← Commit history
Publish 0.1.1
4 files changed
+421−11
lp2951acm-3-3-hero.glbadded⋯ 1 unchanged line ⋯
lp2951acm-3-3-hero.overlay.jsonadded+260@@ -0,0 +1,260 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LP2951ACM-3.3",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 8,+ "span_mm": 6.9,+ "dash_mm": 0.1725,+ "gap_mm": 0.1035,+ "pad_stroke_mm": 0.0414+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.552,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -2.11,+ 2.11+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -2.205,+ 2.205+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "lp2951acm-3-3-etched.glb",+ "glb_sha256": "00c6e838eec06b6a099c62e9941990ba22ad92aeb0c66fda01030c69fd0faf81",+ "footprint": "lp2951acm-3-3.kicad_mod",+ "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+ "pins": "page.json component.pins",+ "pins_sha256": "acb21b7c48e23fd0dcc1d15e76b8b60399a56f473bcca543b5b497b4e40d95b2"+ },+ "generator": "adom-wiki 1.8.25 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "OUT",+ "x": -3.6,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "SENSE",+ "x": -3.6,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "SHUTDOWN",+ "x": -3.6,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "GND",+ "x": -3.6,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "ERROR",+ "x": 3.6,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "VTAP",+ "x": 3.6,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "FEEDBACK",+ "x": 3.6,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "IN",+ "x": 3.6,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
package.json+151−4@@ -1,6 +1,6 @@ { "slug": "lp2951acm-3-3",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,153 @@ "docs/hero.png", "docs/lp2951acm-3-3-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "lp2951acm-3-3-etched.step",+ "lp2951acm-3-3-hero.glb",+ "lp2951acm-3-3-hero.overlay.json"+ ],+ "component": {+ "mpn": "LP2951ACM-3.3",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lp2951-n",+ "parts": {+ "symbol": "lp2951acm-3-3.kicad_sym",+ "footprint": "lp2951acm-3-3.kicad_mod",+ "model_3d": "lp2951acm-3-3-hero.glb",+ "model_3d_plain": "lp2951acm-3-3.glb",+ "model_3d_step": "lp2951acm-3-3-etched.step",+ "model_3d_step_plain": "lp2951acm-3-3.step",+ "lbr": "lp2951acm-3-3.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output voltage (3.3 V nominal, ±0.5% typ). Sourced through internal PMOS pass element; rated to 100 mA. Requires an output capacitor (≥ 2.2 µF for 3.3-V version) with ESR of 10 mΩ-6 Ω for stability."+ },+ {+ "number": "2",+ "name": "SENSE",+ "type": "input",+ "description": "Output voltage sense (Kelvin-sense) input for the internal error amplifier. Normally tied to OUT (pin 1) at the load to compensate for IR drop in the output trace. Do not leave floating."+ },+ {+ "number": "3",+ "name": "SHUTDOWN",+ "type": "input",+ "description": "Logic-level shutdown control. Regulator ON when driven low (≤ 0.6 V ensured over -40 °C to 125 °C); regulator OFF when driven high (≥ 2 V). Input threshold typ 1.3 V; may be tied to IN or driven from CMOS/TTL logic."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference and return for internal circuitry. On the WSON (NGT) variant the exposed DAP must also be connected to this pin/GND."+ },+ {+ "number": "5",+ "name": "ERROR",+ "type": "output",+ "description": "Open-collector active-low error flag. Pulls low when the output falls ~5% below nominal (dropout / undervoltage warning); useful as a power-on-reset. Off-state leakage ≤ 1 µA at 30 V; VOL ≤ 250 mV at IOL = 400 µA. Requires an external pull-up resistor."+ },+ {+ "number": "6",+ "name": "VTAP",+ "type": "output",+ "description": "Output of the internal resistor divider tap (nominally 1.235 V reference for the 3.3-V fixed configuration). Tie to FEEDBACK (pin 7) to select the factory-preset 3.3-V output; leave open (or tie to an external divider node) when programming a custom output voltage."+ },+ {+ "number": "7",+ "name": "FEEDBACK",+ "type": "input",+ "description": "Error-amplifier feedback input; internally regulated to VREF ≈ 1.235 V. Tie to VTAP (pin 6) for the fixed 3.3-V output, or connect to an external R1/R2 divider from OUT to program 1.24 V ≤ VOUT ≤ 29 V. Input bias current ~20 nA (typ)."+ },+ {+ "number": "8",+ "name": "IN",+ "type": "power_in",+ "description": "Input supply voltage, 2.3 V to 30 V. Requires a bypass capacitor (≥ 1 µF) close to the pin. Dropout is typically 40 mV at 100 µA and 380 mV at 100 mA of load."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lp2951-n",+ "pages": null,+ "sha256": "b9e1f8851a20b9c9",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lp2951acm-3-3.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lp2951acm-3-3-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "3903e8928727c48fa6e9637391d72c7749757851c40dca28d0435d9e61936ba1",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "LP2951ACM-3.3",+ "brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "SOIC-8",+ "Category": "Power Management (PMIC)",+ "Pins": "8"+ }+ },+ "discovery_triggers": [+ "lp2951acm-3.3"+ ],+ "discovery_pitch": "LP2951ACM-3.3 (Texas Instruments) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+10−7@@ -4,7 +4,7 @@ "slug": "lp2951acm-3-3", "title": "LP2951ACM-3.3", "brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -204,10 +204,13 @@ "docs/hero.png", "docs/lp2951acm-3-3-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "lp2951acm-3-3-etched.step",+ "lp2951acm-3-3-hero.glb",+ "lp2951acm-3-3-hero.overlay.json" ],- "visibility": {- "public": true- },- "updated_at": "2026-09-28T17:48:08.438Z"-}+ "visibility": "public",+ "updated_at": "2026-09-28T17:48:08.438Z",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}