component
LP3921SQE
Public Made by Adomby adom
Texas Instruments Battery Management, WQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+69@@ -0,0 +1,69 @@+# LP3921SQE++**Texas Instruments** · Battery Management · WQFN-32-EP(5x5)++LP3921SQE from Texas Instruments, in a WQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | LDO6 | power_out | LDO6 Output for TX with 150 mA capability and programmable voltage. |+| 2 | TX_EN | input | Enable control for LDO6 (TX), HIGH to enable or LOW to disable. |+| 3 | LDO5 | power_out | LDO5 Output for RX with 150 mA capability and programmable voltage. |+| 4 | VIN2 | power_in | Battery input for LDO3 through LDO7 with operating range 3.0V to 5.5V. |+| 5 | LDO7 | power_out | LDO7 Output for GP with 150 mA capability and programmable voltage. |+| 6 | OUT+ | output | Differential amplifier positive output capable of driving capacitive loads up to 100 pF. |+| 7 | VDD | power_in | DC power input for audio amplifier with operating range 3.0V to 5.5V. |+| 8 | OUT- | output | Differential amplifier negative output capable of driving capacitive loads up to 100 pF. |+| 9 | IN+ | input | Differential amplifier positive input. |+| 10 | IN- | input | Differential amplifier negative input. |+| 11 | GND | power_in | Analog ground connection. |+| 12 | BYPASS | passive | External bypass capacitor connection for amplifier stabilization. |+| 13 | LDO4 | power_out | LDO4 Output for TCXO with 80 mA capability and programmable voltage. |+| 14 | LDO3 | power_out | LDO3 Output for ANA with 80 mA capability and programmable voltage. |+| 15 | LDO2 | power_out | LDO2 Output for DIGI with 300 mA capability, default 3.0V, and programmable voltage. |+| 16 | LDO1 | power_out | LDO1 Output for CORE with 300 mA capability, default 1.8V, and programmable voltage. |+| 17 | VIN1 | power_in | Battery input for LDO1 and LDO2 with operating range 3.0V to 5.5V. |+| 18 | GNDA | power_in | Analog ground connection. |+| 19 | SDA | bidirectional | I2C serial interface data line with open-drain output requiring 1.5 kΩ external pull-up resistor. |+| 20 | SCL | input | I2C serial interface clock input requiring 1.5 kΩ external pull-up resistor. |+| 21 | BATT | power_in | Main battery connection for current delivery with operating range 3.0V to 5.5V. |+| 22 | CHG_IN | power_in | DC power input for charger from wall or car adapter with operating range 4.5V to 6.0V. |+| 23 | PWR_ON | input | Power-up sequence trigger input, active HIGH with internal 500 kΩ pull-down resistor. |+| 24 | IMON | output | Charge current monitor analog output with voltage relationship VIMON (mV) = 2.47 × ICHG (mA). |+| 25 | PS_HOLD | input | Power control input for external processor or controller. |+| 26 | TCXO_EN | input | Enable control for LDO4 (TCXO), HIGH to enable or LOW to disable. |+| 27 | HF_PWR | input | Power-up sequence trigger input, active HIGH with internal 500 kΩ pull-down resistor. |+| 28 | VSS | power_in | Digital ground connection. |+| 29 | PON_N | output | Active-low power-on signal, inverted version of PWR_ON input. |+| 30 | RESET_N | output | Reset output stays LOW during power-up sequence, asserted HIGH 60 ms after LDO1 reaches stable regulation. |+| 31 | ACOK_N | output | AC adapter presence indicator, active LOW when 4.5V to 6.0V detected at CHG_IN. |+| 32 | RX_EN | input | Enable control for LDO5 (RX), HIGH to enable or LOW to disable. |+| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-32-EP(5x5) |+| Category | Power Management (PMIC) |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `LP3921SQE`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: WQFN-32-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `lp3921sqe-etched.step` / `lp3921sqe-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp3921sqe.step` / `lp3921sqe.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lp3921) (44 pp, sha256 `c080356012c2b08f`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lp3921sqe-datasheet.pdf)
page.jsonadded+305@@ -0,0 +1,305 @@+{+ "slug": "lp3921sqe",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Battery Management, WQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lp3921sqe",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lp3921sqe.kicad_sym",+ "lp3921sqe.kicad_mod",+ "lp3921sqe.glb",+ "lp3921sqe.step",+ "lp3921sqe.lbr",+ "docs/hero.png",+ "docs/lp3921sqe-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LP3921SQE",+ "manufacturer": "Texas Instruments",+ "package": "WQFN-32-EP(5x5)",+ "pin_count": 33,+ "category": "Power Management (PMIC)",+ "subcategory": "Battery Management",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lp3921",+ "parts": {+ "symbol": "lp3921sqe.kicad_sym",+ "footprint": "lp3921sqe.kicad_mod",+ "model_3d": "lp3921sqe-etched.glb",+ "model_3d_plain": "lp3921sqe.glb",+ "model_3d_step": "lp3921sqe-etched.step",+ "model_3d_step_plain": "lp3921sqe.step",+ "lbr": "lp3921sqe.lbr"+ },+ "distributor_links": {+ "lcsc": "C2860870"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T01:25:16Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "LDO6",+ "type": "power_out",+ "description": "LDO6 Output for TX with 150 mA capability and programmable voltage."