← Commit history

Initial commit: component/lpa4722aqvf

Ray ·bdea086f22 ·
2 files changed +90
README.mdadded+56
@@ -0,0 +1,56 @@+# LPA4722AQVF++**LOWPOWER** · Audio Power OpAmps · TQFN-16-EP(3x3)++LPA4722AQVF from LOWPOWER, in a TQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PVDD | power_in | Charge-pump power supply (2.5-5.5 V). Powers the charge-pump inverter, charge-pump logic, and oscillator. Bypass to PGND with a 1 µF capacitor placed as close to the pin as possible. |+| 2 | C1P | passive | Flying-capacitor positive terminal. Connect a 1 µF capacitor between C1P (pin 2) and C1N (pin 4) for the charge-pump inverter that generates the negative rail. |+| 3 | PGND | power_in | Power ground for the charge pump. Connect PGND and SGND together at the system ground plane. |+| 4 | C1N | passive | Flying-capacitor negative terminal. Paired with C1P via the 1 µF flying capacitor for the charge-pump inverter. |+| 5 | PVSS | power_out | Charge-pump output (negative supply rail generated internally). Decouple to PGND with a 1 µF capacitor. Also tied to BIAS externally to provide the amplifier's negative supply. |+| 6 | SGND | power_in | Signal ground for the amplifier section. Tie to PGND at the system ground plane to keep charge-pump return current out of the signal ground. |+| 7 | INR+ | input | Noninverting right-channel audio input. AC-coupled through CIN; input differential pair together with INR- sets the right channel gain (typ. −1 V/V with RIN = RF = 20 kΩ). |+| 8 | INR- | input | Inverting right-channel audio input. AC-coupled through CIN; forms the inverting side of the right-channel differential input. |+| 9 | SVDD | power_in | Amplifier positive power supply (2.5-5.5 V). Both SVDD pins (9 and 13) must be connected together to the positive supply. Bypass to SGND with a 1 µF capacitor placed as close to the pin as possible. |+| 10 | OUTR | output | Right-channel headphone output. Ground-referenced (DirectDrive) output, no DC-blocking capacitor required. Drives up to ~215 mW into 16 Ω. |+| 11 | BIAS | power_in | Amplifier negative power supply. Must be connected to PVSS (charge-pump output) to supply the amplifiers' negative rail and enable ground-referenced (DirectDrive) operation. |+| 12 | OUTL | output | Left-channel headphone output. Ground-referenced (DirectDrive) output, no DC-blocking capacitor required. Drives up to ~215 mW into 16 Ω. |+| 13 | SVDD | power_in | Amplifier positive power supply (2.5-5.5 V). Second SVDD bond pad; tie externally to pin 9 and to the positive supply. Bypass to SGND with a 1 µF capacitor as close to the pin as possible. |+| 14 | INL- | input | Inverting left-channel audio input. AC-coupled through CIN; forms the inverting side of the left-channel differential input. |+| 15 | INL+ | input | Noninverting left-channel audio input. AC-coupled through CIN; input differential pair together with INL- sets the left channel gain (typ. −1 V/V with RIN = RF = 20 kΩ). |+| 16 | SHDN | input | Active-low shutdown input. Drive low (VIL ≤ 0.6 V, tied to SGND/PGND) to enter shutdown (ISD ≈ 0.3 µA); drive high (VIH ≥ 1 V) for normal operation. Full operation is reached ~0.5 ms after release. |+| EP | EP | passive | Exposed thermal pad on package underside. Electrically connect to PGND for best thermal performance, or leave unconnected. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | LOWPOWER |+| Package | TQFN-16-EP(3x3) |+| Category | Op-amp/Cmp |+| Pins | 17 |++## Ordering variants++- `LPA4722AQVFQVF`++## CAD (KiCad official)++- Symbol: `LPA4722AQVF`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: TQFN-16-EP(3x3) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [LOWPOWER datasheet](docs/lpa4722aqvf-datasheet.pdf) (14 pp, sha256 `fc52aea35abab63b`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lpa4722aqvf-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lpa4722aqvf",+  "version": "0.1.0",+  "type": "component",+  "description": "LOWPOWER Audio Power OpAmps, TQFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "op-amp-cmp",+    "lpa4722aqvf"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lpa4722aqvf.kicad_sym",+    "lpa4722aqvf.kicad_mod",+    "lpa4722aqvf.glb",+    "lpa4722aqvf.step",+    "lpa4722aqvf.lbr",+    "docs/hero.png",+    "docs/lpa4722aqvf-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file