← Commit history

lp8861qpwprq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·66507165c5 · ·parent d287706
2 files changed +91−11
package.json+49−9
@@ -74,13 +74,13 @@         "number": "2",         "name": "LDO",         "type": "output",-        "description": "Internal LDO output (4.15-4.45 V typical) requiring 1 \u03bcF decoupling capacitor to ground."+        "description": "Internal LDO output (4.15-4.45 V typical) requiring 1 μF decoupling capacitor to ground."       },       {         "number": "3",         "name": "FSET",         "type": "input",-        "description": "Switching frequency setting pin with external resistor 24 k\u03a9 to 219 k\u03a9 connected to ground for 300 kHz to 2.2 MHz operation."+        "description": "Switching frequency setting pin with external resistor 24 kΩ to 219 kΩ connected to ground for 300 kHz to 2.2 MHz operation."       },       {         "number": "4",@@ -104,7 +104,7 @@         "number": "7",         "name": "PWM",         "type": "input",-        "description": "PWM brightness control input (100 Hz to 20 kHz recommended frequency range) with 0.5 \u03bcs minimum ON/OFF time."+        "description": "PWM brightness control input (100 Hz to 20 kHz recommended frequency range) with 0.5 μs minimum ON/OFF time."       },       {         "number": "8",@@ -122,7 +122,7 @@         "number": "10",         "name": "ISET",         "type": "input",-        "description": "LED output current setting pin with external resistor 24 k\u03a9 to 129 k\u03a9 connected to ground setting maximum 100 mA per channel."+        "description": "LED output current setting pin with external resistor 24 kΩ to 129 kΩ connected to ground setting maximum 100 mA per channel."       },       {         "number": "11",@@ -158,7 +158,7 @@         "number": "16",         "name": "FB",         "type": "input",-        "description": "Boost/SEPIC feedback voltage input connected to center tap of resistor divider (5 k\u03a9 to 150 k\u03a9 per resistor) between VOUT and ground."+        "description": "Boost/SEPIC feedback voltage input connected to center tap of resistor divider (5 kΩ to 150 kΩ per resistor) between VOUT and ground."       },       {         "number": "17",@@ -170,13 +170,13 @@         "number": "18",         "name": "SW",         "type": "output",-        "description": "Boost/SEPIC internal switch node (0 V to 50 V absolute maximum) with 2 A current limit typical (2.5 A warm-start) and 240-400 m\u03a9 RDSon."+        "description": "Boost/SEPIC internal switch node (0 V to 50 V absolute maximum) with 2 A current limit typical (2.5 A warm-start) and 240-400 mΩ RDSon."       },       {         "number": "19",         "name": "SD",         "type": "output",-        "description": "Power-line FET gate control output for external soft-start transistor (185-283 \u03bcA pulldown current); may be left floating if not used."+        "description": "Power-line FET gate control output for external soft-start transistor (185-283 μA pulldown current); may be left floating if not used."       },       {         "number": "20",@@ -223,6 +223,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lp8861qpwprq1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.41,+          6.5,+          1.2+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "27f33fd68e00e84db6e2d3d6eede884fb49e4b451dc5a93edb5ba10837fc2b22",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lp8861qpwprq1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.41,+          6.5,+          1.2+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "765341294281ed76293a801c2c23b013cb4a8d2a3cf5d6dad80388aeea774efc",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -209,7 +209,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lp8861qpwprq1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.41,+          6.5,+          1.2+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "27f33fd68e00e84db6e2d3d6eede884fb49e4b451dc5a93edb5ba10837fc2b22",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lp8861qpwprq1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.41,+          6.5,+          1.2+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "765341294281ed76293a801c2c23b013cb4a8d2a3cf5d6dad80388aeea774efc",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -256,4 +296,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}