← Commit history

lp7802asof: factory component page (tier=lcsc)

Ray ·414d4d917e · ·parent e3f095b
1 file changed +164−8
page.json+164−8
@@ -1,13 +1,174 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "lp7802asof",+  "title": "LP7802ASOF",+  "brief": "LOWPOWER Battery Management, SSOP-16-150mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "LOWPOWER Battery Management, SSOP-16-150mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "lp7802asof"   ],+  "component": {+    "mpn": "LP7802ASOF",+    "manufacturer": "LOWPOWER",+    "package": "SSOP-16-150mil",+    "pin_count": 16,+    "category": "PMIC",+    "subcategory": "Battery Management",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/1d7a6508cdc3d4e34f273c9ed6d766b7.pdf",+    "parts": {+      "symbol": "lp7802asof.kicad_sym",+      "footprint": "lp7802asof.kicad_mod",+      "model_3d": "lp7802asof.glb",+      "model_3d_step": "lp7802asof.step",+      "lbr": "lp7802asof.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground return. Tie to system ground; also connected to pin 5."+      },+      {+        "number": "2",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection. Leave floating (per application schematic pin 2 is not connected)."+      },+      {+        "number": "3",+        "name": "BAT",+        "type": "power_out",+        "description": "Battery pin. Internally connects the charger output and the boost converter (discharge) input. Bypass with ~10uF to GND. Typical float voltage 4.2V."+      },+      {+        "number": "4",+        "name": "VIN",+        "type": "power_in",+        "description": "Charger input supply. Operating range 4.5V to 6V; absolute max 30V. OVP threshold ~6.5V. Bypass with 1uF to GND."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Ground return (second GND pin, tied internally to pin 1)."+      },+      {+        "number": "6",+        "name": "ISET",+        "type": "input",+        "description": "Charge current programming pin. Resistor to GND sets IBAT (e.g. RISET=10K \u2192 100mA, RISET=2K \u2192 500mA). Leave open (NC) for default input current limit ~400uA."+      },+      {+        "number": "7",+        "name": "NTC",+        "type": "input",+        "description": "Battery temperature protection sense input. Connect to an NTC thermistor divider from VIN. High-temp threshold ~6%\u00b7VIN falling, low-temp threshold ~43%\u00b7VIN rising, ~20mV hysteresis."+      },+      {+        "number": "8",+        "name": "LED2",+        "type": "output",+        "description": "Discharge status indicator LED drive (open-drain / current source, typical ILED = 3mA). Drives an LED to ground with series limit as needed."+      },+      {+        "number": "9",+        "name": "LED1",+        "type": "output",+        "description": "Charge status indicator LED drive (typical ILED = 3mA)."+      },+      {+        "number": "10",+        "name": "IEND2",+        "type": "input",+        "description": "Discharge channel 2 end-of-discharge / no-load cut-off current setting pin. Resistor to GND programs the cutoff (RIEND=20K \u2192 10mA, RIEND=10K \u2192 20mA). tEND \u2248 16s of sub-threshold load before cutoff."+      },+      {+        "number": "11",+        "name": "IEND1",+        "type": "input",+        "description": "Discharge channel 1 end-of-discharge / no-load cut-off current setting pin. Same programming as IEND2."+      },+      {+        "number": "12",+        "name": "EN",+        "type": "input",+        "description": "Enable / shutdown control for the boost output. High (VEN_H \u2265 1.4V) enables output; low (VEN_L \u2264 0.4V) disables it. Marked 'SD' on the top-view pinout drawing but described as EN in the pin-function table."+      },+      {+        "number": "13",+        "name": "OUT1",+        "type": "power_out",+        "description": "Discharge output channel 1 (from the 5V boost, up to 500mA). Bypass with 1uF to GND."+      },+      {+        "number": "14",+        "name": "OUT2",+        "type": "power_out",+        "description": "Discharge output channel 2 (from the 5V boost, up to 500mA). Bypass with 1uF to GND."+      },+      {+        "number": "15",+        "name": "PMID",+        "type": "power_out",+        "description": "Boost converter output rail (~5V typical). Requires ~10uF bypass capacitor to GND."+      },+      {+        "number": "16",+        "name": "LX",+        "type": "power_out",+        "description": "Boost converter switching node. Connect a 4.7uH inductor from LX to BAT. Absolute max -0.3V to 12V; 1MHz switching frequency."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://datasheet.lcsc.com/datasheet/pdf/1d7a6508cdc3d4e34f273c9ed6d766b7.pdf",+        "pages": 8,+        "sha256": "73fbbbbfc8b1c68c",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "LOWPOWER",+      "Package": "SSOP-16-150mil",+      "Category": "PMIC",+      "Pins": "16"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "lp7802asof"+  ],+  "discovery_pitch": "LP7802ASOF (LOWPOWER) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +186,5 @@     "docs/lp7802asof-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file