← Commit history
lr6207a-t15: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+56−1
page.json+56−1@@ -33,5 +33,60 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "LR6207A-T15",+ "manufacturer": "LR",+ "package": "SOT-23-5L",+ "pin_count": 5,+ "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "parts": {+ "symbol": "lr6207a-t15.kicad_sym",+ "footprint": "lr6207a-t15.kicad_mod",+ "model_3d": "lr6207a-t15-etched.glb",+ "model_3d_plain": "lr6207a-t15.glb",+ "model_3d_step": "lr6207a-t15-etched.step",+ "model_3d_step_plain": "lr6207a-t15.step",+ "lbr": "lr6207a-t15.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VIN",+ "type": "power_in",+ "description": "Regulator power input. Accepts up to 6.5V (absolute maximum 9V). Bypass with at least 1uF ceramic capacitor to VSS/GND close to the pin; when battery-powered a larger input cap may be required."+ },+ {+ "number": "2",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground / negative supply reference. All device voltages are referenced to VSS. Tie to system ground plane with a low-impedance connection."+ },+ {+ "number": "3",+ "name": "CE",+ "type": "input",+ "description": "Chip enable input (active high). Drive above VCE(min) = 0.7V (VIN = 2.2V, IOUT = 1mA) to enable the regulator; drive low to shut it down. Do not leave floating."+ },+ {+ "number": "4",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. May be left floating or tied to VSS for mechanical stability."+ },+ {+ "number": "5",+ "name": "VOUT",+ "type": "power_out",+ "description": "Regulated 1.5V output (±2%, VOUT*0.98 to VOUT*1.02 at VIN=VOUT+1V, IOUT=10mA). Rated for up to 300mA typical / 450mA absolute max. Bypass with at least 1uF ceramic capacitor to GND for stability and transient response; short-circuit protected (ISCP ≈ 25mA when VOUT < 0.7V)."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}