← Commit history

Initial commit: component/lp2951g-s08-r

Ray ·a353d0ffd2 ·
2 files changed +90
README.mdadded+56
@@ -0,0 +1,56 @@+# LP2951G-S08-R++**UTC Unisonic Tech** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOP-8++LP2951G-S08-R from UTC Unisonic Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OUTPUT | power_out | Regulated voltage output, up to 100mA. Connect to Sense (pin 2) at the load for remote sensing, or tie directly to Sense at the pin for local regulation. Requires a minimum output capacitor (typ. 1μF) for stability. |+| 2 | SENSE | input | Output sense input for the internal error amplifier feedback path. Connect to VOUT at the load (Kelvin sense) to compensate for IR drops in the output trace; must be connected - typically tied to pin 1 for local sensing. |+| 3 | SHUTDOWN | input | Active-high logic shutdown input, CMOS/TTL compatible. VIH ≥ 2.0V turns the regulator OFF; VIL ≤ 0.7V keeps it ON. Absolute max -0.3V to +30V; input current ~30μA at 2.4V, ~450μA at 30V. |+| 4 | GND | power_in | Device ground reference. Typical ground current ~120μA at IL=100μA and ~12mA at IL=100mA. |+| 5 | ERROR | output | Active-low, open-collector error flag output. Pulls low when the regulated output falls ~5% below nominal (out-of-regulation indicator). VOL ≤ 250mV at IOL = 400μA; leakage ≤ 1μA at VOH = 30V. Requires an external pull-up. |+| 6 | 5V TAP | output | Tap point on the internal feedback divider (182kΩ / 60kΩ) that produces the 1.235V reference-based 5V setpoint. Tie to FEEDBACK (pin 7) to use the internal divider for a fixed 5V output; leave open when programming a custom output voltage with external resistors on pin 7. |+| 7 | FEEDBACK | input | Error-amplifier feedback input, regulated to the internal 1.235V reference (VREF 1.22-1.25V). For a fixed 5V output tie to pin 6 (5V TAP); for a programmable output use an external divider VOUT = 1.23V × (1 + R1/R2). IFB typ 20nA. Absolute max -1.5V to +30V. |+| 8 | INPUT | power_in | Unregulated DC supply input. Operating range up to 30V (absolute max -0.3V to +30V). Dropout voltage typ 50mV at IL=100μA and 380mV at IL=100mA. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | UTC Unisonic Tech |+| Package | SOP-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `LP2951G-S08-R`+- `LP2951G-S08-RLP2951L-S08-R`+- `LP2951G-S08-RLP2951G-D08-T`+- `LP2951G-S08-RLP2951L-D08-T`+- `LP2951G-S08-RLP2951G-P08-R`+- `LP2951G-S08-RLP2951L-P08-R`+- `LP2951G-S08-RLP2951G-SM1-R`+- `LP2951G-S08-RLP2951L-SM1-R`+- `LP2951G-S08-RLP2951G-K08-3030-R`+- `LP2951G-S08-RLP2951L-K08-3030-R`++## CAD (KiCad official)++- Symbol: `LP2951G-S08-R`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [UTC Unisonic Tech datasheet](docs/lp2951g-s08-r-datasheet.pdf) (None pp, sha256 `20a511b102c0511d`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lp2951g-s08-r-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lp2951g-s08-r",+  "version": "0.1.0",+  "type": "component",+  "description": "UTC Unisonic Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "lp2951g-s08-r"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lp2951g-s08-r.kicad_sym",+    "lp2951g-s08-r.kicad_mod",+    "lp2951g-s08-r.glb",+    "lp2951g-s08-r.step",+    "lp2951g-s08-r.lbr",+    "docs/hero.png",+    "docs/lp2951g-s08-r-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file