← Commit history

Publish 0.1.1

Ray ·821b4909ce · ·parent 5e34fe0
4 files changed +184−176
README.md+3−3
@@ -8,9 +8,9 @@ LR8341A-T36 from LR, in a SOT-23-3L. Pinout and pin descriptions extracted from  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VSS | power_in | Ground pin (labelled VSS in the SOT23-3L drawing and GND in the block diagram), the reference for all voltage values. |-| 2 | VOUT | power_out | Regulated 3.6V output (±1% at VIN=VOUT+2V, IOUT=10mA) delivering up to 100mA, needs a 1-10uF output capacitor and is short-circuit limited to 15mA typical. |-| 3 | VIN | power_in | Input supply pin accepting up to 40V (absolute maximum 55V), which needs a bypass capacitor close to the pin. |+| 1 | VSS | power_in | Ground pin (labelled VSS in the pin drawing and GND in the block diagram), the reference for all voltage values. |+| 2 | VOUT | power_out | Regulated 3.6V output (LR8341A-T36, ±2% tolerance) delivering 100mA, with short-circuit current limited to 15mA typ. and a recommended 1-10uF output capacitor. |+| 3 | VIN | power_in | Supply input accepting up to 40V operating (55V absolute maximum), with a bypass capacitor of 1-10uF recommended. |  ## Key specifications 
lr8341a-t36-hero.overlay.json+151−146
@@ -1,150 +1,155 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "LR8341A-T36",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 3,-      "span_mm": 3.6,-      "dash_mm": 0.12,-      "gap_mm": 0.072,-      "pad_stroke_mm": 0.03-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 8,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 3,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }+ "spec": "adom-hero 1.4",+ "mpn": "LR8341A-T36",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 3,+   "span_mm": 3.6,+   "dash_mm": 0.12,+   "gap_mm": 0.072,+   "pad_stroke_mm": 0.03   },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.288,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -1.25,-      1.25,-      -1.15,-      1.15-    ],-    "pads_bbox_mm": [-      -1.8,-      1.8,-      -1.25,-      1.25-    ],-    "seating_z_mm": 0.0+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 8,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }   },-  "sources": {-    "glb": "lr8341a-t36-etched.glb",-    "glb_sha256": "0c930f28f5e8d4d91c9a467af99ce8cea080480f59e2f0931487c85234ba7393",-    "footprint": "lr8341a-t36.kicad_mod",-    "footprint_sha256": "2a1965f25dd170a876bb343d2a7cba4e69eebb04950f884971d672fd6ead5748",-    "pins": "page.json component.pins",-    "pins_sha256": "601c51ad1b9d5eb62ee7da1fbc2677f8beb44ad9b116b38ac43e348be8b8acd5"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "VSS",-      "x": -1.95,-      "y": -0.95,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "VOUT",-      "x": -1.95,-      "y": 0.95,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "VIN",-      "x": 1.95,-      "y": 0.0,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 3,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.288,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -1.25,+   1.25,+   -1.15,+   1.15+  ],+  "pads_bbox_mm": [+   -1.8,+   1.8,+   -1.25,+   1.25   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -1.1375,-        -0.95-      ],-      "size_mm": [-        1.325,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -1.1375,-        0.95-      ],-      "size_mm": [-        1.325,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        1.1375,-        0.0-      ],-      "size_mm": [-        1.325,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "lr8341a-t36-etched.glb",+  "glb_sha256": "0c930f28f5e8d4d91c9a467af99ce8cea080480f59e2f0931487c85234ba7393",+  "footprint": "lr8341a-t36.kicad_mod",+  "footprint_sha256": "2a1965f25dd170a876bb343d2a7cba4e69eebb04950f884971d672fd6ead5748",+  "pins": "page.json component.pins",+  "pins_sha256": "601c51ad1b9d5eb62ee7da1fbc2677f8beb44ad9b116b38ac43e348be8b8acd5"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "VSS",+   "x": -1.95,+   "y": -0.95,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "VOUT",+   "x": -1.95,+   "y": 0.95,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "VIN",+   "x": 1.95,+   "y": 0.0,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -1.1375,+    -0.95+   ],+   "size_mm": [+    1.325,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -1.1375,+    0.95+   ],+   "size_mm": [+    1.325,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    1.1375,+    0.0+   ],+   "size_mm": [+    1.325,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
package.json+9−9
