← Commit history
page.json+8−5@@ -62,25 +62,25 @@ "number": "6", "name": "ISET", "type": "input",- "description": "Peak switch current programming input. A resistor R3 between ISET and GND (10 k\u03a9 to 96 k\u03a9) sets the cycle-by-cycle current limit from 4.8 A down to 0.5 A per IOCP = 48000 / R3. Keep trace short; do not add capacitance on this pin."+ "description": "Peak switch current programming input. A resistor R3 between ISET and GND (10 kΩ to 96 kΩ) sets the cycle-by-cycle current limit from 4.8 A down to 0.5 A per IOCP = 48000 / R3. Keep trace short; do not add capacitance on this pin." }, { "number": "7", "name": "VIN", "type": "power_in",- "description": "Input supply. Operating range 2.5 V to 5.5 V (6 V absolute max). Bypass with a 22 \u03bcF low-ESR ceramic capacitor to GND placed close to the pin."+ "description": "Input supply. Operating range 2.5 V to 5.5 V (6 V absolute max). Bypass with a 22 μF low-ESR ceramic capacitor to GND placed close to the pin." }, { "number": "8", "name": "EN", "type": "input",- "description": "Enable/shutdown control input. VEN > 1.4 V enables the regulator; VEN < 0.4 V forces low-current shutdown (<1 \u03bcA). Do not leave floating."+ "description": "Enable/shutdown control input. VEN > 1.4 V enables the regulator; VEN < 0.4 V forces low-current shutdown (<1 μA). Do not leave floating." }, { "number": "9", "name": "GND", "type": "power_in",- "description": "Exposed thermal pad on the ESOP-8 underside. Must be soldered to the ground plane for thermal dissipation (\u03b8JA \u2248 50 \u00b0C/W); electrically tied to GND (pins 1 and 5)."+ "description": "Exposed thermal pad on the ESOP-8 underside. Must be soldered to the ground plane for thermal dissipation (θJA ≈ 50 °C/W); electrically tied to GND (pins 1 and 5)." } ], "provenance": {@@ -144,5 +144,8 @@ "docs/lp6222spf-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }