← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# LP2998MAX++**Texas Instruments** · Battery Management · SOIC-8++LP2998MAX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Device ground return. Also connect the exposed pad (DDA package) to this net; SOIC-8 (MAX) has no exposed pad. |+| 2 | SD | input | Active-low shutdown. When pulled low the VTT output tri-states (Suspend-To-RAM); VREF remains active. Has an internal pull-up current so it can be left open or tied to AVIN to enable. Input range 0 to AVIN. |+| 3 | VSENSE | input | Remote-sense feedback pin for VTT regulation. Connect to VTT at the point of load (middle of the termination bus) for best distributed load regulation; tie directly to VTT at the pin if remote sense is not used. A small 0.1 µF ceramic near the pin helps reject noise pickup. |+| 4 | VREF | output | Buffered VDDQ/2 reference output for chipset/DIMM Vref inputs. Nominally 1.258 V (DDR-I, VDDQ=2.5 V), 0.910 V (DDR-II, 1.8 V) or 0.758 V (DDR-III, 1.5 V). Output impedance ~2.5 kΩ over ±30 µA; remains active during shutdown / thermal shutdown. Bypass with 0.01-0.1 µF ceramic near the pin. |+| 5 | VDDQ | input | Sense input for generating the internal VDDQ/2 reference via two internal 50 kΩ resistors (100 kΩ to GND total, always drawing current even in shutdown). Best used as a remote sense tied to the DDR VDDQ rail at the DIMM. Absolute max 6 V, and must be ≤ 2×(AVIN−1) V. |+| 6 | AVIN | power_in | Analog supply for the internal control circuitry. Recommended operating range 2.2 V to 5.5 V (absolute max 6 V). AVIN must be ≥ PVIN. |+| 7 | PVIN | power_in | Power input to the VTT output stage. Range 0 V to AVIN; recommended ≤ 3.3 V to keep internal dissipation within the thermal limit. Higher PVIN increases maximum continuous output current by lowering RDSON headroom above VTT. |+| 8 | VTT | power_out | Regulated DDR termination output at VDDQ/2. Sources and sinks up to ±1.5 A continuous with peak transients to ±3 A; tri-stated during SD-asserted shutdown and thermal shutdown. Requires a bulk output capacitor sized for expected transient step; VTT must not be pulled above AVIN while in shutdown. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `LP2998MAX`+- `LP2998MAXMR`+- `LP2998MAXMRX`+- `LP2998MAXMRE`++## CAD (KiCad official)++- Symbol: `LP2998MAX`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lp2998max.pdf) (None pp, sha256 `0b00a4c77bb17804`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lp2998max-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "lp2998max",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Battery Management, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "lp2998max"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lp2998max.kicad_sym",+ "lp2998max.kicad_mod",+ "lp2998max.glb",+ "lp2998max.step",+ "lp2998max.lbr",+ "docs/hero.png",+ "docs/lp2998max-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}