@@ -1,6 +1,6 @@ {   "slug": "lr8341a-t36",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "LR Linear Voltage Regulators (LDO), SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -52,7 +52,7 @@       "lcsc": "C5205216"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:45:17Z",+      "checked_at": "2026-11-12T05:45:16Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -68,19 +68,19 @@         "number": "1",         "name": "VSS",         "type": "power_in",-        "description": "Ground pin (labelled VSS in the SOT23-3L drawing and GND in the block diagram), the reference for all voltage values."+        "description": "Ground pin (labelled VSS in the pin drawing and GND in the block diagram), the reference for all voltage values."       },       {         "number": "2",         "name": "VOUT",         "type": "power_out",-        "description": "Regulated 3.6V output (±1% at VIN=VOUT+2V, IOUT=10mA) delivering up to 100mA, needs a 1-10uF output capacitor and is short-circuit limited to 15mA typical."+        "description": "Regulated 3.6V output (LR8341A-T36, ±2% tolerance) delivering 100mA, with short-circuit current limited to 15mA typ. and a recommended 1-10uF output capacitor."       },       {         "number": "3",         "name": "VIN",         "type": "power_in",-        "description": "Input supply pin accepting up to 40V (absolute maximum 55V), which needs a bypass capacitor close to the pin."+        "description": "Supply input accepting up to 40V operating (55V absolute maximum), with a bypass capacitor of 1-10uF recommended."       }     ],     "provenance": {@@ -94,12 +94,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet labels pin 1 as VSS in the package drawing and GND in the block diagram; both are trea",+          "extractor flagged: The pin drawing labels pin 1 as VSS while the block diagram labels it GND; they are treated as the s",           "vision extraction: provenance cannot be text-verified; needs consensus"         ],         "pages_sent": 13,-        "cost_usd": 0.0439,-        "at": "2026-11-12T04:45:10"+        "cost_usd": 0.1869,+        "at": "2026-11-12T05:44:45"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/bd7afbedf7cc4b3bd40059353a5754ae.pdf",@@ -154,7 +154,7 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "dcec56431f78011ba0b2546ffcf92c170c9896bd9e5729b26fa1f35c97254377",+        "sha256": "f6f2cceecdb8e0e8231a6185ab98a70b8d148080cf14ae31318c6dd60f84ad42",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }
page.json+21−18
@@ -4,7 +4,7 @@   "slug": "lr8341a-t36",   "title": "LR8341A-T36",   "brief": "LR Linear Voltage Regulators (LDO), SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -34,7 +34,7 @@       "lcsc": "C5205216"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:45:17Z",+      "checked_at": "2026-11-12T05:45:16Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -50,19 +50,19 @@         "number": "1",         "name": "VSS",         "type": "power_in",-        "description": "Ground pin (labelled VSS in the SOT23-3L drawing and GND in the block diagram), the reference for all voltage values."+        "description": "Ground pin (labelled VSS in the pin drawing and GND in the block diagram), the reference for all voltage values."       },       {         "number": "2",         "name": "VOUT",         "type": "power_out",-        "description": "Regulated 3.6V output (±1% at VIN=VOUT+2V, IOUT=10mA) delivering up to 100mA, needs a 1-10uF output capacitor and is short-circuit limited to 15mA typical."+        "description": "Regulated 3.6V output (LR8341A-T36, ±2% tolerance) delivering 100mA, with short-circuit current limited to 15mA typ. and a recommended 1-10uF output capacitor."       },       {         "number": "3",         "name": "VIN",         "type": "power_in",-        "description": "Input supply pin accepting up to 40V (absolute maximum 55V), which needs a bypass capacitor close to the pin."+        "description": "Supply input accepting up to 40V operating (55V absolute maximum), with a bypass capacitor of 1-10uF recommended."       }     ],     "provenance": {@@ -76,12 +76,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet labels pin 1 as VSS in the package drawing and GND in the block diagram; both are trea",+          "extractor flagged: The pin drawing labels pin 1 as VSS while the block diagram labels it GND; they are treated as the s",           "vision extraction: provenance cannot be text-verified; needs consensus"         ],         "pages_sent": 13,-        "cost_usd": 0.0439,-        "at": "2026-11-12T04:45:10"+        "cost_usd": 0.1869,+        "at": "2026-11-12T05:44:45"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/bd7afbedf7cc4b3bd40059353a5754ae.pdf",@@ -111,11 +111,11 @@         "seat": "z = 0",         "extents_mm": [           2.5,-          3.0,+          3,           1.2         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "16964b14f93e6c778288a0c110b35f670fab733109c26f0da7dfc07cc3350040",         "checked": "2026-11-12",@@ -130,13 +130,13 @@         "seat": "z = 0",         "extents_mm": [           2.5,-          3.0,+          3,           1.2         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "dcec56431f78011ba0b2546ffcf92c170c9896bd9e5729b26fa1f35c97254377",+        "sha256": "f6f2cceecdb8e0e8231a6185ab98a70b8d148080cf14ae31318c6dd60f84ad42",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }@@ -162,7 +162,7 @@         "nom_mm": 2.8,         "range_mm": [           2.6,-          3.0+          3         ]       },       "e": {@@ -493,5 +493,8 @@     "lr8341a-t36-hero.glb",     "lr8341a-t36-hero.overlay.json",     "lr8341a-t36-etched.glb"-  ]-}+  ],+  "description": "LR Linear Voltage Regulators (LDO), SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "visibility": "private",+  "org": "adom"+}\ No newline at end of file