0.23));+#1995=ORIENTED_EDGE('',*,*,#1996,.T.);+#1996=EDGE_CURVE('',#1990,#1997,#1999,.T.);+#1997=VERTEX_POINT('',#1998);+#1998=CARTESIAN_POINT('',(-2.45,1.475,8.326672684689E-17));+#1999=LINE('',#1991,#502);+#2000=ORIENTED_EDGE('',*,*,#2001,.T.);+#2001=EDGE_CURVE('',#1997,#2002,#2004,.T.);+#2002=VERTEX_POINT('',#2003);+#2003=CARTESIAN_POINT('',(-2.45,1.475,0.18));+#2004=LINE('',#1998,#336);+#2005=ORIENTED_EDGE('',*,*,#2006,.T.);+#2006=EDGE_CURVE('',#2002,#2007,#2009,.T.);+#2007=VERTEX_POINT('',#2008);+#2008=CARTESIAN_POINT('',(-2.05733068201,1.475,0.18));+#2009=LINE('',#2003,#453);+#2010=ORIENTED_EDGE('',*,*,#2011,.T.);+#2011=EDGE_CURVE('',#2007,#2012,#2014,.T.);+#2012=VERTEX_POINT('',#2013);+#2013=CARTESIAN_POINT('',(-2.008090294359,1.475,0.221317591117));+#2014=CIRCLE('',#2015,5.E-02);+#2015=AXIS2_PLACEMENT_3D('',#1994,#1308,#1039);+#2016=ORIENTED_EDGE('',*,*,#2017,.T.);+#2017=EDGE_CURVE('',#2012,#2018,#2020,.T.);+#2018=VERTEX_POINT('',#2019);+#2019=CARTESIAN_POINT('',(-1.976505783193,1.475,0.424939080863));+#2020=LINE('',#2013,#1314);+#2021=ORIENTED_EDGE('',*,*,#2022,.T.);+#2022=EDGE_CURVE('',#2018,#1021,#2023,.T.);+#2023=CIRCLE('',#2024,0.23);+#2024=AXIS2_PLACEMENT_3D('',#1982,#1321,#1322);+#2025=ORIENTED_EDGE('',*,*,#1020,.T.);+#2026=PLANE('',#2027);+#2027=AXIS2_PLACEMENT_3D('',#2028,#515,#13);+#2028=CARTESIAN_POINT('',(-1.90066971159,1.475,0.308518045934));+#2029=ADVANCED_FACE('',(#2030),#2044,.F.);+#2030=FACE_BOUND('',#2031,.F.);+#2031=EDGE_LOOP('',(#2032,#2033,#2040,#2043));+#2032=ORIENTED_EDGE('',*,*,#709,.T.);+#2033=ORIENTED_EDGE('',*,*,#2034,.T.);+#2034=EDGE_CURVE('',#704,#2035,#2037,.T.);+#2035=VERTEX_POINT('',#2036);+#2036=CARTESIAN_POINT('',(-1.799240387651,1.775,0.393682408883));+#2037=CIRCLE('',#2038,5.E-02);+#2038=AXIS2_PLACEMENT_3D('',#2039,#1269,#1270);+#2039=CARTESIAN_POINT('',(-1.75,1.775,0.385));+#2040=ORIENTED_EDGE('',*,*,#2041,.F.);+#2041=EDGE_CURVE('',#1978,#2035,#2042,.T.);+#2042=LINE('',#1979,#514);+#2043=ORIENTED_EDGE('',*,*,#1977,.F.);+#2044=CYLINDRICAL_SURFACE('',#2045,5.E-02);+#2045=AXIS2_PLACEMENT_3D('',#1982,#1345,#1270);+#2046=ADVANCED_FACE('',(#2047),#2091,.T.);+#2047=FACE_BOUND('',#2048,.T.);+#2048=EDGE_LOOP('',(#716,#702,#2033,#2049,#2054,#2061,#2066,#2071,#2076,#2082,#2087,#1028));+#2049=ORIENTED_EDGE('',*,*,#2050,.T.);+#2050=EDGE_CURVE('',#2035,#2051,#2053,.T.);+#2051=VERTEX_POINT('',#2052);+#2052=CARTESIAN_POINT('',(-1.830824898817,1.775,0.190060919137));+#2053=LINE('',#2036,#1276);+#2054=ORIENTED_EDGE('',*,*,#2055,.T.);+#2055=EDGE_CURVE('',#2051,#2056,#2058,.T.);+#2056=VERTEX_POINT('',#2057);+#2057=CARTESIAN_POINT('',(-2.05733068201,1.775,8.326672684689E-17));+#2058=CIRCLE('',#2059,0.23);+#2059=AXIS2_PLACEMENT_3D('',#2060,#1285,#1286);+#2060=CARTESIAN_POINT('',(-2.05733068201,1.775,0.23));+#2061=ORIENTED_EDGE('',*,*,#2062,.T.);+#2062=EDGE_CURVE('',#2056,#2063,#2065,.T.);+#2063=VERTEX_POINT('',#2064);+#2064=CARTESIAN_POINT('',(-2.45,1.775,8.326672684689E-17));+#2065=LINE('',#2057,#502);+#2066=ORIENTED_EDGE('',*,*,#2067,.T.);+#2067=EDGE_CURVE('',#2063,#2068,#2070,.T.);+#2068=VERTEX_POINT('',#2069);+#2069=CARTESIAN_POINT('',(-2.45,1.775,0.18));+#2070=LINE('',#2064,#336);+#2071=ORIENTED_EDGE('',*,*,#2072,.T.);+#2072=EDGE_CURVE('',#2068,#2073,#2075,.T.);+#2073=VERTEX_POINT('',#2074);+#2074=CARTESIAN_POINT('',(-2.05733068201,1.775,0.18));+#2075=LINE('',#2069,#453);+#2076=ORIENTED_EDGE('',*,*,#2077,.T.);+#2077=EDGE_CURVE('',#2073,#2078,#2080,.T.);+#2078=VERTEX_POINT('',#2079);+#2079=CARTESIAN_POINT('',(-2.008090294359,1.775,0.221317591117));+#2080=CIRCLE('',#2081,5.E-02);+#2081=AXIS2_PLACEMENT_3D('',#2060,#1308,#1039);+#2082=ORIENTED_EDGE('',*,*,#2083,.T.);+#2083=EDGE_CURVE('',#2078,#2084,#2086,.T.);+#2084=VERTEX_POINT('',#2085);+#2085=CARTESIAN_POINT('',(-1.976505783193,1.775,0.424939080863));+#2086=LINE('',#2079,#1314);+#2087=ORIENTED_EDGE('',*,*,#2088,.T.);+#2088=EDGE_CURVE('',#2084,#1026,#2089,.T.);+#2089=CIRCLE('',#2090,0.23);+#2090=AXIS2_PLACEMENT_3D('',#2039,#1321,#1322);+#2091=PLANE('',#2092);+#2092=AXIS2_PLACEMENT_3D('',#2093,#515,#13);+#2093=CARTESIAN_POINT('',(-1.90066971159,1.775,0.308518045934));+#2094=ADVANCED_FACE('',(#2095),#2156,.F.);+#2095=FACE_BOUND('',#2096,.F.);+#2096=EDGE_LOOP('',(#2097,#2098,#2099,#2107,#2114,#2122,#2127,#2132,#2137,#2143,#2150,#2155));+#2097=ORIENTED_EDGE('',*,*,#729,.F.);+#2098=ORIENTED_EDGE('',*,*,#739,.T.);+#2099=ORIENTED_EDGE('',*,*,#2100,.T.);+#2100=EDGE_CURVE('',#740,#2101,#2103,.T.);+#2101=VERTEX_POINT('',#2102);+#2102=CARTESIAN_POINT('',(1.799240387651,1.775,0.393682408883));+#2103=CIRCLE('',#2104,5.E-02);+#2104=AXIS2_PLACEMENT_3D('',#2105,#60,#2106);+#2105=CARTESIAN_POINT('',(1.75,1.775,0.385));+#2106=DIRECTION('',(-4.440892098501E-15,-4.930380657631E-31,1.));+#2107=ORIENTED_EDGE('',*,*,#2108,.T.);+#2108=EDGE_CURVE('',#2101,#2109,#2111,.T.);+#2109=VERTEX_POINT('',#2110);+#2110=CARTESIAN_POINT('',(1.830824898817,1.775,0.190060919137));+#2111=LINE('',#2102,#2112);+#2112=VECTOR('',#2113,1.);+#2113=DIRECTION('',(0.153280808835,1.701758832022E-17,-0.988182672203));+#2114=ORIENTED_EDGE('',*,*,#2115,.T.);+#2115=EDGE_CURVE('',#2109,#2116,#2118,.T.);+#2116=VERTEX_POINT('',#2117);+#2117=CARTESIAN_POINT('',(2.05733068201,1.775,8.326672684689E-17));+#2118=CIRCLE('',#2119,0.23);+#2119=AXIS2_PLACEMENT_3D('',#2120,#88,#2121);+#2120=CARTESIAN_POINT('',(2.05733068201,1.775,0.23));+#2121=DIRECTION('',(-0.984807753012,-1.093356242224E-16,-0.173648177667));+#2122=ORIENTED_EDGE('',*,*,#2123,.T.);+#2123=EDGE_CURVE('',#2116,#2124,#2126,.T.);+#2124=VERTEX_POINT('',#2125);+#2125=CARTESIAN_POINT('',(2.45,1.775,8.326672684689E-17));+#2126=LINE('',#2117,#27);+#2127=ORIENTED_EDGE('',*,*,#2128,.T.);+#2128=EDGE_CURVE('',#2124,#2129,#2131,.T.);+#2129=VERTEX_POINT('',#2130);+#2130=CARTESIAN_POINT('',(2.45,1.775,0.18));+#2131=LINE('',#2125,#336);+#2132=ORIENTED_EDGE('',*,*,#2133,.T.);+#2133=EDGE_CURVE('',#2129,#2134,#2136,.T.);+#2134=VERTEX_POINT('',#2135);+#2135=CARTESIAN_POINT('',(2.05733068201,1.775,0.18));+#2136=LINE('',#2130,#73);+#2137=ORIENTED_EDGE('',*,*,#2138,.T.);+#2138=EDGE_CURVE('',#2134,#2139,#2141,.T.);+#2139=VERTEX_POINT('',#2140);+#2140=CARTESIAN_POINT('',(2.008090294359,1.775,0.221317591117));+#2141=CIRCLE('',#2142,5.E-02);+#2142=AXIS2_PLACEMENT_3D('',#2120,#60,#1039);+#2143=ORIENTED_EDGE('',*,*,#2144,.T.);+#2144=EDGE_CURVE('',#2139,#2145,#2147,.T.);+#2145=VERTEX_POINT('',#2146);+#2146=CARTESIAN_POINT('',(1.976505783193,1.775,0.424939080863));+#2147=LINE('',#2140,#2148);+#2148=VECTOR('',#2149,1.);+#2149=DIRECTION('',(-0.153280808835,-1.701758832022E-17,0.988182672203));+#2150=ORIENTED_EDGE('',*,*,#2151,.T.);+#2151=EDGE_CURVE('',#2145,#1211,#2152,.T.);+#2152=CIRCLE('',#2153,0.23);+#2153=AXIS2_PLACEMENT_3D('',#2105,#88,#2154);+#2154=DIRECTION('',(0.984807753012,1.093356242224E-16,0.173648177667));+#2155=ORIENTED_EDGE('',*,*,#1210,.T.);+#2156=PLANE('',#2157);+#2157=AXIS2_PLACEMENT_3D('',#2158,#88,#13);+#2158=CARTESIAN_POINT('',(1.90066971159,1.775,0.308518045934));+#2159=ADVANCED_FACE('',(#2160),#2174,.F.);+#2160=FACE_BOUND('',#2161,.F.);+#2161=EDGE_LOOP('',(#2162,#2163,#2170,#2173));+#2162=ORIENTED_EDGE('',*,*,#752,.T.);+#2163=ORIENTED_EDGE('',*,*,#2164,.T.);+#2164=EDGE_CURVE('',#747,#2165,#2167,.T.);+#2165=VERTEX_POINT('',#2166);+#2166=CARTESIAN_POINT('',(1.799240387651,1.475,0.393682408883));+#2167=CIRCLE('',#2168,5.E-02);+#2168=AXIS2_PLACEMENT_3D('',#2169,#60,#2106);+#2169=CARTESIAN_POINT('',(1.75,1.475,0.385));+#2170=ORIENTED_EDGE('',*,*,#2171,.F.);+#2171=EDGE_CURVE('',#2101,#2165,#2172,.T.);+#2172=LINE('',#2102,#87);+#2173=ORIENTED_EDGE('',*,*,#2100,.F.);+#2174=CYLINDRICAL_SURFACE('',#2104,5.E-02);+#2175=ADVANCED_FACE('',(#2176),#2220,.T.);+#2176=FACE_BOUND('',#2177,.T.);+#2177=EDGE_LOOP('',(#759,#745,#2163,#2178,#2183,#2190,#2195,#2200,#2205,#2211,#2216,#1217));+#2178=ORIENTED_EDGE('',*,*,#2179,.T.);+#2179=EDGE_CURVE('',#2165,#2180,#2182,.T.);+#2180=VERTEX_POINT('',#2181);+#2181=CARTESIAN_POINT('',(1.830824898817,1.475,0.190060919137));+#2182=LINE('',#2166,#2112);+#2183=ORIENTED_EDGE('',*,*,#2184,.T.);+#2184=EDGE_CURVE('',#2180,#2185,#2187,.T.);+#2185=VERTEX_POINT('',#2186);+#2186=CARTESIAN_POINT('',(2.05733068201,1.475,8.326672684689E-17));+#2187=CIRCLE('',#2188,0.23);+#2188=AXIS2_PLACEMENT_3D('',#2189,#88,#2121);+#2189=CARTESIAN_POINT('',(2.05733068201,1.475,0.23));+#2190=ORIENTED_EDGE('',*,*,#2191,.T.);+#2191=EDGE_CURVE('',#2185,#2192,#2194,.T.);+#2192=VERTEX_POINT('',#2193);+#2193=CARTESIAN_POINT('',(2.45,1.475,8.326672684689E-17));+#2194=LINE('',#2186,#27);+#2195=ORIENTED_EDGE('',*,*,#2196,.T.);+#2196=EDGE_CURVE('',#2192,#2197,#2199,.T.);+#2197=VERTEX_POINT('',#2198);+#2198=CARTESIAN_POINT('',(2.45,1.475,0.18));+#2199=LINE('',#2193,#336);+#2200=ORIENTED_EDGE('',*,*,#2201,.T.);+#2201=EDGE_CURVE('',#2197,#2202,#2204,.T.);+#2202=VERTEX_POINT('',#2203);+#2203=CARTESIAN_POINT('',(2.05733068201,1.475,0.18));+#2204=LINE('',#2198,#73);+#2205=ORIENTED_EDGE('',*,*,#2206,.T.);+#2206=EDGE_CURVE('',#2202,#2207,#2209,.T.);+#2207=VERTEX_POINT('',#2208);+#2208=CARTESIAN_POINT('',(2.008090294359,1.475,0.221317591117));+#2209=CIRCLE('',#2210,5.E-02);+#2210=AXIS2_PLACEMENT_3D('',#2189,#60,#1039);+#2211=ORIENTED_EDGE('',*,*,#2212,.T.);+#2212=EDGE_CURVE('',#2207,#2213,#2215,.T.);+#2213=VERTEX_POINT('',#2214);+#2214=CARTESIAN_POINT('',(1.976505783193,1.475,0.424939080863));+#2215=LINE('',#2208,#2148);+#2216=ORIENTED_EDGE('',*,*,#2217,.T.);+#2217=EDGE_CURVE('',#2213,#1214,#2218,.T.);+#2218=CIRCLE('',#2219,0.23);+#2219=AXIS2_PLACEMENT_3D('',#2169,#88,#2154);+#2220=PLANE('',#2221);+#2221=AXIS2_PLACEMENT_3D('',#2222,#88,#13);+#2222=CARTESIAN_POINT('',(1.90066971159,1.475,0.308518045934));+#2223=ADVANCED_FACE('',(#2224),#459,.F.);+#2224=FACE_BOUND('',#2225,.F.);+#2225=EDGE_LOOP('',(#2226,#2227,#2228,#2232));+#2226=ORIENTED_EDGE('',*,*,#1221,.F.);+#2227=ORIENTED_EDGE('',*,*,#773,.T.);+#2228=ORIENTED_EDGE('',*,*,#2229,.T.);+#2229=EDGE_CURVE('',#768,#1154,#2230,.T.);+#2230=LINE('',#2231,#73);+#2231=CARTESIAN_POINT('',(1.75,1.125,0.615));+#2232=ORIENTED_EDGE('',*,*,#1153,.F.);+#2233=ADVANCED_FACE('',(#2234),#2290,.F.);+#2234=FACE_BOUND('',#2235,.F.);+#2235=EDGE_LOOP('',(#2236,#2237,#2238,#2245,#2250,#2257,#2262,#2267,#2272,#2278,#2283,#2288));+#2236=ORIENTED_EDGE('',*,*,#767,.F.);+#2237=ORIENTED_EDGE('',*,*,#778,.T.);+#2238=ORIENTED_EDGE('',*,*,#2239,.T.);+#2239=EDGE_CURVE('',#779,#2240,#2242,.T.);+#2240=VERTEX_POINT('',#2241);+#2241=CARTESIAN_POINT('',(1.799240387651,1.125,0.393682408883));+#2242=CIRCLE('',#2243,5.E-02);+#2243=AXIS2_PLACEMENT_3D('',#2244,#60,#2106);+#2244=CARTESIAN_POINT('',(1.75,1.125,0.385));+#2245=ORIENTED_EDGE('',*,*,#2246,.T.);+#2246=EDGE_CURVE('',#2240,#2247,#2249,.T.);+#2247=VERTEX_POINT('',#2248);+#2248=CARTESIAN_POINT('',(1.830824898817,1.125,0.190060919137));+#2249=LINE('',#2241,#2112);+#2250=ORIENTED_EDGE('',*,*,#2251,.T.);+#2251=EDGE_CURVE('',#2247,#2252,#2254,.T.);+#2252=VERTEX_POINT('',#2253);+#2253=CARTESIAN_POINT('',(2.05733068201,1.125,8.326672684689E-17));+#2254=CIRCLE('',#2255,0.23);+#2255=AXIS2_PLACEMENT_3D('',#2256,#88,#2121);+#2256=CARTESIAN_POINT('',(2.05733068201,1.125,0.23));+#2257=ORIENTED_EDGE('',*,*,#2258,.T.);+#2258=EDGE_CURVE('',#2252,#2259,#2261,.T.);+#2259=VERTEX_POINT('',#2260);+#2260=CARTESIAN_POINT('',(2.45,1.125,8.326672684689E-17));+#2261=LINE('',#2253,#27);+#2262=ORIENTED_EDGE('',*,*,#2263,.T.);+#2263=EDGE_CURVE('',#2259,#2264,#2266,.T.);+#2264=VERTEX_POINT('',#2265);+#2265=CARTESIAN_POINT('',(2.45,1.125,0.18));+#2266=LINE('',#2260,#336);+#2267=ORIENTED_EDGE('',*,*,#2268,.T.);+#2268=EDGE_CURVE('',#2264,#2269,#2271,.T.);+#2269=VERTEX_POINT('',#2270);+#2270=CARTESIAN_POINT('',(2.05733068201,1.125,0.18));+#2271=LINE('',#2265,#73);+#2272=ORIENTED_EDGE('',*,*,#2273,.T.);+#2273=EDGE_CURVE('',#2269,#2274,#2276,.T.);+#2274=VERTEX_POINT('',#2275);+#2275=CARTESIAN_POINT('',(2.008090294359,1.125,0.221317591117));+#2276=CIRCLE('',#2277,5.E-02);+#2277=AXIS2_PLACEMENT_3D('',#2256,#60,#1039);+#2278=ORIENTED_EDGE('',*,*,#2279,.T.);+#2279=EDGE_CURVE('',#2274,#2280,#2282,.T.);+#2280=VERTEX_POINT('',#2281);+#2281=CARTESIAN_POINT('',(1.976505783193,1.125,0.424939080863));+#2282=LINE('',#2275,#2148);+#2283=ORIENTED_EDGE('',*,*,#2284,.T.);+#2284=EDGE_CURVE('',#2280,#2285,#2286,.T.);+#2285=VERTEX_POINT('',#2231);+#2286=CIRCLE('',#2287,0.23);+#2287=AXIS2_PLACEMENT_3D('',#2244,#88,#2154);+#2288=ORIENTED_EDGE('',*,*,#2289,.T.);+#2289=EDGE_CURVE('',#2285,#768,#2230,.T.);+#2290=PLANE('',#2291);+#2291=AXIS2_PLACEMENT_3D('',#2292,#88,#13);+#2292=CARTESIAN_POINT('',(1.90066971159,1.125,0.308518045934));+#2293=ADVANCED_FACE('',(#2294),#2308,.F.);+#2294=FACE_BOUND('',#2295,.F.);+#2295=EDGE_LOOP('',(#2296,#2297,#2304,#2307));+#2296=ORIENTED_EDGE('',*,*,#791,.T.);+#2297=ORIENTED_EDGE('',*,*,#2298,.T.);+#2298=EDGE_CURVE('',#786,#2299,#2301,.T.);+#2299=VERTEX_POINT('',#2300);+#2300=CARTESIAN_POINT('',(1.799240387651,0.825,0.393682408883));+#2301=CIRCLE('',#2302,5.E-02);+#2302=AXIS2_PLACEMENT_3D('',#2303,#60,#2106);+#2303=CARTESIAN_POINT('',(1.75,0.825,0.385));+#2304=ORIENTED_EDGE('',*,*,#2305,.F.);+#2305=EDGE_CURVE('',#2240,#2299,#2306,.T.);+#2306=LINE('',#2241,#87);+#2307=ORIENTED_EDGE('',*,*,#2239,.F.);+#2308=CYLINDRICAL_SURFACE('',#2243,5.E-02);+#2309=ADVANCED_FACE('',(#2310),#2359,.T.);+#2310=FACE_BOUND('',#2311,.T.);+#2311=EDGE_LOOP('',(#798,#784,#2297,#2312,#2317,#2324,#2329,#2334,#2339,#2345,#2350,#2356));+#2312=ORIENTED_EDGE('',*,*,#2313,.T.);+#2313=EDGE_CURVE('',#2299,#2314,#2316,.T.);+#2314=VERTEX_POINT('',#2315);+#2315=CARTESIAN_POINT('',(1.830824898817,0.825,0.190060919137));+#2316=LINE('',#2300,#2112);+#2317=ORIENTED_EDGE('',*,*,#2318,.T.);+#2318=EDGE_CURVE('',#2314,#2319,#2321,.T.);+#2319=VERTEX_POINT('',#2320);+#2320=CARTESIAN_POINT('',(2.05733068201,0.825,8.326672684689E-17));+#2321=CIRCLE('',#2322,0.23);+#2322=AXIS2_PLACEMENT_3D('',#2323,#88,#2121);+#2323=CARTESIAN_POINT('',(2.05733068201,0.825,0.23));+#2324=ORIENTED_EDGE('',*,*,#2325,.T.);+#2325=EDGE_CURVE('',#2319,#2326,#2328,.T.);+#2326=VERTEX_POINT('',#2327);+#2327=CARTESIAN_POINT('',(2.45,0.825,8.326672684689E-17));+#2328=LINE('',#2320,#27);+#2329=ORIENTED_EDGE('',*,*,#2330,.T.);+#2330=EDGE_CURVE('',#2326,#2331,#2333,.T.);+#2331=VERTEX_POINT('',#2332);+#2332=CARTESIAN_POINT('',(2.45,0.825,0.18));+#2333=LINE('',#2327,#336);+#2334=ORIENTED_EDGE('',*,*,#2335,.T.);+#2335=EDGE_CURVE('',#2331,#2336,#2338,.T.);+#2336=VERTEX_POINT('',#2337);+#2337=CARTESIAN_POINT('',(2.05733068201,0.825,0.18));+#2338=LINE('',#2332,#73);+#2339=ORIENTED_EDGE('',*,*,#2340,.T.);+#2340=EDGE_CURVE('',#2336,#2341,#2343,.T.);+#2341=VERTEX_POINT('',#2342);+#2342=CARTESIAN_POINT('',(2.008090294359,0.825,0.221317591117));+#2343=CIRCLE('',#2344,5.E-02);+#2344=AXIS2_PLACEMENT_3D('',#2323,#60,#1039);+#2345=ORIENTED_EDGE('',*,*,#2346,.T.);+#2346=EDGE_CURVE('',#2341,#2347,#2349,.T.);+#2347=VERTEX_POINT('',#2348);+#2348=CARTESIAN_POINT('',(1.976505783193,0.825,0.424939080863));+#2349=LINE('',#2342,#2148);+#2350=ORIENTED_EDGE('',*,*,#2351,.T.);+#2351=EDGE_CURVE('',#2347,#2352,#2354,.T.);+#2352=VERTEX_POINT('',#2353);+#2353=CARTESIAN_POINT('',(1.75,0.825,0.615));+#2354=CIRCLE('',#2355,0.23);+#2355=AXIS2_PLACEMENT_3D('',#2303,#88,#2154);+#2356=ORIENTED_EDGE('',*,*,#2357,.T.);+#2357=EDGE_CURVE('',#2352,#800,#2358,.T.);+#2358=LINE('',#2353,#73);+#2359=PLANE('',#2360);+#2360=AXIS2_PLACEMENT_3D('',#2361,#88,#13);+#2361=CARTESIAN_POINT('',(1.90066971159,0.825,0.308518045934));+#2362=ADVANCED_FACE('',(#2363),#459,.F.);+#2363=FACE_BOUND('',#2364,.F.);+#2364=EDGE_LOOP('',(#2365,#2367,#2368,#2372));+#2365=ORIENTED_EDGE('',*,*,#2366,.F.);+#2366=EDGE_CURVE('',#800,#1158,#2358,.T.);+#2367=ORIENTED_EDGE('',*,*,#812,.T.);+#2368=ORIENTED_EDGE('',*,*,#2369,.T.);+#2369=EDGE_CURVE('',#807,#1162,#2370,.T.);+#2370=LINE('',#2371,#73);+#2371=CARTESIAN_POINT('',(1.75,0.475,0.615));+#2372=ORIENTED_EDGE('',*,*,#1161,.F.);+#2373=ADVANCED_FACE('',(#2374),#2430,.F.);+#2374=FACE_BOUND('',#2375,.F.);+#2375=EDGE_LOOP('',(#2376,#2377,#2378,#2385,#2390,#2397,#2402,#2407,#2412,#2418,#2423,#2428));+#2376=ORIENTED_EDGE('',*,*,#806,.F.);+#2377=ORIENTED_EDGE('',*,*,#817,.T.);+#2378=ORIENTED_EDGE('',*,*,#2379,.T.);+#2379=EDGE_CURVE('',#818,#2380,#2382,.T.);+#2380=VERTEX_POINT('',#2381);+#2381=CARTESIAN_POINT('',(1.799240387651,0.475,0.393682408883));+#2382=CIRCLE('',#2383,5.E-02);+#2383=AXIS2_PLACEMENT_3D('',#2384,#60,#2106);+#2384=CARTESIAN_POINT('',(1.75,0.475,0.385));+#2385=ORIENTED_EDGE('',*,*,#2386,.T.);+#2386=EDGE_CURVE('',#2380,#2387,#2389,.T.);+#2387=VERTEX_POINT('',#2388);+#2388=CARTESIAN_POINT('',(1.830824898817,0.475,0.190060919137));+#2389=LINE('',#2381,#2112);+#2390=ORIENTED_EDGE('',*,*,#2391,.T.);+#2391=EDGE_CURVE('',#2387,#2392,#2394,.T.);+#2392=VERTEX_POINT('',#2393);+#2393=CARTESIAN_POINT('',(2.05733068201,0.475,8.326672684689E-17));+#2394=CIRCLE('',#2395,0.23);+#2395=AXIS2_PLACEMENT_3D('',#2396,#88,#2121);+#2396=CARTESIAN_POINT('',(2.05733068201,0.475,0.23));+#2397=ORIENTED_EDGE('',*,*,#2398,.T.);+#2398=EDGE_CURVE('',#2392,#2399,#2401,.T.);+#2399=VERTEX_POINT('',#2400);+#2400=CARTESIAN_POINT('',(2.45,0.475,8.326672684689E-17));+#2401=LINE('',#2393,#27);+#2402=ORIENTED_EDGE('',*,*,#2403,.T.);+#2403=EDGE_CURVE('',#2399,#2404,#2406,.T.);+#2404=VERTEX_POINT('',#2405);+#2405=CARTESIAN_POINT('',(2.45,0.475,0.18));+#2406=LINE('',#2400,#336);+#2407=ORIENTED_EDGE('',*,*,#2408,.T.);+#2408=EDGE_CURVE('',#2404,#2409,#2411,.T.);+#2409=VERTEX_POINT('',#2410);+#2410=CARTESIAN_POINT('',(2.05733068201,0.475,0.18));+#2411=LINE('',#2405,#73);+#2412=ORIENTED_EDGE('',*,*,#2413,.T.);+#2413=EDGE_CURVE('',#2409,#2414,#2416,.T.);+#2414=VERTEX_POINT('',#2415);+#2415=CARTESIAN_POINT('',(2.008090294359,0.475,0.221317591117));+#2416=CIRCLE('',#2417,5.E-02);+#2417=AXIS2_PLACEMENT_3D('',#2396,#60,#1039);+#2418=ORIENTED_EDGE('',*,*,#2419,.T.);+#2419=EDGE_CURVE('',#2414,#2420,#2422,.T.);+#2420=VERTEX_POINT('',#2421);+#2421=CARTESIAN_POINT('',(1.976505783193,0.475,0.424939080863));+#2422=LINE('',#2415,#2148);+#2423=ORIENTED_EDGE('',*,*,#2424,.T.);+#2424=EDGE_CURVE('',#2420,#2425,#2426,.T.);+#2425=VERTEX_POINT('',#2371);+#2426=CIRCLE('',#2427,0.23);+#2427=AXIS2_PLACEMENT_3D('',#2384,#88,#2154);+#2428=ORIENTED_EDGE('',*,*,#2429,.T.);+#2429=EDGE_CURVE('',#2425,#807,#2370,.T.);+#2430=PLANE('',#2431);+#2431=AXIS2_PLACEMENT_3D('',#2432,#88,#13);+#2432=CARTESIAN_POINT('',(1.90066971159,0.475,0.308518045934));+#2433=ADVANCED_FACE('',(#2434),#2448,.F.);+#2434=FACE_BOUND('',#2435,.F.);+#2435=EDGE_LOOP('',(#2436,#2437,#2444,#2447));+#2436=ORIENTED_EDGE('',*,*,#830,.T.);+#2437=ORIENTED_EDGE('',*,*,#2438,.T.);+#2438=EDGE_CURVE('',#825,#2439,#2441,.T.);+#2439=VERTEX_POINT('',#2440);+#2440=CARTESIAN_POINT('',(1.799240387651,0.175,0.393682408883));+#2441=CIRCLE('',#2442,5.E-02);+#2442=AXIS2_PLACEMENT_3D('',#2443,#60,#2106);+#2443=CARTESIAN_POINT('',(1.75,0.175,0.385));+#2444=ORIENTED_EDGE('',*,*,#2445,.F.);+#2445=EDGE_CURVE('',#2380,#2439,#2446,.T.);+#2446=LINE('',#2381,#87);+#2447=ORIENTED_EDGE('',*,*,#2379,.F.);+#2448=CYLINDRICAL_SURFACE('',#2383,5.E-02);+#2449=ADVANCED_FACE('',(#2450),#2499,.T.);+#2450=FACE_BOUND('',#2451,.T.);+#2451=EDGE_LOOP('',(#837,#823,#2437,#2452,#2457,#2464,#2469,#2474,#2479,#2485,#2490,#2496));+#2452=ORIENTED_EDGE('',*,*,#2453,.T.);+#2453=EDGE_CURVE('',#2439,#2454,#2456,.T.);+#2454=VERTEX_POINT('',#2455);+#2455=CARTESIAN_POINT('',(1.830824898817,0.175,0.190060919137));+#2456=LINE('',#2440,#2112);+#2457=ORIENTED_EDGE('',*,*,#2458,.T.);+#2458=EDGE_CURVE('',#2454,#2459,#2461,.T.);+#2459=VERTEX_POINT('',#2460);+#2460=CARTESIAN_POINT('',(2.05733068201,0.175,8.326672684689E-17));+#2461=CIRCLE('',#2462,0.23);+#2462=AXIS2_PLACEMENT_3D('',#2463,#88,#2121);+#2463=CARTESIAN_POINT('',(2.05733068201,0.175,0.23));+#2464=ORIENTED_EDGE('',*,*,#2465,.T.);+#2465=EDGE_CURVE('',#2459,#2466,#2468,.T.);+#2466=VERTEX_POINT('',#2467);+#2467=CARTESIAN_POINT('',(2.45,0.175,8.326672684689E-17));+#2468=LINE('',#2460,#27);+#2469=ORIENTED_EDGE('',*,*,#2470,.T.);+#2470=EDGE_CURVE('',#2466,#2471,#2473,.T.);+#2471=VERTEX_POINT('',#2472);+#2472=CARTESIAN_POINT('',(2.45,0.175,0.18));+#2473=LINE('',#2467,#336);+#2474=ORIENTED_EDGE('',*,*,#2475,.T.);+#2475=EDGE_CURVE('',#2471,#2476,#2478,.T.);+#2476=VERTEX_POINT('',#2477);+#2477=CARTESIAN_POINT('',(2.05733068201,0.175,0.18));+#2478=LINE('',#2472,#73);+#2479=ORIENTED_EDGE('',*,*,#2480,.T.);+#2480=EDGE_CURVE('',#2476,#2481,#2483,.T.);+#2481=VERTEX_POINT('',#2482);+#2482=CARTESIAN_POINT('',(2.008090294359,0.175,0.221317591117));+#2483=CIRCLE('',#2484,5.E-02);+#2484=AXIS2_PLACEMENT_3D('',#2463,#60,#1039);+#2485=ORIENTED_EDGE('',*,*,#2486,.T.);+#2486=EDGE_CURVE('',#2481,#2487,#2489,.T.);+#2487=VERTEX_POINT('',#2488);+#2488=CARTESIAN_POINT('',(1.976505783193,0.175,0.424939080863));+#2489=LINE('',#2482,#2148);+#2490=ORIENTED_EDGE('',*,*,#2491,.T.);+#2491=EDGE_CURVE('',#2487,#2492,#2494,.T.);+#2492=VERTEX_POINT('',#2493);+#2493=CARTESIAN_POINT('',(1.75,0.175,0.615));+#2494=CIRCLE('',#2495,0.23);+#2495=AXIS2_PLACEMENT_3D('',#2443,#88,#2154);+#2496=ORIENTED_EDGE('',*,*,#2497,.T.);+#2497=EDGE_CURVE('',#2492,#839,#2498,.T.);+#2498=LINE('',#2493,#73);+#2499=PLANE('',#2500);+#2500=AXIS2_PLACEMENT_3D('',#2501,#88,#13);+#2501=CARTESIAN_POINT('',(1.90066971159,0.175,0.308518045934));+#2502=ADVANCED_FACE('',(#2503),#459,.F.);+#2503=FACE_BOUND('',#2504,.F.);+#2504=EDGE_LOOP('',(#2505,#2507,#2508,#2512));+#2505=ORIENTED_EDGE('',*,*,#2506,.F.);+#2506=EDGE_CURVE('',#839,#1166,#2498,.T.);+#2507=ORIENTED_EDGE('',*,*,#851,.T.);+#2508=ORIENTED_EDGE('',*,*,#2509,.T.);+#2509=EDGE_CURVE('',#846,#1170,#2510,.T.);+#2510=LINE('',#2511,#73);+#2511=CARTESIAN_POINT('',(1.75,-0.175,0.615));+#2512=ORIENTED_EDGE('',*,*,#1169,.F.);+#2513=ADVANCED_FACE('',(#2514),#2570,.F.);+#2514=FACE_BOUND('',#2515,.F.);+#2515=EDGE_LOOP('',(#2516,#2517,#2518,#2525,#2530,#2537,#2542,#2547,#2552,#2558,#2563,#2568));+#2516=ORIENTED_EDGE('',*,*,#845,.F.);+#2517=ORIENTED_EDGE('',*,*,#856,.T.);+#2518=ORIENTED_EDGE('',*,*,#2519,.T.);+#2519=EDGE_CURVE('',#857,#2520,#2522,.T.);+#2520=VERTEX_POINT('',#2521);+#2521=CARTESIAN_POINT('',(1.799240387651,-0.175,0.393682408883));+#2522=CIRCLE('',#2523,5.E-02);+#2523=AXIS2_PLACEMENT_3D('',#2524,#60,#2106);+#2524=CARTESIAN_POINT('',(1.75,-0.175,0.385));+#2525=ORIENTED_EDGE('',*,*,#2526,.T.);+#2526=EDGE_CURVE('',#2520,#2527,#2529,.T.);+#2527=VERTEX_POINT('',#2528);+#2528=CARTESIAN_POINT('',(1.830824898817,-0.175,0.190060919137));+#2529=LINE('',#2521,#2112);+#2530=ORIENTED_EDGE('',*,*,#2531,.T.);+#2531=EDGE_CURVE('',#2527,#2532,#2534,.T.);+#2532=VERTEX_POINT('',#2533);+#2533=CARTESIAN_POINT('',(2.05733068201,-0.175,8.326672684689E-17));+#2534=CIRCLE('',#2535,0.23);+#2535=AXIS2_PLACEMENT_3D('',#2536,#88,#2121);+#2536=CARTESIAN_POINT('',(2.05733068201,-0.175,0.23));+#2537=ORIENTED_EDGE('',*,*,#2538,.T.);+#2538=EDGE_CURVE('',#2532,#2539,#2541,.T.);+#2539=VERTEX_POINT('',#2540);+#2540=CARTESIAN_POINT('',(2.45,-0.175,8.326672684689E-17));+#2541=LINE('',#2533,#27);+#2542=ORIENTED_EDGE('',*,*,#2543,.T.);+#2543=EDGE_CURVE('',#2539,#2544,#2546,.T.);+#2544=VERTEX_POINT('',#2545);+#2545=CARTESIAN_POINT('',(2.45,-0.175,0.18));+#2546=LINE('',#2540,#336);+#2547=ORIENTED_EDGE('',*,*,#2548,.T.);+#2548=EDGE_CURVE('',#2544,#2549,#2551,.T.);+#2549=VERTEX_POINT('',#2550);+#2550=CARTESIAN_POINT('',(2.05733068201,-0.175,0.18));+#2551=LINE('',#2545,#73);+#2552=ORIENTED_EDGE('',*,*,#2553,.T.);+#2553=EDGE_CURVE('',#2549,#2554,#2556,.T.);+#2554=VERTEX_POINT('',#2555);+#2555=CARTESIAN_POINT('',(2.008090294359,-0.175,0.221317591117));+#2556=CIRCLE('',#2557,5.E-02);+#2557=AXIS2_PLACEMENT_3D('',#2536,#60,#1039);+#2558=ORIENTED_EDGE('',*,*,#2559,.T.);+#2559=EDGE_CURVE('',#2554,#2560,#2562,.T.);+#2560=VERTEX_POINT('',#2561);+#2561=CARTESIAN_POINT('',(1.976505783193,-0.175,0.424939080863));+#2562=LINE('',#2555,#2148);+#2563=ORIENTED_EDGE('',*,*,#2564,.T.);+#2564=EDGE_CURVE('',#2560,#2565,#2566,.T.);+#2565=VERTEX_POINT('',#2511);+#2566=CIRCLE('',#2567,0.23);+#2567=AXIS2_PLACEMENT_3D('',#2524,#88,#2154);+#2568=ORIENTED_EDGE('',*,*,#2569,.T.);+#2569=EDGE_CURVE('',#2565,#846,#2510,.T.);+#2570=PLANE('',#2571);+#2571=AXIS2_PLACEMENT_3D('',#2572,#88,#13);+#2572=CARTESIAN_POINT('',(1.90066971159,-0.175,0.308518045934));+#2573=ADVANCED_FACE('',(#2574),#2588,.F.);+#2574=FACE_BOUND('',#2575,.F.);+#2575=EDGE_LOOP('',(#2576,#2577,#2584,#2587));+#2576=ORIENTED_EDGE('',*,*,#869,.T.);+#2577=ORIENTED_EDGE('',*,*,#2578,.T.);+#2578=EDGE_CURVE('',#864,#2579,#2581,.T.);+#2579=VERTEX_POINT('',#2580);+#2580=CARTESIAN_POINT('',(1.799240387651,-0.475,0.393682408883));+#2581=CIRCLE('',#2582,5.E-02);+#2582=AXIS2_PLACEMENT_3D('',#2583,#60,#2106);+#2583=CARTESIAN_POINT('',(1.75,-0.475,0.385));+#2584=ORIENTED_EDGE('',*,*,#2585,.F.);+#2585=EDGE_CURVE('',#2520,#2579,#2586,.T.);+#2586=LINE('',#2521,#87);+#2587=ORIENTED_EDGE('',*,*,#2519,.F.);+#2588=CYLINDRICAL_SURFACE('',#2523,5.E-02);+#2589=ADVANCED_FACE('',(#2590),#2639,.T.);+#2590=FACE_BOUND('',#2591,.T.);+#2591=EDGE_LOOP('',(#876,#862,#2577,#2592,#2597,#2604,#2609,#2614,#2619,#2625,#2630,#2636));+#2592=ORIENTED_EDGE('',*,*,#2593,.T.);+#2593=EDGE_CURVE('',#2579,#2594,#2596,.T.);+#2594=VERTEX_POINT('',#2595);+#2595=CARTESIAN_POINT('',(1.830824898817,-0.475,0.190060919137));+#2596=LINE('',#2580,#2112);+#2597=ORIENTED_EDGE('',*,*,#2598,.T.);+#2598=EDGE_CURVE('',#2594,#2599,#2601,.T.);+#2599=VERTEX_POINT('',#2600);+#2600=CARTESIAN_POINT('',(2.05733068201,-0.475,8.326672684689E-17));+#2601=CIRCLE('',#2602,0.23);+#2602=AXIS2_PLACEMENT_3D('',#2603,#88,#2121);+#2603=CARTESIAN_POINT('',(2.05733068201,-0.475,0.23));+#2604=ORIENTED_EDGE('',*,*,#2605,.T.);+#2605=EDGE_CURVE('',#2599,#2606,#2608,.T.);+#2606=VERTEX_POINT('',#2607);+#2607=CARTESIAN_POINT('',(2.45,-0.475,8.326672684689E-17));+#2608=LINE('',#2600,#27);+#2609=ORIENTED_EDGE('',*,*,#2610,.T.);+#2610=EDGE_CURVE('',#2606,#2611,#2613,.T.);+#2611=VERTEX_POINT('',#2612);+#2612=CARTESIAN_POINT('',(2.45,-0.475,0.18));+#2613=LINE('',#2607,#336);+#2614=ORIENTED_EDGE('',*,*,#2615,.T.);+#2615=EDGE_CURVE('',#2611,#2616,#2618,.T.);+#2616=VERTEX_POINT('',#2617);+#2617=CARTESIAN_POINT('',(2.05733068201,-0.475,0.18));+#2618=LINE('',#2612,#73);+#2619=ORIENTED_EDGE('',*,*,#2620,.T.);+#2620=EDGE_CURVE('',#2616,#2621,#2623,.T.);+#2621=VERTEX_POINT('',#2622);+#2622=CARTESIAN_POINT('',(2.008090294359,-0.475,0.221317591117));+#2623=CIRCLE('',#2624,5.E-02);+#2624=AXIS2_PLACEMENT_3D('',#2603,#60,#1039);+#2625=ORIENTED_EDGE('',*,*,#2626,.T.);+#2626=EDGE_CURVE('',#2621,#2627,#2629,.T.);+#2627=VERTEX_POINT('',#2628);+#2628=CARTESIAN_POINT('',(1.976505783193,-0.475,0.424939080863));+#2629=LINE('',#2622,#2148);+#2630=ORIENTED_EDGE('',*,*,#2631,.T.);+#2631=EDGE_CURVE('',#2627,#2632,#2634,.T.);+#2632=VERTEX_POINT('',#2633);+#2633=CARTESIAN_POINT('',(1.75,-0.475,0.615));+#2634=CIRCLE('',#2635,0.23);+#2635=AXIS2_PLACEMENT_3D('',#2583,#88,#2154);+#2636=ORIENTED_EDGE('',*,*,#2637,.T.);+#2637=EDGE_CURVE('',#2632,#878,#2638,.T.);+#2638=LINE('',#2633,#73);+#2639=PLANE('',#2640);+#2640=AXIS2_PLACEMENT_3D('',#2641,#88,#13);+#2641=CARTESIAN_POINT('',(1.90066971159,-0.475,0.308518045934));+#2642=ADVANCED_FACE('',(#2643),#459,.F.);+#2643=FACE_BOUND('',#2644,.F.);+#2644=EDGE_LOOP('',(#2645,#2647,#2648,#2652));+#2645=ORIENTED_EDGE('',*,*,#2646,.F.);+#2646=EDGE_CURVE('',#878,#1174,#2638,.T.);+#2647=ORIENTED_EDGE('',*,*,#890,.T.);+#2648=ORIENTED_EDGE('',*,*,#2649,.T.);+#2649=EDGE_CURVE('',#885,#1178,#2650,.T.);+#2650=LINE('',#2651,#73);+#2651=CARTESIAN_POINT('',(1.75,-0.825,0.615));+#2652=ORIENTED_EDGE('',*,*,#1177,.F.);+#2653=ADVANCED_FACE('',(#2654),#2710,.F.);+#2654=FACE_BOUND('',#2655,.F.);+#2655=EDGE_LOOP('',(#2656,#2657,#2658,#2665,#2670,#2677,#2682,#2687,#2692,#2698,#2703,#2708));+#2656=ORIENTED_EDGE('',*,*,#884,.F.);+#2657=ORIENTED_EDGE('',*,*,#895,.T.);+#2658=ORIENTED_EDGE('',*,*,#2659,.T.);+#2659=EDGE_CURVE('',#896,#2660,#2662,.T.);+#2660=VERTEX_POINT('',#2661);+#2661=CARTESIAN_POINT('',(1.799240387651,-0.825,0.393682408883));+#2662=CIRCLE('',#2663,5.E-02);+#2663=AXIS2_PLACEMENT_3D('',#2664,#60,#2106);+#2664=CARTESIAN_POINT('',(1.75,-0.825,0.385));+#2665=ORIENTED_EDGE('',*,*,#2666,.T.);+#2666=EDGE_CURVE('',#2660,#2667,#2669,.T.);+#2667=VERTEX_POINT('',#2668);+#2668=CARTESIAN_POINT('',(1.830824898817,-0.825,0.190060919137));+#2669=LINE('',#2661,#2112);+#2670=ORIENTED_EDGE('',*,*,#2671,.T.);+#2671=EDGE_CURVE('',#2667,#2672,#2674,.T.);+#2672=VERTEX_POINT('',#2673);+#2673=CARTESIAN_POINT('',(2.05733068201,-0.825,8.326672684689E-17));+#2674=CIRCLE('',#2675,0.23);+#2675=AXIS2_PLACEMENT_3D('',#2676,#88,#2121);+#2676=CARTESIAN_POINT('',(2.05733068201,-0.825,0.23));+#2677=ORIENTED_EDGE('',*,*,#2678,.T.);+#2678=EDGE_CURVE('',#2672,#2679,#2681,.T.);+#2679=VERTEX_POINT('',#2680);+#2680=CARTESIAN_POINT('',(2.45,-0.825,8.326672684689E-17));+#2681=LINE('',#2673,#27);+#2682=ORIENTED_EDGE('',*,*,#2683,.T.);+#2683=EDGE_CURVE('',#2679,#2684,#2686,.T.);+#2684=VERTEX_POINT('',#2685);+#2685=CARTESIAN_POINT('',(2.45,-0.825,0.18));+#2686=LINE('',#2680,#336);+#2687=ORIENTED_EDGE('',*,*,#2688,.T.);+#2688=EDGE_CURVE('',#2684,#2689,#2691,.T.);+#2689=VERTEX_POINT('',#2690);+#2690=CARTESIAN_POINT('',(2.05733068201,-0.825,0.18));+#2691=LINE('',#2685,#73);+#2692=ORIENTED_EDGE('',*,*,#2693,.T.);+#2693=EDGE_CURVE('',#2689,#2694,#2696,.T.);+#2694=VERTEX_POINT('',#2695);+#2695=CARTESIAN_POINT('',(2.008090294359,-0.825,0.221317591117));+#2696=CIRCLE('',#2697,5.E-02);+#2697=AXIS2_PLACEMENT_3D('',#2676,#60,#1039);+#2698=ORIENTED_EDGE('',*,*,#2699,.T.);+#2699=EDGE_CURVE('',#2694,#2700,#2702,.T.);+#2700=VERTEX_POINT('',#2701);+#2701=CARTESIAN_POINT('',(1.976505783193,-0.825,0.424939080863));+#2702=LINE('',#2695,#2148);+#2703=ORIENTED_EDGE('',*,*,#2704,.T.);+#2704=EDGE_CURVE('',#2700,#2705,#2706,.T.);+#2705=VERTEX_POINT('',#2651);+#2706=CIRCLE('',#2707,0.23);+#2707=AXIS2_PLACEMENT_3D('',#2664,#88,#2154);+#2708=ORIENTED_EDGE('',*,*,#2709,.T.);+#2709=EDGE_CURVE('',#2705,#885,#2650,.T.);+#2710=PLANE('',#2711);+#2711=AXIS2_PLACEMENT_3D('',#2712,#88,#13);+#2712=CARTESIAN_POINT('',(1.90066971159,-0.825,0.308518045934));+#2713=ADVANCED_FACE('',(#2714),#2728,.F.);+#2714=FACE_BOUND('',#2715,.F.);+#2715=EDGE_LOOP('',(#2716,#2717,#2724,#2727));+#2716=ORIENTED_EDGE('',*,*,#908,.T.);+#2717=ORIENTED_EDGE('',*,*,#2718,.T.);+#2718=EDGE_CURVE('',#903,#2719,#2721,.T.);+#2719=VERTEX_POINT('',#2720);+#2720=CARTESIAN_POINT('',(1.799240387651,-1.125,0.393682408883));+#2721=CIRCLE('',#2722,5.E-02);+#2722=AXIS2_PLACEMENT_3D('',#2723,#60,#2106);+#2723=CARTESIAN_POINT('',(1.75,-1.125,0.385));+#2724=ORIENTED_EDGE('',*,*,#2725,.F.);+#2725=EDGE_CURVE('',#2660,#2719,#2726,.T.);+#2726=LINE('',#2661,#87);+#2727=ORIENTED_EDGE('',*,*,#2659,.F.);+#2728=CYLINDRICAL_SURFACE('',#2663,5.E-02);+#2729=ADVANCED_FACE('',(#2730),#2779,.T.);+#2730=FACE_BOUND('',#2731,.T.);+#2731=EDGE_LOOP('',(#915,#901,#2717,#2732,#2737,#2744,#2749,#2754,#2759,#2765,#2770,#2776));+#2732=ORIENTED_EDGE('',*,*,#2733,.T.);+#2733=EDGE_CURVE('',#2719,#2734,#2736,.T.);+#2734=VERTEX_POINT('',#2735);+#2735=CARTESIAN_POINT('',(1.830824898817,-1.125,0.190060919137));+#2736=LINE('',#2720,#2112);+#2737=ORIENTED_EDGE('',*,*,#2738,.T.);+#2738=EDGE_CURVE('',#2734,#2739,#2741,.T.);+#2739=VERTEX_POINT('',#2740);+#2740=CARTESIAN_POINT('',(2.05733068201,-1.125,8.326672684689E-17));+#2741=CIRCLE('',#2742,0.23);+#2742=AXIS2_PLACEMENT_3D('',#2743,#88,#2121);+#2743=CARTESIAN_POINT('',(2.05733068201,-1.125,0.23));+#2744=ORIENTED_EDGE('',*,*,#2745,.T.);+#2745=EDGE_CURVE('',#2739,#2746,#2748,.T.);+#2746=VERTEX_POINT('',#2747);+#2747=CARTESIAN_POINT('',(2.45,-1.125,8.326672684689E-17));+#2748=LINE('',#2740,#27);+#2749=ORIENTED_EDGE('',*,*,#2750,.T.);+#2750=EDGE_CURVE('',#2746,#2751,#2753,.T.);+#2751=VERTEX_POINT('',#2752);+#2752=CARTESIAN_POINT('',(2.45,-1.125,0.18));+#2753=LINE('',#2747,#336);+#2754=ORIENTED_EDGE('',*,*,#2755,.T.);+#2755=EDGE_CURVE('',#2751,#2756,#2758,.T.);+#2756=VERTEX_POINT('',#2757);+#2757=CARTESIAN_POINT('',(2.05733068201,-1.125,0.18));+#2758=LINE('',#2752,#73);+#2759=ORIENTED_EDGE('',*,*,#2760,.T.);+#2760=EDGE_CURVE('',#2756,#2761,#2763,.T.);+#2761=VERTEX_POINT('',#2762);+#2762=CARTESIAN_POINT('',(2.008090294359,-1.125,0.221317591117));+#2763=CIRCLE('',#2764,5.E-02);+#2764=AXIS2_PLACEMENT_3D('',#2743,#60,#1039);+#2765=ORIENTED_EDGE('',*,*,#2766,.T.);+#2766=EDGE_CURVE('',#2761,#2767,#2769,.T.);+#2767=VERTEX_POINT('',#2768);+#2768=CARTESIAN_POINT('',(1.976505783193,-1.125,0.424939080863));+#2769=LINE('',#2762,#2148);+#2770=ORIENTED_EDGE('',*,*,#2771,.T.);+#2771=EDGE_CURVE('',#2767,#2772,#2774,.T.);+#2772=VERTEX_POINT('',#2773);+#2773=CARTESIAN_POINT('',(1.75,-1.125,0.615));+#2774=CIRCLE('',#2775,0.23);+#2775=AXIS2_PLACEMENT_3D('',#2723,#88,#2154);+#2776=ORIENTED_EDGE('',*,*,#2777,.T.);+#2777=EDGE_CURVE('',#2772,#917,#2778,.T.);+#2778=LINE('',#2773,#73);+#2779=PLANE('',#2780);+#2780=AXIS2_PLACEMENT_3D('',#2781,#88,#13);+#2781=CARTESIAN_POINT('',(1.90066971159,-1.125,0.308518045934));+#2782=ADVANCED_FACE('',(#2783),#459,.F.);+#2783=FACE_BOUND('',#2784,.F.);+#2784=EDGE_LOOP('',(#2785,#2787,#2788,#2792));+#2785=ORIENTED_EDGE('',*,*,#2786,.F.);+#2786=EDGE_CURVE('',#917,#1182,#2778,.T.);+#2787=ORIENTED_EDGE('',*,*,#929,.T.);+#2788=ORIENTED_EDGE('',*,*,#2789,.T.);+#2789=EDGE_CURVE('',#924,#1186,#2790,.T.);+#2790=LINE('',#2791,#73);+#2791=CARTESIAN_POINT('',(1.75,-1.475,0.615));+#2792=ORIENTED_EDGE('',*,*,#1185,.F.);+#2793=ADVANCED_FACE('',(#2794),#2850,.F.);+#2794=FACE_BOUND('',#2795,.F.);+#2795=EDGE_LOOP('',(#2796,#2797,#2798,#2805,#2810,#2817,#2822,#2827,#2832,#2838,#2843,#2848));+#2796=ORIENTED_EDGE('',*,*,#923,.F.);+#2797=ORIENTED_EDGE('',*,*,#934,.T.);+#2798=ORIENTED_EDGE('',*,*,#2799,.T.);+#2799=EDGE_CURVE('',#935,#2800,#2802,.T.);+#2800=VERTEX_POINT('',#2801);+#2801=CARTESIAN_POINT('',(1.799240387651,-1.475,0.393682408883));+#2802=CIRCLE('',#2803,5.E-02);+#2803=AXIS2_PLACEMENT_3D('',#2804,#60,#2106);+#2804=CARTESIAN_POINT('',(1.75,-1.475,0.385));+#2805=ORIENTED_EDGE('',*,*,#2806,.T.);+#2806=EDGE_CURVE('',#2800,#2807,#2809,.T.);+#2807=VERTEX_POINT('',#2808);+#2808=CARTESIAN_POINT('',(1.830824898817,-1.475,0.190060919137));+#2809=LINE('',#2801,#2112);+#2810=ORIENTED_EDGE('',*,*,#2811,.T.);+#2811=EDGE_CURVE('',#2807,#2812,#2814,.T.);+#2812=VERTEX_POINT('',#2813);+#2813=CARTESIAN_POINT('',(2.05733068201,-1.475,8.326672684689E-17));+#2814=CIRCLE('',#2815,0.23);+#2815=AXIS2_PLACEMENT_3D('',#2816,#88,#2121);+#2816=CARTESIAN_POINT('',(2.05733068201,-1.475,0.23));+#2817=ORIENTED_EDGE('',*,*,#2818,.T.);+#2818=EDGE_CURVE('',#2812,#2819,#2821,.T.);+#2819=VERTEX_POINT('',#2820);+#2820=CARTESIAN_POINT('',(2.45,-1.475,8.326672684689E-17));+#2821=LINE('',#2813,#27);+#2822=ORIENTED_EDGE('',*,*,#2823,.T.);+#2823=EDGE_CURVE('',#2819,#2824,#2826,.T.);+#2824=VERTEX_POINT('',#2825);+#2825=CARTESIAN_POINT('',(2.45,-1.475,0.18));+#2826=LINE('',#2820,#336);+#2827=ORIENTED_EDGE('',*,*,#2828,.T.);+#2828=EDGE_CURVE('',#2824,#2829,#2831,.T.);+#2829=VERTEX_POINT('',#2830);+#2830=CARTESIAN_POINT('',(2.05733068201,-1.475,0.18));+#2831=LINE('',#2825,#73);+#2832=ORIENTED_EDGE('',*,*,#2833,.T.);+#2833=EDGE_CURVE('',#2829,#2834,#2836,.T.);+#2834=VERTEX_POINT('',#2835);+#2835=CARTESIAN_POINT('',(2.008090294359,-1.475,0.221317591117));+#2836=CIRCLE('',#2837,5.E-02);+#2837=AXIS2_PLACEMENT_3D('',#2816,#60,#1039);+#2838=ORIENTED_EDGE('',*,*,#2839,.T.);+#2839=EDGE_CURVE('',#2834,#2840,#2842,.T.);+#2840=VERTEX_POINT('',#2841);+#2841=CARTESIAN_POINT('',(1.976505783193,-1.475,0.424939080863));+#2842=LINE('',#2835,#2148);+#2843=ORIENTED_EDGE('',*,*,#2844,.T.);+#2844=EDGE_CURVE('',#2840,#2845,#2846,.T.);+#2845=VERTEX_POINT('',#2791);+#2846=CIRCLE('',#2847,0.23);+#2847=AXIS2_PLACEMENT_3D('',#2804,#88,#2154);+#2848=ORIENTED_EDGE('',*,*,#2849,.T.);+#2849=EDGE_CURVE('',#2845,#924,#2790,.T.);+#2850=PLANE('',#2851);+#2851=AXIS2_PLACEMENT_3D('',#2852,#88,#13);+#2852=CARTESIAN_POINT('',(1.90066971159,-1.475,0.308518045934));+#2853=ADVANCED_FACE('',(#2854),#2868,.F.);+#2854=FACE_BOUND('',#2855,.F.);+#2855=EDGE_LOOP('',(#2856,#2857,#2864,#2867));+#2856=ORIENTED_EDGE('',*,*,#947,.T.);+#2857=ORIENTED_EDGE('',*,*,#2858,.T.);+#2858=EDGE_CURVE('',#942,#2859,#2861,.T.);+#2859=VERTEX_POINT('',#2860);+#2860=CARTESIAN_POINT('',(1.799240387651,-1.775,0.393682408883));+#2861=CIRCLE('',#2862,5.E-02);+#2862=AXIS2_PLACEMENT_3D('',#2863,#60,#2106);+#2863=CARTESIAN_POINT('',(1.75,-1.775,0.385));+#2864=ORIENTED_EDGE('',*,*,#2865,.F.);+#2865=EDGE_CURVE('',#2800,#2859,#2866,.T.);+#2866=LINE('',#2801,#87);+#2867=ORIENTED_EDGE('',*,*,#2799,.F.);+#2868=CYLINDRICAL_SURFACE('',#2803,5.E-02);+#2869=ADVANCED_FACE('',(#2870),#2917,.T.);+#2870=FACE_BOUND('',#2871,.T.);+#2871=EDGE_LOOP('',(#954,#940,#2857,#2872,#2877,#2884,#2889,#2894,#2899,#2905,#2910,#2915));+#2872=ORIENTED_EDGE('',*,*,#2873,.T.);+#2873=EDGE_CURVE('',#2859,#2874,#2876,.T.);+#2874=VERTEX_POINT('',#2875);+#2875=CARTESIAN_POINT('',(1.830824898817,-1.775,0.190060919137));+#2876=LINE('',#2860,#2112);+#2877=ORIENTED_EDGE('',*,*,#2878,.T.);+#2878=EDGE_CURVE('',#2874,#2879,#2881,.T.);+#2879=VERTEX_POINT('',#2880);+#2880=CARTESIAN_POINT('',(2.05733068201,-1.775,8.326672684689E-17));+#2881=CIRCLE('',#2882,0.23);+#2882=AXIS2_PLACEMENT_3D('',#2883,#88,#2121);+#2883=CARTESIAN_POINT('',(2.05733068201,-1.775,0.23));+#2884=ORIENTED_EDGE('',*,*,#2885,.T.);+#2885=EDGE_CURVE('',#2879,#2886,#2888,.T.);+#2886=VERTEX_POINT('',#2887);+#2887=CARTESIAN_POINT('',(2.45,-1.775,8.326672684689E-17));+#2888=LINE('',#2880,#27);+#2889=ORIENTED_EDGE('',*,*,#2890,.T.);+#2890=EDGE_CURVE('',#2886,#2891,#2893,.T.);+#2891=VERTEX_POINT('',#2892);+#2892=CARTESIAN_POINT('',(2.45,-1.775,0.18));+#2893=LINE('',#2887,#336);+#2894=ORIENTED_EDGE('',*,*,#2895,.T.);+#2895=EDGE_CURVE('',#2891,#2896,#2898,.T.);+#2896=VERTEX_POINT('',#2897);+#2897=CARTESIAN_POINT('',(2.05733068201,-1.775,0.18));+#2898=LINE('',#2892,#73);+#2899=ORIENTED_EDGE('',*,*,#2900,.T.);+#2900=EDGE_CURVE('',#2896,#2901,#2903,.T.);+#2901=VERTEX_POINT('',#2902);+#2902=CARTESIAN_POINT('',(2.008090294359,-1.775,0.221317591117));+#2903=CIRCLE('',#2904,5.E-02);+#2904=AXIS2_PLACEMENT_3D('',#2883,#60,#1039);+#2905=ORIENTED_EDGE('',*,*,#2906,.T.);+#2906=EDGE_CURVE('',#2901,#2907,#2909,.T.);+#2907=VERTEX_POINT('',#2908);+#2908=CARTESIAN_POINT('',(1.976505783193,-1.775,0.424939080863));+#2909=LINE('',#2902,#2148);+#2910=ORIENTED_EDGE('',*,*,#2911,.T.);+#2911=EDGE_CURVE('',#2907,#2912,#2913,.T.);+#2912=VERTEX_POINT('',#1252);+#2913=CIRCLE('',#2914,0.23);+#2914=AXIS2_PLACEMENT_3D('',#2863,#88,#2154);+#2915=ORIENTED_EDGE('',*,*,#2916,.T.);+#2916=EDGE_CURVE('',#2912,#956,#1251,.T.);+#2917=PLANE('',#2918);+#2918=AXIS2_PLACEMENT_3D('',#2919,#88,#13);+#2919=CARTESIAN_POINT('',(1.90066971159,-1.775,0.308518045934));+#2920=ADVANCED_FACE('',(#2921),#2928,.T.);+#2921=FACE_BOUND('',#2922,.F.);+#2922=EDGE_LOOP('',(#2923,#2087,#2926,#2927));+#2923=ORIENTED_EDGE('',*,*,#2924,.T.);+#2924=EDGE_CURVE('',#2018,#2084,#2925,.T.);+#2925=LINE('',#2019,#514);+#2926=ORIENTED_EDGE('',*,*,#1025,.F.);+#2927=ORIENTED_EDGE('',*,*,#2022,.F.);+#2928=CYLINDRICAL_SURFACE('',#2929,0.23);+#2929=AXIS2_PLACEMENT_3D('',#1982,#1345,#1322);+#2930=ADVANCED_FACE('',(#2931),#2940,.F.);+#2931=FACE_BOUND('',#2932,.F.);+#2932=EDGE_LOOP('',(#2933,#2934,#1393,#2937,#2938,#2939));+#2933=ORIENTED_EDGE('',*,*,#1324,.F.);+#2934=ORIENTED_EDGE('',*,*,#2935,.T.);+#2935=EDGE_CURVE('',#1318,#1389,#2936,.T.);+#2936=LINE('',#1233,#514);+#2937=ORIENTED_EDGE('',*,*,#1409,.T.);+#2938=ORIENTED_EDGE('',*,*,#1049,.F.);+#2939=ORIENTED_EDGE('',*,*,#1231,.F.);+#2940=PLANE('',#2941);+#2941=AXIS2_PLACEMENT_3D('',#1233,#1039,#454);+#2942=ADVANCED_FACE('',(#2943),#2952,.F.);+#2943=FACE_BOUND('',#2944,.F.);+#2944=EDGE_LOOP('',(#2945,#2946,#1534,#2949,#2950,#2951));+#2945=ORIENTED_EDGE('',*,*,#1466,.F.);+#2946=ORIENTED_EDGE('',*,*,#2947,.T.);+#2947=EDGE_CURVE('',#1462,#1530,#2948,.T.);+#2948=LINE('',#1406,#514);+#2949=ORIENTED_EDGE('',*,*,#1550,.T.);+#2950=ORIENTED_EDGE('',*,*,#1057,.F.);+#2951=ORIENTED_EDGE('',*,*,#1404,.F.);+#2952=PLANE('',#2953);+#2953=AXIS2_PLACEMENT_3D('',#1406,#1039,#454);+#2954=ADVANCED_FACE('',(#2955),#2964,.F.);+#2955=FACE_BOUND('',#2956,.F.);+#2956=EDGE_LOOP('',(#2957,#2958,#1675,#2961,#2962,#2963));+#2957=ORIENTED_EDGE('',*,*,#1607,.F.);+#2958=ORIENTED_EDGE('',*,*,#2959,.T.);+#2959=EDGE_CURVE('',#1603,#1671,#2960,.T.);+#2960=LINE('',#1547,#514);+#2961=ORIENTED_EDGE('',*,*,#1691,.T.);+#2962=ORIENTED_EDGE('',*,*,#1065,.F.);+#2963=ORIENTED_EDGE('',*,*,#1545,.F.);+#2964=PLANE('',#2965);+#2965=AXIS2_PLACEMENT_3D('',#1547,#1039,#454);+#2966=ADVANCED_FACE('',(#2967),#2976,.F.);+#2967=FACE_BOUND('',#2968,.F.);+#2968=EDGE_LOOP('',(#2969,#2970,#1816,#2973,#2974,#2975));+#2969=ORIENTED_EDGE('',*,*,#1748,.F.);+#2970=ORIENTED_EDGE('',*,*,#2971,.T.);+#2971=EDGE_CURVE('',#1744,#1812,#2972,.T.);+#2972=LINE('',#1688,#514);+#2973=ORIENTED_EDGE('',*,*,#1832,.T.);+#2974=ORIENTED_EDGE('',*,*,#1073,.F.);+#2975=ORIENTED_EDGE('',*,*,#1686,.F.);+#2976=PLANE('',#2977);+#2977=AXIS2_PLACEMENT_3D('',#1688,#1039,#454);+#2978=ADVANCED_FACE('',(#2979),#2988,.F.);+#2979=FACE_BOUND('',#2980,.F.);+#2980=EDGE_LOOP('',(#2981,#2982,#1957,#2985,#2986,#2987));+#2981=ORIENTED_EDGE('',*,*,#1889,.F.);+#2982=ORIENTED_EDGE('',*,*,#2983,.T.);+#2983=EDGE_CURVE('',#1885,#1953,#2984,.T.);+#2984=LINE('',#1829,#514);+#2985=ORIENTED_EDGE('',*,*,#1970,.T.);+#2986=ORIENTED_EDGE('',*,*,#1081,.F.);+#2987=ORIENTED_EDGE('',*,*,#1827,.F.);+#2988=PLANE('',#2989);+#2989=AXIS2_PLACEMENT_3D('',#1829,#1039,#454);+#2990=ADVANCED_FACE('',(#2991,#3006),#3016,.T.);+#2991=FACE_BOUND('',#2992,.T.);+#2992=EDGE_LOOP('',(#1125,#1111,#1093,#2993,#2998,#3003,#1201,#1139));+#2993=ORIENTED_EDGE('',*,*,#2994,.F.);+#2994=EDGE_CURVE('',#2995,#1095,#2997,.T.);+#2995=VERTEX_POINT('',#2996);+#2996=CARTESIAN_POINT('',(-1.25739677592,-1.873293551841,0.95));+#2997=LINE('',#2996,#66);+#2998=ORIENTED_EDGE('',*,*,#2999,.F.);+#2999=EDGE_CURVE('',#3000,#2995,#3002,.T.);+#3000=VERTEX_POINT('',#3001);+#3001=CARTESIAN_POINT('',(1.25739677592,-1.873293551841,0.95));+#3002=LINE('',#3001,#73);+#3003=ORIENTED_EDGE('',*,*,#3004,.F.);+#3004=EDGE_CURVE('',#1198,#3000,#3005,.T.);+#3005=LINE('',#1199,#80);+#3006=FACE_BOUND('',#3007,.T.);+#3007=EDGE_LOOP('',(#3008));+#3008=ORIENTED_EDGE('',*,*,#3009,.T.);+#3009=EDGE_CURVE('',#3010,#3010,#3012,.T.);+#3010=VERTEX_POINT('',#3011);+#3011=CARTESIAN_POINT('',(-0.653793551841,0.923293551841,0.95));+#3012=CIRCLE('',#3013,0.25);+#3013=AXIS2_PLACEMENT_3D('',#3014,#3015,#88);+#3014=CARTESIAN_POINT('',(-0.653793551841,1.173293551841,0.95));+#3015=DIRECTION('',(0.,-0.,-1.));+#3016=PLANE('',#3017);+#3017=AXIS2_PLACEMENT_3D('',#1109,#13,#3018);+#3018=DIRECTION('',(0.557316246265,-0.830300308111,0.));+#3019=ADVANCED_FACE('',(#3020),#3027,.F.);+#3020=FACE_BOUND('',#3021,.F.);+#3021=EDGE_LOOP('',(#3022,#3023,#2993,#3024));+#3022=ORIENTED_EDGE('',*,*,#1236,.T.);+#3023=ORIENTED_EDGE('',*,*,#1099,.T.);+#3024=ORIENTED_EDGE('',*,*,#3025,.F.);+#3025=EDGE_CURVE('',#1237,#2995,#3026,.T.);+#3026=B_SPLINE_CURVE_WITH_KNOTS('',1,(#1238,#2996),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3027=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#1238,#2996),(#446,#1096)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.186676190233),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3028=ADVANCED_FACE('',(#3029),#3038,.F.);+#3029=FACE_BOUND('',#3030,.F.);+#3030=EDGE_LOOP('',(#3031,#3032,#2356,#3035,#3036,#3037));+#3031=ORIENTED_EDGE('',*,*,#2289,.F.);+#3032=ORIENTED_EDGE('',*,*,#3033,.T.);+#3033=EDGE_CURVE('',#2285,#2352,#3034,.T.);+#3034=LINE('',#2231,#87);+#3035=ORIENTED_EDGE('',*,*,#2366,.T.);+#3036=ORIENTED_EDGE('',*,*,#1157,.F.);+#3037=ORIENTED_EDGE('',*,*,#2229,.F.);+#3038=PLANE('',#3039);+#3039=AXIS2_PLACEMENT_3D('',#2231,#1039,#74);+#3040=ADVANCED_FACE('',(#3041),#3050,.F.);+#3041=FACE_BOUND('',#3042,.F.);+#3042=EDGE_LOOP('',(#3043,#3044,#2496,#3047,#3048,#3049));+#3043=ORIENTED_EDGE('',*,*,#2429,.F.);+#3044=ORIENTED_EDGE('',*,*,#3045,.T.);+#3045=EDGE_CURVE('',#2425,#2492,#3046,.T.);+#3046=LINE('',#2371,#87);+#3047=ORIENTED_EDGE('',*,*,#2506,.T.);+#3048=ORIENTED_EDGE('',*,*,#1165,.F.);+#3049=ORIENTED_EDGE('',*,*,#2369,.F.);+#3050=PLANE('',#3051);+#3051=AXIS2_PLACEMENT_3D('',#2371,#1039,#74);+#3052=ADVANCED_FACE('',(#3053),#3062,.F.);+#3053=FACE_BOUND('',#3054,.F.);+#3054=EDGE_LOOP('',(#3055,#3056,#2636,#3059,#3060,#3061));+#3055=ORIENTED_EDGE('',*,*,#2569,.F.);+#3056=ORIENTED_EDGE('',*,*,#3057,.T.);+#3057=EDGE_CURVE('',#2565,#2632,#3058,.T.);+#3058=LINE('',#2511,#87);+#3059=ORIENTED_EDGE('',*,*,#2646,.T.);+#3060=ORIENTED_EDGE('',*,*,#1173,.F.);+#3061=ORIENTED_EDGE('',*,*,#2509,.F.);+#3062=PLANE('',#3063);+#3063=AXIS2_PLACEMENT_3D('',#2511,#1039,#74);+#3064=ADVANCED_FACE('',(#3065),#3074,.F.);+#3065=FACE_BOUND('',#3066,.F.);+#3066=EDGE_LOOP('',(#3067,#3068,#2776,#3071,#3072,#3073));+#3067=ORIENTED_EDGE('',*,*,#2709,.F.);+#3068=ORIENTED_EDGE('',*,*,#3069,.T.);+#3069=EDGE_CURVE('',#2705,#2772,#3070,.T.);+#3070=LINE('',#2651,#87);+#3071=ORIENTED_EDGE('',*,*,#2786,.T.);+#3072=ORIENTED_EDGE('',*,*,#1181,.F.);+#3073=ORIENTED_EDGE('',*,*,#2649,.F.);+#3074=PLANE('',#3075);+#3075=AXIS2_PLACEMENT_3D('',#2651,#1039,#74);+#3076=ADVANCED_FACE('',(#3077),#3086,.F.);+#3077=FACE_BOUND('',#3078,.F.);+#3078=EDGE_LOOP('',(#3079,#3080,#2915,#3083,#3084,#3085));+#3079=ORIENTED_EDGE('',*,*,#2849,.F.);+#3080=ORIENTED_EDGE('',*,*,#3081,.T.);+#3081=EDGE_CURVE('',#2845,#2912,#3082,.T.);+#3082=LINE('',#2791,#87);+#3083=ORIENTED_EDGE('',*,*,#1250,.T.);+#3084=ORIENTED_EDGE('',*,*,#1189,.F.);+#3085=ORIENTED_EDGE('',*,*,#2789,.F.);+#3086=PLANE('',#3087);+#3087=AXIS2_PLACEMENT_3D('',#2791,#1039,#74);+#3088=ADVANCED_FACE('',(#3089),#3096,.F.);+#3089=FACE_BOUND('',#3090,.F.);+#3090=EDGE_LOOP('',(#3091,#3092,#3003,#3095));+#3091=ORIENTED_EDGE('',*,*,#1246,.T.);+#3092=ORIENTED_EDGE('',*,*,#3093,.T.);+#3093=EDGE_CURVE('',#1242,#3000,#3094,.T.);+#3094=B_SPLINE_CURVE_WITH_KNOTS('',1,(#1243,#3001),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3095=ORIENTED_EDGE('',*,*,#1197,.F.);+#3096=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#1195,#1199),(#1243,#3001)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.186676190233),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3097=ADVANCED_FACE('',(#3098),#3105,.T.);+#3098=FACE_BOUND('',#3099,.F.);+#3099=EDGE_LOOP('',(#3100,#2216,#3103,#3104));+#3100=ORIENTED_EDGE('',*,*,#3101,.T.);+#3101=EDGE_CURVE('',#2145,#2213,#3102,.T.);+#3102=LINE('',#2146,#87);+#3103=ORIENTED_EDGE('',*,*,#1213,.F.);+#3104=ORIENTED_EDGE('',*,*,#2151,.F.);+#3105=CYLINDRICAL_SURFACE('',#3106,0.23);+#3106=AXIS2_PLACEMENT_3D('',#2105,#60,#2154);+#3107=ADVANCED_FACE('',(#3108),#3113,.F.);+#3108=FACE_BOUND('',#3109,.F.);+#3109=EDGE_LOOP('',(#3110,#3111,#2998,#3112));+#3110=ORIENTED_EDGE('',*,*,#1241,.T.);+#3111=ORIENTED_EDGE('',*,*,#3025,.T.);+#3112=ORIENTED_EDGE('',*,*,#3093,.F.);+#3113=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#1243,#3001),(#1238,#2996)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.586),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3114=ADVANCED_FACE('',(#3115),#3122,.T.);+#3115=FACE_BOUND('',#3116,.F.);+#3116=EDGE_LOOP('',(#3117,#1387,#3120,#3121));+#3117=ORIENTED_EDGE('',*,*,#3118,.T.);+#3118=EDGE_CURVE('',#1311,#1384,#3119,.T.);+#3119=LINE('',#1312,#514);+#3120=ORIENTED_EDGE('',*,*,#2935,.F.);+#3121=ORIENTED_EDGE('',*,*,#1317,.F.);+#3122=CYLINDRICAL_SURFACE('',#3123,0.23);+#3123=AXIS2_PLACEMENT_3D('',#1268,#1345,#1322);+#3124=ADVANCED_FACE('',(#3125),#3132,.F.);+#3125=FACE_BOUND('',#3126,.F.);+#3126=EDGE_LOOP('',(#3127,#1382,#3130,#3131));+#3127=ORIENTED_EDGE('',*,*,#3128,.T.);+#3128=EDGE_CURVE('',#1304,#1378,#3129,.T.);+#3129=LINE('',#1305,#514);+#3130=ORIENTED_EDGE('',*,*,#3118,.F.);+#3131=ORIENTED_EDGE('',*,*,#1310,.F.);+#3132=PLANE('',#3133);+#3133=AXIS2_PLACEMENT_3D('',#1305,#3134,#1315);+#3134=DIRECTION('',(0.988182672203,-1.130715912709E-17,-0.153280808835));+#3135=ADVANCED_FACE('',(#3136),#3143,.F.);+#3136=FACE_BOUND('',#3137,.F.);+#3137=EDGE_LOOP('',(#3138,#1376,#3141,#3142));+#3138=ORIENTED_EDGE('',*,*,#3139,.T.);+#3139=EDGE_CURVE('',#1299,#1373,#3140,.T.);+#3140=LINE('',#1300,#514);+#3141=ORIENTED_EDGE('',*,*,#3128,.F.);+#3142=ORIENTED_EDGE('',*,*,#1303,.F.);+#3143=CYLINDRICAL_SURFACE('',#3144,5.E-02);+#3144=AXIS2_PLACEMENT_3D('',#1284,#1345,#1039);+#3145=ADVANCED_FACE('',(#3146),#3153,.F.);+#3146=FACE_BOUND('',#3147,.F.);+#3147=EDGE_LOOP('',(#3148,#1371,#3151,#3152));+#3148=ORIENTED_EDGE('',*,*,#3149,.T.);+#3149=EDGE_CURVE('',#1294,#1368,#3150,.T.);+#3150=LINE('',#1295,#514);+#3151=ORIENTED_EDGE('',*,*,#3139,.F.);+#3152=ORIENTED_EDGE('',*,*,#1298,.F.);+#3153=PLANE('',#3154);+#3154=AXIS2_PLACEMENT_3D('',#1295,#1039,#454);+#3155=ADVANCED_FACE('',(#3156),#3163,.F.);+#3156=FACE_BOUND('',#3157,.F.);+#3157=EDGE_LOOP('',(#3158,#1366,#3161,#3162));+#3158=ORIENTED_EDGE('',*,*,#3159,.T.);+#3159=EDGE_CURVE('',#1289,#1363,#3160,.T.);+#3160=LINE('',#1290,#514);+#3161=ORIENTED_EDGE('',*,*,#3149,.F.);+#3162=ORIENTED_EDGE('',*,*,#1293,.F.);+#3163=PLANE('',#3164);+#3164=AXIS2_PLACEMENT_3D('',#1290,#454,#13);+#3165=ADVANCED_FACE('',(#3166),#3173,.F.);+#3166=FACE_BOUND('',#3167,.F.);+#3167=EDGE_LOOP('',(#3168,#1361,#3171,#3172));+#3168=ORIENTED_EDGE('',*,*,#3169,.T.);+#3169=EDGE_CURVE('',#1280,#1356,#3170,.T.);+#3170=LINE('',#1281,#514);+#3171=ORIENTED_EDGE('',*,*,#3159,.F.);+#3172=ORIENTED_EDGE('',*,*,#1288,.F.);+#3173=PLANE('',#3174);+#3174=AXIS2_PLACEMENT_3D('',#1281,#13,#503);+#3175=ADVANCED_FACE('',(#3176),#3183,.T.);+#3176=FACE_BOUND('',#3177,.F.);+#3177=EDGE_LOOP('',(#3178,#1354,#3181,#3182));+#3178=ORIENTED_EDGE('',*,*,#3179,.T.);+#3179=EDGE_CURVE('',#1273,#1351,#3180,.T.);+#3180=LINE('',#1274,#514);+#3181=ORIENTED_EDGE('',*,*,#3169,.F.);+#3182=ORIENTED_EDGE('',*,*,#1279,.F.);+#3183=CYLINDRICAL_SURFACE('',#3184,0.23);+#3184=AXIS2_PLACEMENT_3D('',#1284,#1345,#1286);+#3185=ADVANCED_FACE('',(#3186),#3191,.F.);+#3186=FACE_BOUND('',#3187,.F.);+#3187=EDGE_LOOP('',(#3188,#1349,#3189,#3190));+#3188=ORIENTED_EDGE('',*,*,#1340,.T.);+#3189=ORIENTED_EDGE('',*,*,#3179,.F.);+#3190=ORIENTED_EDGE('',*,*,#1272,.F.);+#3191=PLANE('',#3192);+#3192=AXIS2_PLACEMENT_3D('',#1265,#3193,#1277);+#3193=DIRECTION('',(-0.988182672203,1.130715912709E-17,0.153280808835));+#3194=ADVANCED_FACE('',(#3195),#3202,.T.);+#3195=FACE_BOUND('',#3196,.F.);+#3196=EDGE_LOOP('',(#3197,#1528,#3200,#3201));+#3197=ORIENTED_EDGE('',*,*,#3198,.T.);+#3198=EDGE_CURVE('',#1457,#1525,#3199,.T.);+#3199=LINE('',#1458,#514);+#3200=ORIENTED_EDGE('',*,*,#2947,.F.);+#3201=ORIENTED_EDGE('',*,*,#1461,.F.);+#3202=CYLINDRICAL_SURFACE('',#3203,0.23);+#3203=AXIS2_PLACEMENT_3D('',#1421,#1345,#1322);+#3204=ADVANCED_FACE('',(#3205),#3212,.F.);+#3205=FACE_BOUND('',#3206,.F.);+#3206=EDGE_LOOP('',(#3207,#1523,#3210,#3211));+#3207=ORIENTED_EDGE('',*,*,#3208,.T.);+#3208=EDGE_CURVE('',#1451,#1519,#3209,.T.);+#3209=LINE('',#1452,#514);+#3210=ORIENTED_EDGE('',*,*,#3198,.F.);+#3211=ORIENTED_EDGE('',*,*,#1456,.F.);+#3212=PLANE('',#3213);+#3213=AXIS2_PLACEMENT_3D('',#1452,#3134,#1315);+#3214=ADVANCED_FACE('',(#3215),#3222,.F.);+#3215=FACE_BOUND('',#3216,.F.);+#3216=EDGE_LOOP('',(#3217,#1517,#3220,#3221));+#3217=ORIENTED_EDGE('',*,*,#3218,.T.);+#3218=EDGE_CURVE('',#1446,#1514,#3219,.T.);+#3219=LINE('',#1447,#514);+#3220=ORIENTED_EDGE('',*,*,#3208,.F.);+#3221=ORIENTED_EDGE('',*,*,#1450,.F.);+#3222=CYLINDRICAL_SURFACE('',#3223,5.E-02);+#3223=AXIS2_PLACEMENT_3D('',#1433,#1345,#1039);+#3224=ADVANCED_FACE('',(#3225),#3232,.F.);+#3225=FACE_BOUND('',#3226,.F.);+#3226=EDGE_LOOP('',(#3227,#1512,#3230,#3231));+#3227=ORIENTED_EDGE('',*,*,#3228,.T.);+#3228=EDGE_CURVE('',#1441,#1509,#3229,.T.);+#3229=LINE('',#1442,#514);+#3230=ORIENTED_EDGE('',*,*,#3218,.F.);+#3231=ORIENTED_EDGE('',*,*,#1445,.F.);+#3232=PLANE('',#3233);+#3233=AXIS2_PLACEMENT_3D('',#1442,#1039,#454);+#3234=ADVANCED_FACE('',(#3235),#3242,.F.);+#3235=FACE_BOUND('',#3236,.F.);+#3236=EDGE_LOOP('',(#3237,#1507,#3240,#3241));+#3237=ORIENTED_EDGE('',*,*,#3238,.T.);+#3238=EDGE_CURVE('',#1436,#1504,#3239,.T.);+#3239=LINE('',#1437,#514);+#3240=ORIENTED_EDGE('',*,*,#3228,.F.);+#3241=ORIENTED_EDGE('',*,*,#1440,.F.);+#3242=PLANE('',#3243);+#3243=AXIS2_PLACEMENT_3D('',#1437,#454,#13);+#3244=ADVANCED_FACE('',(#3245),#3252,.F.);+#3245=FACE_BOUND('',#3246,.F.);+#3246=EDGE_LOOP('',(#3247,#1502,#3250,#3251));+#3247=ORIENTED_EDGE('',*,*,#3248,.T.);+#3248=EDGE_CURVE('',#1429,#1497,#3249,.T.);+#3249=LINE('',#1430,#514);+#3250=ORIENTED_EDGE('',*,*,#3238,.F.);+#3251=ORIENTED_EDGE('',*,*,#1435,.F.);+#3252=PLANE('',#3253);+#3253=AXIS2_PLACEMENT_3D('',#1430,#13,#503);+#3254=ADVANCED_FACE('',(#3255),#3262,.T.);+#3255=FACE_BOUND('',#3256,.F.);+#3256=EDGE_LOOP('',(#3257,#1495,#3260,#3261));+#3257=ORIENTED_EDGE('',*,*,#3258,.T.);+#3258=EDGE_CURVE('',#1424,#1492,#3259,.T.);+#3259=LINE('',#1425,#514);+#3260=ORIENTED_EDGE('',*,*,#3248,.F.);+#3261=ORIENTED_EDGE('',*,*,#1428,.F.);+#3262=CYLINDRICAL_SURFACE('',#3263,0.23);+#3263=AXIS2_PLACEMENT_3D('',#1433,#1345,#1286);+#3264=ADVANCED_FACE('',(#3265),#3270,.F.);+#3265=FACE_BOUND('',#3266,.F.);+#3266=EDGE_LOOP('',(#3267,#1490,#3268,#3269));+#3267=ORIENTED_EDGE('',*,*,#1482,.T.);+#3268=ORIENTED_EDGE('',*,*,#3258,.F.);+#3269=ORIENTED_EDGE('',*,*,#1423,.F.);+#3270=PLANE('',#3271);+#3271=AXIS2_PLACEMENT_3D('',#1418,#3193,#1277);+#3272=ADVANCED_FACE('',(#3273),#3280,.T.);+#3273=FACE_BOUND('',#3274,.F.);+#3274=EDGE_LOOP('',(#3275,#1669,#3278,#3279));+#3275=ORIENTED_EDGE('',*,*,#3276,.T.);+#3276=EDGE_CURVE('',#1598,#1666,#3277,.T.);+#3277=LINE('',#1599,#514);+#3278=ORIENTED_EDGE('',*,*,#2959,.F.);+#3279=ORIENTED_EDGE('',*,*,#1602,.F.);+#3280=CYLINDRICAL_SURFACE('',#3281,0.23);+#3281=AXIS2_PLACEMENT_3D('',#1562,#1345,#1322);+#3282=ADVANCED_FACE('',(#3283),#3290,.F.);+#3283=FACE_BOUND('',#3284,.F.);+#3284=EDGE_LOOP('',(#3285,#1664,#3288,#3289));+#3285=ORIENTED_EDGE('',*,*,#3286,.T.);+#3286=EDGE_CURVE('',#1592,#1660,#3287,.T.);+#3287=LINE('',#1593,#514);+#3288=ORIENTED_EDGE('',*,*,#3276,.F.);+#3289=ORIENTED_EDGE('',*,*,#1597,.F.);+#3290=PLANE('',#3291);+#3291=AXIS2_PLACEMENT_3D('',#1593,#3134,#1315);+#3292=ADVANCED_FACE('',(#3293),#3300,.F.);+#3293=FACE_BOUND('',#3294,.F.);+#3294=EDGE_LOOP('',(#3295,#1658,#3298,#3299));+#3295=ORIENTED_EDGE('',*,*,#3296,.T.);+#3296=EDGE_CURVE('',#1587,#1655,#3297,.T.);+#3297=LINE('',#1588,#514);+#3298=ORIENTED_EDGE('',*,*,#3286,.F.);+#3299=ORIENTED_EDGE('',*,*,#1591,.F.);+#3300=CYLINDRICAL_SURFACE('',#3301,5.E-02);+#3301=AXIS2_PLACEMENT_3D('',#1574,#1345,#1039);+#3302=ADVANCED_FACE('',(#3303),#3310,.F.);+#3303=FACE_BOUND('',#3304,.F.);+#3304=EDGE_LOOP('',(#3305,#1653,#3308,#3309));+#3305=ORIENTED_EDGE('',*,*,#3306,.T.);+#3306=EDGE_CURVE('',#1582,#1650,#3307,.T.);+#3307=LINE('',#1583,#514);+#3308=ORIENTED_EDGE('',*,*,#3296,.F.);+#3309=ORIENTED_EDGE('',*,*,#1586,.F.);+#3310=PLANE('',#3311);+#3311=AXIS2_PLACEMENT_3D('',#1583,#1039,#454);+#3312=ADVANCED_FACE('',(#3313),#3320,.F.);+#3313=FACE_BOUND('',#3314,.F.);+#3314=EDGE_LOOP('',(#3315,#1648,#3318,#3319));+#3315=ORIENTED_EDGE('',*,*,#3316,.T.);+#3316=EDGE_CURVE('',#1577,#1645,#3317,.T.);+#3317=LINE('',#1578,#514);+#3318=ORIENTED_EDGE('',*,*,#3306,.F.);+#3319=ORIENTED_EDGE('',*,*,#1581,.F.);+#3320=PLANE('',#3321);+#3321=AXIS2_PLACEMENT_3D('',#1578,#454,#13);+#3322=ADVANCED_FACE('',(#3323),#3330,.F.);+#3323=FACE_BOUND('',#3324,.F.);+#3324=EDGE_LOOP('',(#3325,#1643,#3328,#3329));+#3325=ORIENTED_EDGE('',*,*,#3326,.T.);+#3326=EDGE_CURVE('',#1570,#1638,#3327,.T.);+#3327=LINE('',#1571,#514);+#3328=ORIENTED_EDGE('',*,*,#3316,.F.);+#3329=ORIENTED_EDGE('',*,*,#1576,.F.);+#3330=PLANE('',#3331);+#3331=AXIS2_PLACEMENT_3D('',#1571,#13,#503);+#3332=ADVANCED_FACE('',(#3333),#3340,.T.);+#3333=FACE_BOUND('',#3334,.F.);+#3334=EDGE_LOOP('',(#3335,#1636,#3338,#3339));+#3335=ORIENTED_EDGE('',*,*,#3336,.T.);+#3336=EDGE_CURVE('',#1565,#1633,#3337,.T.);+#3337=LINE('',#1566,#514);+#3338=ORIENTED_EDGE('',*,*,#3326,.F.);+#3339=ORIENTED_EDGE('',*,*,#1569,.F.);+#3340=CYLINDRICAL_SURFACE('',#3341,0.23);+#3341=AXIS2_PLACEMENT_3D('',#1574,#1345,#1286);+#3342=ADVANCED_FACE('',(#3343),#3348,.F.);+#3343=FACE_BOUND('',#3344,.F.);+#3344=EDGE_LOOP('',(#3345,#1631,#3346,#3347));+#3345=ORIENTED_EDGE('',*,*,#1623,.T.);+#3346=ORIENTED_EDGE('',*,*,#3336,.F.);+#3347=ORIENTED_EDGE('',*,*,#1564,.F.);+#3348=PLANE('',#3349);+#3349=AXIS2_PLACEMENT_3D('',#1559,#3193,#1277);+#3350=ADVANCED_FACE('',(#3351),#3358,.T.);+#3351=FACE_BOUND('',#3352,.F.);+#3352=EDGE_LOOP('',(#3353,#1810,#3356,#3357));+#3353=ORIENTED_EDGE('',*,*,#3354,.T.);+#3354=EDGE_CURVE('',#1739,#1807,#3355,.T.);+#3355=LINE('',#1740,#514);+#3356=ORIENTED_EDGE('',*,*,#2971,.F.);+#3357=ORIENTED_EDGE('',*,*,#1743,.F.);+#3358=CYLINDRICAL_SURFACE('',#3359,0.23);+#3359=AXIS2_PLACEMENT_3D('',#1703,#1345,#1322);+#3360=ADVANCED_FACE('',(#3361),#3368,.F.);+#3361=FACE_BOUND('',#3362,.F.);+#3362=EDGE_LOOP('',(#3363,#1805,#3366,#3367));+#3363=ORIENTED_EDGE('',*,*,#3364,.T.);+#3364=EDGE_CURVE('',#1733,#1801,#3365,.T.);+#3365=LINE('',#1734,#514);+#3366=ORIENTED_EDGE('',*,*,#3354,.F.);+#3367=ORIENTED_EDGE('',*,*,#1738,.F.);+#3368=PLANE('',#3369);+#3369=AXIS2_PLACEMENT_3D('',#1734,#3134,#1315);+#3370=ADVANCED_FACE('',(#3371),#3378,.F.);+#3371=FACE_BOUND('',#3372,.F.);+#3372=EDGE_LOOP('',(#3373,#1799,#3376,#3377));+#3373=ORIENTED_EDGE('',*,*,#3374,.T.);+#3374=EDGE_CURVE('',#1728,#1796,#3375,.T.);+#3375=LINE('',#1729,#514);+#3376=ORIENTED_EDGE('',*,*,#3364,.F.);+#3377=ORIENTED_EDGE('',*,*,#1732,.F.);+#3378=CYLINDRICAL_SURFACE('',#3379,5.E-02);+#3379=AXIS2_PLACEMENT_3D('',#1715,#1345,#1039);+#3380=ADVANCED_FACE('',(#3381),#3388,.F.);+#3381=FACE_BOUND('',#3382,.F.);+#3382=EDGE_LOOP('',(#3383,#1794,#3386,#3387));+#3383=ORIENTED_EDGE('',*,*,#3384,.T.);+#3384=EDGE_CURVE('',#1723,#1791,#3385,.T.);+#3385=LINE('',#1724,#514);+#3386=ORIENTED_EDGE('',*,*,#3374,.F.);+#3387=ORIENTED_EDGE('',*,*,#1727,.F.);+#3388=PLANE('',#3389);+#3389=AXIS2_PLACEMENT_3D('',#1724,#1039,#454);+#3390=ADVANCED_FACE('',(#3391),#3398,.F.);+#3391=FACE_BOUND('',#3392,.F.);+#3392=EDGE_LOOP('',(#3393,#1789,#3396,#3397));+#3393=ORIENTED_EDGE('',*,*,#3394,.T.);+#3394=EDGE_CURVE('',#1718,#1786,#3395,.T.);+#3395=LINE('',#1719,#514);+#3396=ORIENTED_EDGE('',*,*,#3384,.F.);+#3397=ORIENTED_EDGE('',*,*,#1722,.F.);+#3398=PLANE('',#3399);+#3399=AXIS2_PLACEMENT_3D('',#1719,#454,#13);+#3400=ADVANCED_FACE('',(#3401),#3408,.F.);+#3401=FACE_BOUND('',#3402,.F.);+#3402=EDGE_LOOP('',(#3403,#1784,#3406,#3407));+#3403=ORIENTED_EDGE('',*,*,#3404,.T.);+#3404=EDGE_CURVE('',#1711,#1779,#3405,.T.);+#3405=LINE('',#1712,#514);+#3406=ORIENTED_EDGE('',*,*,#3394,.F.);+#3407=ORIENTED_EDGE('',*,*,#1717,.F.);+#3408=PLANE('',#3409);+#3409=AXIS2_PLACEMENT_3D('',#1712,#13,#503);+#3410=ADVANCED_FACE('',(#3411),#3418,.T.);+#3411=FACE_BOUND('',#3412,.F.);+#3412=EDGE_LOOP('',(#3413,#1777,#3416,#3417));+#3413=ORIENTED_EDGE('',*,*,#3414,.T.);+#3414=EDGE_CURVE('',#1706,#1774,#3415,.T.);+#3415=LINE('',#1707,#514);+#3416=ORIENTED_EDGE('',*,*,#3404,.F.);+#3417=ORIENTED_EDGE('',*,*,#1710,.F.);+#3418=CYLINDRICAL_SURFACE('',#3419,0.23);+#3419=AXIS2_PLACEMENT_3D('',#1715,#1345,#1286);+#3420=ADVANCED_FACE('',(#3421),#3426,.F.);+#3421=FACE_BOUND('',#3422,.F.);+#3422=EDGE_LOOP('',(#3423,#1772,#3424,#3425));+#3423=ORIENTED_EDGE('',*,*,#1764,.T.);+#3424=ORIENTED_EDGE('',*,*,#3414,.F.);+#3425=ORIENTED_EDGE('',*,*,#1705,.F.);+#3426=PLANE('',#3427);+#3427=AXIS2_PLACEMENT_3D('',#1700,#3193,#1277);+#3428=ADVANCED_FACE('',(#3429),#3436,.T.);+#3429=FACE_BOUND('',#3430,.F.);+#3430=EDGE_LOOP('',(#3431,#1951,#3434,#3435));+#3431=ORIENTED_EDGE('',*,*,#3432,.T.);+#3432=EDGE_CURVE('',#1880,#1948,#3433,.T.);+#3433=LINE('',#1881,#514);+#3434=ORIENTED_EDGE('',*,*,#2983,.F.);+#3435=ORIENTED_EDGE('',*,*,#1884,.F.);+#3436=CYLINDRICAL_SURFACE('',#3437,0.23);+#3437=AXIS2_PLACEMENT_3D('',#1844,#1345,#1322);+#3438=ADVANCED_FACE('',(#3439),#3446,.F.);+#3439=FACE_BOUND('',#3440,.F.);+#3440=EDGE_LOOP('',(#3441,#1946,#3444,#3445));+#3441=ORIENTED_EDGE('',*,*,#3442,.T.);+#3442=EDGE_CURVE('',#1874,#1942,#3443,.T.);+#3443=LINE('',#1875,#514);+#3444=ORIENTED_EDGE('',*,*,#3432,.F.);+#3445=ORIENTED_EDGE('',*,*,#1879,.F.);+#3446=PLANE('',#3447);+#3447=AXIS2_PLACEMENT_3D('',#1875,#3134,#1315);+#3448=ADVANCED_FACE('',(#3449),#3456,.F.);+#3449=FACE_BOUND('',#3450,.F.);+#3450=EDGE_LOOP('',(#3451,#1940,#3454,#3455));+#3451=ORIENTED_EDGE('',*,*,#3452,.T.);+#3452=EDGE_CURVE('',#1869,#1937,#3453,.T.);+#3453=LINE('',#1870,#514);+#3454=ORIENTED_EDGE('',*,*,#3442,.F.);+#3455=ORIENTED_EDGE('',*,*,#1873,.F.);+#3456=CYLINDRICAL_SURFACE('',#3457,5.E-02);+#3457=AXIS2_PLACEMENT_3D('',#1856,#1345,#1039);+#3458=ADVANCED_FACE('',(#3459),#3466,.F.);+#3459=FACE_BOUND('',#3460,.F.);+#3460=EDGE_LOOP('',(#3461,#1935,#3464,#3465));+#3461=ORIENTED_EDGE('',*,*,#3462,.T.);+#3462=EDGE_CURVE('',#1864,#1932,#3463,.T.);+#3463=LINE('',#1865,#514);+#3464=ORIENTED_EDGE('',*,*,#3452,.F.);+#3465=ORIENTED_EDGE('',*,*,#1868,.F.);+#3466=PLANE('',#3467);+#3467=AXIS2_PLACEMENT_3D('',#1865,#1039,#454);+#3468=ADVANCED_FACE('',(#3469),#3476,.F.);+#3469=FACE_BOUND('',#3470,.F.);+#3470=EDGE_LOOP('',(#3471,#1930,#3474,#3475));+#3471=ORIENTED_EDGE('',*,*,#3472,.T.);+#3472=EDGE_CURVE('',#1859,#1927,#3473,.T.);+#3473=LINE('',#1860,#514);+#3474=ORIENTED_EDGE('',*,*,#3462,.F.);+#3475=ORIENTED_EDGE('',*,*,#1863,.F.);+#3476=PLANE('',#3477);+#3477=AXIS2_PLACEMENT_3D('',#1860,#454,#13);+#3478=ADVANCED_FACE('',(#3479),#3486,.F.);+#3479=FACE_BOUND('',#3480,.F.);+#3480=EDGE_LOOP('',(#3481,#1925,#3484,#3485));+#3481=ORIENTED_EDGE('',*,*,#3482,.T.);+#3482=EDGE_CURVE('',#1852,#1920,#3483,.T.);+#3483=LINE('',#1853,#514);+#3484=ORIENTED_EDGE('',*,*,#3472,.F.);+#3485=ORIENTED_EDGE('',*,*,#1858,.F.);+#3486=PLANE('',#3487);+#3487=AXIS2_PLACEMENT_3D('',#1853,#13,#503);+#3488=ADVANCED_FACE('',(#3489),#3496,.T.);+#3489=FACE_BOUND('',#3490,.F.);+#3490=EDGE_LOOP('',(#3491,#1918,#3494,#3495));+#3491=ORIENTED_EDGE('',*,*,#3492,.T.);+#3492=EDGE_CURVE('',#1847,#1915,#3493,.T.);+#3493=LINE('',#1848,#514);+#3494=ORIENTED_EDGE('',*,*,#3482,.F.);+#3495=ORIENTED_EDGE('',*,*,#1851,.F.);+#3496=CYLINDRICAL_SURFACE('',#3497,0.23);+#3497=AXIS2_PLACEMENT_3D('',#1856,#1345,#1286);+#3498=ADVANCED_FACE('',(#3499),#3504,.F.);+#3499=FACE_BOUND('',#3500,.F.);+#3500=EDGE_LOOP('',(#3501,#1913,#3502,#3503));+#3501=ORIENTED_EDGE('',*,*,#1905,.T.);+#3502=ORIENTED_EDGE('',*,*,#3492,.F.);+#3503=ORIENTED_EDGE('',*,*,#1846,.F.);+#3504=PLANE('',#3505);+#3505=AXIS2_PLACEMENT_3D('',#1841,#3193,#1277);+#3506=ADVANCED_FACE('',(#3507),#3514,.F.);+#3507=FACE_BOUND('',#3508,.F.);+#3508=EDGE_LOOP('',(#3509,#2082,#3512,#3513));+#3509=ORIENTED_EDGE('',*,*,#3510,.T.);+#3510=EDGE_CURVE('',#2012,#2078,#3511,.T.);+#3511=LINE('',#2013,#514);+#3512=ORIENTED_EDGE('',*,*,#2924,.F.);+#3513=ORIENTED_EDGE('',*,*,#2017,.F.);+#3514=PLANE('',#3515);+#3515=AXIS2_PLACEMENT_3D('',#2013,#3134,#1315);+#3516=ADVANCED_FACE('',(#3517),#3524,.F.);+#3517=FACE_BOUND('',#3518,.F.);+#3518=EDGE_LOOP('',(#3519,#2076,#3522,#3523));+#3519=ORIENTED_EDGE('',*,*,#3520,.T.);+#3520=EDGE_CURVE('',#2007,#2073,#3521,.T.);+#3521=LINE('',#2008,#514);+#3522=ORIENTED_EDGE('',*,*,#3510,.F.);+#3523=ORIENTED_EDGE('',*,*,#2011,.F.);+#3524=CYLINDRICAL_SURFACE('',#3525,5.E-02);+#3525=AXIS2_PLACEMENT_3D('',#1994,#1345,#1039);+#3526=ADVANCED_FACE('',(#3527),#3534,.F.);+#3527=FACE_BOUND('',#3528,.F.);+#3528=EDGE_LOOP('',(#3529,#2071,#3532,#3533));+#3529=ORIENTED_EDGE('',*,*,#3530,.T.);+#3530=EDGE_CURVE('',#2002,#2068,#3531,.T.);+#3531=LINE('',#2003,#514);+#3532=ORIENTED_EDGE('',*,*,#3520,.F.);+#3533=ORIENTED_EDGE('',*,*,#2006,.F.);+#3534=PLANE('',#3535);+#3535=AXIS2_PLACEMENT_3D('',#2003,#1039,#454);+#3536=ADVANCED_FACE('',(#3537),#3544,.F.);+#3537=FACE_BOUND('',#3538,.F.);+#3538=EDGE_LOOP('',(#3539,#2066,#3542,#3543));+#3539=ORIENTED_EDGE('',*,*,#3540,.T.);+#3540=EDGE_CURVE('',#1997,#2063,#3541,.T.);+#3541=LINE('',#1998,#514);+#3542=ORIENTED_EDGE('',*,*,#3530,.F.);+#3543=ORIENTED_EDGE('',*,*,#2001,.F.);+#3544=PLANE('',#3545);+#3545=AXIS2_PLACEMENT_3D('',#1998,#454,#13);+#3546=ADVANCED_FACE('',(#3547),#3554,.F.);+#3547=FACE_BOUND('',#3548,.F.);+#3548=EDGE_LOOP('',(#3549,#2061,#3552,#3553));+#3549=ORIENTED_EDGE('',*,*,#3550,.T.);+#3550=EDGE_CURVE('',#1990,#2056,#3551,.T.);+#3551=LINE('',#1991,#514);+#3552=ORIENTED_EDGE('',*,*,#3540,.F.);+#3553=ORIENTED_EDGE('',*,*,#1996,.F.);+#3554=PLANE('',#3555);+#3555=AXIS2_PLACEMENT_3D('',#1991,#13,#503);+#3556=ADVANCED_FACE('',(#3557),#3564,.T.);+#3557=FACE_BOUND('',#3558,.F.);+#3558=EDGE_LOOP('',(#3559,#2054,#3562,#3563));+#3559=ORIENTED_EDGE('',*,*,#3560,.T.);+#3560=EDGE_CURVE('',#1985,#2051,#3561,.T.);+#3561=LINE('',#1986,#514);+#3562=ORIENTED_EDGE('',*,*,#3550,.F.);+#3563=ORIENTED_EDGE('',*,*,#1989,.F.);+#3564=CYLINDRICAL_SURFACE('',#3565,0.23);+#3565=AXIS2_PLACEMENT_3D('',#1994,#1345,#1286);+#3566=ADVANCED_FACE('',(#3567),#3572,.F.);+#3567=FACE_BOUND('',#3568,.F.);+#3568=EDGE_LOOP('',(#3569,#2049,#3570,#3571));+#3569=ORIENTED_EDGE('',*,*,#2041,.T.);+#3570=ORIENTED_EDGE('',*,*,#3560,.F.);+#3571=ORIENTED_EDGE('',*,*,#1984,.F.);+#3572=PLANE('',#3573);+#3573=AXIS2_PLACEMENT_3D('',#1979,#3193,#1277);+#3574=ADVANCED_FACE('',(#3575),#3582,.F.);+#3575=FACE_BOUND('',#3576,.F.);+#3576=EDGE_LOOP('',(#3577,#2211,#3580,#3581));+#3577=ORIENTED_EDGE('',*,*,#3578,.T.);+#3578=EDGE_CURVE('',#2139,#2207,#3579,.T.);+#3579=LINE('',#2140,#87);+#3580=ORIENTED_EDGE('',*,*,#3101,.F.);+#3581=ORIENTED_EDGE('',*,*,#2144,.F.);+#3582=PLANE('',#3583);+#3583=AXIS2_PLACEMENT_3D('',#2140,#3584,#2149);+#3584=DIRECTION('',(-0.988182672203,-1.097103155216E-16,-0.153280808835));+#3585=ADVANCED_FACE('',(#3586),#3593,.F.);+#3586=FACE_BOUND('',#3587,.F.);+#3587=EDGE_LOOP('',(#3588,#2205,#3591,#3592));+#3588=ORIENTED_EDGE('',*,*,#3589,.T.);+#3589=EDGE_CURVE('',#2134,#2202,#3590,.T.);+#3590=LINE('',#2135,#87);+#3591=ORIENTED_EDGE('',*,*,#3578,.F.);+#3592=ORIENTED_EDGE('',*,*,#2138,.F.);+#3593=CYLINDRICAL_SURFACE('',#2142,5.E-02);+#3594=ADVANCED_FACE('',(#3595),#3602,.F.);+#3595=FACE_BOUND('',#3596,.F.);+#3596=EDGE_LOOP('',(#3597,#2200,#3600,#3601));+#3597=ORIENTED_EDGE('',*,*,#3598,.T.);+#3598=EDGE_CURVE('',#2129,#2197,#3599,.T.);+#3599=LINE('',#2130,#87);+#3600=ORIENTED_EDGE('',*,*,#3589,.F.);+#3601=ORIENTED_EDGE('',*,*,#2133,.F.);+#3602=PLANE('',#3603);+#3603=AXIS2_PLACEMENT_3D('',#2130,#1039,#74);+#3604=ADVANCED_FACE('',(#3605),#3612,.F.);+#3605=FACE_BOUND('',#3606,.F.);+#3606=EDGE_LOOP('',(#3607,#2195,#3610,#3611));+#3607=ORIENTED_EDGE('',*,*,#3608,.T.);+#3608=EDGE_CURVE('',#2124,#2192,#3609,.T.);+#3609=LINE('',#2125,#87);+#3610=ORIENTED_EDGE('',*,*,#3598,.F.);+#3611=ORIENTED_EDGE('',*,*,#2128,.F.);+#3612=PLANE('',#3613);+#3613=AXIS2_PLACEMENT_3D('',#2125,#74,#13);+#3614=ADVANCED_FACE('',(#3615),#3622,.F.);+#3615=FACE_BOUND('',#3616,.F.);+#3616=EDGE_LOOP('',(#3617,#2190,#3620,#3621));+#3617=ORIENTED_EDGE('',*,*,#3618,.T.);+#3618=EDGE_CURVE('',#2116,#2185,#3619,.T.);+#3619=LINE('',#2117,#87);+#3620=ORIENTED_EDGE('',*,*,#3608,.F.);+#3621=ORIENTED_EDGE('',*,*,#2123,.F.);+#3622=PLANE('',#3623);+#3623=AXIS2_PLACEMENT_3D('',#2117,#13,#28);+#3624=ADVANCED_FACE('',(#3625),#3632,.T.);+#3625=FACE_BOUND('',#3626,.F.);+#3626=EDGE_LOOP('',(#3627,#2183,#3630,#3631));+#3627=ORIENTED_EDGE('',*,*,#3628,.T.);+#3628=EDGE_CURVE('',#2109,#2180,#3629,.T.);+#3629=LINE('',#2110,#87);+#3630=ORIENTED_EDGE('',*,*,#3618,.F.);+#3631=ORIENTED_EDGE('',*,*,#2115,.F.);+#3632=CYLINDRICAL_SURFACE('',#3633,0.23);+#3633=AXIS2_PLACEMENT_3D('',#2120,#60,#2121);+#3634=ADVANCED_FACE('',(#3635),#3640,.F.);+#3635=FACE_BOUND('',#3636,.F.);+#3636=EDGE_LOOP('',(#3637,#2178,#3638,#3639));+#3637=ORIENTED_EDGE('',*,*,#2171,.T.);+#3638=ORIENTED_EDGE('',*,*,#3628,.F.);+#3639=ORIENTED_EDGE('',*,*,#2108,.F.);+#3640=PLANE('',#3641);+#3641=AXIS2_PLACEMENT_3D('',#2102,#3642,#2113);+#3642=DIRECTION('',(0.988182672203,1.097103155216E-16,0.153280808835));+#3643=ADVANCED_FACE('',(#3644),#3651,.T.);+#3644=FACE_BOUND('',#3645,.F.);+#3645=EDGE_LOOP('',(#3646,#2350,#3649,#3650));+#3646=ORIENTED_EDGE('',*,*,#3647,.T.);+#3647=EDGE_CURVE('',#2280,#2347,#3648,.T.);+#3648=LINE('',#2281,#87);+#3649=ORIENTED_EDGE('',*,*,#3033,.F.);+#3650=ORIENTED_EDGE('',*,*,#2284,.F.);+#3651=CYLINDRICAL_SURFACE('',#3652,0.23);+#3652=AXIS2_PLACEMENT_3D('',#2244,#60,#2154);+#3653=ADVANCED_FACE('',(#3654),#3661,.F.);+#3654=FACE_BOUND('',#3655,.F.);+#3655=EDGE_LOOP('',(#3656,#2345,#3659,#3660));+#3656=ORIENTED_EDGE('',*,*,#3657,.T.);+#3657=EDGE_CURVE('',#2274,#2341,#3658,.T.);+#3658=LINE('',#2275,#87);+#3659=ORIENTED_EDGE('',*,*,#3647,.F.);+#3660=ORIENTED_EDGE('',*,*,#2279,.F.);+#3661=PLANE('',#3662);+#3662=AXIS2_PLACEMENT_3D('',#2275,#3584,#2149);+#3663=ADVANCED_FACE('',(#3664),#3671,.F.);+#3664=FACE_BOUND('',#3665,.F.);+#3665=EDGE_LOOP('',(#3666,#2339,#3669,#3670));+#3666=ORIENTED_EDGE('',*,*,#3667,.T.);+#3667=EDGE_CURVE('',#2269,#2336,#3668,.T.);+#3668=LINE('',#2270,#87);+#3669=ORIENTED_EDGE('',*,*,#3657,.F.);+#3670=ORIENTED_EDGE('',*,*,#2273,.F.);+#3671=CYLINDRICAL_SURFACE('',#2277,5.E-02);+#3672=ADVANCED_FACE('',(#3673),#3680,.F.);+#3673=FACE_BOUND('',#3674,.F.);+#3674=EDGE_LOOP('',(#3675,#2334,#3678,#3679));+#3675=ORIENTED_EDGE('',*,*,#3676,.T.);+#3676=EDGE_CURVE('',#2264,#2331,#3677,.T.);+#3677=LINE('',#2265,#87);+#3678=ORIENTED_EDGE('',*,*,#3667,.F.);+#3679=ORIENTED_EDGE('',*,*,#2268,.F.);+#3680=PLANE('',#3681);+#3681=AXIS2_PLACEMENT_3D('',#2265,#1039,#74);+#3682=ADVANCED_FACE('',(#3683),#3690,.F.);+#3683=FACE_BOUND('',#3684,.F.);+#3684=EDGE_LOOP('',(#3685,#2329,#3688,#3689));+#3685=ORIENTED_EDGE('',*,*,#3686,.T.);+#3686=EDGE_CURVE('',#2259,#2326,#3687,.T.);+#3687=LINE('',#2260,#87);+#3688=ORIENTED_EDGE('',*,*,#3676,.F.);+#3689=ORIENTED_EDGE('',*,*,#2263,.F.);+#3690=PLANE('',#3691);+#3691=AXIS2_PLACEMENT_3D('',#2260,#74,#13);+#3692=ADVANCED_FACE('',(#3693),#3700,.F.);+#3693=FACE_BOUND('',#3694,.F.);+#3694=EDGE_LOOP('',(#3695,#2324,#3698,#3699));+#3695=ORIENTED_EDGE('',*,*,#3696,.T.);+#3696=EDGE_CURVE('',#2252,#2319,#3697,.T.);+#3697=LINE('',#2253,#87);+#3698=ORIENTED_EDGE('',*,*,#3686,.F.);+#3699=ORIENTED_EDGE('',*,*,#2258,.F.);+#3700=PLANE('',#3701);+#3701=AXIS2_PLACEMENT_3D('',#2253,#13,#28);+#3702=ADVANCED_FACE('',(#3703),#3710,.T.);+#3703=FACE_BOUND('',#3704,.F.);+#3704=EDGE_LOOP('',(#3705,#2317,#3708,#3709));+#3705=ORIENTED_EDGE('',*,*,#3706,.T.);+#3706=EDGE_CURVE('',#2247,#2314,#3707,.T.);+#3707=LINE('',#2248,#87);+#3708=ORIENTED_EDGE('',*,*,#3696,.F.);+#3709=ORIENTED_EDGE('',*,*,#2251,.F.);+#3710=CYLINDRICAL_SURFACE('',#3711,0.23);+#3711=AXIS2_PLACEMENT_3D('',#2256,#60,#2121);+#3712=ADVANCED_FACE('',(#3713),#3718,.F.);+#3713=FACE_BOUND('',#3714,.F.);+#3714=EDGE_LOOP('',(#3715,#2312,#3716,#3717));+#3715=ORIENTED_EDGE('',*,*,#2305,.T.);+#3716=ORIENTED_EDGE('',*,*,#3706,.F.);+#3717=ORIENTED_EDGE('',*,*,#2246,.F.);+#3718=PLANE('',#3719);+#3719=AXIS2_PLACEMENT_3D('',#2241,#3642,#2113);+#3720=ADVANCED_FACE('',(#3721),#3728,.T.);+#3721=FACE_BOUND('',#3722,.F.);+#3722=EDGE_LOOP('',(#3723,#2490,#3726,#3727));+#3723=ORIENTED_EDGE('',*,*,#3724,.T.);+#3724=EDGE_CURVE('',#2420,#2487,#3725,.T.);+#3725=LINE('',#2421,#87);+#3726=ORIENTED_EDGE('',*,*,#3045,.F.);+#3727=ORIENTED_EDGE('',*,*,#2424,.F.);+#3728=CYLINDRICAL_SURFACE('',#3729,0.23);+#3729=AXIS2_PLACEMENT_3D('',#2384,#60,#2154);+#3730=ADVANCED_FACE('',(#3731),#3738,.F.);+#3731=FACE_BOUND('',#3732,.F.);+#3732=EDGE_LOOP('',(#3733,#2485,#3736,#3737));+#3733=ORIENTED_EDGE('',*,*,#3734,.T.);+#3734=EDGE_CURVE('',#2414,#2481,#3735,.T.);+#3735=LINE('',#2415,#87);+#3736=ORIENTED_EDGE('',*,*,#3724,.F.);+#3737=ORIENTED_EDGE('',*,*,#2419,.F.);+#3738=PLANE('',#3739);+#3739=AXIS2_PLACEMENT_3D('',#2415,#3584,#2149);+#3740=ADVANCED_FACE('',(#3741),#3748,.F.);+#3741=FACE_BOUND('',#3742,.F.);+#3742=EDGE_LOOP('',(#3743,#2479,#3746,#3747));+#3743=ORIENTED_EDGE('',*,*,#3744,.T.);+#3744=EDGE_CURVE('',#2409,#2476,#3745,.T.);+#3745=LINE('',#2410,#87);+#3746=ORIENTED_EDGE('',*,*,#3734,.F.);+#3747=ORIENTED_EDGE('',*,*,#2413,.F.);+#3748=CYLINDRICAL_SURFACE('',#2417,5.E-02);+#3749=ADVANCED_FACE('',(#3750),#3757,.F.);+#3750=FACE_BOUND('',#3751,.F.);+#3751=EDGE_LOOP('',(#3752,#2474,#3755,#3756));+#3752=ORIENTED_EDGE('',*,*,#3753,.T.);+#3753=EDGE_CURVE('',#2404,#2471,#3754,.T.);+#3754=LINE('',#2405,#87);+#3755=ORIENTED_EDGE('',*,*,#3744,.F.);+#3756=ORIENTED_EDGE('',*,*,#2408,.F.);+#3757=PLANE('',#3758);+#3758=AXIS2_PLACEMENT_3D('',#2405,#1039,#74);+#3759=ADVANCED_FACE('',(#3760),#3767,.F.);+#3760=FACE_BOUND('',#3761,.F.);+#3761=EDGE_LOOP('',(#3762,#2469,#3765,#3766));+#3762=ORIENTED_EDGE('',*,*,#3763,.T.);+#3763=EDGE_CURVE('',#2399,#2466,#3764,.T.);+#3764=LINE('',#2400,#87);+#3765=ORIENTED_EDGE('',*,*,#3753,.F.);+#3766=ORIENTED_EDGE('',*,*,#2403,.F.);+#3767=PLANE('',#3768);+#3768=AXIS2_PLACEMENT_3D('',#2400,#74,#13);+#3769=ADVANCED_FACE('',(#3770),#3777,.F.);+#3770=FACE_BOUND('',#3771,.F.);+#3771=EDGE_LOOP('',(#3772,#2464,#3775,#3776));+#3772=ORIENTED_EDGE('',*,*,#3773,.T.);+#3773=EDGE_CURVE('',#2392,#2459,#3774,.T.);+#3774=LINE('',#2393,#87);+#3775=ORIENTED_EDGE('',*,*,#3763,.F.);+#3776=ORIENTED_EDGE('',*,*,#2398,.F.);+#3777=PLANE('',#3778);+#3778=AXIS2_PLACEMENT_3D('',#2393,#13,#28);+#3779=ADVANCED_FACE('',(#3780),#3787,.T.);+#3780=FACE_BOUND('',#3781,.F.);+#3781=EDGE_LOOP('',(#3782,#2457,#3785,#3786));+#3782=ORIENTED_EDGE('',*,*,#3783,.T.);+#3783=EDGE_CURVE('',#2387,#2454,#3784,.T.);+#3784=LINE('',#2388,#87);+#3785=ORIENTED_EDGE('',*,*,#3773,.F.);+#3786=ORIENTED_EDGE('',*,*,#2391,.F.);+#3787=CYLINDRICAL_SURFACE('',#3788,0.23);+#3788=AXIS2_PLACEMENT_3D('',#2396,#60,#2121);+#3789=ADVANCED_FACE('',(#3790),#3795,.F.);+#3790=FACE_BOUND('',#3791,.F.);+#3791=EDGE_LOOP('',(#3792,#2452,#3793,#3794));+#3792=ORIENTED_EDGE('',*,*,#2445,.T.);+#3793=ORIENTED_EDGE('',*,*,#3783,.F.);+#3794=ORIENTED_EDGE('',*,*,#2386,.F.);+#3795=PLANE('',#3796);+#3796=AXIS2_PLACEMENT_3D('',#2381,#3642,#2113);+#3797=ADVANCED_FACE('',(#3798),#3805,.T.);+#3798=FACE_BOUND('',#3799,.F.);+#3799=EDGE_LOOP('',(#3800,#2630,#3803,#3804));+#3800=ORIENTED_EDGE('',*,*,#3801,.T.);+#3801=EDGE_CURVE('',#2560,#2627,#3802,.T.);+#3802=LINE('',#2561,#87);+#3803=ORIENTED_EDGE('',*,*,#3057,.F.);+#3804=ORIENTED_EDGE('',*,*,#2564,.F.);+#3805=CYLINDRICAL_SURFACE('',#3806,0.23);+#3806=AXIS2_PLACEMENT_3D('',#2524,#60,#2154);+#3807=ADVANCED_FACE('',(#3808),#3815,.F.);+#3808=FACE_BOUND('',#3809,.F.);+#3809=EDGE_LOOP('',(#3810,#2625,#3813,#3814));+#3810=ORIENTED_EDGE('',*,*,#3811,.T.);+#3811=EDGE_CURVE('',#2554,#2621,#3812,.T.);+#3812=LINE('',#2555,#87);+#3813=ORIENTED_EDGE('',*,*,#3801,.F.);+#3814=ORIENTED_EDGE('',*,*,#2559,.F.);+#3815=PLANE('',#3816);+#3816=AXIS2_PLACEMENT_3D('',#2555,#3584,#2149);+#3817=ADVANCED_FACE('',(#3818),#3825,.F.);+#3818=FACE_BOUND('',#3819,.F.);+#3819=EDGE_LOOP('',(#3820,#2619,#3823,#3824));+#3820=ORIENTED_EDGE('',*,*,#3821,.T.);+#3821=EDGE_CURVE('',#2549,#2616,#3822,.T.);+#3822=LINE('',#2550,#87);+#3823=ORIENTED_EDGE('',*,*,#3811,.F.);+#3824=ORIENTED_EDGE('',*,*,#2553,.F.);+#3825=CYLINDRICAL_SURFACE('',#2557,5.E-02);+#3826=ADVANCED_FACE('',(#3827),#3834,.F.);+#3827=FACE_BOUND('',#3828,.F.);+#3828=EDGE_LOOP('',(#3829,#2614,#3832,#3833));+#3829=ORIENTED_EDGE('',*,*,#3830,.T.);+#3830=EDGE_CURVE('',#2544,#2611,#3831,.T.);+#3831=LINE('',#2545,#87);+#3832=ORIENTED_EDGE('',*,*,#3821,.F.);+#3833=ORIENTED_EDGE('',*,*,#2548,.F.);+#3834=PLANE('',#3835);+#3835=AXIS2_PLACEMENT_3D('',#2545,#1039,#74);+#3836=ADVANCED_FACE('',(#3837),#3844,.F.);+#3837=FACE_BOUND('',#3838,.F.);+#3838=EDGE_LOOP('',(#3839,#2609,#3842,#3843));+#3839=ORIENTED_EDGE('',*,*,#3840,.T.);+#3840=EDGE_CURVE('',#2539,#2606,#3841,.T.);+#3841=LINE('',#2540,#87);+#3842=ORIENTED_EDGE('',*,*,#3830,.F.);+#3843=ORIENTED_EDGE('',*,*,#2543,.F.);+#3844=PLANE('',#3845);+#3845=AXIS2_PLACEMENT_3D('',#2540,#74,#13);+#3846=ADVANCED_FACE('',(#3847),#3854,.F.);+#3847=FACE_BOUND('',#3848,.F.);+#3848=EDGE_LOOP('',(#3849,#2604,#3852,#3853));+#3849=ORIENTED_EDGE('',*,*,#3850,.T.);+#3850=EDGE_CURVE('',#2532,#2599,#3851,.T.);+#3851=LINE('',#2533,#87);+#3852=ORIENTED_EDGE('',*,*,#3840,.F.);+#3853=ORIENTED_EDGE('',*,*,#2538,.F.);+#3854=PLANE('',#3855);+#3855=AXIS2_PLACEMENT_3D('',#2533,#13,#28);+#3856=ADVANCED_FACE('',(#3857),#3864,.T.);+#3857=FACE_BOUND('',#3858,.F.);+#3858=EDGE_LOOP('',(#3859,#2597,#3862,#3863));+#3859=ORIENTED_EDGE('',*,*,#3860,.T.);+#3860=EDGE_CURVE('',#2527,#2594,#3861,.T.);+#3861=LINE('',#2528,#87);+#3862=ORIENTED_EDGE('',*,*,#3850,.F.);+#3863=ORIENTED_EDGE('',*,*,#2531,.F.);+#3864=CYLINDRICAL_SURFACE('',#3865,0.23);+#3865=AXIS2_PLACEMENT_3D('',#2536,#60,#2121);+#3866=ADVANCED_FACE('',(#3867),#3872,.F.);+#3867=FACE_BOUND('',#3868,.F.);+#3868=EDGE_LOOP('',(#3869,#2592,#3870,#3871));+#3869=ORIENTED_EDGE('',*,*,#2585,.T.);+#3870=ORIENTED_EDGE('',*,*,#3860,.F.);+#3871=ORIENTED_EDGE('',*,*,#2526,.F.);+#3872=PLANE('',#3873);+#3873=AXIS2_PLACEMENT_3D('',#2521,#3642,#2113);+#3874=ADVANCED_FACE('',(#3875),#3882,.T.);+#3875=FACE_BOUND('',#3876,.F.);+#3876=EDGE_LOOP('',(#3877,#2770,#3880,#3881));+#3877=ORIENTED_EDGE('',*,*,#3878,.T.);+#3878=EDGE_CURVE('',#2700,#2767,#3879,.T.);+#3879=LINE('',#2701,#87);+#3880=ORIENTED_EDGE('',*,*,#3069,.F.);+#3881=ORIENTED_EDGE('',*,*,#2704,.F.);+#3882=CYLINDRICAL_SURFACE('',#3883,0.23);+#3883=AXIS2_PLACEMENT_3D('',#2664,#60,#2154);+#3884=ADVANCED_FACE('',(#3885),#3892,.F.);+#3885=FACE_BOUND('',#3886,.F.);+#3886=EDGE_LOOP('',(#3887,#2765,#3890,#3891));+#3887=ORIENTED_EDGE('',*,*,#3888,.T.);+#3888=EDGE_CURVE('',#2694,#2761,#3889,.T.);+#3889=LINE('',#2695,#87);+#3890=ORIENTED_EDGE('',*,*,#3878,.F.);+#3891=ORIENTED_EDGE('',*,*,#2699,.F.);+#3892=PLANE('',#3893);+#3893=AXIS2_PLACEMENT_3D('',#2695,#3584,#2149);+#3894=ADVANCED_FACE('',(#3895),#3902,.F.);+#3895=FACE_BOUND('',#3896,.F.);+#3896=EDGE_LOOP('',(#3897,#2759,#3900,#3901));+#3897=ORIENTED_EDGE('',*,*,#3898,.T.);+#3898=EDGE_CURVE('',#2689,#2756,#3899,.T.);+#3899=LINE('',#2690,#87);+#3900=ORIENTED_EDGE('',*,*,#3888,.F.);+#3901=ORIENTED_EDGE('',*,*,#2693,.F.);+#3902=CYLINDRICAL_SURFACE('',#2697,5.E-02);+#3903=ADVANCED_FACE('',(#3904),#3911,.F.);+#3904=FACE_BOUND('',#3905,.F.);+#3905=EDGE_LOOP('',(#3906,#2754,#3909,#3910));+#3906=ORIENTED_EDGE('',*,*,#3907,.T.);+#3907=EDGE_CURVE('',#2684,#2751,#3908,.T.);+#3908=LINE('',#2685,#87);+#3909=ORIENTED_EDGE('',*,*,#3898,.F.);+#3910=ORIENTED_EDGE('',*,*,#2688,.F.);+#3911=PLANE('',#3912);+#3912=AXIS2_PLACEMENT_3D('',#2685,#1039,#74);+#3913=ADVANCED_FACE('',(#3914),#3921,.F.);+#3914=FACE_BOUND('',#3915,.F.);+#3915=EDGE_LOOP('',(#3916,#2749,#3919,#3920));+#3916=ORIENTED_EDGE('',*,*,#3917,.T.);+#3917=EDGE_CURVE('',#2679,#2746,#3918,.T.);+#3918=LINE('',#2680,#87);+#3919=ORIENTED_EDGE('',*,*,#3907,.F.);+#3920=ORIENTED_EDGE('',*,*,#2683,.F.);+#3921=PLANE('',#3922);+#3922=AXIS2_PLACEMENT_3D('',#2680,#74,#13);+#3923=ADVANCED_FACE('',(#3924),#3931,.F.);+#3924=FACE_BOUND('',#3925,.F.);+#3925=EDGE_LOOP('',(#3926,#2744,#3929,#3930));+#3926=ORIENTED_EDGE('',*,*,#3927,.T.);+#3927=EDGE_CURVE('',#2672,#2739,#3928,.T.);+#3928=LINE('',#2673,#87);+#3929=ORIENTED_EDGE('',*,*,#3917,.F.);+#3930=ORIENTED_EDGE('',*,*,#2678,.F.);+#3931=PLANE('',#3932);+#3932=AXIS2_PLACEMENT_3D('',#2673,#13,#28);+#3933=ADVANCED_FACE('',(#3934),#3941,.T.);+#3934=FACE_BOUND('',#3935,.F.);+#3935=EDGE_LOOP('',(#3936,#2737,#3939,#3940));+#3936=ORIENTED_EDGE('',*,*,#3937,.T.);+#3937=EDGE_CURVE('',#2667,#2734,#3938,.T.);+#3938=LINE('',#2668,#87);+#3939=ORIENTED_EDGE('',*,*,#3927,.F.);+#3940=ORIENTED_EDGE('',*,*,#2671,.F.);+#3941=CYLINDRICAL_SURFACE('',#3942,0.23);+#3942=AXIS2_PLACEMENT_3D('',#2676,#60,#2121);+#3943=ADVANCED_FACE('',(#3944),#3949,.F.);+#3944=FACE_BOUND('',#3945,.F.);+#3945=EDGE_LOOP('',(#3946,#2732,#3947,#3948));+#3946=ORIENTED_EDGE('',*,*,#2725,.T.);+#3947=ORIENTED_EDGE('',*,*,#3937,.F.);+#3948=ORIENTED_EDGE('',*,*,#2666,.F.);+#3949=PLANE('',#3950);+#3950=AXIS2_PLACEMENT_3D('',#2661,#3642,#2113);+#3951=ADVANCED_FACE('',(#3952),#3959,.T.);+#3952=FACE_BOUND('',#3953,.F.);+#3953=EDGE_LOOP('',(#3954,#2910,#3957,#3958));+#3954=ORIENTED_EDGE('',*,*,#3955,.T.);+#3955=EDGE_CURVE('',#2840,#2907,#3956,.T.);+#3956=LINE('',#2841,#87);+#3957=ORIENTED_EDGE('',*,*,#3081,.F.);+#3958=ORIENTED_EDGE('',*,*,#2844,.F.);+#3959=CYLINDRICAL_SURFACE('',#3960,0.23);+#3960=AXIS2_PLACEMENT_3D('',#2804,#60,#2154);+#3961=ADVANCED_FACE('',(#3962),#3969,.F.);+#3962=FACE_BOUND('',#3963,.F.);+#3963=EDGE_LOOP('',(#3964,#2905,#3967,#3968));+#3964=ORIENTED_EDGE('',*,*,#3965,.T.);+#3965=EDGE_CURVE('',#2834,#2901,#3966,.T.);+#3966=LINE('',#2835,#87);+#3967=ORIENTED_EDGE('',*,*,#3955,.F.);+#3968=ORIENTED_EDGE('',*,*,#2839,.F.);+#3969=PLANE('',#3970);+#3970=AXIS2_PLACEMENT_3D('',#2835,#3584,#2149);+#3971=ADVANCED_FACE('',(#3972),#3979,.F.);+#3972=FACE_BOUND('',#3973,.F.);+#3973=EDGE_LOOP('',(#3974,#2899,#3977,#3978));+#3974=ORIENTED_EDGE('',*,*,#3975,.T.);+#3975=EDGE_CURVE('',#2829,#2896,#3976,.T.);+#3976=LINE('',#2830,#87);+#3977=ORIENTED_EDGE('',*,*,#3965,.F.);+#3978=ORIENTED_EDGE('',*,*,#2833,.F.);+#3979=CYLINDRICAL_SURFACE('',#2837,5.E-02);+#3980=ADVANCED_FACE('',(#3981),#3988,.F.);+#3981=FACE_BOUND('',#3982,.F.);+#3982=EDGE_LOOP('',(#3983,#2894,#3986,#3987));+#3983=ORIENTED_EDGE('',*,*,#3984,.T.);+#3984=EDGE_CURVE('',#2824,#2891,#3985,.T.);+#3985=LINE('',#2825,#87);+#3986=ORIENTED_EDGE('',*,*,#3975,.F.);+#3987=ORIENTED_EDGE('',*,*,#2828,.F.);+#3988=PLANE('',#3989);+#3989=AXIS2_PLACEMENT_3D('',#2825,#1039,#74);+#3990=ADVANCED_FACE('',(#3991),#3998,.F.);+#3991=FACE_BOUND('',#3992,.F.);+#3992=EDGE_LOOP('',(#3993,#2889,#3996,#3997));+#3993=ORIENTED_EDGE('',*,*,#3994,.T.);+#3994=EDGE_CURVE('',#2819,#2886,#3995,.T.);+#3995=LINE('',#2820,#87);+#3996=ORIENTED_EDGE('',*,*,#3984,.F.);+#3997=ORIENTED_EDGE('',*,*,#2823,.F.);+#3998=PLANE('',#3999);+#3999=AXIS2_PLACEMENT_3D('',#2820,#74,#13);+#4000=ADVANCED_FACE('',(#4001),#4008,.F.);+#4001=FACE_BOUND('',#4002,.F.);+#4002=EDGE_LOOP('',(#4003,#2884,#4006,#4007));+#4003=ORIENTED_EDGE('',*,*,#4004,.T.);+#4004=EDGE_CURVE('',#2812,#2879,#4005,.T.);+#4005=LINE('',#2813,#87);+#4006=ORIENTED_EDGE('',*,*,#3994,.F.);+#4007=ORIENTED_EDGE('',*,*,#2818,.F.);+#4008=PLANE('',#4009);+#4009=AXIS2_PLACEMENT_3D('',#2813,#13,#28);+#4010=ADVANCED_FACE('',(#4011),#4018,.T.);+#4011=FACE_BOUND('',#4012,.F.);+#4012=EDGE_LOOP('',(#4013,#2877,#4016,#4017));+#4013=ORIENTED_EDGE('',*,*,#4014,.T.);+#4014=EDGE_CURVE('',#2807,#2874,#4015,.T.);+#4015=LINE('',#2808,#87);+#4016=ORIENTED_EDGE('',*,*,#4004,.F.);+#4017=ORIENTED_EDGE('',*,*,#2811,.F.);+#4018=CYLINDRICAL_SURFACE('',#4019,0.23);+#4019=AXIS2_PLACEMENT_3D('',#2816,#60,#2121);+#4020=ADVANCED_FACE('',(#4021),#4026,.F.);+#4021=FACE_BOUND('',#4022,.F.);+#4022=EDGE_LOOP('',(#4023,#2872,#4024,#4025));+#4023=ORIENTED_EDGE('',*,*,#2865,.T.);+#4024=ORIENTED_EDGE('',*,*,#4014,.F.);+#4025=ORIENTED_EDGE('',*,*,#2806,.F.);+#4026=PLANE('',#4027);+#4027=AXIS2_PLACEMENT_3D('',#2801,#3642,#2113);+#4028=ADVANCED_FACE('',(#4029),#4032,.F.);+#4029=FACE_BOUND('',#4030,.T.);+#4030=EDGE_LOOP('',(#4031));+#4031=ORIENTED_EDGE('',*,*,#3009,.F.);+#4032=PLANE('',#4033);+#4033=AXIS2_PLACEMENT_3D('',#3014,#1039,#88);+#4034=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#4038)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#4035,#4036,#4037)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );+#4035=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#4036=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#4037=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#4038=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#4035,'distance_accuracy_value','confusion accuracy');+#4039=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#4040=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#4041,#4051,#4052,#4053,#4054,#4055,#4056,#4057,#4058,#4059,#4060,#4069,#4070,#4071,#4072,#4073,#4074,#4075,#4076,#4077,#4078,#4079,#4080,#4081,#4082,#4083,#4084,#4085,#4086,#4087,#4088,#4089,#4090,#4091,#4092,#4093,#4094,#4095,#4096,#4097,#4098,#4099,#4100,#4101,#4102,#4103,#4104,#4105,#4106,#4107,#4108,#4109,#4110,#4111,#4112,#4113,#4114,#4115,#4116,#4117,#4118,#4119,#4120,#4121,#4122,#4123,#4124,#4125,#4126,#4127,#4128,#4129,#4130,#4131,#4132,#4133,#4134,#4135,#4136,#4137,#4138,#4139,#4140,#4141,#4142,#4143,#4144,#4145,#4146,#4147,#4148,#4149,#4150,#4151,#4152,#4153,#4154,#4155,#4156,#4157,#4158,#4159,#4160,#4161,#4162,#4163,#4164,#4165,#4166,#4167,#4168,#4169,#4170,#4171,#4172,#4173,#4174,#4175,#4176,#4177,#4178,#4179,#4180,#4181,#4182,#4183,#4184,#4185,#4186,#4187,#4188,#4189,#4190,#4191,#4192,#4193,#4194,#4195,#4196,#4197,#4198,#4199,#4200,#4201,#4202,#4203,#4204,#4205,#4206,#4207,#4208,#4209,#4210,#4211,#4212,#4213,#4214,#4215,#4216,#4217,#4218,#4219,#4220,#4221,#4222,#4223,#4224,#4225,#4226,#4227,#4228,#4229,#4230,#4231,#4232,#4233,#4234,#4235,#4236,#4237,#4238,#4239,#4240,#4241,#4242,#4243,#4244,#4245,#4246,#4247,#4248,#4249,#4250,#4251,#4252,#4253,#4254,#4255,#4256,#4257,#4258,#4259,#4260,#4261,#4262,#4263,#4264,#4265,#4266,#4267,#4268,#4269),#4034);+#4041=STYLED_ITEM('color',(#4042),#17);+#4042=PRESENTATION_STYLE_ASSIGNMENT((#4043,#4049));+#4043=SURFACE_STYLE_USAGE(.BOTH.,#4044);+#4044=SURFACE_SIDE_STYLE('',(#4045));+#4045=SURFACE_STYLE_FILL_AREA(#4046);+#4046=FILL_AREA_STYLE('',(#4047));+#4047=FILL_AREA_STYLE_COLOUR('',#4048);+#4048=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#4049=CURVE_STYLE('',#4050,POSITIVE_LENGTH_MEASURE(0.1),#4048);+#4050=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#4051=STYLED_ITEM('color',(#4042),#43);+#4052=STYLED_ITEM('color',(#4042),#119);+#4053=STYLED_ITEM('color',(#4042),#133);+#4054=STYLED_ITEM('color',(#4042),#152);+#4055=STYLED_ITEM('color',(#4042),#166);+#4056=STYLED_ITEM('color',(#4042),#228);+#4057=STYLED_ITEM('color',(#4042),#290);+#4058=STYLED_ITEM('color',(#4042),#304);+#4059=STYLED_ITEM('color',(#4042),#318);+#4060=STYLED_ITEM('color',(#4061),#328);+#4061=PRESENTATION_STYLE_ASSIGNMENT((#4062,#4068));+#4062=SURFACE_STYLE_USAGE(.BOTH.,#4063);+#4063=SURFACE_SIDE_STYLE('',(#4064));+#4064=SURFACE_STYLE_FILL_AREA(#4065);+#4065=FILL_AREA_STYLE('',(#4066));+#4066=FILL_AREA_STYLE_COLOUR('',#4067);+#4067=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#4068=CURVE_STYLE('',#4050,POSITIVE_LENGTH_MEASURE(0.1),#4067);+#4069=STYLED_ITEM('color',(#4061),#348);+#4070=STYLED_ITEM('color',(#4061),#363);+#4071=STYLED_ITEM('color',(#4061),#376);+#4072=STYLED_ITEM('color',(#4042),#385);+#4073=STYLED_ITEM('color',(#4042),#400);+#4074=STYLED_ITEM('color',(#4042),#464);+#4075=STYLED_ITEM('color',(#4042),#475);+#4076=STYLED_ITEM('color',(#4061),#493);+#4077=STYLED_ITEM('color',(#4042),#518);+#4078=STYLED_ITEM('color',(#4061),#536);+#4079=STYLED_ITEM('color',(#4042),#557);+#4080=STYLED_ITEM('color',(#4061),#575);+#4081=STYLED_ITEM('color',(#4042),#596);+#4082=STYLED_ITEM('color',(#4061),#614);+#4083=STYLED_ITEM('color',(#4042),#635);+#4084=STYLED_ITEM('color',(#4061),#653);+#4085=STYLED_ITEM('color',(#4042),#674);+#4086=STYLED_ITEM('color',(#4061),#692);+#4087=STYLED_ITEM('color',(#4042),#713);+#4088=STYLED_ITEM('color',(#4042),#723);+#4089=STYLED_ITEM('color',(#4061),#735);+#4090=STYLED_ITEM('color',(#4042),#756);+#4091=STYLED_ITEM('color',(#4061),#774);+#4092=STYLED_ITEM('color',(#4042),#795);+#4093=STYLED_ITEM('color',(#4061),#813);+#4094=STYLED_ITEM('color',(#4042),#834);+#4095=STYLED_ITEM('color',(#4061),#852);+#4096=STYLED_ITEM('color',(#4042),#873);+#4097=STYLED_ITEM('color',(#4061),#891);+#4098=STYLED_ITEM('color',(#4042),#912);+#4099=STYLED_ITEM('color',(#4061),#930);+#4100=STYLED_ITEM('color',(#4042),#951);+#4101=STYLED_ITEM('color',(#4042),#968);+#4102=STYLED_ITEM('color',(#4042),#983);+#4103=STYLED_ITEM('color',(#4042),#998);+#4104=STYLED_ITEM('color',(#4061),#1009);+#4105=STYLED_ITEM('color',(#4061),#1016);+#4106=STYLED_ITEM('color',(#4042),#1040);+#4107=STYLED_ITEM('color',(#4042),#1102);+#4108=STYLED_ITEM('color',(#4042),#1116);+#4109=STYLED_ITEM('color',(#4042),#1130);+#4110=STYLED_ITEM('color',(#4042),#1144);+#4111=STYLED_ITEM('color',(#4061),#1206);+#4112=STYLED_ITEM('color',(#4042),#1226);+#4113=STYLED_ITEM('color',(#4061),#1257);+#4114=STYLED_ITEM('color',(#4061),#1328);+#4115=STYLED_ITEM('color',(#4061),#1346);+#4116=STYLED_ITEM('color',(#4042),#1399);+#4117=STYLED_ITEM('color',(#4061),#1410);+#4118=STYLED_ITEM('color',(#4061),#1470);+#4119=STYLED_ITEM('color',(#4061),#1487);+#4120=STYLED_ITEM('color',(#4042),#1540);+#4121=STYLED_ITEM('color',(#4061),#1551);+#4122=STYLED_ITEM('color',(#4061),#1611);+#4123=STYLED_ITEM('color',(#4061),#1628);+#4124=STYLED_ITEM('color',(#4042),#1681);+#4125=STYLED_ITEM('color',(#4061),#1692);+#4126=STYLED_ITEM('color',(#4061),#1752);+#4127=STYLED_ITEM('color',(#4061),#1769);+#4128=STYLED_ITEM('color',(#4042),#1822);+#4129=STYLED_ITEM('color',(#4061),#1833);+#4130=STYLED_ITEM('color',(#4061),#1893);+#4131=STYLED_ITEM('color',(#4061),#1910);+#4132=STYLED_ITEM('color',(#4042),#1963);+#4133=STYLED_ITEM('color',(#4061),#1971);+#4134=STYLED_ITEM('color',(#4061),#2029);+#4135=STYLED_ITEM('color',(#4061),#2046);+#4136=STYLED_ITEM('color',(#4061),#2094);+#4137=STYLED_ITEM('color',(#4061),#2159);+#4138=STYLED_ITEM('color',(#4061),#2175);+#4139=STYLED_ITEM('color',(#4042),#2223);+#4140=STYLED_ITEM('color',(#4061),#2233);+#4141=STYLED_ITEM('color',(#4061),#2293);+#4142=STYLED_ITEM('color',(#4061),#2309);+#4143=STYLED_ITEM('color',(#4042),#2362);+#4144=STYLED_ITEM('color',(#4061),#2373);+#4145=STYLED_ITEM('color',(#4061),#2433);+#4146=STYLED_ITEM('color',(#4061),#2449);+#4147=STYLED_ITEM('color',(#4042),#2502);+#4148=STYLED_ITEM('color',(#4061),#2513);+#4149=STYLED_ITEM('color',(#4061),#2573);+#4150=STYLED_ITEM('color',(#4061),#2589);+#4151=STYLED_ITEM('color',(#4042),#2642);+#4152=STYLED_ITEM('color',(#4061),#2653);+#4153=STYLED_ITEM('color',(#4061),#2713);+#4154=STYLED_ITEM('color',(#4061),#2729);+#4155=STYLED_ITEM('color',(#4042),#2782);+#4156=STYLED_ITEM('color',(#4061),#2793);+#4157=STYLED_ITEM('color',(#4061),#2853);+#4158=STYLED_ITEM('color',(#4061),#2869);+#4159=STYLED_ITEM('color',(#4061),#2920);+#4160=STYLED_ITEM('color',(#4061),#2930);+#4161=STYLED_ITEM('color',(#4061),#2942);+#4162=STYLED_ITEM('color',(#4061),#2954);+#4163=STYLED_ITEM('color',(#4061),#2966);+#4164=STYLED_ITEM('color',(#4061),#2978);+#4165=STYLED_ITEM('color',(#4042),#2990);+#4166=STYLED_ITEM('color',(#4042),#3019);+#4167=STYLED_ITEM('color',(#4061),#3028);+#4168=STYLED_ITEM('color',(#4061),#3040);+#4169=STYLED_ITEM('color',(#4061),#3052);+#4170=STYLED_ITEM('color',(#4061),#3064);+#4171=STYLED_ITEM('color',(#4061),#3076);+#4172=STYLED_ITEM('color',(#4042),#3088);+#4173=STYLED_ITEM('color',(#4061),#3097);+#4174=STYLED_ITEM('color',(#4042),#3107);+#4175=STYLED_ITEM('color',(#4061),#3114);+#4176=STYLED_ITEM('color',(#4061),#3124);+#4177=STYLED_ITEM('color',(#4061),#3135);+#4178=STYLED_ITEM('color',(#4061),#3145);+#4179=STYLED_ITEM('color',(#4061),#3155);+#4180=STYLED_ITEM('color',(#4061),#3165);+#4181=STYLED_ITEM('color',(#4061),#3175);+#4182=STYLED_ITEM('color',(#4061),#3185);+#4183=STYLED_ITEM('color',(#4061),#3194);+#4184=STYLED_ITEM('color',(#4061),#3204);+#4185=STYLED_ITEM('color',(#4061),#3214);+#4186=STYLED_ITEM('color',(#4061),#3224);+#4187=STYLED_ITEM('color',(#4061),#3234);+#4188=STYLED_ITEM('color',(#4061),#3244);+#4189=STYLED_ITEM('color',(#4061),#3254);+#4190=STYLED_ITEM('color',(#4061),#3264);+#4191=STYLED_ITEM('color',(#4061),#3272);+#4192=STYLED_ITEM('color',(#4061),#3282);+#4193=STYLED_ITEM('color',(#4061),#3292);+#4194=STYLED_ITEM('color',(#4061),#3302);+#4195=STYLED_ITEM('color',(#4061),#3312);+#4196=STYLED_ITEM('color',(#4061),#3322);+#4197=STYLED_ITEM('color',(#4061),#3332);+#4198=STYLED_ITEM('color',(#4061),#3342);+#4199=STYLED_ITEM('color',(#4061),#3350);+#4200=STYLED_ITEM('color',(#4061),#3360);+#4201=STYLED_ITEM('color',(#4061),#3370);+#4202=STYLED_ITEM('color',(#4061),#3380);+#4203=STYLED_ITEM('color',(#4061),#3390);+#4204=STYLED_ITEM('color',(#4061),#3400);+#4205=STYLED_ITEM('color',(#4061),#3410);+#4206=STYLED_ITEM('color',(#4061),#3420);+#4207=STYLED_ITEM('color',(#4061),#3428);+#4208=STYLED_ITEM('color',(#4061),#3438);+#4209=STYLED_ITEM('color',(#4061),#3448);+#4210=STYLED_ITEM('color',(#4061),#3458);+#4211=STYLED_ITEM('color',(#4061),#3468);+#4212=STYLED_ITEM('color',(#4061),#3478);+#4213=STYLED_ITEM('color',(#4061),#3488);+#4214=STYLED_ITEM('color',(#4061),#3498);+#4215=STYLED_ITEM('color',(#4061),#3506);+#4216=STYLED_ITEM('color',(#4061),#3516);+#4217=STYLED_ITEM('color',(#4061),#3526);+#4218=STYLED_ITEM('color',(#4061),#3536);+#4219=STYLED_ITEM('color',(#4061),#3546);+#4220=STYLED_ITEM('color',(#4061),#3556);+#4221=STYLED_ITEM('color',(#4061),#3566);+#4222=STYLED_ITEM('color',(#4061),#3574);+#4223=STYLED_ITEM('color',(#4061),#3585);+#4224=STYLED_ITEM('color',(#4061),#3594);+#4225=STYLED_ITEM('color',(#4061),#3604);+#4226=STYLED_ITEM('color',(#4061),#3614);+#4227=STYLED_ITEM('color',(#4061),#3624);+#4228=STYLED_ITEM('color',(#4061),#3634);+#4229=STYLED_ITEM('color',(#4061),#3643);+#4230=STYLED_ITEM('color',(#4061),#3653);+#4231=STYLED_ITEM('color',(#4061),#3663);+#4232=STYLED_ITEM('color',(#4061),#3672);+#4233=STYLED_ITEM('color',(#4061),#3682);+#4234=STYLED_ITEM('color',(#4061),#3692);+#4235=STYLED_ITEM('color',(#4061),#3702);+#4236=STYLED_ITEM('color',(#4061),#3712);+#4237=STYLED_ITEM('color',(#4061),#3720);+#4238=STYLED_ITEM('color',(#4061),#3730);+#4239=STYLED_ITEM('color',(#4061),#3740);+#4240=STYLED_ITEM('color',(#4061),#3749);+#4241=STYLED_ITEM('color',(#4061),#3759);+#4242=STYLED_ITEM('color',(#4061),#3769);+#4243=STYLED_ITEM('color',(#4061),#3779);+#4244=STYLED_ITEM('color',(#4061),#3789);+#4245=STYLED_ITEM('color',(#4061),#3797);+#4246=STYLED_ITEM('color',(#4061),#3807);+#4247=STYLED_ITEM('color',(#4061),#3817);+#4248=STYLED_ITEM('color',(#4061),#3826);+#4249=STYLED_ITEM('color',(#4061),#3836);+#4250=STYLED_ITEM('color',(#4061),#3846);+#4251=STYLED_ITEM('color',(#4061),#3856);+#4252=STYLED_ITEM('color',(#4061),#3866);+#4253=STYLED_ITEM('color',(#4061),#3874);+#4254=STYLED_ITEM('color',(#4061),#3884);+#4255=STYLED_ITEM('color',(#4061),#3894);+#4256=STYLED_ITEM('color',(#4061),#3903);+#4257=STYLED_ITEM('color',(#4061),#3913);+#4258=STYLED_ITEM('color',(#4061),#3923);+#4259=STYLED_ITEM('color',(#4061),#3933);+#4260=STYLED_ITEM('color',(#4061),#3943);+#4261=STYLED_ITEM('color',(#4061),#3951);+#4262=STYLED_ITEM('color',(#4061),#3961);+#4263=STYLED_ITEM('color',(#4061),#3971);+#4264=STYLED_ITEM('color',(#4061),#3980);+#4265=STYLED_ITEM('color',(#4061),#3990);+#4266=STYLED_ITEM('color',(#4061),#4000);+#4267=STYLED_ITEM('color',(#4061),#4010);+#4268=STYLED_ITEM('color',(#4061),#4020);+#4269=STYLED_ITEM('color',(#4270),#4028);+#4270=PRESENTATION_STYLE_ASSIGNMENT((#4271,#4277));+#4271=SURFACE_STYLE_USAGE(.BOTH.,#4272);+#4272=SURFACE_SIDE_STYLE('',(#4273));+#4273=SURFACE_STYLE_FILL_AREA(#4274);+#4274=FILL_AREA_STYLE('',(#4275));+#4275=FILL_AREA_STYLE_COLOUR('',#4276);+#4276=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#4277=CURVE_STYLE('',#4050,POSITIVE_LENGTH_MEASURE(0.1),#4276);+ENDSEC;+END-ISO-10303-21;
