← Commit history
Publish 0.1.1
4 files changed
+589−11
lp339dr-hero.glbadded⋯ 1 unchanged line ⋯
lp339dr-hero.overlay.jsonadded+392@@ -0,0 +1,392 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LP339DR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 14,+ "span_mm": 8.22,+ "dash_mm": 0.2055,+ "gap_mm": 0.1233,+ "pad_stroke_mm": 0.0493+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 14,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.658,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -4.015,+ 4.015+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -4.11,+ 4.11+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "lp339dr-etched.glb",+ "glb_sha256": "ba2d3a8fda747bdb67326414596df413a238089a30ffc0121fbf98be4ac744db",+ "footprint": "lp339dr.kicad_mod",+ "footprint_sha256": "a885b619b22880c9559522d2bf865b059d80453b95a98defc9e6ceef284da1fc",+ "pins": "page.json component.pins",+ "pins_sha256": "81d41290a208546d9f8ca33b770b4b5700dccab749f195048cadd52c1331176c"+ },+ "generator": "adom-wiki 1.8.31 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "1OUT",+ "x": -3.6,+ "y": -3.81,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "2OUT",+ "x": -3.6,+ "y": -2.54,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "V+",+ "x": -3.6,+ "y": -1.27,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "2IN-",+ "x": -3.6,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "2IN+",+ "x": -3.6,+ "y": 1.27,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "1IN-",+ "x": -3.6,+ "y": 2.54,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "1IN+",+ "x": -3.6,+ "y": 3.81,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "3IN+",+ "x": 3.6,+ "y": 3.81,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "9",+ "text": "3IN-",+ "x": 3.6,+ "y": 2.54,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "10",+ "text": "4IN+",+ "x": 3.6,+ "y": 1.27,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "11",+ "text": "4IN-",+ "x": 3.6,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "12",+ "text": "GND",+ "x": 3.6,+ "y": -1.27,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "13",+ "text": "4OUT",+ "x": 3.6,+ "y": -2.54,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "14",+ "text": "3OUT",+ "x": 3.6,+ "y": -3.81,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -3.81+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -2.54+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -1.27+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 0.0+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 1.27+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 2.54+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 3.81+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 3.81+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 2.54+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 1.27+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 0.0+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -1.27+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -2.54+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -3.81+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
package.json+187−4@@ -1,6 +1,6 @@ { "slug": "lp339dr",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments Comparators, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,189 @@ "docs/hero.png", "docs/lp339dr-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "lp339dr-etched.step",+ "lp339dr-hero.glb",+ "lp339dr-hero.overlay.json"+ ],+ "component": {+ "mpn": "LP339DR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-14",+ "pin_count": 14,+ "category": "Op-amp/Cmp",+ "subcategory": "Comparators",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lp339.pdf",+ "parts": {+ "symbol": "lp339dr.kicad_sym",+ "footprint": "lp339dr.kicad_mod",+ "model_3d": "lp339dr-hero.glb",+ "model_3d_plain": "lp339dr.glb",+ "model_3d_step": "lp339dr-etched.step",+ "model_3d_step_plain": "lp339dr.step",+ "lbr": "lp339dr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "1OUT",+ "type": "output",+ "description": "Open-collector output of comparator 1. Requires an external pull-up resistor to a positive supply. Sinks current when the inverting input is above the non-inverting input."+ },+ {+ "number": "2",+ "name": "2OUT",+ "type": "output",+ "description": "Open-collector output of comparator 2. Requires an external pull-up resistor to a positive supply."+ },+ {+ "number": "3",+ "name": "V+",+ "type": "power_in",+ "description": "Positive supply voltage. Single-supply operation 2 V to 36 V or dual-supply ±1 V to ±18 V."+ },+ {+ "number": "4",+ "name": "2IN-",+ "type": "input",+ "description": "Inverting input of comparator 2. Common-mode input range includes ground (V-)."+ },+ {+ "number": "5",+ "name": "2IN+",+ "type": "input",+ "description": "Non-inverting input of comparator 2. Common-mode input range includes ground (V-)."+ },+ {+ "number": "6",+ "name": "1IN-",+ "type": "input",+ "description": "Inverting input of comparator 1. Common-mode input range includes ground (V-)."+ },+ {+ "number": "7",+ "name": "1IN+",+ "type": "input",+ "description": "Non-inverting input of comparator 1. Common-mode input range includes ground (V-)."+ },+ {+ "number": "8",+ "name": "3IN+",+ "type": "input",+ "description": "Non-inverting input of comparator 3. Common-mode input range includes ground (V-)."+ },+ {+ "number": "9",+ "name": "3IN-",+ "type": "input",+ "description": "Inverting input of comparator 3. Common-mode input range includes ground (V-)."+ },+ {+ "number": "10",+ "name": "4IN+",+ "type": "input",+ "description": "Non-inverting input of comparator 4. Common-mode input range includes ground (V-)."+ },+ {+ "number": "11",+ "name": "4IN-",+ "type": "input",+ "description": "Inverting input of comparator 4. Common-mode input range includes ground (V-)."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Ground / negative supply (V-). Tie to system ground in single-supply operation, or to the negative rail in dual-supply operation."+ },+ {+ "number": "13",+ "name": "4OUT",+ "type": "output",+ "description": "Open-collector output of comparator 4. Requires an external pull-up resistor to a positive supply."+ },+ {+ "number": "14",+ "name": "3OUT",+ "type": "output",+ "description": "Open-collector output of comparator 3. Requires an external pull-up resistor to a positive supply."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/lp339.pdf",+ "pages": 15,+ "sha256": "568cdf139073fc1a",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lp339dr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 8.7,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lp339dr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 8.7,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "e2c44348189befc30a8a4bc27d97c44468777f64b4f72c17943395ba6d9835e8",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "LP339DR",+ "brief": "Texas Instruments Comparators, SOIC-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "SOIC-14",+ "Category": "Op-amp/Cmp",+ "Pins": "14"+ }+ },+ "discovery_triggers": [+ "lp339dr"+ ],+ "discovery_pitch": "LP339DR (Texas Instruments) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+10−7@@ -4,7 +4,7 @@ "slug": "lp339dr", "title": "LP339DR", "brief": "Texas Instruments Comparators, SOIC-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -232,10 +232,13 @@ "docs/hero.png", "docs/lp339dr-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "lp339dr-etched.step",+ "lp339dr-hero.glb",+ "lp339dr-hero.overlay.json" ],- "visibility": {- "public": true- },- "updated_at": "2026-09-28T17:54:25.026Z"-}+ "visibility": "public",+ "updated_at": "2026-09-28T17:54:25.026Z",+ "description": "Texas Instruments Comparators, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}