← Commit history

lp3984-12b5f: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·41337791a7 · ·parent 162d024
1 file changed +56−1
page.json+56−1
@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "LP3984-12B5F",+    "manufacturer": "LOWPOWER",+    "package": "SOT-23-5",+    "pin_count": 5,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "lp3984-12b5f.kicad_sym",+      "footprint": "lp3984-12b5f.kicad_mod",+      "model_3d": "lp3984-12b5f-etched.glb",+      "model_3d_plain": "lp3984-12b5f.glb",+      "model_3d_step": "lp3984-12b5f-etched.step",+      "model_3d_step_plain": "lp3984-12b5f.step",+      "lbr": "lp3984-12b5f.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Power input voltage. Recommended operating range 2.5V to 5.5V (absolute max 6.5V). Requires >=1uF input capacitor placed within 0.5 inch of the pin."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference. Return path for both input and output decoupling capacitors; should be tied to a clean analog ground."+      },+      {+        "number": "3",+        "name": "EN",+        "type": "input",+        "description": "Chip enable, active high with TTL-logic thresholds (VIH >= 1.4V to enable, VIL <= 0.4V to shut down). EN input bias current ~1uA at VEN=3V. Tie to VIN if the enable function is not needed for always-on operation."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. May be left floating or tied to ground; must not exceed -0.3V to VIN+0.3V per the Other Pin Voltage absolute maximum rating."+      },+      {+        "number": "5",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated output voltage. Fixed 1.2V nominal (-12 option) with +/-2% accuracy, up to 300mA load current and 500mA current limit. Requires >=1uF low-ESR ceramic output capacitor (ESR up to ~25mOhm) placed within 0.5 inch of the pin for stability."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}