← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "OUT", "type": "power_out",- "description": "Regulated output voltage (3.3 V nominal, \u00b10.5% typ). Sourced through internal PMOS pass element; rated to 100 mA. Requires an output capacitor (\u2265 2.2 \u00b5F for 3.3-V version) with ESR of 10 m\u03a9-6 \u03a9 for stability."+ "description": "Regulated output voltage (3.3 V nominal, ±0.5% typ). Sourced through internal PMOS pass element; rated to 100 mA. Requires an output capacitor (≥ 2.2 µF for 3.3-V version) with ESR of 10 mΩ-6 Ω for stability." }, { "number": "2",@@ -44,7 +44,7 @@ "number": "3", "name": "SHUTDOWN", "type": "input",- "description": "Logic-level shutdown control. Regulator ON when driven low (\u2264 0.6 V ensured over -40 \u00b0C to 125 \u00b0C); regulator OFF when driven high (\u2265 2 V). Input threshold typ 1.3 V; may be tied to IN or driven from CMOS/TTL logic."+ "description": "Logic-level shutdown control. Regulator ON when driven low (≤ 0.6 V ensured over -40 °C to 125 °C); regulator OFF when driven high (≥ 2 V). Input threshold typ 1.3 V; may be tied to IN or driven from CMOS/TTL logic." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "ERROR", "type": "output",- "description": "Open-collector active-low error flag. Pulls low when the output falls ~5% below nominal (dropout / undervoltage warning); useful as a power-on-reset. Off-state leakage \u2264 1 \u00b5A at 30 V; VOL \u2264 250 mV at IOL = 400 \u00b5A. Requires an external pull-up resistor."+ "description": "Open-collector active-low error flag. Pulls low when the output falls ~5% below nominal (dropout / undervoltage warning); useful as a power-on-reset. Off-state leakage ≤ 1 µA at 30 V; VOL ≤ 250 mV at IOL = 400 µA. Requires an external pull-up resistor." }, { "number": "6",@@ -68,13 +68,13 @@ "number": "7", "name": "FEEDBACK", "type": "input",- "description": "Error-amplifier feedback input; internally regulated to VREF \u2248 1.235 V. Tie to VTAP (pin 6) for the fixed 3.3-V output, or connect to an external R1/R2 divider from OUT to program 1.24 V \u2264 VOUT \u2264 29 V. Input bias current ~20 nA (typ)."+ "description": "Error-amplifier feedback input; internally regulated to VREF ≈ 1.235 V. Tie to VTAP (pin 6) for the fixed 3.3-V output, or connect to an external R1/R2 divider from OUT to program 1.24 V ≤ VOUT ≤ 29 V. Input bias current ~20 nA (typ)." }, { "number": "8", "name": "IN", "type": "power_in",- "description": "Input supply voltage, 2.3 V to 30 V. Requires a bypass capacitor (\u2265 1 \u00b5F) close to the pin. Dropout is typically 40 mV at 100 \u00b5A and 380 mV at 100 mA of load."+ "description": "Input supply voltage, 2.3 V to 30 V. Requires a bypass capacitor (≥ 1 µF) close to the pin. Dropout is typically 40 mV at 100 µA and 380 mV at 100 mA of load." } ], "provenance": {@@ -164,5 +164,8 @@ "docs/lp2951acm-3-3-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }