← Commit history
lp6225b6f: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+62−1
page.json+62−1@@ -33,5 +33,66 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "LP6225B6F",+ "manufacturer": "LOWPOWER",+ "package": "SOT-23-6",+ "pin_count": 6,+ "category": "DC-DC Converters",+ "parts": {+ "symbol": "lp6225b6f.kicad_sym",+ "footprint": "lp6225b6f.kicad_mod",+ "model_3d": "lp6225b6f-etched.glb",+ "model_3d_plain": "lp6225b6f.glb",+ "model_3d_step": "lp6225b6f-etched.step",+ "model_3d_step_plain": "lp6225b6f.step",+ "lbr": "lp6225b6f.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "SW",+ "type": "output",+ "description": "Power switch output. SW is the drain of the internal low-side power MOSFET (RDS(on) ≈ 80 mΩ). Connect the boost inductor and the anode of the output rectifier Schottky diode to this pin. Absolute maximum SW voltage is -0.3 V to 25 V."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground. Return for the internal low-side power MOSFET source, control logic, and reference. Should be tied to the system ground plane with a low-impedance path close to the input bypass capacitor."+ },+ {+ "number": "3",+ "name": "FB",+ "type": "input",+ "description": "Output voltage feedback input. Connect an external resistor divider from VOUT to FB (with the lower leg to GND) to program the output voltage: VOUT = (R1/R2 + 1) × VREF, where VREF is 0.6 V typical (0.588 V min, 0.612 V max). Keep R2 ≤ 200 kΩ for noise immunity. Absolute maximum FB voltage is -0.3 V to 9 V."+ },+ {+ "number": "4",+ "name": "EN",+ "type": "input",+ "description": "Regulator ON/OFF logic control input. A logic-high level (VEN > 1.4 V) enables the converter; a logic-low level (VEN < 0.4 V) forces the LP6225 into low-current shutdown mode (ISD ≈ 0.1 µA at VEN = 0 V). Absolute maximum EN voltage is -0.3 V to 18 V. Do not float."+ },+ {+ "number": "5",+ "name": "IN",+ "type": "power_in",+ "description": "Input power supply. Operating input voltage range is 2.5 V to 15 V (absolute maximum -0.3 V to 18 V). Place a low-ESR ceramic bypass capacitor (≈ 20 µF recommended) as close as possible to this pin and GND."+ },+ {+ "number": "6",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to a non-critical net. Do not use as an electrical tie point."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}