← Commit history
Publish 0.1.1
4 files changed
+421−11
lp2951acmx-3-3-hero.glbadded⋯ 1 unchanged line ⋯
lp2951acmx-3-3-hero.overlay.jsonadded+260@@ -0,0 +1,260 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LP2951ACMX-3.3",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 8,+ "span_mm": 6.9,+ "dash_mm": 0.1725,+ "gap_mm": 0.1035,+ "pad_stroke_mm": 0.0414+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.552,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -2.11,+ 2.11+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -2.205,+ 2.205+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "lp2951acmx-3-3-etched.glb",+ "glb_sha256": "4b81bcd5ce5f5b02e81d4b3e83279affad7fe9d68ed998c012b32aa12b4ecb22",+ "footprint": "lp2951acmx-3-3.kicad_mod",+ "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+ "pins": "page.json component.pins",+ "pins_sha256": "6722437b03c8e6fc62e50039ff46701afbf79bfcf76a3149e562d76b7e778ee6"+ },+ "generator": "adom-wiki 1.8.25 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "OUT",+ "x": -3.6,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "SENSE",+ "x": -3.6,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "SHUTDOWN",+ "x": -3.6,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "GROUND",+ "x": -3.6,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "ERROR",+ "x": 3.6,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "VTAP",+ "x": 3.6,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "FEEDBACK",+ "x": 3.6,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "IN",+ "x": 3.6,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
package.json+151−4@@ -1,6 +1,6 @@ { "slug": "lp2951acmx-3-3",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,153 @@ "docs/hero.png", "docs/lp2951acmx-3-3-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "lp2951acmx-3-3-etched.step",+ "lp2951acmx-3-3-hero.glb",+ "lp2951acmx-3-3-hero.overlay.json"+ ],+ "component": {+ "mpn": "LP2951ACMX-3.3",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "PMIC",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lp2951acmx-3.3.pdf",+ "parts": {+ "symbol": "lp2951acmx-3-3.kicad_sym",+ "footprint": "lp2951acmx-3-3.kicad_mod",+ "model_3d": "lp2951acmx-3-3-hero.glb",+ "model_3d_plain": "lp2951acmx-3-3.glb",+ "model_3d_step": "lp2951acmx-3-3-etched.step",+ "model_3d_step_plain": "lp2951acmx-3-3.step",+ "lbr": "lp2951acmx-3-3.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated 3.3-V output (±0.5% initial tolerance for the AC grade). Rated for 100-mA continuous load current. Requires a minimum output capacitor (typ. 2.2 µF, ESR 10 mΩ-6 Ω) for loop stability."+ },+ {+ "number": "2",+ "name": "SENSE",+ "type": "input",+ "description": "Output-voltage sense input for the internal error amplifier. Normally connected directly to OUT (pin 1) at the load to compensate for wiring/trace drops. Do not leave floating in the fixed-output configuration."+ },+ {+ "number": "3",+ "name": "SHUTDOWN",+ "type": "input",+ "description": "Logic-level shutdown input. Drive high (>2 V) to disable the regulator (output off, quiescent current drops to a few µA); drive low (<0.7 V) or tie to GND for normal operation. Absolute maximum is 30 V."+ },+ {+ "number": "4",+ "name": "GROUND",+ "type": "power_in",+ "description": "Device ground reference. Return for the internal reference, error amplifier, and pass-element quiescent current."+ },+ {+ "number": "5",+ "name": "ERROR",+ "type": "output",+ "description": "Open-collector error/dropout flag output (active-low). Pulls low when the output falls approximately 5% below its nominal regulated value (e.g. supply dropout or shutdown). Requires an external pull-up resistor; useful for power-on reset or low-battery warning."+ },+ {+ "number": "6",+ "name": "VTAP",+ "type": "output",+ "description": "Center-tap of the internal output-programming resistor divider, exposing the internal 1.235-V bandgap reference. Can be used as a low-current reference, or bypassed with a small capacitor to GND to reduce output noise."+ },+ {+ "number": "7",+ "name": "FEEDBACK",+ "type": "input",+ "description": "Inverting error-amplifier feedback input. Tie to OUT (or the top of an external resistor divider from OUT) to select the fixed 3.3-V output; use with external divider to program the output from 1.24 V to 29 V. Absolute maximum −1.5 V to +30 V."+ },+ {+ "number": "8",+ "name": "IN",+ "type": "power_in",+ "description": "Unregulated input supply. Operating range 2.3 V to 30 V (must be at least ~VOUT + dropout, typ. 40 mV at light load, 380 mV at 100 mA). Bypass locally with a 1-µF capacitor to GND."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/lp2951acmx-3.3.pdf",+ "pages": 54,+ "sha256": "a598f6d0f6acb68d",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lp2951acmx-3-3.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lp2951acmx-3-3-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "28433a5b4b7b556c433a43552f38cd2554001400631d09c9b3a719fdb66eb8b1",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "LP2951ACMX-3.3",+ "brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "SOIC-8",+ "Category": "PMIC",+ "Pins": "8"+ }+ },+ "discovery_triggers": [+ "lp2951acmx-3.3"+ ],+ "discovery_pitch": "LP2951ACMX-3.3 (Texas Instruments) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+10−7@@ -4,7 +4,7 @@ "slug": "lp2951acmx-3-3", "title": "LP2951ACMX-3.3", "brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -224,10 +224,13 @@ "docs/hero.png", "docs/lp2951acmx-3-3-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "lp2951acmx-3-3-etched.step",+ "lp2951acmx-3-3-hero.glb",+ "lp2951acmx-3-3-hero.overlay.json" ],- "visibility": {- "public": true- },- "updated_at": "2026-09-28T17:48:39.227Z"-}+ "visibility": "public",+ "updated_at": "2026-09-28T17:48:39.227Z",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}