← Commit history

Initial commit: component/lp4076hspf-435

Ray ·4c300a7fd8 ·
2 files changed +82
README.mdadded+48
@@ -0,0 +1,48 @@+# LP4076HSPF-435++**LOWPOWER** · Battery Management · ESOP-8++LP4076HSPF-435 from LOWPOWER, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TS | input | Battery temperature-detection input. Sensed against an internal resistor divider with thresholds at 60%VIN (cold) and 30%VIN (hot). Tie to GND or hold below 0.3V (VTS_DIS) to disable the TS function. |+| 2 | ISET | passive | Charge-current program pin. Connect a 1% resistor RISET from ISET to GND; IBAT = 1700 x VISET / RISET (VISET typ 1V). Also used internally for termination detection when the pin voltage falls below 100mV. |+| 3 | GND | power_in | System ground. Must be tied together with pin 9 (exposed pad) to the board ground plane. |+| 4 | IN | power_in | Input power supply from a wall adapter. Operating range 4.5V-6V typ; absolute maximum 28V with internal OVP disabling the charger above ~7V (VOVP). UVLO rising threshold 3.5V. |+| 5 | BAT | power_out | Battery connection and charger output. Regulated float voltage 4.35V (LP4076HSPF-435). Requires a 1uF ceramic cap with a battery attached, or a 10uF tantalum cap for stability when no battery is present. Absolute maximum -5V to 15V. |+| 6 | FULL | output | Open-drain charge-status output. High-Z (external pull-up to VCC) while charging; pulled low by internal N-MOS when the charge cycle completes. VOL <= 0.5V at 5mA. |+| 7 | CHRG | output | Open-drain charge-status output. Pulled low by internal N-MOS while charging; goes high-impedance (external pull-up to VCC) when the charge cycle completes. VOL <= 0.5V at 5mA. |+| 8 | EN | input | Charge enable input, active high. VIH >= 1.4V, VIL <= 0.4V. Drive high to enable charging, low to shut down. |+| 9 | GND | power_in | Exposed thermal pad on the bottom of the ESOP-8. Electrically connected to GND; must be soldered to the board ground plane for proper thermal performance and low-impedance ground. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | LOWPOWER |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 9 |++## Ordering variants++- `LP4076HSPF-435`++## CAD (KiCad official)++- Symbol: `LP4076HSPF-435`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [LOWPOWER datasheet](docs/lp4076hspf-435-datasheet.pdf) (9 pp, sha256 `6a7c9b070a7052a8`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lp4076hspf-435-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lp4076hspf-435",+  "version": "0.1.0",+  "type": "component",+  "description": "LOWPOWER Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "lp4076hspf-435"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lp4076hspf-435.kicad_sym",+    "lp4076hspf-435.kicad_mod",+    "lp4076hspf-435.glb",+    "lp4076hspf-435.step",+    "lp4076hspf-435.lbr",+    "docs/hero.png",+    "docs/lp4076hspf-435-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file