← Commit history
page.json+162−8@@ -1,13 +1,172 @@ {+ "schema_version": 1,+ "type": "component", "slug": "lp2951acmx-3-3",+ "title": "LP2951ACMX-3.3",+ "brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "lp2951acmx-3.3" ],+ "component": {+ "mpn": "LP2951ACMX-3.3",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "PMIC",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/lit/ds/symlink/lp2951acmx-3.3.pdf",+ "parts": {+ "symbol": "lp2951acmx-3-3.kicad_sym",+ "footprint": "lp2951acmx-3-3.kicad_mod",+ "model_3d": "lp2951acmx-3-3.glb",+ "model_3d_step": "lp2951acmx-3-3.step",+ "lbr": "lp2951acmx-3-3.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated 3.3-V output (\u00b10.5% initial tolerance for the AC grade). Rated for 100-mA continuous load current. Requires a minimum output capacitor (typ. 2.2 \u00b5F, ESR 10 m\u03a9-6 \u03a9) for loop stability."+ },+ {+ "number": "2",+ "name": "SENSE",+ "type": "input",+ "description": "Output-voltage sense input for the internal error amplifier. Normally connected directly to OUT (pin 1) at the load to compensate for wiring/trace drops. Do not leave floating in the fixed-output configuration."+ },+ {+ "number": "3",+ "name": "SHUTDOWN",+ "type": "input",+ "description": "Logic-level shutdown input. Drive high (>2 V) to disable the regulator (output off, quiescent current drops to a few \u00b5A); drive low (<0.7 V) or tie to GND for normal operation. Absolute maximum is 30 V."+ },+ {+ "number": "4",+ "name": "GROUND",+ "type": "power_in",+ "description": "Device ground reference. Return for the internal reference, error amplifier, and pass-element quiescent current."+ },+ {+ "number": "5",+ "name": "ERROR",+ "type": "output",+ "description": "Open-collector error/dropout flag output (active-low). Pulls low when the output falls approximately 5% below its nominal regulated value (e.g. supply dropout or shutdown). Requires an external pull-up resistor; useful for power-on reset or low-battery warning."+ },+ {+ "number": "6",+ "name": "VTAP",+ "type": "output",+ "description": "Center-tap of the internal output-programming resistor divider, exposing the internal 1.235-V bandgap reference. Can be used as a low-current reference, or bypassed with a small capacitor to GND to reduce output noise."+ },+ {+ "number": "7",+ "name": "FEEDBACK",+ "type": "input",+ "description": "Inverting error-amplifier feedback input. Tie to OUT (or the top of an external resistor divider from OUT) to select the fixed 3.3-V output; use with external divider to program the output from 1.24 V to 29 V. Absolute maximum \u22121.5 V to +30 V."+ },+ {+ "number": "8",+ "name": "IN",+ "type": "power_in",+ "description": "Unregulated input supply. Operating range 2.3 V to 30 V (must be at least ~VOUT + dropout, typ. 40 mV at light load, 380 mV at 100 mA). Bypass locally with a 1-\u00b5F capacitor to GND."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/lp2951acmx-3.3.pdf",+ "pages": 54,+ "sha256": "a598f6d0f6acb68d",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "SOIC-8",+ "Category": "PMIC",+ "Pins": "8"+ }+ },+ "variants": [+ {+ "mpn": "LP2951ACMX-3.3",+ "kind": "packaging"+ },+ {+ "mpn": "LP2951ACMX-3.3ACDGK",+ "kind": "packaging"+ },+ {+ "mpn": "LP2951ACMX-3.3ACDGKX",+ "kind": "packaging"+ },+ {+ "mpn": "LP2951ACMX-3.3CDGK",+ "kind": "packaging"+ },+ {+ "mpn": "LP2951ACMX-3.3CDGKX",+ "kind": "packaging"+ },+ {+ "mpn": "LP2951ACMX-3.3ACNGT",+ "kind": "packaging"+ },+ {+ "mpn": "LP2951ACMX-3.3ACNGTX",+ "kind": "packaging"+ },+ {+ "mpn": "LP2951ACMX-3.3CNGT",+ "kind": "packaging"+ },+ {+ "mpn": "LP2951ACMX-3.3CNGTX",+ "kind": "packaging"+ },+ {+ "mpn": "LP2951ACMX-3.3ACN",+ "kind": "packaging"+ },+ {+ "mpn": "LP2951ACMX-3.3CN",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "lp2951acmx-3.3"+ ],+ "discovery_pitch": "LP2951ACMX-3.3 (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +184,5 @@ "docs/lp2951acmx-3-3-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }