← Commit history
page.json+10−7@@ -32,7 +32,7 @@ "number": "1", "name": "BS", "type": "passive",- "description": "Bootstrap. Positive rail for the high-side switch's gate driver. Connect a 0.01 \u00b5F capacitor between BS and SW. Absolute max: Vsw \u2212 0.3 V to Vsw + 6 V."+ "description": "Bootstrap. Positive rail for the high-side switch's gate driver. Connect a 0.01 µF capacitor between BS and SW. Absolute max: Vsw − 0.3 V to Vsw + 6 V." }, { "number": "2",@@ -44,7 +44,7 @@ "number": "3", "name": "SW", "type": "power_out",- "description": "Switch output. Connect to the switching end of the inductor. Range \u22120.3 V to VIN + 0.3 V; internal 95 m\u03a9 high-side and low-side MOSFETs; delivers up to 2 A continuous."+ "description": "Switch output. Connect to the switching end of the inductor. Range −0.3 V to VIN + 0.3 V; internal 95 mΩ high-side and low-side MOSFETs; delivers up to 2 A continuous." }, { "number": "4",@@ -56,25 +56,25 @@ "number": "5", "name": "FB", "type": "input",- "description": "Feedback input. Regulated to 0.925 V (typ). Connect to the resistor divider between the output and GND to set the output voltage. Absolute max \u22120.3 V to 5 V."+ "description": "Feedback input. Regulated to 0.925 V (typ). Connect to the resistor divider between the output and GND to set the output voltage. Absolute max −0.3 V to 5 V." }, { "number": "6", "name": "COMP", "type": "output",- "description": "Loop compensation pin from the internal error amplifier (gm \u2248 920 \u00b5A/V). Connect an external R-C network to GND per Stability Compensation guidance. Absolute max \u22120.3 V to 5 V."+ "description": "Loop compensation pin from the internal error amplifier (gm ≈ 920 µA/V). Connect an external R-C network to GND per Stability Compensation guidance. Absolute max −0.3 V to 5 V." }, { "number": "7", "name": "EN", "type": "input",- "description": "Enable input. VEN > 2.7 V turns the IC on; VEN < 1.1 V turns it off (output is discharged when off). Do not leave open - a 200 k\u03a9 pull-up to VIN is recommended for start-up. Absolute max \u22120.3 V to 8 V."+ "description": "Enable input. VEN > 2.7 V turns the IC on; VEN < 1.1 V turns it off (output is discharged when off). Do not leave open - a 200 kΩ pull-up to VIN is recommended for start-up. Absolute max −0.3 V to 8 V." }, { "number": "8", "name": "SS", "type": "passive",- "description": "Soft-start control. Connect a capacitor from SS to GND to program the soft-start period (0.1 \u00b5F \u2248 15 ms; internal 6 \u00b5A charging current). Leave unconnected to disable soft-start."+ "description": "Soft-start control. Connect a capacitor from SS to GND to program the soft-start period (0.1 µF ≈ 15 ms; internal 6 µA charging current). Leave unconnected to disable soft-start." } ], "provenance": {@@ -144,5 +144,8 @@ "docs/lsp5527-s8a-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }