component
LP2980IM5X-3.0
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+42@@ -0,0 +1,42 @@+# LP2980IM5X-3.0++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5++LP2980IM5X-3.0 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | input | Input supply pin, which needs a capacitor of 1 µF or larger from this pin to ground; the recommended supply input voltage for the new chip is 2.5 V to 16 V. |+| 2 | GND | power_in | Common ground (device substrate). |+| 3 | ON/OFF | input | Enable pin: driving it high enables the LDO and driving it low disables it, with thresholds given in the Electrical Characteristics table, the enable voltage limited to 0 V to 16 V, and it must be tied to VIN if unused. |+| 4 | N/C | unconnected | Do not connect; this pin is reserved for post-packaging VOUT trim and must be left floating, not tied to any potential or to ground. |+| 5 | OUT | power_out | Regulator output, which needs a capacitor of 2.2 µF or larger to ground with at least 1 µF effective capacitance at the pin, and supplies up to 50 mA with VOUT of 1.2 V to 5 V for the new chip. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOT-23-5 |+| Category | Power Management (PMIC) |+| Pins | 5 |++## CAD (KiCad official)++- Symbol: `LP2980IM5X-3.0`+- Footprint: `Package_TO_SOT_SMD:SOT-23-5`+- 3D model: SOT-23-5 (KiCad packages3D, STEP)+- 3D model files: `lp2980im5x-3-0-etched.step` / `lp2980im5x-3-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp2980im5x-3-0.step` / `lp2980im5x-3-0.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lp2980-n) (39 pp, sha256 `134be8e046145f40`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lp2980im5x-3-0-datasheet.pdf)
page.jsonadded+183@@ -0,0 +1,183 @@+{+ "slug": "lp2980im5x-3-0",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "lp2980im5x-3.0",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lp2980im5x-3-0.kicad_sym",+ "lp2980im5x-3-0.kicad_mod",+ "lp2980im5x-3-0.glb",+ "lp2980im5x-3-0.step",+ "lp2980im5x-3-0.lbr",+ "docs/hero.png",+ "docs/lp2980im5x-3-0-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lp2980im5x-3-0-hero.glb",+ "lp2980im5x-3-0-hero.overlay.json"+ ],+ "component": {+ "mpn": "LP2980IM5X-3.0",+ "manufacturer": "Texas Instruments",+ "package": "SOT-23-5",+ "pin_count": 5,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lp2980-n",+ "parts": {+ "symbol": "lp2980im5x-3-0.kicad_sym",+ "footprint": "lp2980im5x-3-0.kicad_mod",+ "model_3d": "lp2980im5x-3-0-hero.glb",+ "model_3d_plain": "lp2980im5x-3-0.glb",+ "model_3d_step": "lp2980im5x-3-0-etched.step",+ "model_3d_step_plain": "lp2980im5x-3-0.step",+ "lbr": "lp2980im5x-3-0.lbr"+ },+ "distributor_links": {+ "lcsc": "C132033",+ "digikey": "296-36267-2-ND",+ "mouser": "926-LP2980IM5X-30"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T06:28:08Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-36267-2-ND",+ "status": "found",+ "lifecycle": "Not For New Designs"+ },+ "mouser": {+ "pn": "926-LP2980IM5X-30",+ "status": "found",+ "lifecycle": "Obsolete"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "input",+ "description": "Input supply pin, which needs a capacitor of 1 µF or larger from this pin to ground; the recommended supply input voltage for the new chip is 2.5 V to 16 V."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Common ground (device substrate)."+ },+ {+ "number": "3",+ "name": "ON/OFF",+ "type": "input",+ "description": "Enable pin: driving it high enables the LDO and driving it low disables it, with thresholds given in the Electrical Characteristics table, the enable voltage limited to 0 V to 16 V, and it must be tied to VIN if unused."+ },+ {+ "number": "4",+ "name": "N/C",+ "type": "unconnected",+ "description": "Do not connect; this pin is reserved for post-packaging VOUT trim and must be left floating, not tied to any potential or to ground."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulator output, which needs a capacitor of 2.2 µF or larger to ground with at least 1 µF effective capacitance at the pin, and supplies up to 50 mA with VOUT of 1.2 V to 5 V for the new chip."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The top-view drawing (Figure 4-1) did not extract cleanly from the PDF text, so the pin numbers and ; The orderable-part list (package addendum, page 30) includes LP2980IM5X-3.0/NOPB and the 5-pin DBV (; The datasheet is for the LP2980-N family, with a legacy chip and a new chip. Some ratings differ bet"+ ],+ "pages_sent": 11,+ "cost_usd": 0.0681,+ "at": "2026-10-08T06:27:55"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lp2980-n",+ "pages": 39,+ "sha256": "134be8e046145f40",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 5,+ "described": 5,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lp2980im5x-3-0.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lp2980im5x-3-0-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "7758c60fa49c1538d038e6d2914e4ec62dfe91bf9fa921b46e2e361ff0250c9f",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}