← Commit history

lp2951cmx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·5e8d7e3549 · ·parent 8db8078
2 files changed +90−10
package.json+48−8
@@ -53,7 +53,7 @@         "number": "1",         "name": "OUT",         "type": "output",-        "description": "Regulated output voltage programmable or fixed from 1.24V to 29V with \u00b10.5% typical accuracy and ensured 100-mA maximum output current capability."+        "description": "Regulated output voltage programmable or fixed from 1.24V to 29V with ±0.5% typical accuracy and ensured 100-mA maximum output current capability."       },       {         "number": "2",@@ -65,7 +65,7 @@         "number": "3",         "name": "SHUTDOWN",         "type": "input",-        "description": "Active-high logic shutdown input; voltage \u22652V disables regulator reducing quiescent current to 3\u00b5A typical, voltage \u22640.6V enables regulator operation."+        "description": "Active-high logic shutdown input; voltage ≥2V disables regulator reducing quiescent current to 3µA typical, voltage ≤0.6V enables regulator operation."       },       {         "number": "4",@@ -77,25 +77,25 @@         "number": "5",         "name": "ERROR",         "type": "output",-        "description": "Open-collector error comparator output sinking up to 400\u00b5A that goes low when regulated output voltage falls more than approximately 5% below nominal programmed value."+        "description": "Open-collector error comparator output sinking up to 400µA that goes low when regulated output voltage falls more than approximately 5% below nominal programmed value."       },       {         "number": "6",         "name": "VTAP",         "type": "output",-        "description": "Internal resistor divider tap providing nominal 1.235-V reference voltage (1.22-1.25V at 25\u00b0C, 1.2-1.26V over temperature) for feedback circuit biasing."+        "description": "Internal resistor divider tap providing nominal 1.235-V reference voltage (1.22-1.25V at 25°C, 1.2-1.26V over temperature) for feedback circuit biasing."       },       {         "number": "7",         "name": "FEEDBACK",         "type": "input",-        "description": "Feedback input voltage for error amplifier with maximum \u00b140-nA bias current; tie to VTAP for fixed voltage or to external resistor divider for 1.24-29V programmable output."+        "description": "Feedback input voltage for error amplifier with maximum ±40-nA bias current; tie to VTAP for fixed voltage or to external resistor divider for 1.24-29V programmable output."       },       {         "number": "8",         "name": "IN",         "type": "power_in",-        "description": "Input supply voltage connection accepting 2.3V to 30V range with minimum 1-\u00b5F input capacitor recommended for loop stability if wire length exceeds 10 inches."+        "description": "Input supply voltage connection accepting 2.3V to 30V range with minimum 1-µF input capacitor recommended for loop stability if wire length exceeds 10 inches."       }     ],     "provenance": {@@ -130,6 +130,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lp2951cmx.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lp2951cmx-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "744941ea684bd01113b980e093aba599f54fa14ac8c221ad2a8ca77b6c1ace9a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -115,7 +115,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lp2951cmx.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lp2951cmx-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "744941ea684bd01113b980e093aba599f54fa14ac8c221ad2a8ca77b6c1ace9a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -163,4 +203,4 @@     "public": true   },   "updated_at": "2026-09-28T17:49:02.160Z"-}\ No newline at end of file+}