component
LSM6DSOTR
Public Made by Adomby adom
STMicroelectronics Attitude Sensor/Gyroscope, LGA-14(2.5x3). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+152−8@@ -1,13 +1,162 @@ {+ "schema_version": 1,+ "type": "component", "slug": "lsm6dsotr",+ "title": "LSM6DSOTR",+ "brief": "STMicroelectronics Attitude Sensor/Gyroscope, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "STMicroelectronics Attitude Sensor/Gyroscope, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "sensor", "lsm6dsotr" ],+ "component": {+ "mpn": "LSM6DSOTR",+ "manufacturer": "STMicroelectronics",+ "package": "LGA-14(2.5x3)",+ "pin_count": 14,+ "category": "Sensor",+ "subcategory": "Attitude Sensor/Gyroscope",+ "datasheet": "https://www.st.com/resource/en/datasheet/lsm6dsotr.pdf",+ "parts": {+ "symbol": "lsm6dsotr.kicad_sym",+ "footprint": "lsm6dsotr.kicad_mod",+ "model_3d": "lsm6dsotr.glb",+ "model_3d_step": "lsm6dsotr.step",+ "lbr": "lsm6dsotr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "SDO/SA0",+ "type": "bidirectional",+ "description": "SPI 4-wire serial data output (SDO) in SPI mode; also serves as the least-significant bit of the I2C slave address (SA0) - tied high sets I2C address 1101011b, tied low sets 1101010b."+ },+ {+ "number": "2",+ "name": "SDx",+ "type": "bidirectional",+ "description": "Sensor-hub / auxiliary interface data pin. Mode 1: tie to VDDIO or GND. Mode 2: master I2C serial data (MSDA). Mode 3/4: auxiliary SPI 3/4-wire serial data input (SDI) and SPI 3-wire serial data output (SDO)."+ },+ {+ "number": "3",+ "name": "SCx",+ "type": "bidirectional",+ "description": "Sensor-hub / auxiliary interface clock pin. Mode 1: tie to VDDIO or GND. Mode 2: master I2C serial clock (MSCL). Mode 3/4: auxiliary SPI 3/4-wire serial port clock (SPC_Aux)."+ },+ {+ "number": "4",+ "name": "INT1",+ "type": "output",+ "description": "Programmable interrupt 1 output, available in both I2C and SPI modes; polarity and event mapping (data ready, FIFO threshold/full/ovr, wakeup, free-fall, tap, 6D, tilt, SMD, FSM, etc.) are register-configurable."+ },+ {+ "number": "5",+ "name": "VDDIO",+ "type": "power_in",+ "description": "Power supply for the digital I/O pins. Operating range 1.62 V to 3.6 V. A 100 nF filter capacitor to GND is recommended."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "0 V supply / device ground reference."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "0 V supply / device ground reference."+ },+ {+ "number": "8",+ "name": "VDD",+ "type": "power_in",+ "description": "Analog / core supply voltage. Operating range 1.71 V to 3.6 V (typ 1.8 V). A 100 nF filter capacitor to GND is recommended."+ },+ {+ "number": "9",+ "name": "INT2/DEN",+ "type": "bidirectional",+ "description": "Programmable interrupt 2 (INT2) output, doubles as Data ENable (DEN) input. In Mode 2 it can also serve as MDRDY, the I2C-master external synchronization signal."+ },+ {+ "number": "10",+ "name": "OCS_Aux",+ "type": "input",+ "description": "Auxiliary SPI interface chip-select / enable. In Modes 1 and 2 (no auxiliary SPI): leave electrically unconnected but soldered to the PCB."+ },+ {+ "number": "11",+ "name": "SDO_Aux",+ "type": "tri_state",+ "description": "Auxiliary SPI 4-wire serial data output (SDO_Aux). In auxiliary-SPI 3-wire mode, and in Modes 1/2 that do not use the auxiliary interface, tie to VDD_IO or leave electrically unconnected but soldered to the PCB."+ },+ {+ "number": "12",+ "name": "CS",+ "type": "input",+ "description": "I2C/MIPI-I3C vs SPI interface-mode select and SPI chip-select. Tie high (1) for SPI idle / I2C\u00b7I3C communication enabled; drive low (0) for SPI communication / I2C\u00b7I3C disabled."+ },+ {+ "number": "13",+ "name": "SCL/SPC",+ "type": "input",+ "description": "Main host interface serial clock: I2C/MIPI I3C serial clock (SCL) when I2C/I3C is selected, or SPI serial port clock (SPC) when SPI is selected."+ },+ {+ "number": "14",+ "name": "SDA/SDI/SDO",+ "type": "bidirectional",+ "description": "Main host interface serial data: I2C/MIPI I3C serial data (SDA) when I2C/I3C is selected, SPI serial data input (SDI) in 4-wire SPI mode, or 3-wire SPI serial data output (SDO) when 3-wire SPI is enabled via CTRL3_C (SIM)."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.st.com/resource/en/datasheet/lsm6dsotr.pdf",+ "pages": 172,+ "sha256": "1074e39739595e97",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "STMicroelectronics",+ "Package": "LGA-14(2.5x3)",+ "Category": "Sensor",+ "Pins": "14"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "lsm6dsotr"+ ],+ "discovery_pitch": "LSM6DSOTR (STMicroelectronics) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +174,5 @@ "docs/lsm6dsotr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }