component
LSM6DSOWTR
Public Made by Adomby adom
STMicroelectronics Accelerometers, LGA-14(2.5x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# LSM6DSOWTR++**STMicroelectronics** · Accelerometers · LGA-14(2.5x3)++LSM6DSOWTR from STMicroelectronics, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SDO/SA0 | output | SPI serial data output (SDO) or I2C device address least significant bit (SA0); high when connected to VDDIO, low when connected to GND. |+| 2 | SDx | output | Mode 1: must be connected to VDDIO or GND; Mode 2: I2C master serial data (MSDA). |+| 3 | SCx | output | Mode 1: must be connected to VDDIO or GND; Mode 2: I2C master serial clock (MSCL). |+| 4 | INT1 | output | Programmable interrupt 1 output; must be pulled high when device operates as MIPI I3CSM pure slave. |+| 5 | VDDIO | power_in | I/O power supply (1.62 V minimum independent IO supply) with recommended 100 nF filter capacitor. |+| 6 | GND | power_in | Ground (0 V supply). |+| 7 | GND | power_in | Ground (0 V supply). |+| 8 | VDD | power_in | Analog power supply (1.71 V to 3.6 V) with recommended 100 nF filter capacitor. |+| 9 | INT2 | output | Programmable interrupt 2 (INT2) / Data Enable (DEN) in Mode 1 or I2C master external synchronization signal (MDRDY) in Mode 2. |+| 10 | NC | unconnected | No connection; leave electrically unconnected and soldered to PCB. |+| 11 | NC | unconnected | No connection; leave electrically unconnected and soldered to PCB. |+| 12 | CS | input | I2C/MIPI I3CSM/SPI mode selection: logic 1 enables I2C/MIPI I3CSM, logic 0 enables SPI. |+| 13 | SCL | bidirectional | I2C/MIPI I3CSM serial clock (SCL) with open-drain operation or SPI serial port clock (SPC) slave input. |+| 14 | SDA | bidirectional | I2C/MIPI I3CSM serial data (SDA) with open-drain operation, SPI serial data input (SDI), or 3-wire serial data output. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LGA-14(2.5x3) |+| Category | Sensors |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `LSM6DSOWTR`+- Footprint: `Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm`+- 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)+- 3D model files: `lsm6dsowtr-etched.step` / `lsm6dsowtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lsm6dsowtr.step` / `lsm6dsowtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589039619942203392) (152 pp, sha256 `18f450de45bf02e8`, retrieved 2026-10-06, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lsm6dsowtr-datasheet.pdf)
page.jsonadded+193@@ -0,0 +1,193 @@+{+ "slug": "lsm6dsowtr",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Accelerometers, LGA-14(2.5x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "sensors",+ "lsm6dsowtr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lsm6dsowtr.kicad_sym",+ "lsm6dsowtr.kicad_mod",+ "lsm6dsowtr.glb",+ "lsm6dsowtr.step",+ "lsm6dsowtr.lbr",+ "docs/hero.png",+ "docs/lsm6dsowtr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lsm6dsowtr-hero.glb",+ "lsm6dsowtr-hero.overlay.json"+ ],+ "component": {+ "mpn": "LSM6DSOWTR",+ "manufacturer": "STMicroelectronics",+ "package": "LGA-14(2.5x3)",+ "pin_count": 14,+ "category": "Sensors",+ "subcategory": "Accelerometers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589039619942203392",+ "parts": {+ "symbol": "lsm6dsowtr.kicad_sym",+ "footprint": "lsm6dsowtr.kicad_mod",+ "model_3d": "lsm6dsowtr-hero.glb",+ "model_3d_plain": "lsm6dsowtr.glb",+ "model_3d_step": "lsm6dsowtr-etched.step",+ "model_3d_step_plain": "lsm6dsowtr.step",+ "lbr": "lsm6dsowtr.lbr"+ },+ "distributor_links": {+ "lcsc": 2829074,+ "mouser": "511-LSM6DSOWTR"+ },+ "distributor_check": {+ "checked_at": "2026-10-06T01:18:15Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": "511-LSM6DSOWTR",+ "status": "found",+ "lifecycle": "Obsolete"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "SDO/SA0",+ "type": "output",+ "description": "SPI serial data output (SDO) or I2C device address least significant bit (SA0); high when connected to VDDIO, low when connected to GND."+ },+ {+ "number": "2",+ "name": "SDx",+ "type": "output",+ "description": "Mode 1: must be connected to VDDIO or GND; Mode 2: I2C master serial data (MSDA)."+ },+ {+ "number": "3",+ "name": "SCx",+ "type": "output",+ "description": "Mode 1: must be connected to VDDIO or GND; Mode 2: I2C master serial clock (MSCL)."+ },+ {+ "number": "4",+ "name": "INT1",+ "type": "output",+ "description": "Programmable interrupt 1 output; must be pulled high when device operates as MIPI I3CSM pure slave."+ },+ {+ "number": "5",+ "name": "VDDIO",+ "type": "power_in",+ "description": "I/O power supply (1.62 V minimum independent IO supply) with recommended 100 nF filter capacitor."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground (0 V supply)."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground (0 V supply)."+ },+ {+ "number": "8",+ "name": "VDD",+ "type": "power_in",+ "description": "Analog power supply (1.71 V to 3.6 V) with recommended 100 nF filter capacitor."+ },+ {+ "number": "9",+ "name": "INT2",+ "type": "output",+ "description": "Programmable interrupt 2 (INT2) / Data Enable (DEN) in Mode 1 or I2C master external synchronization signal (MDRDY) in Mode 2."+ },+ {+ "number": "10",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave electrically unconnected and soldered to PCB."+ },+ {+ "number": "11",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection; leave electrically unconnected and soldered to PCB."+ },+ {+ "number": "12",+ "name": "CS",+ "type": "input",+ "description": "I2C/MIPI I3CSM/SPI mode selection: logic 1 enables I2C/MIPI I3CSM, logic 0 enables SPI."+ },+ {+ "number": "13",+ "name": "SCL",+ "type": "bidirectional",+ "description": "I2C/MIPI I3CSM serial clock (SCL) with open-drain operation or SPI serial port clock (SPC) slave input."+ },+ {+ "number": "14",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C/MIPI I3CSM serial data (SDA) with open-drain operation, SPI serial data input (SDI), or 3-wire serial data output."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 24,+ "cost_usd": 0.2362,+ "at": "2026-10-06T01:18:02"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589039619942203392",+ "pages": 152,+ "sha256": "18f450de45bf02e8",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}