← Commit history

lr8323b-t12: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·af5db1227a · ·parent 49b8c83
1 file changed +56−1
page.json+56−1
@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "LR8323B-T12",+    "manufacturer": "LR",+    "package": "SOT-23-5L",+    "pin_count": 5,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "lr8323b-t12.kicad_sym",+      "footprint": "lr8323b-t12.kicad_mod",+      "model_3d": "lr8323b-t12-etched.glb",+      "model_3d_plain": "lr8323b-t12.glb",+      "model_3d_step": "lr8323b-t12-etched.step",+      "model_3d_step_plain": "lr8323b-t12.step",+      "lbr": "lr8323b-t12.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Unregulated input supply. Absolute maximum 32V; recommended operating input up to 24V. Bypass to GND with at least 1uF ceramic capacitor (1uF-10uF typical); a small series resistor (~10Ω) is recommended to snub upstream spikes."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference. All voltages in the datasheet are referenced to GND. A large ground pour is recommended to improve noise immunity and thermal dissipation."+      },+      {+        "number": "3",+        "name": "CE",+        "type": "input",+        "description": "Chip Enable (active-high on/off control). Drive high to enable the regulator, low to shut down. In shutdown (VCE=0V) the leakage current ISHD is ±1uA typical. Must not be left floating."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to GND for mechanical stability; do not use as a routing via."+      },+      {+        "number": "5",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated output voltage. The -T12 suffix fixes VOUT = 1.2V (accuracy ±1%). Rated for 300mA continuous, protected at 450mA (OCP) and clamped to 20mA on hard short (SCP). Requires at least 1uF ceramic output capacitor for stability."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}