← Commit history

lp4076hspf-435: factory component page (tier=lcsc)

Ray ·a7372eda5a · ·parent bacd65d
1 file changed +122−8
page.json+122−8
@@ -1,13 +1,132 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "lp4076hspf-435",+  "title": "LP4076HSPF-435",+  "brief": "LOWPOWER Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "LOWPOWER Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "lp4076hspf-435"   ],+  "component": {+    "mpn": "LP4076HSPF-435",+    "manufacturer": "LOWPOWER",+    "package": "ESOP-8",+    "pin_count": 9,+    "category": "PMIC",+    "subcategory": "Battery Management",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2108271830_LOWPOWER-LP4076HSPF-435_C2890370.pdf",+    "parts": {+      "symbol": "lp4076hspf-435.kicad_sym",+      "footprint": "lp4076hspf-435.kicad_mod",+      "model_3d": "lp4076hspf-435.glb",+      "model_3d_step": "lp4076hspf-435.step",+      "lbr": "lp4076hspf-435.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "TS",+        "type": "input",+        "description": "Battery temperature-detection input. Sensed against an internal resistor divider with thresholds at 60%VIN (cold) and 30%VIN (hot). Tie to GND or hold below 0.3V (VTS_DIS) to disable the TS function."+      },+      {+        "number": "2",+        "name": "ISET",+        "type": "passive",+        "description": "Charge-current program pin. Connect a 1% resistor RISET from ISET to GND; IBAT = 1700 x VISET / RISET (VISET typ 1V). Also used internally for termination detection when the pin voltage falls below 100mV."+      },+      {+        "number": "3",+        "name": "GND",+        "type": "power_in",+        "description": "System ground. Must be tied together with pin 9 (exposed pad) to the board ground plane."+      },+      {+        "number": "4",+        "name": "IN",+        "type": "power_in",+        "description": "Input power supply from a wall adapter. Operating range 4.5V-6V typ; absolute maximum 28V with internal OVP disabling the charger above ~7V (VOVP). UVLO rising threshold 3.5V."+      },+      {+        "number": "5",+        "name": "BAT",+        "type": "power_out",+        "description": "Battery connection and charger output. Regulated float voltage 4.35V (LP4076HSPF-435). Requires a 1uF ceramic cap with a battery attached, or a 10uF tantalum cap for stability when no battery is present. Absolute maximum -5V to 15V."+      },+      {+        "number": "6",+        "name": "FULL",+        "type": "output",+        "description": "Open-drain charge-status output. High-Z (external pull-up to VCC) while charging; pulled low by internal N-MOS when the charge cycle completes. VOL <= 0.5V at 5mA."+      },+      {+        "number": "7",+        "name": "CHRG",+        "type": "output",+        "description": "Open-drain charge-status output. Pulled low by internal N-MOS while charging; goes high-impedance (external pull-up to VCC) when the charge cycle completes. VOL <= 0.5V at 5mA."+      },+      {+        "number": "8",+        "name": "EN",+        "type": "input",+        "description": "Charge enable input, active high. VIH >= 1.4V, VIL <= 0.4V. Drive high to enable charging, low to shut down."+      },+      {+        "number": "9",+        "name": "GND",+        "type": "power_in",+        "description": "Exposed thermal pad on the bottom of the ESOP-8. Electrically connected to GND; must be soldered to the board ground plane for proper thermal performance and low-impedance ground."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2108271830_LOWPOWER-LP4076HSPF-435_C2890370.pdf",+        "pages": 9,+        "sha256": "6a7c9b070a7052a8",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 9,+        "described": 9,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "LOWPOWER",+      "Package": "ESOP-8",+      "Category": "PMIC",+      "Pins": "9"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "lp4076hspf-435"+  ],+  "discovery_pitch": "LP4076HSPF-435 (LOWPOWER) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +144,5 @@     "docs/lp4076hspf-435-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file