← Commit history

Initial commit: component/lp2986imx-5-0

Ray ·6b881c5d72 ·
2 files changed +203
README.mdadded+44
@@ -0,0 +1,44 @@+# LP2986IMX-5.0++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8++LP2986IMX-5.0 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GROUND | power_in | Ground reference for the device. |+| 2 | FEEDBACK | input | Feedback input for output voltage regulation; connect to TAP with OUT tied to SENSE for fixed voltage, or connect to external resistor divider for adjustable output. |+| 3 | TAP | output | Middle tap of internal voltage divider; tie to FEEDBACK with OUT tied to SENSE for fixed voltage output corresponding to part version. |+| 4 | IN | power_in | Input voltage supply with operating range 2.1 V to 16 V. |+| 5 | OUT | power_out | Regulated output voltage with 200-mA maximum output current and typical dropout of 180 mV at 200 mA. |+| 6 | SENSE | input | Sense input for voltage regulation; connect to OUT with FEEDBACK tied to TAP for fixed voltage, or leave open for external resistor divider configuration. |+| 7 | ERROR | output | Open-collector error output that goes low when VOUT drops by 5% of nominal value; requires external pull-up resistor. |+| 8 | SHUTDOWN | input | Active-high enable input; pull low to place regulator in shutdown mode drawing less than 1 μA quiescent current. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `LP2986IMX-5.0`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `lp2986imx-5-0-etched.step` / `lp2986imx-5-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp2986imx-5-0.step` / `lp2986imx-5-0.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lp2986) (39 pp, sha256 `f7cfc26eae25c4e3`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lp2986imx-5-0-datasheet.pdf)
page.jsonadded+159
@@ -0,0 +1,159 @@+{+  "slug": "lp2986imx-5-0",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lp2986imx-5.0",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lp2986imx-5-0.kicad_sym",+    "lp2986imx-5-0.kicad_mod",+    "lp2986imx-5-0.glb",+    "lp2986imx-5-0.step",+    "lp2986imx-5-0.lbr",+    "docs/hero.png",+    "docs/lp2986imx-5-0-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LP2986IMX-5.0",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Power Management (PMIC)",+    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lp2986",+    "parts": {+      "symbol": "lp2986imx-5-0.kicad_sym",+      "footprint": "lp2986imx-5-0.kicad_mod",+      "model_3d": "lp2986imx-5-0-etched.glb",+      "model_3d_plain": "lp2986imx-5-0.glb",+      "model_3d_step": "lp2986imx-5-0-etched.step",+      "model_3d_step_plain": "lp2986imx-5-0.step",+      "lbr": "lp2986imx-5-0.lbr"+    },+    "distributor_links": {+      "lcsc": "C2870907",+      "digikey": "2156-LP2986IMX-5.0-ND",+      "mouser": "926-LP2986IMX-50"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T03:08:08Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "2156-LP2986IMX-5.0-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "926-LP2986IMX-50",+        "status": "found",+        "lifecycle": "Obsolete"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "GROUND",+        "type": "power_in",+        "description": "Ground reference for the device."+      },+      {+        "number": "2",+        "name": "FEEDBACK",+        "type": "input",+        "description": "Feedback input for output voltage regulation; connect to TAP with OUT tied to SENSE for fixed voltage, or connect to external resistor divider for adjustable output."+      },+      {+        "number": "3",+        "name": "TAP",+        "type": "output",+        "description": "Middle tap of internal voltage divider; tie to FEEDBACK with OUT tied to SENSE for fixed voltage output corresponding to part version."+      },+      {+        "number": "4",+        "name": "IN",+        "type": "power_in",+        "description": "Input voltage supply with operating range 2.1 V to 16 V."+      },+      {+        "number": "5",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated output voltage with 200-mA maximum output current and typical dropout of 180 mV at 200 mA."+      },+      {+        "number": "6",+        "name": "SENSE",+        "type": "input",+        "description": "Sense input for voltage regulation; connect to OUT with FEEDBACK tied to TAP for fixed voltage, or leave open for external resistor divider configuration."+      },+      {+        "number": "7",+        "name": "ERROR",+        "type": "output",+        "description": "Open-collector error output that goes low when VOUT drops by 5% of nominal value; requires external pull-up resistor."+      },+      {+        "number": "8",+        "name": "SHUTDOWN",+        "type": "input",+        "description": "Active-high enable input; pull low to place regulator in shutdown mode drawing less than 1 μA quiescent current."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "1/8 pins cited to the wrong page (name found elsewhere): ['1:GROUND@p3']"+        ],+        "pages_sent": 16,+        "cost_usd": 0.1191,+        "at": "2026-10-01T03:07:52"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lp2986",+        "pages": 39,+        "sha256": "f7cfc26eae25c4e3",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file