LP2951ACMMX

@@ -1,13 +1,126 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "lp2951acmmx",+  "title": "LP2951ACMMX",+  "brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, VSSOP-8-0.65mm. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "lp2951acmmx"   ],+  "component": {+    "mpn": "LP2951ACMMX",+    "manufacturer": "Texas Instruments",+    "package": "VSSOP-8-0.65mm",+    "pin_count": 8,+    "category": "PMIC",+    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2302220030_Texas-Instruments-LP2951ACMMX-NOPB_C2872199.pdf",+    "parts": {+      "symbol": "lp2951acmmx.kicad_sym",+      "footprint": "lp2951acmmx.kicad_mod",+      "model_3d": "lp2951acmmx.glb",+      "model_3d_step": "lp2951acmmx.step",+      "lbr": "lp2951acmmx.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated output voltage. Delivers up to 100 mA; programmable from 1.24 V to 29 V by external divider (or pin-strapped to 3 V, 3.3 V, or 5 V by tying FEEDBACK to VTAP). Requires an output capacitor for stability."+      },+      {+        "number": "2",+        "name": "SENSE",+        "type": "input",+        "description": "Output voltage sense input for the internal reference divider. Normally tied directly to OUT (or to the load Kelvin point) so the regulator senses the actual load voltage."+      },+      {+        "number": "3",+        "name": "SHUTDOWN",+        "type": "input",+        "description": "Logic-level shutdown input. Drive high to disable the regulator (output off) or low to enable normal operation. Referenced to GND, tolerates up to 30 V."+      },+      {+        "number": "4",+        "name": "GROUND",+        "type": "power_in",+        "description": "Device ground reference. Return for input supply, output capacitor, and internal reference."+      },+      {+        "number": "5",+        "name": "ERROR",+        "type": "output",+        "description": "Open-collector active-low error flag. Pulls low when the regulated output falls approximately 5% below its nominal value (dropout, over-current, thermal shutdown, or low VIN); typically used for power-on reset or brown-out indication. Requires an external pull-up resistor."+      },+      {+        "number": "6",+        "name": "VTAP",+        "type": "output",+        "description": "Tap of the internal precision resistor divider used to set the fixed 5 V / 3.3 V / 3 V output. Tie to FEEDBACK for the preset factory output; leave open when programming a custom output with an external divider."+      },+      {+        "number": "7",+        "name": "FEEDBACK",+        "type": "input",+        "description": "Voltage feedback input to the error amplifier (internal reference \u2248 1.235 V). Tie to VTAP for the preset output, or drive from an external R1/R2 divider from OUT to GND to program VOUT from 1.24 V to 29 V."+      },+      {+        "number": "8",+        "name": "IN",+        "type": "power_in",+        "description": "Unregulated input supply. Operates from 2.3 V to 30 V; requires a small input decoupling capacitor (typ. 1 \u00b5F)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2302220030_Texas-Instruments-LP2951ACMMX-NOPB_C2872199.pdf",+        "pages": 61,+        "sha256": "4478ca091af597ac",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "VSSOP-8-0.65mm",+      "Category": "PMIC",+      "Pins": "8"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "lp2951acmmx"+  ],+  "discovery_pitch": "LP2951ACMMX (Texas Instruments) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +138,5 @@     "docs/lp2951acmmx-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file