lpa2101spf

@@ -33,5 +33,83 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "LPA2101SPF",+    "manufacturer": "LOWPOWER",+    "package": "ESOP-8",+    "pin_count": 9,+    "category": "Audio Power OpAmps",+    "parts": {+      "symbol": "lpa2101spf.kicad_sym",+      "footprint": "lpa2101spf.kicad_mod",+      "model_3d": "lpa2101spf-etched.glb",+      "model_3d_step": "lpa2101spf-etched.step",+      "model_3d_step_plain": "lpa2101spf.step",+      "lbr": "lpa2101spf.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "SD",+        "type": "input",+        "description": "Shutdown pin, active low. Drive low to disable the amplifier bias circuitry and enter shutdown (Isd typ 12µA at 12V). VIH ≥ 1V, VIL ≤ 0.6V."+      },+      {+        "number": "2",+        "name": "MODE",+        "type": "input",+        "description": "Mode control pin selecting operating class. Class AB: 0-1V; Class D + AGC: 1.1-1.4V; Class D: > 1.5V."+      },+      {+        "number": "3",+        "name": "IN+",+        "type": "input",+        "description": "Positive (non-inverting) audio input of the amplifier. AC-coupled through Cin with Rin (typ 27kΩ) to set high-pass corner fc = 1/(2πRiCi)."+      },+      {+        "number": "4",+        "name": "IN-",+        "type": "input",+        "description": "Negative (inverting) audio input of the amplifier. AC-coupled through Cin with Rin (typ 27kΩ); tie to signal ground through Cin for single-ended input."+      },+      {+        "number": "5",+        "name": "VDD",+        "type": "power_in",+        "description": "Voltage supply pin. Operating range 4.3V to 15.5V (absolute max 18V). Decouple with a local 1µF ceramic close to the pin plus a bulk 470µF capacitor for the audio power path."+      },+      {+        "number": "6",+        "name": "OUT+",+        "type": "output",+        "description": "Positive Class-D/AB BTL output to the speaker. Filterless operation supported; may be filtered with a ferrite bead + 1nF or an LC (15µH + 2.2µF) reconstruction filter for EMI."+      },+      {+        "number": "7",+        "name": "OUT-",+        "type": "output",+        "description": "Negative Class-D/AB BTL output to the speaker. 180° out of phase with OUT+ to drive the load differentially."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Signal ground return for the device."+      },+      {+        "number": "9",+        "name": "Thermal PAD",+        "type": "power_in",+        "description": "Exposed thermal pad - Power Ground. Must be soldered to the PCB ground plane for proper thermal performance (θJA = 65°C/W) and reliability."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}