← Commit history
README.mdadded+56@@ -0,0 +1,56 @@+# LP7802ASOF++**LOWPOWER** · Battery Management · SSOP-16-150mil++LP7802ASOF from LOWPOWER, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground return. Tie to system ground; also connected to pin 5. |+| 2 | NC | unconnected | No connection. Leave floating (per application schematic pin 2 is not connected). |+| 3 | BAT | power_out | Battery pin. Internally connects the charger output and the boost converter (discharge) input. Bypass with ~10uF to GND. Typical float voltage 4.2V. |+| 4 | VIN | power_in | Charger input supply. Operating range 4.5V to 6V; absolute max 30V. OVP threshold ~6.5V. Bypass with 1uF to GND. |+| 5 | GND | power_in | Ground return (second GND pin, tied internally to pin 1). |+| 6 | ISET | input | Charge current programming pin. Resistor to GND sets IBAT (e.g. RISET=10K → 100mA, RISET=2K → 500mA). Leave open (NC) for default input current limit ~400uA. |+| 7 | NTC | input | Battery temperature protection sense input. Connect to an NTC thermistor divider from VIN. High-temp threshold ~6%·VIN falling, low-temp threshold ~43%·VIN rising, ~20mV hysteresis. |+| 8 | LED2 | output | Discharge status indicator LED drive (open-drain / current source, typical ILED = 3mA). Drives an LED to ground with series limit as needed. |+| 9 | LED1 | output | Charge status indicator LED drive (typical ILED = 3mA). |+| 10 | IEND2 | input | Discharge channel 2 end-of-discharge / no-load cut-off current setting pin. Resistor to GND programs the cutoff (RIEND=20K → 10mA, RIEND=10K → 20mA). tEND ≈ 16s of sub-threshold load before cutoff. |+| 11 | IEND1 | input | Discharge channel 1 end-of-discharge / no-load cut-off current setting pin. Same programming as IEND2. |+| 12 | EN | input | Enable / shutdown control for the boost output. High (VEN_H ≥ 1.4V) enables output; low (VEN_L ≤ 0.4V) disables it. Marked 'SD' on the top-view pinout drawing but described as EN in the pin-function table. |+| 13 | OUT1 | power_out | Discharge output channel 1 (from the 5V boost, up to 500mA). Bypass with 1uF to GND. |+| 14 | OUT2 | power_out | Discharge output channel 2 (from the 5V boost, up to 500mA). Bypass with 1uF to GND. |+| 15 | PMID | power_out | Boost converter output rail (~5V typical). Requires ~10uF bypass capacitor to GND. |+| 16 | LX | power_out | Boost converter switching node. Connect a 4.7uH inductor from LX to BAT. Absolute max -0.3V to 12V; 1MHz switching frequency. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | LOWPOWER |+| Package | SSOP-16-150mil |+| Category | PMIC |+| Pins | 16 |++## Ordering variants++- `LP7802ASOF`++## CAD (KiCad official)++- Symbol: `LP7802ASOF`+- Footprint: `Package_SO:SSOP-16_5.3x6.2mm_P0.65mm`+- 3D model: SSOP-16-150mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [LOWPOWER datasheet](docs/lp7802asof-datasheet.pdf) (8 pp, sha256 `73fbbbbfc8b1c68c`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lp7802asof-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "lp7802asof",+ "version": "0.1.0",+ "type": "component",+ "description": "LOWPOWER Battery Management, SSOP-16-150mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "lp7802asof"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lp7802asof.kicad_sym",+ "lp7802asof.kicad_mod",+ "lp7802asof.glb",+ "lp7802asof.step",+ "lp7802asof.lbr",+ "docs/hero.png",+ "docs/lp7802asof-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}