+ },+ {+ "number": "2",+ "name": "TX_EN",+ "type": "input",+ "description": "Enable control for LDO6 (TX), HIGH to enable or LOW to disable."+ },+ {+ "number": "3",+ "name": "LDO5",+ "type": "power_out",+ "description": "LDO5 Output for RX with 150 mA capability and programmable voltage."+ },+ {+ "number": "4",+ "name": "VIN2",+ "type": "power_in",+ "description": "Battery input for LDO3 through LDO7 with operating range 3.0V to 5.5V."+ },+ {+ "number": "5",+ "name": "LDO7",+ "type": "power_out",+ "description": "LDO7 Output for GP with 150 mA capability and programmable voltage."+ },+ {+ "number": "6",+ "name": "OUT+",+ "type": "output",+ "description": "Differential amplifier positive output capable of driving capacitive loads up to 100 pF."+ },+ {+ "number": "7",+ "name": "VDD",+ "type": "power_in",+ "description": "DC power input for audio amplifier with operating range 3.0V to 5.5V."+ },+ {+ "number": "8",+ "name": "OUT-",+ "type": "output",+ "description": "Differential amplifier negative output capable of driving capacitive loads up to 100 pF."+ },+ {+ "number": "9",+ "name": "IN+",+ "type": "input",+ "description": "Differential amplifier positive input."+ },+ {+ "number": "10",+ "name": "IN-",+ "type": "input",+ "description": "Differential amplifier negative input."+ },+ {+ "number": "11",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground connection."+ },+ {+ "number": "12",+ "name": "BYPASS",+ "type": "passive",+ "description": "External bypass capacitor connection for amplifier stabilization."+ },+ {+ "number": "13",+ "name": "LDO4",+ "type": "power_out",+ "description": "LDO4 Output for TCXO with 80 mA capability and programmable voltage."+ },+ {+ "number": "14",+ "name": "LDO3",+ "type": "power_out",+ "description": "LDO3 Output for ANA with 80 mA capability and programmable voltage."+ },+ {+ "number": "15",+ "name": "LDO2",+ "type": "power_out",+ "description": "LDO2 Output for DIGI with 300 mA capability, default 3.0V, and programmable voltage."+ },+ {+ "number": "16",+ "name": "LDO1",+ "type": "power_out",+ "description": "LDO1 Output for CORE with 300 mA capability, default 1.8V, and programmable voltage."+ },+ {+ "number": "17",+ "name": "VIN1",+ "type": "power_in",+ "description": "Battery input for LDO1 and LDO2 with operating range 3.0V to 5.5V."+ },+ {+ "number": "18",+ "name": "GNDA",+ "type": "power_in",+ "description": "Analog ground connection."+ },+ {+ "number": "19",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C serial interface data line with open-drain output requiring 1.5 kΩ external pull-up resistor."+ },+ {+ "number": "20",+ "name": "SCL",+ "type": "input",+ "description": "I2C serial interface clock input requiring 1.5 kΩ external pull-up resistor."+ },+ {+ "number": "21",+ "name": "BATT",+ "type": "power_in",+ "description": "Main battery connection for current delivery with operating range 3.0V to 5.5V."+ },+ {+ "number": "22",+ "name": "CHG_IN",+ "type": "power_in",+ "description": "DC power input for charger from wall or car adapter with operating range 4.5V to 6.0V."+ },+ {+ "number": "23",+ "name": "PWR_ON",+ "type": "input",+ "description": "Power-up sequence trigger input, active HIGH with internal 500 kΩ pull-down resistor."+ },+ {+ "number": "24",+ "name": "IMON",+ "type": "output",+ "description": "Charge current monitor analog output with voltage relationship VIMON (mV) = 2.47 × ICHG (mA)."+ },+ {+ "number": "25",+ "name": "PS_HOLD",+ "type": "input",+ "description": "Power control input for external processor or controller."+ },+ {+ "number": "26",+ "name": "TCXO_EN",+ "type": "input",+ "description": "Enable control for LDO4 (TCXO), HIGH to enable or LOW to disable."+ },+ {+ "number": "27",+ "name": "HF_PWR",+ "type": "input",+ "description": "Power-up sequence trigger input, active HIGH with internal 500 kΩ pull-down resistor."+ },+ {+ "number": "28",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground connection."+ },+ {+ "number": "29",+ "name": "PON_N",+ "type": "output",+ "description": "Active-low power-on signal, inverted version of PWR_ON input."+ },+ {+ "number": "30",+ "name": "RESET_N",+ "type": "output",+ "description": "Reset output stays LOW during power-up sequence, asserted HIGH 60 ms after LDO1 reaches stable regulation."+ },+ {+ "number": "31",+ "name": "ACOK_N",+ "type": "output",+ "description": "AC adapter presence indicator, active LOW when 4.5V to 6.0V detected at CHG_IN."+ },+ {+ "number": "32",+ "name": "RX_EN",+ "type": "input",+ "description": "Enable control for LDO5 (RX), HIGH to enable or LOW to disable."+ },+ {+ "number": "33",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 33 added from the footprint"+ ],+ "pages_sent": 8,+ "cost_usd": 0.14,+ "at": "2026-10-01T01:24:48"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lp3921",+ "pages": 44,+ "sha256": "c080356012c2b08f",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 33,+ "described": 33,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}