package.jsonadded+224@@ -0,0 +1,224 @@+{+ "slug": "lt3094emse-trpbf",+ "version": "0.1.0",+ "type": "component",+ "description": "Analog Devices Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, MSOP-12-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lt3094emse#trpbf",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lt3094emse-trpbf.kicad_sym",+ "lt3094emse-trpbf.kicad_mod",+ "lt3094emse-trpbf.glb",+ "lt3094emse-trpbf.step",+ "lt3094emse-trpbf.lbr",+ "docs/hero.png",+ "docs/lt3094emse-trpbf-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lt3094emse-trpbf-hero.glb",+ "lt3094emse-trpbf-hero.overlay.json",+ "lt3094emse-trpbf-etched.glb"+ ],+ "component": {+ "mpn": "LT3094EMSE#TRPBF",+ "manufacturer": "Analog Devices",+ "package": "MSOP-12-EP",+ "pin_count": 13,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908161260523520",+ "parts": {+ "symbol": "lt3094emse-trpbf.kicad_sym",+ "footprint": "lt3094emse-trpbf.kicad_mod",+ "model_3d": "lt3094emse-trpbf-hero.glb",+ "model_3d_plain": "lt3094emse-trpbf-etched.glb",+ "model_3d_step": "lt3094emse-trpbf-etched.step",+ "model_3d_step_plain": "lt3094emse-trpbf.step",+ "lbr": "lt3094emse-trpbf.lbr"+ },+ "distributor_links": {+ "lcsc": "C670494",+ "digikey": "505-LT3094EMSE#TRPBFTR-ND",+ "mouser": "584-LT3094EMSE#TRPBF"+ },+ "distributor_check": {+ "checked_at": "2026-10-13T05:51:40Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "505-LT3094EMSE#TRPBFTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "584-LT3094EMSE#TRPBF",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "power_in",+ "description": "Input supply pin that powers the regulator and requires a bypass capacitor, with a 10µF input capacitor generally sufficing for a nearby battery or supply."+ },+ {+ "number": "2",+ "name": "IN",+ "type": "power_in",+ "description": "Input supply pin that powers the regulator and requires a bypass capacitor, with a 10µF input capacitor generally sufficing for a nearby battery or supply."+ },+ {+ "number": "3",+ "name": "EN/UV",+ "type": "bidirectional",+ "description": "Enable/UVLO pin that shuts the part down when pulled low, turns on above 1.26V (200mV falling hysteresis) or below -1.26V (215mV hysteresis), and must not be floated (tie to IN if unused)."+ },+ {+ "number": "4",+ "name": "PG",+ "type": "output",+ "description": "Open-collector power-good flag that pulls low when PGFB is between 0V and -300mV, and may be left floating if power good is not needed."+ },+ {+ "number": "5",+ "name": "PGFB",+ "type": "input",+ "description": "Power-good feedback input with a -300mV rising trip point and 7mV hysteresis that also activates fast start-up; tie to IN if power good and fast start-up are not used."+ },+ {+ "number": "6",+ "name": "ILIM",+ "type": "input",+ "description": "Current-limit programming pin where a resistor to GND sets the limit with a nominal 3.75A·kΩ scale factor, must not be floated, and should be Kelvin connected to GND for accuracy (tie to GND if unused)."+ },+ {+ "number": "7",+ "name": "VIOC",+ "type": "output",+ "description": "Voltage-for-input-to-output-control amplifier output that drives an upstream regulator feedback node, sinks at least 100µA, and may be left floating if unused."+ },+ {+ "number": "8",+ "name": "SET",+ "type": "input",+ "description": "Inverting error-amplifier input that sinks a precision 100µA through the external resistor to GND, setting VOUT = ISET·RSET over a 0V to -19.5V output range."+ },+ {+ "number": "9",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference pin for the regulator."+ },+ {+ "number": "10",+ "name": "OUTS",+ "type": "input",+ "description": "Output-sense noninverting error-amplifier input that should be Kelvin connected to the output capacitor and load, and must not be driven more than 0.3V below IN."+ },+ {+ "number": "11",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulator output that supplies the load and requires a minimum 10µF output capacitor with ESR below 30mΩ and ESL below 1.5nH; it must not be driven more than 0.3V below IN."+ },+ {+ "number": "12",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulator output that supplies the load and requires a minimum 10µF output capacitor with ESR below 30mΩ and ESL below 1.5nH; it must not be driven more than 0.3V below IN."+ },+ {+ "number": "13",+ "name": "IN",+ "type": "power_in",+ "description": "Exposed pad, internally connected to IN, that must be soldered to the PCB."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The MSE (12-lead MSOP) pin map was read from the garbled two-column Pin Configuration diagram on pag; Pin 13 exposed pad is internally IN; the datasheet states it must be soldered to the PCB. Its pin ty; The datasheet's DD (3mm x 3mm DFN) pinout is a different numbering and was excluded. The LT3094EMSE#"+ ],+ "pages_sent": 11,+ "cost_usd": 0.0897,+ "at": "2026-10-13T05:51:23"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908161260523520",+ "pages": 34,+ "sha256": "c82438ca3359a588",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 13,+ "described": 13,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lt3094emse-trpbf.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 4.039,+ 0.95+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "aa91d924a017af1cf431a9ac1a666764cb189eca8b73b8867170c8507343c645",+ "checked": "2026-10-13",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lt3094emse-trpbf-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 4.039,+ 0.95+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "291d7af1dccf048275acdb40a679097fc34006663f88656762f4399c80449dc0",+ "checked": "2026-10-13",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+230@@ -0,0 +1,230 @@+{+ "slug": "lt3094emse-trpbf",+ "version": "0.1.0",+ "type": "component",+ "description": "Analog Devices Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, MSOP-12-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lt3094emse#trpbf",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lt3094emse-trpbf.kicad_sym",+ "lt3094emse-trpbf.kicad_mod",+ "lt3094emse-trpbf.glb",+ "lt3094emse-trpbf.step",+ "lt3094emse-trpbf.lbr",+ "docs/hero.png",+ "docs/lt3094emse-trpbf-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lt3094emse-trpbf-hero.glb",+ "lt3094emse-trpbf-hero.overlay.json",+ "lt3094emse-trpbf-etched.glb"+ ],+ "component": {+ "mpn": "LT3094EMSE#TRPBF",+ "manufacturer": "Analog Devices",+ "package": "MSOP-12-EP",+ "pin_count": 13,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908161260523520",+ "parts": {+ "symbol": "lt3094emse-trpbf.kicad_sym",+ "footprint": "lt3094emse-trpbf.kicad_mod",+ "model_3d": "lt3094emse-trpbf-hero.glb",+ "model_3d_plain": "lt3094emse-trpbf-etched.glb",+ "model_3d_step": "lt3094emse-trpbf-etched.step",+ "model_3d_step_plain": "lt3094emse-trpbf.step",+ "lbr": "lt3094emse-trpbf.lbr"+ },+ "distributor_links": {+ "lcsc": "C670494",+ "digikey": "505-LT3094EMSE#TRPBFTR-ND",+ "mouser": "584-LT3094EMSE#TRPBF"+ },+ "distributor_check": {+ "checked_at": "2026-10-13T05:51:40Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "505-LT3094EMSE#TRPBFTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "584-LT3094EMSE#TRPBF",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "power_in",+ "description": "Input supply pin that powers the regulator and requires a bypass capacitor, with a 10µF input capacitor generally sufficing for a nearby battery or supply."+ },+ {+ "number": "2",+ "name": "IN",+ "type": "power_in",+ "description": "Input supply pin that powers the regulator and requires a bypass capacitor, with a 10µF input capacitor generally sufficing for a nearby battery or supply."+ },+ {+ "number": "3",+ "name": "EN/UV",+ "type": "bidirectional",+ "description": "Enable/UVLO pin that shuts the part down when pulled low, turns on above 1.26V (200mV falling hysteresis) or below -1.26V (215mV hysteresis), and must not be floated (tie to IN if unused)."+ },+ {+ "number": "4",+ "name": "PG",+ "type": "output",+ "description": "Open-collector power-good flag that pulls low when PGFB is between 0V and -300mV, and may be left floating if power good is not needed."+ },+ {+ "number": "5",+ "name": "PGFB",+ "type": "input",+ "description": "Power-good feedback input with a -300mV rising trip point and 7mV hysteresis that also activates fast start-up; tie to IN if power good and fast start-up are not used."+ },+ {+ "number": "6",+ "name": "ILIM",+ "type": "input",+ "description": "Current-limit programming pin where a resistor to GND sets the limit with a nominal 3.75A·kΩ scale factor, must not be floated, and should be Kelvin connected to GND for accuracy (tie to GND if unused)."+ },+ {+ "number": "7",+ "name": "VIOC",+ "type": "output",+ "description": "Voltage-for-input-to-output-control amplifier output that drives an upstream regulator feedback node, sinks at least 100µA, and may be left floating if unused."+ },+ {+ "number": "8",+ "name": "SET",+ "type": "input",+ "description": "Inverting error-amplifier input that sinks a precision 100µA through the external resistor to GND, setting VOUT = ISET·RSET over a 0V to -19.5V output range."+ },+ {+ "number": "9",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference pin for the regulator."+ },+ {+ "number": "10",+ "name": "OUTS",+ "type": "input",+ "description": "Output-sense noninverting error-amplifier input that should be Kelvin connected to the output capacitor and load, and must not be driven more than 0.3V below IN."+ },+ {+ "number": "11",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulator output that supplies the load and requires a minimum 10µF output capacitor with ESR below 30mΩ and ESL below 1.5nH; it must not be driven more than 0.3V below IN."+ },+ {+ "number": "12",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulator output that supplies the load and requires a minimum 10µF output capacitor with ESR below 30mΩ and ESL below 1.5nH; it must not be driven more than 0.3V below IN."+ },+ {+ "number": "13",+ "name": "IN",+ "type": "power_in",+ "description": "Exposed pad, internally connected to IN, that must be soldered to the PCB."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The MSE (12-lead MSOP) pin map was read from the garbled two-column Pin Configuration diagram on pag; Pin 13 exposed pad is internally IN; the datasheet states it must be soldered to the PCB. Its pin ty; The datasheet's DD (3mm x 3mm DFN) pinout is a different numbering and was excluded. The LT3094EMSE#"+ ],+ "pages_sent": 11,+ "cost_usd": 0.0897,+ "at": "2026-10-13T05:51:23"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588908161260523520",+ "pages": 34,+ "sha256": "c82438ca3359a588",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 13,+ "described": 13,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lt3094emse-trpbf.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 4.039,+ 0.95+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "aa91d924a017af1cf431a9ac1a666764cb189eca8b73b8867170c8507343c645",+ "checked": "2026-10-13",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lt3094emse-trpbf-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 4.039,+ 0.95+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "291d7af1dccf048275acdb40a679097fc34006663f88656762f4399c80449dc0",+ "checked": "2026-10-13",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>lt3094emse-trpbf</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>lt3094emse-trpbf</title>