← Commit history

Initial commit: component/lsm6dso32tr

Ray ·3d012af1a1 ·
2 files changed +225
README.mdadded+49
@@ -0,0 +1,49 @@+# LSM6DSO32TR++**STMicroelectronics** · Accelerometers · LGA-14(2.5x3)++LSM6DSO32TR from STMicroelectronics, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SDO/SA0 | output | SPI 4-wire serial data output (SDO) in SPI mode; I²C least significant bit of device address (SA0) in I²C/MIPI I3CSM mode, typically strapped to VDDIO or GND. |+| 2 | SDx | bidirectional | I²C master serial data line (MSDA) in Mode 2; unused in Mode 1 (connect to VDDIO or GND). |+| 3 | SCx | bidirectional | I²C master serial clock line (MSCL) in Mode 2; unused in Mode 1 (connect to VDDIO or GND). |+| 4 | INT1 | output | Programmable interrupt output 1; must be strapped to logic '1' (VDDIO) when device is used as MIPI I3CSM pure slave. |+| 5 | VDDIO | power_in | I/O power supply, 1.62 V minimum; use 100 nF bypass filter capacitor. |+| 6 | GND | power_in | Ground reference, 0 V. |+| 7 | GND | power_in | Ground reference, 0 V. |+| 8 | VDD | power_in | Analog power supply 1.71 V to 3.6 V; use 100 nF bypass filter capacitor. |+| 9 | INT2 | output | Programmable interrupt output 2 (INT2), data enable (DEN), or I²C master external synchronization signal (MDRDY) depending on register configuration and mode. |+| 10 | NC | unconnected | Leave electrically unconnected; solder pad must be connected to PCB. |+| 11 | NC | unconnected | Leave electrically unconnected; solder pad must be connected to PCB. |+| 12 | CS | input | Chip select / interface mode selection: logic '1' enables I²C/MIPI I3CSM communication; logic '0' enables SPI communication. |+| 13 | SCL | bidirectional | I²C/MIPI I3CSM serial clock (SCL) in I²C/MIPI I3CSM mode; SPI serial port clock (SPC) in SPI mode. |+| 14 | SDA | bidirectional | I²C/MIPI I3CSM serial data (SDA) in I²C/MIPI I3CSM mode; SPI serial data input (SDI) in 4-wire SPI mode; 3-wire SPI serial data output (SDO) in 3-wire SPI mode. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LGA-14(2.5x3) |+| Category | Sensors |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `LSM6DSO32TR`+- Footprint: `Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm`+- 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588926227138138112) (153 pp, sha256 `d1776336f5060da0`, retrieved 2026-09-17, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lsm6dso32tr-datasheet.pdf)
page.jsonadded+176
@@ -0,0 +1,176 @@+{+  "slug": "lsm6dso32tr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Accelerometers, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensors",+    "lsm6dso32tr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lsm6dso32tr.kicad_sym",+    "lsm6dso32tr.kicad_mod",+    "lsm6dso32tr.glb",+    "lsm6dso32tr.step",+    "lsm6dso32tr.lbr",+    "docs/hero.png",+    "docs/lsm6dso32tr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LSM6DSO32TR",+    "manufacturer": "STMicroelectronics",+    "package": "LGA-14(2.5x3)",+    "pin_count": 14,+    "category": "Sensors",+    "subcategory": "Accelerometers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588926227138138112",+    "parts": {+      "symbol": "lsm6dso32tr.kicad_sym",+      "footprint": "lsm6dso32tr.kicad_mod",+      "model_3d": "lsm6dso32tr.glb",+      "model_3d_step": "lsm6dso32tr.step",+      "lbr": "lsm6dso32tr.lbr"+    },+    "distributor_links": {+      "lcsc": "C1864162"+    },+    "pins": [+      {+        "number": "1",+        "name": "SDO/SA0",+        "type": "output",+        "description": "SPI 4-wire serial data output (SDO) in SPI mode; I²C least significant bit of device address (SA0) in I²C/MIPI I3CSM mode, typically strapped to VDDIO or GND."+      },+      {+        "number": "2",+        "name": "SDx",+        "type": "bidirectional",+        "description": "I²C master serial data line (MSDA) in Mode 2; unused in Mode 1 (connect to VDDIO or GND)."+      },+      {+        "number": "3",+        "name": "SCx",+        "type": "bidirectional",+        "description": "I²C master serial clock line (MSCL) in Mode 2; unused in Mode 1 (connect to VDDIO or GND)."+      },+      {+        "number": "4",+        "name": "INT1",+        "type": "output",+        "description": "Programmable interrupt output 1; must be strapped to logic '1' (VDDIO) when device is used as MIPI I3CSM pure slave."+      },+      {+        "number": "5",+        "name": "VDDIO",+        "type": "power_in",+        "description": "I/O power supply, 1.62 V minimum; use 100 nF bypass filter capacitor."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference, 0 V."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference, 0 V."+      },+      {+        "number": "8",+        "name": "VDD",+        "type": "power_in",+        "description": "Analog power supply 1.71 V to 3.6 V; use 100 nF bypass filter capacitor."+      },+      {+        "number": "9",+        "name": "INT2",+        "type": "output",+        "description": "Programmable interrupt output 2 (INT2), data enable (DEN), or I²C master external synchronization signal (MDRDY) depending on register configuration and mode."+      },+      {+        "number": "10",+        "name": "NC",+        "type": "unconnected",+        "description": "Leave electrically unconnected; solder pad must be connected to PCB."+      },+      {+        "number": "11",+        "name": "NC",+        "type": "unconnected",+        "description": "Leave electrically unconnected; solder pad must be connected to PCB."+      },+      {+        "number": "12",+        "name": "CS",+        "type": "input",+        "description": "Chip select / interface mode selection: logic '1' enables I²C/MIPI I3CSM communication; logic '0' enables SPI communication."+      },+      {+        "number": "13",+        "name": "SCL",+        "type": "bidirectional",+        "description": "I²C/MIPI I3CSM serial clock (SCL) in I²C/MIPI I3CSM mode; SPI serial port clock (SPC) in SPI mode."+      },+      {+        "number": "14",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I²C/MIPI I3CSM serial data (SDA) in I²C/MIPI I3CSM mode; SPI serial data input (SDI) in 4-wire SPI mode; 3-wire SPI serial data output (SDO) in 3-wire SPI mode."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pins SDx and SCx are mode-dependent: functional as I²C master lines (MSDA, MSCL) only in Mode 2; in ; Pin INT2 has multiple configurable functions (interrupt output, data enable input, or master ready s"+        ],+        "pages_sent": 21,+        "cost_usd": 0.3451,+        "at": "2026-09-17T18:21:14"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588926227138138112",+        "pages": 153,+        "sha256": "d1776336f5060da0",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file