component
LP2981-33DBVR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,19 +32,19 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Supply input. Accepts 2.2 V to 16 V (continuous absolute max 16 V). Should be bypassed with a 1-\u00b5F ceramic capacitor (CIN) close to the pin."+ "description": "Supply input. Accepts 2.2 V to 16 V (continuous absolute max 16 V). Should be bypassed with a 1-µF ceramic capacitor (CIN) close to the pin." }, { "number": "2", "name": "GND", "type": "power_in",- "description": "Ground return for the regulator. Ground pin current (IGND) is typically 600 \u00b5A at 100-mA load."+ "description": "Ground return for the regulator. Ground pin current (IGND) is typically 600 µA at 100-mA load." }, { "number": "3", "name": "ON/OFF", "type": "input",- "description": "Active-low shutdown pin. Drive high (\u22651.6 V over temp) to enable the regulator; drive low (\u22640.15 V over temp) to place the device in shutdown (~0.01 \u00b5A typical). Must be actively terminated; tie to VIN if unused. Absolute max 16 V; operating range 0 V to VIN."+ "description": "Active-low shutdown pin. Drive high (≥1.6 V over temp) to enable the regulator; drive low (≤0.15 V over temp) to place the device in shutdown (~0.01 µA typical). Must be actively terminated; tie to VIN if unused. Absolute max 16 V; operating range 0 V to VIN." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "VOUT", "type": "power_out",- "description": "Regulated 3.3-V output, 100-mA continuous capability (short-circuit protected, ~150 mA). Requires a minimum 4.7-\u00b5F output capacitor (COUT) for stability."+ "description": "Regulated 3.3-V output, 100-mA continuous capability (short-circuit protected, ~150 mA). Requires a minimum 4.7-µF output capacitor (COUT) for stability." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/lp2981-33dbvr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }