component
LP2951CMX
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -38,7 +38,7 @@ "number": "1", "name": "OUT", "type": "output",- "description": "Regulated output voltage programmable or fixed from 1.24V to 29V with \u00b10.5% typical accuracy and ensured 100-mA maximum output current capability."+ "description": "Regulated output voltage programmable or fixed from 1.24V to 29V with ±0.5% typical accuracy and ensured 100-mA maximum output current capability." }, { "number": "2",@@ -50,7 +50,7 @@ "number": "3", "name": "SHUTDOWN", "type": "input",- "description": "Active-high logic shutdown input; voltage \u22652V disables regulator reducing quiescent current to 3\u00b5A typical, voltage \u22640.6V enables regulator operation."+ "description": "Active-high logic shutdown input; voltage ≥2V disables regulator reducing quiescent current to 3µA typical, voltage ≤0.6V enables regulator operation." }, { "number": "4",@@ -62,25 +62,25 @@ "number": "5", "name": "ERROR", "type": "output",- "description": "Open-collector error comparator output sinking up to 400\u00b5A that goes low when regulated output voltage falls more than approximately 5% below nominal programmed value."+ "description": "Open-collector error comparator output sinking up to 400µA that goes low when regulated output voltage falls more than approximately 5% below nominal programmed value." }, { "number": "6", "name": "VTAP", "type": "output",- "description": "Internal resistor divider tap providing nominal 1.235-V reference voltage (1.22-1.25V at 25\u00b0C, 1.2-1.26V over temperature) for feedback circuit biasing."+ "description": "Internal resistor divider tap providing nominal 1.235-V reference voltage (1.22-1.25V at 25°C, 1.2-1.26V over temperature) for feedback circuit biasing." }, { "number": "7", "name": "FEEDBACK", "type": "input",- "description": "Feedback input voltage for error amplifier with maximum \u00b140-nA bias current; tie to VTAP for fixed voltage or to external resistor divider for 1.24-29V programmable output."+ "description": "Feedback input voltage for error amplifier with maximum ±40-nA bias current; tie to VTAP for fixed voltage or to external resistor divider for 1.24-29V programmable output." }, { "number": "8", "name": "IN", "type": "power_in",- "description": "Input supply voltage connection accepting 2.3V to 30V range with minimum 1-\u00b5F input capacitor recommended for loop stability if wire length exceeds 10 inches."+ "description": "Input supply voltage connection accepting 2.3V to 30V range with minimum 1-µF input capacitor recommended for loop stability if wire length exceeds 10 inches." } ], "provenance": {@@ -158,5 +158,8 @@ "docs/lp2951cmx-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }