← Commit history
lp2951g-s08-r: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "LP2951G-S08-R",+ "manufacturer": "UTC Unisonic Tech",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "parts": {+ "symbol": "lp2951g-s08-r.kicad_sym",+ "footprint": "lp2951g-s08-r.kicad_mod",+ "model_3d": "lp2951g-s08-r-etched.glb",+ "model_3d_plain": "lp2951g-s08-r.glb",+ "model_3d_step": "lp2951g-s08-r-etched.step",+ "model_3d_step_plain": "lp2951g-s08-r.step",+ "lbr": "lp2951g-s08-r.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "OUTPUT",+ "type": "power_out",+ "description": "Regulated voltage output, up to 100mA. Connect to Sense (pin 2) at the load for remote sensing, or tie directly to Sense at the pin for local regulation. Requires a minimum output capacitor (typ. 1μF) for stability."+ },+ {+ "number": "2",+ "name": "SENSE",+ "type": "input",+ "description": "Output sense input for the internal error amplifier feedback path. Connect to VOUT at the load (Kelvin sense) to compensate for IR drops in the output trace; must be connected - typically tied to pin 1 for local sensing."+ },+ {+ "number": "3",+ "name": "SHUTDOWN",+ "type": "input",+ "description": "Active-high logic shutdown input, CMOS/TTL compatible. VIH ≥ 2.0V turns the regulator OFF; VIL ≤ 0.7V keeps it ON. Absolute max -0.3V to +30V; input current ~30μA at 2.4V, ~450μA at 30V."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference. Typical ground current ~120μA at IL=100μA and ~12mA at IL=100mA."+ },+ {+ "number": "5",+ "name": "ERROR",+ "type": "output",+ "description": "Active-low, open-collector error flag output. Pulls low when the regulated output falls ~5% below nominal (out-of-regulation indicator). VOL ≤ 250mV at IOL = 400μA; leakage ≤ 1μA at VOH = 30V. Requires an external pull-up."+ },+ {+ "number": "6",+ "name": "5V TAP",+ "type": "output",+ "description": "Tap point on the internal feedback divider (182kΩ / 60kΩ) that produces the 1.235V reference-based 5V setpoint. Tie to FEEDBACK (pin 7) to use the internal divider for a fixed 5V output; leave open when programming a custom output voltage with external resistors on pin 7."+ },+ {+ "number": "7",+ "name": "FEEDBACK",+ "type": "input",+ "description": "Error-amplifier feedback input, regulated to the internal 1.235V reference (VREF 1.22-1.25V). For a fixed 5V output tie to pin 6 (5V TAP); for a programmable output use an external divider VOUT = 1.23V × (1 + R1/R2). IFB typ 20nA. Absolute max -1.5V to +30V."+ },+ {+ "number": "8",+ "name": "INPUT",+ "type": "power_in",+ "description": "Unregulated DC supply input. Operating range up to 30V (absolute max -0.3V to +30V). Dropout voltage typ 50mV at IL=100μA and 380mV at IL=100mA."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}