← Commit history

Set visibility: public

Ray ·766710a20d · ·parent 5393512
1 file changed +8−5
page.json+8−5
@@ -62,13 +62,13 @@         "number": "6",         "name": "ISET",         "type": "input",-        "description": "Charge current programming pin. Resistor to GND sets IBAT (e.g. RISET=10K \u2192 100mA, RISET=2K \u2192 500mA). Leave open (NC) for default input current limit ~400uA."+        "description": "Charge current programming pin. Resistor to GND sets IBAT (e.g. RISET=10K → 100mA, RISET=2K → 500mA). Leave open (NC) for default input current limit ~400uA."       },       {         "number": "7",         "name": "NTC",         "type": "input",-        "description": "Battery temperature protection sense input. Connect to an NTC thermistor divider from VIN. High-temp threshold ~6%\u00b7VIN falling, low-temp threshold ~43%\u00b7VIN rising, ~20mV hysteresis."+        "description": "Battery temperature protection sense input. Connect to an NTC thermistor divider from VIN. High-temp threshold ~6%·VIN falling, low-temp threshold ~43%·VIN rising, ~20mV hysteresis."       },       {         "number": "8",@@ -86,7 +86,7 @@         "number": "10",         "name": "IEND2",         "type": "input",-        "description": "Discharge channel 2 end-of-discharge / no-load cut-off current setting pin. Resistor to GND programs the cutoff (RIEND=20K \u2192 10mA, RIEND=10K \u2192 20mA). tEND \u2248 16s of sub-threshold load before cutoff."+        "description": "Discharge channel 2 end-of-discharge / no-load cut-off current setting pin. Resistor to GND programs the cutoff (RIEND=20K → 10mA, RIEND=10K → 20mA). tEND ≈ 16s of sub-threshold load before cutoff."       },       {         "number": "11",@@ -98,7 +98,7 @@         "number": "12",         "name": "EN",         "type": "input",-        "description": "Enable / shutdown control for the boost output. High (VEN_H \u2265 1.4V) enables output; low (VEN_L \u2264 0.4V) disables it. Marked 'SD' on the top-view pinout drawing but described as EN in the pin-function table."+        "description": "Enable / shutdown control for the boost output. High (VEN_H ≥ 1.4V) enables output; low (VEN_L ≤ 0.4V) disables it. Marked 'SD' on the top-view pinout drawing but described as EN in the pin-function table."       },       {         "number": "13",@@ -186,5 +186,8 @@     "docs/lp7802asof-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file