LSM6DSOXTR

@@ -1,13 +1,162 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "lsm6dsoxtr",+  "title": "LSM6DSOXTR",+  "brief": "STMicroelectronics Attitude Sensor/Gyroscope, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "STMicroelectronics Attitude Sensor/Gyroscope, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "sensor",     "lsm6dsoxtr"   ],+  "component": {+    "mpn": "LSM6DSOXTR",+    "manufacturer": "STMicroelectronics",+    "package": "LGA-14(2.5x3)",+    "pin_count": 14,+    "category": "Sensor",+    "subcategory": "Attitude Sensor/Gyroscope",+    "datasheet": "https://www.st.com/resource/en/datasheet/lsm6dsoxtr.pdf",+    "parts": {+      "symbol": "lsm6dsoxtr.kicad_sym",+      "footprint": "lsm6dsoxtr.kicad_mod",+      "model_3d": "lsm6dsoxtr.glb",+      "model_3d_step": "lsm6dsoxtr.step",+      "lbr": "lsm6dsoxtr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "SDO/SA0",+        "type": "bidirectional",+        "description": "SPI 4-wire serial data output (SDO); also serves as the I\u00b2C least-significant bit of the device slave address (SA0) select input."+      },+      {+        "number": "2",+        "name": "SDx",+        "type": "bidirectional",+        "description": "Mode 1: connect to VDDIO or GND. Mode 2: I\u00b2C master serial data (MSDA) to external sensor. Mode 3/4: auxiliary SPI 3/4-wire serial data input (SDI) and 3-wire serial data output (SDO)."+      },+      {+        "number": "3",+        "name": "SCx",+        "type": "bidirectional",+        "description": "Mode 1: connect to VDDIO or GND. Mode 2: I\u00b2C master serial clock (MSCL) to external sensor. Mode 3/4: auxiliary SPI 3/4-wire serial port clock (SPC_Aux)."+      },+      {+        "number": "4",+        "name": "INT1",+        "type": "output",+        "description": "Programmable interrupt output 1, active in both I\u00b2C and SPI operation. Routes configurable event sources (data-ready, FIFO, motion, tap, wakeup, MLC/FSM, etc.)."+      },+      {+        "number": "5",+        "name": "VDDIO",+        "type": "power_in",+        "description": "Power supply for the digital I/O pins. Independent from VDD, minimum 1.62 V. Recommend a 100 nF decoupling capacitor."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "0 V ground return."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "0 V ground return."+      },+      {+        "number": "8",+        "name": "VDD",+        "type": "power_in",+        "description": "Analog/core power supply, 1.71 V to 3.6 V. Recommend a 100 nF decoupling capacitor."+      },+      {+        "number": "9",+        "name": "INT2/DEN/MDRDY",+        "type": "bidirectional",+        "description": "Programmable interrupt output 2 (INT2) or data-enable input (DEN). In Mode 2 it also serves as the I\u00b2C master external synchronization signal (MDRDY) for the sensor-hub."+      },+      {+        "number": "10",+        "name": "OCS_Aux",+        "type": "input",+        "description": "Mode 1/2: leave unconnected (soldered to PCB, electrically floating). Mode 3/4: auxiliary SPI 3/4-wire interface chip-select (enable) input."+      },+      {+        "number": "11",+        "name": "SDO_Aux",+        "type": "output",+        "description": "Mode 1/2: connect to VDD_IO or leave unconnected. Mode 3: leave unconnected (auxiliary SPI 3-wire). Mode 4 auxiliary SPI 4-wire: serial data output (SDO_Aux) for OIS data."+      },+      {+        "number": "12",+        "name": "CS",+        "type": "input",+        "description": "Interface mode select / SPI chip-select. 1 = SPI idle, I\u00b2C / MIPI I3C communication enabled; 0 = SPI communication mode, I\u00b2C / MIPI I3C disabled."+      },+      {+        "number": "13",+        "name": "SCL/SPC",+        "type": "input",+        "description": "I\u00b2C / MIPI I3C serial clock (SCL). In SPI mode this pin is the serial port clock (SPC)."+      },+      {+        "number": "14",+        "name": "SDA/SDI/SDO",+        "type": "bidirectional",+        "description": "I\u00b2C / MIPI I3C serial data (SDA); SPI 4-wire serial data input (SDI); SPI 3-wire bidirectional data (SDO)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.st.com/resource/en/datasheet/lsm6dsoxtr.pdf",+        "pages": 199,+        "sha256": "b9609fb50f6c8eea",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "STMicroelectronics",+      "Package": "LGA-14(2.5x3)",+      "Category": "Sensor",+      "Pins": "14"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "lsm6dsoxtr"+  ],+  "discovery_pitch": "LSM6DSOXTR (STMicroelectronics) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +174,5 @@     "docs/lsm6dsoxtr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file